Commit ccf77cc4 authored by David Brownell's avatar David Brownell Committed by Greg Kroah-Hartman

[PATCH] SPI: devices can require LSB-first encodings

Add spi_device hook for LSB-first word encoding, and update all the
(in-tree) controller drivers to reject such devices.  Eventually,
some controller drivers will be updated to support lsb-first encodings
on the wire; no current drivers need this.
Signed-off-by: default avatarDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent ff9f4771
......@@ -187,13 +187,22 @@ int spi_bitbang_setup(struct spi_device *spi)
if (!spi->max_speed_hz)
return -EINVAL;
bitbang = spi_master_get_devdata(spi->master);
/* REVISIT: some systems will want to support devices using lsb-first
* bit encodings on the wire. In pure software that would be trivial,
* just bitbang_txrx_le_cphaX() routines shifting the other way, and
* some hardware controllers also have this support.
*/
if ((spi->mode & SPI_LSB_FIRST) != 0)
return -EINVAL;
if (!cs) {
cs = kzalloc(sizeof *cs, SLAB_KERNEL);
if (!cs)
return -ENOMEM;
spi->controller_state = cs;
}
bitbang = spi_master_get_devdata(spi->master);
if (!spi->bits_per_word)
spi->bits_per_word = 8;
......
......@@ -35,10 +35,13 @@ extern struct bus_type spi_bus_type;
* @chip-select: Chipselect, distinguishing chips handled by "master".
* @mode: The spi mode defines how data is clocked out and in.
* This may be changed by the device's driver.
* The "active low" default for chipselect mode can be overridden,
* as can the "MSB first" default for each word in a transfer.
* @bits_per_word: Data transfers involve one or more words; word sizes
* like eight or 12 bits are common. In-memory wordsizes are
* powers of two bytes (e.g. 20 bit samples use 32 bits).
* This may be changed by the device's driver.
* This may be changed by the device's driver, or left at the
* default (0) indicating protocol words are eight bit bytes.
* The spi_transfer.bits_per_word can override this for each transfer.
* @irq: Negative, or the number passed to request_irq() to receive
* interrupts from this device.
......@@ -67,6 +70,7 @@ struct spi_device {
#define SPI_MODE_2 (SPI_CPOL|0)
#define SPI_MODE_3 (SPI_CPOL|SPI_CPHA)
#define SPI_CS_HIGH 0x04 /* chipselect active high? */
#define SPI_LSB_FIRST 0x08 /* per-word bits-on-wire */
u8 bits_per_word;
int irq;
void *controller_state;
......@@ -75,7 +79,6 @@ struct spi_device {
// likely need more hooks for more protocol options affecting how
// the controller talks to each chip, like:
// - bit order (default is wordwise msb-first)
// - memory packing (12 bit samples into low bits, others zeroed)
// - priority
// - drop chipselect after each word
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment