Commit ca1ba7ca authored by David S. Miller's avatar David S. Miller

Merge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/net-next

Conflicts:
	drivers/net/ethernet/intel/e1000e/netdev.c
parents 6461be3a 66f32a8b
......@@ -461,8 +461,9 @@ struct e1000_info {
#define E1000_RX_DESC_PS(R, i) \
(&(((union e1000_rx_desc_packet_split *)((R).desc))[i]))
#define E1000_RX_DESC_EXT(R, i) \
(&(((union e1000_rx_desc_extended *)((R).desc))[i]))
#define E1000_GET_DESC(R, i, type) (&(((struct type *)((R).desc))[i]))
#define E1000_RX_DESC(R, i) E1000_GET_DESC(R, i, e1000_rx_desc)
#define E1000_TX_DESC(R, i) E1000_GET_DESC(R, i, e1000_tx_desc)
#define E1000_CONTEXT_DESC(R, i) E1000_GET_DESC(R, i, e1000_context_desc)
......
......@@ -1195,7 +1195,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
goto err_nomem;
}
rx_ring->size = rx_ring->count * sizeof(struct e1000_rx_desc);
rx_ring->size = rx_ring->count * sizeof(union e1000_rx_desc_extended);
rx_ring->desc = dma_alloc_coherent(&pdev->dev, rx_ring->size,
&rx_ring->dma, GFP_KERNEL);
if (!rx_ring->desc) {
......@@ -1221,7 +1221,7 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ew32(RCTL, rctl);
for (i = 0; i < rx_ring->count; i++) {
struct e1000_rx_desc *rx_desc = E1000_RX_DESC(*rx_ring, i);
union e1000_rx_desc_extended *rx_desc;
struct sk_buff *skb;
skb = alloc_skb(2048 + NET_IP_ALIGN, GFP_KERNEL);
......@@ -1239,8 +1239,9 @@ static int e1000_setup_desc_rings(struct e1000_adapter *adapter)
ret_val = 8;
goto err_nomem;
}
rx_desc->buffer_addr =
cpu_to_le64(rx_ring->buffer_info[i].dma);
rx_desc = E1000_RX_DESC_EXT(*rx_ring, i);
rx_desc->read.buffer_addr =
cpu_to_le64(rx_ring->buffer_info[i].dma);
memset(skb->data, 0x00, skb->len);
}
......
This diff is collapsed.
......@@ -91,13 +91,16 @@
#define IXGBE_RX_BUFFER_WRITE 16 /* Must be power of 2 */
#define IXGBE_TX_FLAGS_CSUM (u32)(1)
#define IXGBE_TX_FLAGS_VLAN (u32)(1 << 1)
#define IXGBE_TX_FLAGS_TSO (u32)(1 << 2)
#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 3)
#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 4)
#define IXGBE_TX_FLAGS_FSO (u32)(1 << 5)
#define IXGBE_TX_FLAGS_HW_VLAN (u32)(1 << 1)
#define IXGBE_TX_FLAGS_SW_VLAN (u32)(1 << 2)
#define IXGBE_TX_FLAGS_TSO (u32)(1 << 3)
#define IXGBE_TX_FLAGS_IPV4 (u32)(1 << 4)
#define IXGBE_TX_FLAGS_FCOE (u32)(1 << 5)
#define IXGBE_TX_FLAGS_FSO (u32)(1 << 6)
#define IXGBE_TX_FLAGS_MAPPED_AS_PAGE (u32)(1 << 7)
#define IXGBE_TX_FLAGS_VLAN_MASK 0xffff0000
#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0x0000e000
#define IXGBE_TX_FLAGS_VLAN_PRIO_MASK 0xe0000000
#define IXGBE_TX_FLAGS_VLAN_PRIO_SHIFT 29
#define IXGBE_TX_FLAGS_VLAN_SHIFT 16
#define IXGBE_MAX_RSC_INT_RATE 162760
......@@ -141,14 +144,14 @@ struct vf_macvlans {
/* wrapper around a pointer to a socket buffer,
* so a DMA handle can be stored along with the buffer */
struct ixgbe_tx_buffer {
struct sk_buff *skb;
dma_addr_t dma;
union ixgbe_adv_tx_desc *next_to_watch;
unsigned long time_stamp;
u16 length;
u16 next_to_watch;
unsigned int bytecount;
dma_addr_t dma;
u32 length;
u32 tx_flags;
struct sk_buff *skb;
u32 bytecount;
u16 gso_segs;
u8 mapped_as_page;
};
struct ixgbe_rx_buffer {
......
......@@ -414,7 +414,7 @@ static u8 ixgbe_dcbnl_set_all(struct net_device *netdev)
u8 prio_tc[MAX_TRAFFIC_CLASS] = {0, 1, 2, 3, 4, 5, 6, 7};
int max_frame = adapter->netdev->mtu + ETH_HLEN + ETH_FCS_LEN;
#ifdef CONFIG_FCOE
#ifdef IXGBE_FCOE
if (adapter->netdev->features & NETIF_F_FCOE_MTU)
max_frame = max(max_frame, IXGBE_FCOE_JUMBO_FRAME_SIZE);
#endif
......
......@@ -241,10 +241,12 @@ static int ixgbe_fcoe_ddp_setup(struct net_device *netdev, u16 xid,
*/
if (lastsize == bufflen) {
if (j >= IXGBE_BUFFCNT_MAX) {
e_err(drv, "xid=%x:%d,%d,%d:addr=%llx "
"not enough user buffers. We need an extra "
"buffer because lastsize is bufflen.\n",
xid, i, j, dmacount, (u64)addr);
printk_once("Will NOT use DDP since there are not "
"enough user buffers. We need an extra "
"buffer because lastsize is bufflen. "
"xid=%x:%d,%d,%d:addr=%llx\n",
xid, i, j, dmacount, (u64)addr);
goto out_noddp_free;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment