net/ncsi: Add NCSI Broadcom OEM command

This patch adds OEM Broadcom commands and response handling. It also
defines OEM Get MAC Address handler to get and configure the device.

ncsi_oem_gma_handler_bcm: This handler send NCSI broadcom command for
getting mac address.
ncsi_rsp_handler_oem_bcm: This handles response received for all
broadcom OEM commands.
ncsi_rsp_handler_oem_bcm_gma: This handles get mac address response and
set it to device.
Signed-off-by: Vijay Khemka <vijaykhemka@fb.com>
Reviewed-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ncsi/Kconfig

@@ -10,3 +10,9 @@ config NET_NCSI
 	  support. Enable this only if your system connects to a network
 	  device via NCSI and the ethernet driver you're using supports
 	  the protocol explicitly.
+config NCSI_OEM_CMD_GET_MAC
+	bool "Get NCSI OEM MAC Address"
+	depends on NET_NCSI
+	---help---
+	  This allows to get MAC address from NCSI firmware and set them back to
+		controller.

net/ncsi/internal.h

@@ -71,6 +71,13 @@ enum {
 /* OEM Vendor Manufacture ID */
 #define NCSI_OEM_MFR_MLX_ID             0x8119
 #define NCSI_OEM_MFR_BCM_ID             0x113d
+/* Broadcom specific OEM Command */
+#define NCSI_OEM_BCM_CMD_GMA            0x01   /* CMD ID for Get MAC */
+/* OEM Command payload lengths*/
+#define NCSI_OEM_BCM_CMD_GMA_LEN        12
+/* Mac address offset in OEM response */
+#define BCM_MAC_ADDR_OFFSET             28
+
 
 struct ncsi_channel_version {
 	u32 version;		/* Supported BCD encoded NCSI version */
@@ -246,6 +253,7 @@ enum {
 	ncsi_dev_state_probe_dp,
 	ncsi_dev_state_config_sp	= 0x0301,
 	ncsi_dev_state_config_cis,
+	ncsi_dev_state_config_oem_gma,
 	ncsi_dev_state_config_clear_vids,
 	ncsi_dev_state_config_svf,
 	ncsi_dev_state_config_ev,
@@ -279,6 +287,7 @@ struct ncsi_dev_priv {
 #define NCSI_DEV_PROBED		1            /* Finalized NCSI topology    */
 #define NCSI_DEV_HWA		2            /* Enabled HW arbitration     */
 #define NCSI_DEV_RESHUFFLE	4
+	unsigned int        gma_flag;        /* OEM GMA flag               */
 	spinlock_t          lock;            /* Protect the NCSI device    */
 #if IS_ENABLED(CONFIG_IPV6)
 	unsigned int        inet6_addr_num;  /* Number of IPv6 addresses   */

net/ncsi/ncsi-manage.c

@@ -651,6 +651,72 @@ static int set_one_vid(struct ncsi_dev_priv *ndp, struct ncsi_channel *nc,
 	return 0;
 }
 
+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
+
+/* NCSI OEM Command APIs */
+static int ncsi_oem_gma_handler_bcm(struct ncsi_cmd_arg *nca)
+{
+	unsigned char data[NCSI_OEM_BCM_CMD_GMA_LEN];
+	int ret = 0;
+
+	nca->payload = NCSI_OEM_BCM_CMD_GMA_LEN;
+
+	memset(data, 0, NCSI_OEM_BCM_CMD_GMA_LEN);
+	*(unsigned int *)data = ntohl(NCSI_OEM_MFR_BCM_ID);
+	data[5] = NCSI_OEM_BCM_CMD_GMA;
+
+	nca->data = data;
+
+	ret = ncsi_xmit_cmd(nca);
+	if (ret)
+		netdev_err(nca->ndp->ndev.dev,
+			   "NCSI: Failed to transmit cmd 0x%x during configure\n",
+			   nca->type);
+	return ret;
+}
+
+/* OEM Command handlers initialization */
+static struct ncsi_oem_gma_handler {
+	unsigned int	mfr_id;
+	int		(*handler)(struct ncsi_cmd_arg *nca);
+} ncsi_oem_gma_handlers[] = {
+	{ NCSI_OEM_MFR_BCM_ID, ncsi_oem_gma_handler_bcm }
+};
+
+static int ncsi_gma_handler(struct ncsi_cmd_arg *nca, unsigned int mf_id)
+{
+	struct ncsi_oem_gma_handler *nch = NULL;
+	int i;
+
+	/* This function should only be called once, return if flag set */
+	if (nca->ndp->gma_flag == 1)
+		return -1;
+
+	/* Find gma handler for given manufacturer id */
+	for (i = 0; i < ARRAY_SIZE(ncsi_oem_gma_handlers); i++) {
+		if (ncsi_oem_gma_handlers[i].mfr_id == mf_id) {
+			if (ncsi_oem_gma_handlers[i].handler)
+				nch = &ncsi_oem_gma_handlers[i];
+			break;
+			}
+	}
+
+	if (!nch) {
+		netdev_err(nca->ndp->ndev.dev,
+			   "NCSI: No GMA handler available for MFR-ID (0x%x)\n",
+			   mf_id);
+		return -1;
+	}
+
+	/* Set the flag for GMA command which should only be called once */
+	nca->ndp->gma_flag = 1;
+
+	/* Get Mac address from NCSI device */
+	return nch->handler(nca);
+}
+
+#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
+
 static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 {
 	struct ncsi_dev *nd = &ndp->ndev;
@@ -701,7 +767,23 @@ static void ncsi_configure_channel(struct ncsi_dev_priv *ndp)
 			goto error;
 		}
 
+		nd->state = ncsi_dev_state_config_oem_gma;
+		break;
+	case ncsi_dev_state_config_oem_gma:
 		nd->state = ncsi_dev_state_config_clear_vids;
+		ret = -1;
+
+#if IS_ENABLED(CONFIG_NCSI_OEM_CMD_GET_MAC)
+		nca.type = NCSI_PKT_CMD_OEM;
+		nca.package = np->id;
+		nca.channel = nc->id;
+		ndp->pending_req_num = 1;
+		ret = ncsi_gma_handler(&nca, nc->version.mf_id);
+#endif /* CONFIG_NCSI_OEM_CMD_GET_MAC */
+
+		if (ret < 0)
+			schedule_work(&ndp->work);
+
 		break;
 	case ncsi_dev_state_config_clear_vids:
 	case ncsi_dev_state_config_svf:

net/ncsi/ncsi-pkt.h

@@ -165,6 +165,14 @@ struct ncsi_rsp_oem_pkt {
 	unsigned char           data[];      /* Payload data      */
 };
 
+/* Broadcom Response Data */
+struct ncsi_rsp_oem_bcm_pkt {
+	unsigned char           ver;         /* Payload Version   */
+	unsigned char           type;        /* OEM Command type  */
+	__be16                  len;         /* Payload Length    */
+	unsigned char           data[];      /* Cmd specific Data */
+};
+
 /* Get Link Status */
 struct ncsi_rsp_gls_pkt {
 	struct ncsi_rsp_pkt_hdr rsp;        /* Response header   */

net/ncsi/ncsi-rsp.c

@@ -611,19 +611,59 @@ static int ncsi_rsp_handler_snfc(struct ncsi_request *nr)
 	return 0;
 }
 
+/* Response handler for Broadcom command Get Mac Address */
+static int ncsi_rsp_handler_oem_bcm_gma(struct ncsi_request *nr)
+{
+	struct ncsi_dev_priv *ndp = nr->ndp;
+	struct net_device *ndev = ndp->ndev.dev;
+	const struct net_device_ops *ops = ndev->netdev_ops;
+	struct ncsi_rsp_oem_pkt *rsp;
+	struct sockaddr saddr;
+	int ret = 0;
+
+	/* Get the response header */
+	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+
+	saddr.sa_family = ndev->type;
+	ndev->priv_flags |= IFF_LIVE_ADDR_CHANGE;
+	memcpy(saddr.sa_data, &rsp->data[BCM_MAC_ADDR_OFFSET], ETH_ALEN);
+	/* Increase mac address by 1 for BMC's address */
+	saddr.sa_data[ETH_ALEN - 1]++;
+	ret = ops->ndo_set_mac_address(ndev, &saddr);
+	if (ret < 0)
+		netdev_warn(ndev, "NCSI: 'Writing mac address to device failed\n");
+
+	return ret;
+}
+
+/* Response handler for Broadcom card */
+static int ncsi_rsp_handler_oem_bcm(struct ncsi_request *nr)
+{
+	struct ncsi_rsp_oem_bcm_pkt *bcm;
+	struct ncsi_rsp_oem_pkt *rsp;
+
+	/* Get the response header */
+	rsp = (struct ncsi_rsp_oem_pkt *)skb_network_header(nr->rsp);
+	bcm = (struct ncsi_rsp_oem_bcm_pkt *)(rsp->data);
+
+	if (bcm->type == NCSI_OEM_BCM_CMD_GMA)
+		return ncsi_rsp_handler_oem_bcm_gma(nr);
+	return 0;
+}
+
 static struct ncsi_rsp_oem_handler {
 	unsigned int	mfr_id;
 	int		(*handler)(struct ncsi_request *nr);
 } ncsi_rsp_oem_handlers[] = {
 	{ NCSI_OEM_MFR_MLX_ID, NULL },
-	{ NCSI_OEM_MFR_BCM_ID, NULL }
+	{ NCSI_OEM_MFR_BCM_ID, ncsi_rsp_handler_oem_bcm }
 };
 
 /* Response handler for OEM command */
 static int ncsi_rsp_handler_oem(struct ncsi_request *nr)
 {
-	struct ncsi_rsp_oem_pkt *rsp;
 	struct ncsi_rsp_oem_handler *nrh = NULL;
+	struct ncsi_rsp_oem_pkt *rsp;
 	unsigned int mfr_id, i;
 
 	/* Get the response header */