Commit c9f88aa9 authored by Jose Alberto Reguero's avatar Jose Alberto Reguero Committed by Mauro Carvalho Chehab

[media] ttusb2: add support for the dvb-t part of CT-3650 v3

Signed-off-by: default avatarJose Alberto Reguero <jareguero@telefonica.net>
Reviewed-by: default avatarAntti Palosaari <crope@iki.fi>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 84b27148
......@@ -30,6 +30,7 @@
#include "tda826x.h"
#include "tda10086.h"
#include "tda1002x.h"
#include "tda10048.h"
#include "tda827x.h"
#include "lnbp21.h"
......@@ -82,7 +83,7 @@ static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
{
struct dvb_usb_device *d = i2c_get_adapdata(adap);
static u8 obuf[60], ibuf[60];
int i,read;
int i, write_read, read;
if (mutex_lock_interruptible(&d->i2c_mutex) < 0)
return -EAGAIN;
......@@ -91,28 +92,35 @@ static int ttusb2_i2c_xfer(struct i2c_adapter *adap,struct i2c_msg msg[],int num
warn("more than 2 i2c messages at a time is not handled yet. TODO.");
for (i = 0; i < num; i++) {
read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
write_read = i+1 < num && (msg[i+1].flags & I2C_M_RD);
read = msg[i].flags & I2C_M_RD;
obuf[0] = (msg[i].addr << 1) | read;
obuf[1] = msg[i].len;
obuf[0] = (msg[i].addr << 1) | (write_read | read);
if (read)
obuf[1] = 0;
else
obuf[1] = msg[i].len;
/* read request */
if (read)
if (write_read)
obuf[2] = msg[i+1].len;
else if (read)
obuf[2] = msg[i].len;
else
obuf[2] = 0;
memcpy(&obuf[3],msg[i].buf,msg[i].len);
memcpy(&obuf[3], msg[i].buf, msg[i].len);
if (ttusb2_msg(d, CMD_I2C_XFER, obuf, msg[i].len+3, ibuf, obuf[2] + 3) < 0) {
err("i2c transfer failed.");
break;
}
if (read) {
memcpy(msg[i+1].buf,&ibuf[3],msg[i+1].len);
if (write_read) {
memcpy(msg[i+1].buf, &ibuf[3], msg[i+1].len);
i++;
}
} else if (read)
memcpy(msg[i].buf, &ibuf[3], msg[i].len);
}
mutex_unlock(&d->i2c_mutex);
......@@ -190,6 +198,25 @@ static struct tda10023_config tda10023_config = {
.deltaf = 0xa511,
};
static struct tda10048_config tda10048_config = {
.demod_address = 0x10 >> 1,
.output_mode = TDA10048_PARALLEL_OUTPUT,
.inversion = TDA10048_INVERSION_ON,
.dtv6_if_freq_khz = TDA10048_IF_4000,
.dtv7_if_freq_khz = TDA10048_IF_4500,
.dtv8_if_freq_khz = TDA10048_IF_5000,
.clk_freq_khz = TDA10048_CLK_16000,
.no_firmware = 1,
.set_pll = true ,
.pll_m = 5,
.pll_n = 3,
.pll_p = 0,
};
static struct tda827x_config tda827x_config = {
.config = 0,
};
static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev,0,3) < 0)
......@@ -203,20 +230,56 @@ static int ttusb2_frontend_tda10086_attach(struct dvb_usb_adapter *adap)
return 0;
}
static int ttusb2_ct3650_i2c_gate_ctrl(struct dvb_frontend *fe, int enable)
{
struct dvb_usb_adapter *adap = fe->dvb->priv;
return adap->fe[0]->ops.i2c_gate_ctrl(adap->fe[0], enable);
}
static int ttusb2_frontend_tda10023_attach(struct dvb_usb_adapter *adap)
{
if (usb_set_interface(adap->dev->udev, 0, 3) < 0)
err("set interface to alts=3 failed");
if ((adap->fe[0] = dvb_attach(tda10023_attach, &tda10023_config, &adap->dev->i2c_adap, 0x48)) == NULL) {
deb_info("TDA10023 attach failed\n");
return -ENODEV;
if (adap->fe[0] == NULL) {
/* FE 0 DVB-C */
adap->fe[0] = dvb_attach(tda10023_attach,
&tda10023_config, &adap->dev->i2c_adap, 0x48);
if (adap->fe[0] == NULL) {
deb_info("TDA10023 attach failed\n");
return -ENODEV;
}
} else {
adap->fe[1] = dvb_attach(tda10048_attach,
&tda10048_config, &adap->dev->i2c_adap);
if (adap->fe[1] == NULL) {
deb_info("TDA10048 attach failed\n");
return -ENODEV;
}
/* tuner is behind TDA10023 I2C-gate */
adap->fe[1]->ops.i2c_gate_ctrl = ttusb2_ct3650_i2c_gate_ctrl;
}
return 0;
}
static int ttusb2_tuner_tda827x_attach(struct dvb_usb_adapter *adap)
{
if (dvb_attach(tda827x_attach, adap->fe[0], 0x61, &adap->dev->i2c_adap, NULL) == NULL) {
struct dvb_frontend *fe;
/* MFE: select correct FE to attach tuner since that's called twice */
if (adap->fe[1] == NULL)
fe = adap->fe[0];
else
fe = adap->fe[1];
/* attach tuner */
if (dvb_attach(tda827x_attach, fe, 0x61, &adap->dev->i2c_adap, &tda827x_config) == NULL) {
printk(KERN_ERR "%s: No tda827x found!\n", __func__);
return -ENODEV;
}
......@@ -385,6 +448,7 @@ static struct dvb_usb_device_properties ttusb2_properties_ct3650 = {
{
.streaming_ctrl = NULL,
.num_frontends = 2,
.frontend_attach = ttusb2_frontend_tda10023_attach,
.tuner_attach = ttusb2_tuner_tda827x_attach,
......
......@@ -206,15 +206,16 @@ static struct init_tab {
static struct pll_tab {
u32 clk_freq_khz;
u32 if_freq_khz;
u8 m, n, p;
} pll_tab[] = {
{ TDA10048_CLK_4000, TDA10048_IF_36130, 10, 0, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_3300, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_3500, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_3800, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_4000, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_4300, 10, 3, 0 },
{ TDA10048_CLK_16000, TDA10048_IF_36130, 10, 3, 0 },
{ TDA10048_CLK_4000, TDA10048_IF_36130 },
{ TDA10048_CLK_16000, TDA10048_IF_3300 },
{ TDA10048_CLK_16000, TDA10048_IF_3500 },
{ TDA10048_CLK_16000, TDA10048_IF_3800 },
{ TDA10048_CLK_16000, TDA10048_IF_4000 },
{ TDA10048_CLK_16000, TDA10048_IF_4300 },
{ TDA10048_CLK_16000, TDA10048_IF_4500 },
{ TDA10048_CLK_16000, TDA10048_IF_5000 },
{ TDA10048_CLK_16000, TDA10048_IF_36130 },
};
static int tda10048_writereg(struct tda10048_state *state, u8 reg, u8 data)
......@@ -460,9 +461,6 @@ static int tda10048_set_if(struct dvb_frontend *fe, enum fe_bandwidth bw)
state->freq_if_hz = pll_tab[i].if_freq_khz * 1000;
state->xtal_hz = pll_tab[i].clk_freq_khz * 1000;
state->pll_mfactor = pll_tab[i].m;
state->pll_nfactor = pll_tab[i].n;
state->pll_pfactor = pll_tab[i].p;
break;
}
}
......@@ -781,6 +779,10 @@ static int tda10048_init(struct dvb_frontend *fe)
dprintk(1, "%s()\n", __func__);
/* PLL */
init_tab[4].data = (u8)(state->pll_mfactor);
init_tab[5].data = (u8)(state->pll_nfactor) | 0x40;
/* Apply register defaults */
for (i = 0; i < ARRAY_SIZE(init_tab); i++)
tda10048_writereg(state, init_tab[i].reg, init_tab[i].data);
......@@ -1123,7 +1125,7 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
/* setup the state and clone the config */
memcpy(&state->config, config, sizeof(*config));
state->i2c = i2c;
state->fwloaded = 0;
state->fwloaded = config->no_firmware;
state->bandwidth = BANDWIDTH_8_MHZ;
/* check if the demod is present */
......@@ -1135,6 +1137,17 @@ struct dvb_frontend *tda10048_attach(const struct tda10048_config *config,
sizeof(struct dvb_frontend_ops));
state->frontend.demodulator_priv = state;
/* set pll */
if (config->set_pll) {
state->pll_mfactor = config->pll_m;
state->pll_nfactor = config->pll_n;
state->pll_pfactor = config->pll_p;
} else {
state->pll_mfactor = 10;
state->pll_nfactor = 3;
state->pll_pfactor = 0;
}
/* Establish any defaults the the user didn't pass */
tda10048_establish_defaults(&state->frontend);
......
......@@ -51,6 +51,7 @@ struct tda10048_config {
#define TDA10048_IF_4300 4300
#define TDA10048_IF_4500 4500
#define TDA10048_IF_4750 4750
#define TDA10048_IF_5000 5000
#define TDA10048_IF_36130 36130
u16 dtv6_if_freq_khz;
u16 dtv7_if_freq_khz;
......@@ -62,6 +63,13 @@ struct tda10048_config {
/* Disable I2C gate access */
u8 disable_gate_access;
bool no_firmware;
bool set_pll;
u8 pll_m;
u8 pll_p;
u8 pll_n;
};
#if defined(CONFIG_DVB_TDA10048) || \
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment