[libata] bump versions

Bump versions based on changes submitted during 2.6.21 merge window.
Signed-off-by: Jeff Garzik <jeff@garzik.org>

drivers/ata/ahci.c

@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ahci"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 
 enum {

drivers/ata/ata_generic.c

@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "ata_generic"
-#define DRV_VERSION "0.2.10"
+#define DRV_VERSION "0.2.11"
 
 /*
  *	A generic parallel ATA driver using libata

drivers/ata/ata_piix.c

@@ -93,7 +93,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"ata_piix"
-#define DRV_VERSION	"2.00ac7"
+#define DRV_VERSION	"2.10"
 
 enum {
 	PIIX_IOCFG		= 0x54, /* IDE I/O configuration register */

drivers/ata/libata-core.c

@@ -59,7 +59,7 @@
 
 #include "libata.h"
 
-#define DRV_VERSION	"2.10"	/* must be exactly four chars */
+#define DRV_VERSION	"2.20"	/* must be exactly four chars */
 
 
 /* debounce timing parameters in msecs { interval, duration, timeout } */

drivers/ata/pata_ali.c

@@ -34,7 +34,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME "pata_ali"
-#define DRV_VERSION "0.7.2"
+#define DRV_VERSION "0.7.3"
 
 /*
  *	Cable special cases

drivers/ata/pata_amd.c

@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_amd"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
 
 /**
  *	timing_setup		-	shared timing computation and load

drivers/ata/pata_cs5520.c

@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_cs5520"
-#define DRV_VERSION	"0.6.3"
+#define DRV_VERSION	"0.6.4"
 
 struct pio_clocks
 {

drivers/ata/pata_cs5530.c

@@ -35,7 +35,7 @@
 #include <linux/dmi.h>
 
 #define DRV_NAME	"pata_cs5530"
-#define DRV_VERSION	"0.7.1"
+#define DRV_VERSION	"0.7.2"
 
 static void __iomem *cs5530_port_base(struct ata_port *ap)
 {

drivers/ata/pata_hpt366.c

@@ -27,7 +27,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt366"
-#define DRV_VERSION	"0.5.3"
+#define DRV_VERSION	"0.6.0"
 
 struct hpt_clock {
 	u8	xfer_speed;

drivers/ata/pata_hpt37x.c

@@ -25,7 +25,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_hpt37x"
-#define DRV_VERSION	"0.5.2"
+#define DRV_VERSION	"0.6.0"
 
 struct hpt_clock {
 	u8	xfer_speed;

drivers/ata/pata_isapnp.c

@@ -17,7 +17,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_isapnp"
-#define DRV_VERSION "0.1.5"
+#define DRV_VERSION "0.2.0"
 
 static struct scsi_host_template isapnp_sht = {
 	.module			= THIS_MODULE,

drivers/ata/pata_it821x.c

@@ -80,7 +80,7 @@
 
 
 #define DRV_NAME "pata_it821x"
-#define DRV_VERSION "0.3.3"
+#define DRV_VERSION "0.3.4"
 
 struct it821x_dev
 {

drivers/ata/pata_ixp4xx_cf.c

@@ -23,7 +23,7 @@
 #include <scsi/scsi_host.h>
 
 #define DRV_NAME	"pata_ixp4xx_cf"
-#define DRV_VERSION	"0.1.1ac3"
+#define DRV_VERSION	"0.1.2"
 
 static int ixp4xx_set_mode(struct ata_port *ap, struct ata_device **error)
 {

drivers/ata/pata_legacy.c

@@ -64,7 +64,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_legacy"
-#define DRV_VERSION "0.5.3"
+#define DRV_VERSION "0.5.4"
 
 #define NR_HOST 6
 

drivers/ata/pata_opti.c

@@ -34,7 +34,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_opti"
-#define DRV_VERSION "0.2.7"
+#define DRV_VERSION "0.2.8"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */

drivers/ata/pata_optidma.c

@@ -33,7 +33,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_optidma"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.2.4"
 
 enum {
 	READ_REG	= 0,	/* index of Read cycle timing register */

drivers/ata/pata_pcmcia.c

@@ -42,7 +42,7 @@
 
 
 #define DRV_NAME "pata_pcmcia"
-#define DRV_VERSION "0.2.11"
+#define DRV_VERSION "0.3.0"
 
 /*
  *	Private data structure to glue stuff together

drivers/ata/pata_pdc2027x.c

@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pata_pdc2027x"
-#define DRV_VERSION	"0.74-ac5"
+#define DRV_VERSION	"0.8"
 #undef PDC_DEBUG
 
 #ifdef PDC_DEBUG

drivers/ata/pata_pdc202xx_old.c

@@ -21,7 +21,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_pdc202xx_old"
-#define DRV_VERSION "0.2.3"
+#define DRV_VERSION "0.3.0"
 
 /**
  *	pdc2024x_pre_reset		-	probe begin

drivers/ata/pata_qdi.c

@@ -26,7 +26,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_qdi"
-#define DRV_VERSION "0.2.4"
+#define DRV_VERSION "0.3.0"
 
 #define NR_HOST 4	/* Two 6580s */
 

drivers/ata/pata_serverworks.c

@@ -41,7 +41,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_serverworks"
-#define DRV_VERSION "0.3.9"
+#define DRV_VERSION "0.4.0"
 
 #define SVWKS_CSB5_REVISION_NEW	0x92 /* min PCI_REVISION_ID for UDMA5 (A2.0) */
 #define SVWKS_CSB6_REVISION	0xa0 /* min PCI_REVISION_ID for UDMA4 (A1.0) */

drivers/ata/pata_sis.c

@@ -35,7 +35,7 @@
 #include "sis.h"
 
 #define DRV_NAME	"pata_sis"
-#define DRV_VERSION	"0.4.5"
+#define DRV_VERSION	"0.5.0"
 
 struct sis_chipset {
 	u16 device;			/* PCI host ID */

drivers/ata/pata_sl82c105.c

@@ -26,7 +26,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME "pata_sl82c105"
-#define DRV_VERSION "0.2.5"
+#define DRV_VERSION "0.3.0"
 
 enum {
 	/*

drivers/ata/pata_winbond.c

@@ -17,7 +17,7 @@
 #include <linux/platform_device.h>
 
 #define DRV_NAME "pata_winbond"
-#define DRV_VERSION "0.0.1"
+#define DRV_VERSION "0.0.2"
 
 #define NR_HOST 4	/* Two winbond controllers, two channels each */
 

drivers/ata/pdc_adma.c

@@ -44,7 +44,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"pdc_adma"
-#define DRV_VERSION	"0.04"
+#define DRV_VERSION	"0.05"
 
 /* macro to calculate base address for ATA regs */
 #define ADMA_ATA_REGS(base,port_no)	((base) + ((port_no) * 0x40))

drivers/ata/sata_mv.c

@@ -35,7 +35,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_mv"
-#define DRV_VERSION	"0.7"
+#define DRV_VERSION	"0.8"
 
 enum {
 	/* BAR's are enumerated in terms of pci_resource_start() terms */

drivers/ata/sata_promise.c

@@ -45,7 +45,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_promise"
-#define DRV_VERSION	"1.05"
+#define DRV_VERSION	"2.00"
 
 
 enum {

drivers/ata/sata_qstor.c

@@ -39,7 +39,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_qstor"
-#define DRV_VERSION	"0.06"
+#define DRV_VERSION	"0.07"
 
 enum {
 	QS_MMIO_BAR		= 4,

drivers/ata/sata_sil.c

@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum {
 	SIL_MMIO_BAR		= 5,

drivers/ata/sata_sil24.c

@@ -30,7 +30,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_sil24"
-#define DRV_VERSION	"0.3"
+#define DRV_VERSION	"0.8"
 
 /*
  * Port request block (PRB) 32 bytes

drivers/ata/sata_svw.c

@@ -53,7 +53,7 @@
 #endif /* CONFIG_PPC_OF */
 
 #define DRV_NAME	"sata_svw"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum {
 	K2_FLAG_NO_ATAPI_DMA		= (1 << 29),

drivers/ata/sata_sx4.c

@@ -44,7 +44,7 @@
 #include "sata_promise.h"
 
 #define DRV_NAME	"sata_sx4"
-#define DRV_VERSION	"0.9"
+#define DRV_VERSION	"0.10"
 
 
 enum {

drivers/ata/sata_uli.c

@@ -36,7 +36,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_uli"
-#define DRV_VERSION	"1.0"
+#define DRV_VERSION	"1.1"
 
 enum {
 	uli_5289		= 0,

drivers/ata/sata_via.c

@@ -46,7 +46,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_via"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum board_ids_enum {
 	vt6420,

drivers/ata/sata_vsc.c

@@ -47,7 +47,7 @@
 #include <linux/libata.h>
 
 #define DRV_NAME	"sata_vsc"
-#define DRV_VERSION	"2.0"
+#define DRV_VERSION	"2.1"
 
 enum {
 	VSC_MMIO_BAR			= 0,