mac80211: Add RRM support to assoc request

In case of a RRM-supporting connection, in the association request
frame: set the RRM capability flag, and add the required IEs.
Signed-off-by: Assaf Krauss <assaf.krauss@intel.com>
Signed-off-by: Emmanuel Grumbach <emmanuel.grumbach@intel.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>

net/mac80211/ieee80211_i.h

@@ -355,6 +355,7 @@ enum ieee80211_sta_flags {
 	IEEE80211_STA_DISABLE_80P80MHZ	= BIT(12),
 	IEEE80211_STA_DISABLE_160MHZ	= BIT(13),
 	IEEE80211_STA_DISABLE_WMM	= BIT(14),
+	IEEE80211_STA_ENABLE_RRM	= BIT(15),
 };
 
 struct ieee80211_mgd_auth_data {

net/mac80211/mlme.c

@@ -673,6 +673,9 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 	    (local->hw.flags & IEEE80211_HW_SPECTRUM_MGMT))
 		capab |= WLAN_CAPABILITY_SPECTRUM_MGMT;
 
+	if (ifmgd->flags & IEEE80211_STA_ENABLE_RRM)
+		capab |= WLAN_CAPABILITY_RADIO_MEASURE;
+
 	mgmt = (struct ieee80211_mgmt *) skb_put(skb, 24);
 	memset(mgmt, 0, 24);
 	memcpy(mgmt->da, assoc_data->bss->bssid, ETH_ALEN);
@@ -738,16 +741,17 @@ static void ieee80211_send_assoc(struct ieee80211_sub_if_data *sdata)
 		}
 	}
 
-	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
-		/* 1. power capabilities */
+	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT ||
+	    capab & WLAN_CAPABILITY_RADIO_MEASURE) {
 		pos = skb_put(skb, 4);
 		*pos++ = WLAN_EID_PWR_CAPABILITY;
 		*pos++ = 2;
 		*pos++ = 0; /* min tx power */
 		 /* max tx power */
 		*pos++ = ieee80211_chandef_max_power(&chanctx_conf->def);
+	}
 
-		/* 2. supported channels */
+	if (capab & WLAN_CAPABILITY_SPECTRUM_MGMT) {
 		/* TODO: get this in reg domain format */
 		pos = skb_put(skb, 2 * sband->n_channels + 2);
 		*pos++ = WLAN_EID_SUPPORTED_CHANNELS;
@@ -4410,6 +4414,11 @@ int ieee80211_mgd_assoc(struct ieee80211_sub_if_data *sdata,
 		ifmgd->flags &= ~IEEE80211_STA_MFP_ENABLED;
 	}
 
+	if (req->flags & ASSOC_REQ_USE_RRM)
+		ifmgd->flags |= IEEE80211_STA_ENABLE_RRM;
+	else
+		ifmgd->flags &= ~IEEE80211_STA_ENABLE_RRM;
+
 	if (req->crypto.control_port)
 		ifmgd->flags |= IEEE80211_STA_CONTROL_PORT;
 	else