[netdrvr] checkpatch cleanups

Signed-off-by: Jeff Garzik <jgarzik@redhat.com>

drivers/net/3c507.c

@@ -832,10 +832,11 @@ static void el16_rx(struct net_device *dev)
 
 		if (rfd_cmd != 0 || data_buffer_addr != rx_head + 22
 			|| (pkt_len & 0xC000) != 0xC000) {
-			printk("%s: Rx frame at %#x corrupted, status %04x cmd %04x "
-				   "next %04x data-buf @%04x %04x.\n", dev->name, rx_head,
-				   frame_status, rfd_cmd, next_rx_frame, data_buffer_addr,
-				   pkt_len);
+			printk(KERN_ERR "%s: Rx frame at %#x corrupted, "
+			       "status %04x cmd %04x next %04x "
+			       "data-buf @%04x %04x.\n",
+			       dev->name, rx_head, frame_status, rfd_cmd,
+			       next_rx_frame, data_buffer_addr, pkt_len);
 		} else if ((frame_status & 0x2000) == 0) {
 			/* Frame Rxed, but with error. */
 			dev->stats.rx_errors++;
@@ -851,7 +852,9 @@ static void el16_rx(struct net_device *dev)
 			pkt_len &= 0x3fff;
 			skb = dev_alloc_skb(pkt_len+2);
 			if (skb == NULL) {
-				printk("%s: Memory squeeze, dropping packet.\n", dev->name);
+				printk(KERN_ERR "%s: Memory squeeze, "
+				       "dropping packet.\n",
+				       dev->name);
 				dev->stats.rx_dropped++;
 				break;
 			}

drivers/net/at1700.c

@@ -465,8 +465,9 @@ static int __init at1700_probe1(struct net_device *dev, int ioaddr)
 	/* Snarf the interrupt vector now. */
 	ret = request_irq(irq, &net_interrupt, 0, DRV_NAME, dev);
 	if (ret) {
-		printk ("  AT1700 at %#3x is unusable due to a conflict on "
-				"IRQ %d.\n", ioaddr, irq);
+		printk(KERN_ERR "AT1700 at %#3x is unusable due to a "
+		       "conflict on IRQ %d.\n",
+		       ioaddr, irq);
 		goto err_mca;
 	}
 

drivers/net/bnx2x.c

@@ -8788,8 +8788,7 @@ static int __devinit bnx2x_init_board(struct pci_dev *pdev,
 	INIT_WORK(&bp->reset_task, bnx2x_reset_task);
 	INIT_WORK(&bp->sp_task, bnx2x_sp_task);
 
-	dev->base_addr = dev->mem_start = pci_resource_start(pdev, 0);
-	dev->mem_end = pci_resource_end(pdev, 0);
+	dev->base_addr = pci_resource_start(pdev, 0);
 
 	dev->irq = pdev->irq;
 

drivers/net/e1000/e1000_ethtool.c

@@ -743,7 +743,7 @@ static bool reg_pattern_test(struct e1000_adapter *adapter, uint64_t *data,
 		if (read != (write & test[i] & mask)) {
 			DPRINTK(DRV, ERR, "pattern test reg %04X failed: "
 				"got 0x%08X expected 0x%08X\n",
-			        reg, read, (write & test[i] & mask));
+				reg, read, (write & test[i] & mask));
 			*data = reg;
 			return true;
 		}

drivers/net/eexpress.c

@@ -784,8 +784,7 @@ static irqreturn_t eexp_irq(int dummy, void *dev_info)
 	old_read_ptr = inw(ioaddr+READ_PTR);
 	old_write_ptr = inw(ioaddr+WRITE_PTR);
 
-	outb(SIRQ_dis|irqrmap[dev->irq],ioaddr+SET_IRQ);
-
+	outb(SIRQ_dis|irqrmap[dev->irq], ioaddr+SET_IRQ);
 
 	status = scb_status(dev);
 
@@ -852,7 +851,7 @@ static irqreturn_t eexp_irq(int dummy, void *dev_info)
 
 	eexp_cmd_clear(dev);
 
-	outb(SIRQ_en|irqrmap[dev->irq],ioaddr+SET_IRQ);
+	outb(SIRQ_en|irqrmap[dev->irq], ioaddr+SET_IRQ);
 
 #if NET_DEBUG > 6
 	printk("%s: leaving eexp_irq()\n", dev->name);

drivers/net/lp486e.c

@@ -1144,7 +1144,7 @@ i596_handle_CU_completion(struct net_device *dev,
 }
 
 static irqreturn_t
-i596_interrupt (int irq, void *dev_instance)
+i596_interrupt(int irq, void *dev_instance)
 {
 	struct net_device *dev = dev_instance;
 	struct i596_private *lp = dev->priv;

drivers/net/tulip/de4x5.c

@@ -4168,7 +4168,7 @@ de4x5_bad_srom(struct de4x5_private *lp)
 {
     int i, status = 0;
 
-    for (i=0; i < ARRAY_SIZE(enet_det); i++) {
+    for (i = 0; i < ARRAY_SIZE(enet_det); i++) {
 	if (!de4x5_strncmp((char *)&lp->srom, (char *)&enet_det[i], 3) &&
 	    !de4x5_strncmp((char *)&lp->srom+0x10, (char *)&enet_det[i], 3)) {
 	    if (i == 0) {
@@ -4188,7 +4188,7 @@ de4x5_strncmp(char *a, char *b, int n)
 {
     int ret=0;
 
-    for (;n && !ret;n--) {
+    for (;n && !ret; n--) {
 	ret = *a++ - *b++;
     }