Commit cce1d9f2 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: move leds-clevo-mail's probe function to .devinit.text
  leds: Fix indentation in LEDS_LP3944 Kconfig entry
  leds: Fix LED names 
  leds: Fix leds-pca9532 whitespace issues
  leds: fix coding style in worker thread code for ledtrig-gpio.
  leds: gpio-leds: fix typographics fault
  leds: Add WM831x status LED driver
parents d910fc78 f16a5dba
...@@ -150,9 +150,9 @@ config LEDS_LP3944 ...@@ -150,9 +150,9 @@ config LEDS_LP3944
tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip" tristate "LED Support for N.S. LP3944 (Fun Light) I2C chip"
depends on LEDS_CLASS && I2C depends on LEDS_CLASS && I2C
help help
This option enables support for LEDs connected to the National This option enables support for LEDs connected to the National
Semiconductor LP3944 Lighting Management Unit (LMU) also known as Semiconductor LP3944 Lighting Management Unit (LMU) also known as
Fun Light Chip. Fun Light Chip.
To compile this driver as a module, choose M here: the To compile this driver as a module, choose M here: the
module will be called leds-lp3944. module will be called leds-lp3944.
...@@ -195,6 +195,13 @@ config LEDS_PCA955X ...@@ -195,6 +195,13 @@ config LEDS_PCA955X
LED driver chips accessed via the I2C bus. Supported LED driver chips accessed via the I2C bus. Supported
devices include PCA9550, PCA9551, PCA9552, and PCA9553. devices include PCA9550, PCA9551, PCA9552, and PCA9553.
config LEDS_WM831X_STATUS
tristate "LED support for status LEDs on WM831x PMICs"
depends on LEDS_CLASS && MFD_WM831X
help
This option enables support for the status LEDs of the WM831x
series of PMICs.
config LEDS_WM8350 config LEDS_WM8350
tristate "LED Support for WM8350 AudioPlus PMIC" tristate "LED Support for WM8350 AudioPlus PMIC"
depends on LEDS_CLASS && MFD_WM8350 depends on LEDS_CLASS && MFD_WM8350
......
...@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o ...@@ -26,6 +26,7 @@ obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
obj-$(CONFIG_LEDS_FSG) += leds-fsg.o obj-$(CONFIG_LEDS_FSG) += leds-fsg.o
obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o obj-$(CONFIG_LEDS_PCA955X) += leds-pca955x.o
obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o obj-$(CONFIG_LEDS_DA903X) += leds-da903x.o
obj-$(CONFIG_LEDS_WM831X_STATUS) += leds-wm831x-status.o
obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o obj-$(CONFIG_LEDS_WM8350) += leds-wm8350.o
obj-$(CONFIG_LEDS_PWM) += leds-pwm.o obj-$(CONFIG_LEDS_PWM) += leds-pwm.o
......
...@@ -153,7 +153,7 @@ static struct led_classdev clevo_mail_led = { ...@@ -153,7 +153,7 @@ static struct led_classdev clevo_mail_led = {
.flags = LED_CORE_SUSPENDRESUME, .flags = LED_CORE_SUSPENDRESUME,
}; };
static int __init clevo_mail_led_probe(struct platform_device *pdev) static int __devinit clevo_mail_led_probe(struct platform_device *pdev)
{ {
return led_classdev_register(&pdev->dev, &clevo_mail_led); return led_classdev_register(&pdev->dev, &clevo_mail_led);
} }
......
...@@ -28,7 +28,7 @@ static void qube_front_led_set(struct led_classdev *led_cdev, ...@@ -28,7 +28,7 @@ static void qube_front_led_set(struct led_classdev *led_cdev,
} }
static struct led_classdev qube_front_led = { static struct led_classdev qube_front_led = {
.name = "qube-front", .name = "qube::front",
.brightness = LED_FULL, .brightness = LED_FULL,
.brightness_set = qube_front_led_set, .brightness_set = qube_front_led_set,
.default_trigger = "ide-disk", .default_trigger = "ide-disk",
......
...@@ -49,7 +49,7 @@ static void raq_web_led_set(struct led_classdev *led_cdev, ...@@ -49,7 +49,7 @@ static void raq_web_led_set(struct led_classdev *led_cdev,
} }
static struct led_classdev raq_web_led = { static struct led_classdev raq_web_led = {
.name = "raq-web", .name = "raq::web",
.brightness_set = raq_web_led_set, .brightness_set = raq_web_led_set,
}; };
...@@ -70,7 +70,7 @@ static void raq_power_off_led_set(struct led_classdev *led_cdev, ...@@ -70,7 +70,7 @@ static void raq_power_off_led_set(struct led_classdev *led_cdev,
} }
static struct led_classdev raq_power_off_led = { static struct led_classdev raq_power_off_led = {
.name = "raq-power-off", .name = "raq::power-off",
.brightness_set = raq_power_off_led_set, .brightness_set = raq_power_off_led_set,
.default_trigger = "power-off", .default_trigger = "power-off",
}; };
......
...@@ -80,7 +80,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template, ...@@ -80,7 +80,7 @@ static int __devinit create_gpio_led(const struct gpio_led *template,
/* skip leds that aren't available */ /* skip leds that aren't available */
if (!gpio_is_valid(template->gpio)) { if (!gpio_is_valid(template->gpio)) {
printk(KERN_INFO "Skipping unavilable LED gpio %d (%s)\n", printk(KERN_INFO "Skipping unavailable LED gpio %d (%s)\n",
template->gpio, template->name); template->gpio, template->name);
return 0; return 0;
} }
......
...@@ -34,7 +34,7 @@ struct pca9532_data { ...@@ -34,7 +34,7 @@ struct pca9532_data {
struct i2c_client *client; struct i2c_client *client;
struct pca9532_led leds[16]; struct pca9532_led leds[16];
struct mutex update_lock; struct mutex update_lock;
struct input_dev *idev; struct input_dev *idev;
struct work_struct work; struct work_struct work;
u8 pwm[2]; u8 pwm[2];
u8 psc[2]; u8 psc[2];
...@@ -53,9 +53,9 @@ MODULE_DEVICE_TABLE(i2c, pca9532_id); ...@@ -53,9 +53,9 @@ MODULE_DEVICE_TABLE(i2c, pca9532_id);
static struct i2c_driver pca9532_driver = { static struct i2c_driver pca9532_driver = {
.driver = { .driver = {
.name = "pca9532", .name = "pca9532",
}, },
.probe = pca9532_probe, .probe = pca9532_probe,
.remove = pca9532_remove, .remove = pca9532_remove,
.id_table = pca9532_id, .id_table = pca9532_id,
}; };
...@@ -149,7 +149,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev, ...@@ -149,7 +149,7 @@ static int pca9532_set_blink(struct led_classdev *led_cdev,
if (*delay_on == 0 && *delay_off == 0) { if (*delay_on == 0 && *delay_off == 0) {
/* led subsystem ask us for a blink rate */ /* led subsystem ask us for a blink rate */
*delay_on = 1000; *delay_on = 1000;
*delay_off = 1000; *delay_off = 1000;
} }
if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6) if (*delay_on != *delay_off || *delay_on > 1690 || *delay_on < 6)
...@@ -227,7 +227,7 @@ static int pca9532_configure(struct i2c_client *client, ...@@ -227,7 +227,7 @@ static int pca9532_configure(struct i2c_client *client,
break; break;
case PCA9532_TYPE_LED: case PCA9532_TYPE_LED:
led->state = pled->state; led->state = pled->state;
led->name = pled->name; led->name = pled->name;
led->ldev.name = led->name; led->ldev.name = led->name;
led->ldev.brightness = LED_OFF; led->ldev.brightness = LED_OFF;
led->ldev.brightness_set = pca9532_set_brightness; led->ldev.brightness_set = pca9532_set_brightness;
...@@ -254,7 +254,7 @@ static int pca9532_configure(struct i2c_client *client, ...@@ -254,7 +254,7 @@ static int pca9532_configure(struct i2c_client *client,
data->idev->name = pled->name; data->idev->name = pled->name;
data->idev->phys = "i2c/pca9532"; data->idev->phys = "i2c/pca9532";
data->idev->id.bustype = BUS_HOST; data->idev->id.bustype = BUS_HOST;
data->idev->id.vendor = 0x001f; data->idev->id.vendor = 0x001f;
data->idev->id.product = 0x0001; data->idev->id.product = 0x0001;
data->idev->id.version = 0x0100; data->idev->id.version = 0x0100;
data->idev->evbit[0] = BIT_MASK(EV_SND); data->idev->evbit[0] = BIT_MASK(EV_SND);
......
/*
* LED driver for WM831x status LEDs
*
* Copyright(C) 2009 Wolfson Microelectronics PLC.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/leds.h>
#include <linux/err.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/status.h>
struct wm831x_status {
struct led_classdev cdev;
struct wm831x *wm831x;
struct work_struct work;
struct mutex mutex;
spinlock_t value_lock;
int reg; /* Control register */
int reg_val; /* Control register value */
int blink;
int blink_time;
int blink_cyc;
int src;
enum led_brightness brightness;
};
#define to_wm831x_status(led_cdev) \
container_of(led_cdev, struct wm831x_status, cdev)
static void wm831x_status_work(struct work_struct *work)
{
struct wm831x_status *led = container_of(work, struct wm831x_status,
work);
unsigned long flags;
mutex_lock(&led->mutex);
led->reg_val &= ~(WM831X_LED_SRC_MASK | WM831X_LED_MODE_MASK |
WM831X_LED_DUTY_CYC_MASK | WM831X_LED_DUR_MASK);
spin_lock_irqsave(&led->value_lock, flags);
led->reg_val |= led->src << WM831X_LED_SRC_SHIFT;
if (led->blink) {
led->reg_val |= 2 << WM831X_LED_MODE_SHIFT;
led->reg_val |= led->blink_time << WM831X_LED_DUR_SHIFT;
led->reg_val |= led->blink_cyc;
} else {
if (led->brightness != LED_OFF)
led->reg_val |= 1 << WM831X_LED_MODE_SHIFT;
}
spin_unlock_irqrestore(&led->value_lock, flags);
wm831x_reg_write(led->wm831x, led->reg, led->reg_val);
mutex_unlock(&led->mutex);
}
static void wm831x_status_set(struct led_classdev *led_cdev,
enum led_brightness value)
{
struct wm831x_status *led = to_wm831x_status(led_cdev);
unsigned long flags;
spin_lock_irqsave(&led->value_lock, flags);
led->brightness = value;
if (value == LED_OFF)
led->blink = 0;
schedule_work(&led->work);
spin_unlock_irqrestore(&led->value_lock, flags);
}
static int wm831x_status_blink_set(struct led_classdev *led_cdev,
unsigned long *delay_on,
unsigned long *delay_off)
{
struct wm831x_status *led = to_wm831x_status(led_cdev);
unsigned long flags;
int ret = 0;
/* Pick some defaults if we've not been given times */
if (*delay_on == 0 && *delay_off == 0) {
*delay_on = 250;
*delay_off = 250;
}
spin_lock_irqsave(&led->value_lock, flags);
/* We only have a limited selection of settings, see if we can
* support the configuration we're being given */
switch (*delay_on) {
case 1000:
led->blink_time = 0;
break;
case 250:
led->blink_time = 1;
break;
case 125:
led->blink_time = 2;
break;
case 62:
case 63:
/* Actually 62.5ms */
led->blink_time = 3;
break;
default:
ret = -EINVAL;
break;
}
if (ret == 0) {
switch (*delay_off / *delay_on) {
case 1:
led->blink_cyc = 0;
break;
case 3:
led->blink_cyc = 1;
break;
case 4:
led->blink_cyc = 2;
break;
case 8:
led->blink_cyc = 3;
break;
default:
ret = -EINVAL;
break;
}
}
if (ret == 0)
led->blink = 1;
else
led->blink = 0;
/* Always update; if we fail turn off blinking since we expect
* a software fallback. */
schedule_work(&led->work);
spin_unlock_irqrestore(&led->value_lock, flags);
return ret;
}
static const char *led_src_texts[] = {
"otp",
"power",
"charger",
"soft",
};
static ssize_t wm831x_status_src_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct wm831x_status *led = to_wm831x_status(led_cdev);
int i;
ssize_t ret = 0;
mutex_lock(&led->mutex);
for (i = 0; i < ARRAY_SIZE(led_src_texts); i++)
if (i == led->src)
ret += sprintf(&buf[ret], "[%s] ", led_src_texts[i]);
else
ret += sprintf(&buf[ret], "%s ", led_src_texts[i]);
mutex_unlock(&led->mutex);
ret += sprintf(&buf[ret], "\n");
return ret;
}
static ssize_t wm831x_status_src_store(struct device *dev,
struct device_attribute *attr,
const char *buf, size_t size)
{
struct led_classdev *led_cdev = dev_get_drvdata(dev);
struct wm831x_status *led = to_wm831x_status(led_cdev);
char name[20];
int i;
size_t len;
name[sizeof(name) - 1] = '\0';
strncpy(name, buf, sizeof(name) - 1);
len = strlen(name);
if (len && name[len - 1] == '\n')
name[len - 1] = '\0';
for (i = 0; i < ARRAY_SIZE(led_src_texts); i++) {
if (!strcmp(name, led_src_texts[i])) {
mutex_lock(&led->mutex);
led->src = i;
schedule_work(&led->work);
mutex_unlock(&led->mutex);
}
}
return size;
}
static DEVICE_ATTR(src, 0644, wm831x_status_src_show, wm831x_status_src_store);
static int wm831x_status_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *chip_pdata;
struct wm831x_status_pdata pdata;
struct wm831x_status *drvdata;
struct resource *res;
int id = pdev->id % ARRAY_SIZE(chip_pdata->status);
int ret;
res = platform_get_resource(pdev, IORESOURCE_IO, 0);
if (res == NULL) {
dev_err(&pdev->dev, "No I/O resource\n");
ret = -EINVAL;
goto err;
}
drvdata = kzalloc(sizeof(struct wm831x_status), GFP_KERNEL);
if (!drvdata)
return -ENOMEM;
dev_set_drvdata(&pdev->dev, drvdata);
drvdata->wm831x = wm831x;
drvdata->reg = res->start;
if (wm831x->dev->platform_data)
chip_pdata = wm831x->dev->platform_data;
else
chip_pdata = NULL;
memset(&pdata, 0, sizeof(pdata));
if (chip_pdata && chip_pdata->status[id])
memcpy(&pdata, chip_pdata->status[id], sizeof(pdata));
else
pdata.name = dev_name(&pdev->dev);
mutex_init(&drvdata->mutex);
INIT_WORK(&drvdata->work, wm831x_status_work);
spin_lock_init(&drvdata->value_lock);
/* We cache the configuration register and read startup values
* from it. */
drvdata->reg_val = wm831x_reg_read(wm831x, drvdata->reg);
if (drvdata->reg_val & WM831X_LED_MODE_MASK)
drvdata->brightness = LED_FULL;
else
drvdata->brightness = LED_OFF;
/* Set a default source if configured, otherwise leave the
* current hardware setting.
*/
if (pdata.default_src == WM831X_STATUS_PRESERVE) {
drvdata->src = drvdata->reg_val;
drvdata->src &= WM831X_LED_SRC_MASK;
drvdata->src >>= WM831X_LED_SRC_SHIFT;
} else {
drvdata->src = pdata.default_src - 1;
}
drvdata->cdev.name = pdata.name;
drvdata->cdev.default_trigger = pdata.default_trigger;
drvdata->cdev.brightness_set = wm831x_status_set;
drvdata->cdev.blink_set = wm831x_status_blink_set;
ret = led_classdev_register(wm831x->dev, &drvdata->cdev);
if (ret < 0) {
dev_err(&pdev->dev, "Failed to register LED: %d\n", ret);
goto err_led;
}
ret = device_create_file(drvdata->cdev.dev, &dev_attr_src);
if (ret != 0)
dev_err(&pdev->dev,
"No source control for LED: %d\n", ret);
return 0;
err_led:
led_classdev_unregister(&drvdata->cdev);
kfree(drvdata);
err:
return ret;
}
static int wm831x_status_remove(struct platform_device *pdev)
{
struct wm831x_status *drvdata = platform_get_drvdata(pdev);
device_remove_file(drvdata->cdev.dev, &dev_attr_src);
led_classdev_unregister(&drvdata->cdev);
kfree(drvdata);
return 0;
}
static struct platform_driver wm831x_status_driver = {
.driver = {
.name = "wm831x-status",
.owner = THIS_MODULE,
},
.probe = wm831x_status_probe,
.remove = wm831x_status_remove,
};
static int __devinit wm831x_status_init(void)
{
return platform_driver_register(&wm831x_status_driver);
}
module_init(wm831x_status_init);
static void wm831x_status_exit(void)
{
platform_driver_unregister(&wm831x_status_driver);
}
module_exit(wm831x_status_exit);
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
MODULE_DESCRIPTION("WM831x status LED driver");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-status");
...@@ -44,22 +44,22 @@ static void gpio_trig_work(struct work_struct *work) ...@@ -44,22 +44,22 @@ static void gpio_trig_work(struct work_struct *work)
struct gpio_trig_data, work); struct gpio_trig_data, work);
int tmp; int tmp;
if (!gpio_data->gpio) if (!gpio_data->gpio)
return; return;
tmp = gpio_get_value(gpio_data->gpio); tmp = gpio_get_value(gpio_data->gpio);
if (gpio_data->inverted) if (gpio_data->inverted)
tmp = !tmp; tmp = !tmp;
if (tmp) { if (tmp) {
if (gpio_data->desired_brightness) if (gpio_data->desired_brightness)
led_set_brightness(gpio_data->led, led_set_brightness(gpio_data->led,
gpio_data->desired_brightness); gpio_data->desired_brightness);
else else
led_set_brightness(gpio_data->led, LED_FULL); led_set_brightness(gpio_data->led, LED_FULL);
} else { } else {
led_set_brightness(gpio_data->led, LED_OFF); led_set_brightness(gpio_data->led, LED_OFF);
} }
} }
static ssize_t gpio_trig_brightness_show(struct device *dev, static ssize_t gpio_trig_brightness_show(struct device *dev,
......
...@@ -72,7 +72,7 @@ static void pmu_led_set(struct led_classdev *led_cdev, ...@@ -72,7 +72,7 @@ static void pmu_led_set(struct led_classdev *led_cdev,
} }
static struct led_classdev pmu_led = { static struct led_classdev pmu_led = {
.name = "pmu-front-led", .name = "pmu-led::front",
#ifdef CONFIG_ADB_PMU_LED_IDE #ifdef CONFIG_ADB_PMU_LED_IDE
.default_trigger = "ide-disk", .default_trigger = "ide-disk",
#endif #endif
......
/*
* include/linux/mfd/wm831x/status.h -- Status LEDs for WM831x
*
* Copyright 2009 Wolfson Microelectronics PLC.
*
* Author: Mark Brown <broonie@opensource.wolfsonmicro.com>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
*
*/
#ifndef __MFD_WM831X_STATUS_H__
#define __MFD_WM831X_STATUS_H__
#define WM831X_LED_SRC_MASK 0xC000 /* LED_SRC - [15:14] */
#define WM831X_LED_SRC_SHIFT 14 /* LED_SRC - [15:14] */
#define WM831X_LED_SRC_WIDTH 2 /* LED_SRC - [15:14] */
#define WM831X_LED_MODE_MASK 0x0300 /* LED_MODE - [9:8] */
#define WM831X_LED_MODE_SHIFT 8 /* LED_MODE - [9:8] */
#define WM831X_LED_MODE_WIDTH 2 /* LED_MODE - [9:8] */
#define WM831X_LED_SEQ_LEN_MASK 0x0030 /* LED_SEQ_LEN - [5:4] */
#define WM831X_LED_SEQ_LEN_SHIFT 4 /* LED_SEQ_LEN - [5:4] */
#define WM831X_LED_SEQ_LEN_WIDTH 2 /* LED_SEQ_LEN - [5:4] */
#define WM831X_LED_DUR_MASK 0x000C /* LED_DUR - [3:2] */
#define WM831X_LED_DUR_SHIFT 2 /* LED_DUR - [3:2] */
#define WM831X_LED_DUR_WIDTH 2 /* LED_DUR - [3:2] */
#define WM831X_LED_DUTY_CYC_MASK 0x0003 /* LED_DUTY_CYC - [1:0] */
#define WM831X_LED_DUTY_CYC_SHIFT 0 /* LED_DUTY_CYC - [1:0] */
#define WM831X_LED_DUTY_CYC_WIDTH 2 /* LED_DUTY_CYC - [1:0] */
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment