e1000e: cleanup USLEEP_RANGE checkpatch checks

Resolve strict checkpatch USLEEP_RANGE checks by converting delays and
sleeps as described in ./Documentation/timers/timers-howto.txt.  Three
other violations of the text have also been fixed.

CHECK:USLEEP_RANGE: usleep_range is preferred over udelay; see
Documentation/timers/timers-howto.txt
Signed-off-by: Bruce Allan <bruce.w.allan@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

drivers/net/ethernet/intel/e1000e/80003es2lan.c

@@ -395,7 +395,7 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 		 * before the device has completed the "Page Select" MDI
 		 * transaction.  So we wait 200us after each MDI command...
 		 */
-		udelay(200);
+		usleep_range(200, 400);
 
 		/* ...and verify the command was successful. */
 		ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
@@ -405,13 +405,13 @@ static s32 e1000_read_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 			return -E1000_ERR_PHY;
 		}
 
-		udelay(200);
+		usleep_range(200, 400);
 
 		ret_val = e1000e_read_phy_reg_mdic(hw,
 						   MAX_PHY_REG_ADDRESS & offset,
 						   data);
 
-		udelay(200);
+		usleep_range(200, 400);
 	} else {
 		ret_val = e1000e_read_phy_reg_mdic(hw,
 						   MAX_PHY_REG_ADDRESS & offset,
@@ -464,7 +464,7 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 		 * before the device has completed the "Page Select" MDI
 		 * transaction.  So we wait 200us after each MDI command...
 		 */
-		udelay(200);
+		usleep_range(200, 400);
 
 		/* ...and verify the command was successful. */
 		ret_val = e1000e_read_phy_reg_mdic(hw, page_select, &temp);
@@ -474,13 +474,13 @@ static s32 e1000_write_phy_reg_gg82563_80003es2lan(struct e1000_hw *hw,
 			return -E1000_ERR_PHY;
 		}
 
-		udelay(200);
+		usleep_range(200, 400);
 
 		ret_val = e1000e_write_phy_reg_mdic(hw,
 						    MAX_PHY_REG_ADDRESS &
 						    offset, data);
 
-		udelay(200);
+		usleep_range(200, 400);
 	} else {
 		ret_val = e1000e_write_phy_reg_mdic(hw,
 						    MAX_PHY_REG_ADDRESS &

drivers/net/ethernet/intel/e1000e/82571.c

@@ -437,7 +437,7 @@ static s32 e1000_get_phy_id_82571(struct e1000_hw *hw)
 			return ret_val;
 
 		phy->id = (u32)(phy_id << 16);
-		udelay(20);
+		usleep_range(20, 40);
 		ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
 		if (ret_val)
 			return ret_val;
@@ -482,7 +482,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 		if (!(swsm & E1000_SWSM_SMBI))
 			break;
 
-		udelay(50);
+		usleep_range(50, 100);
 		i++;
 	}
 
@@ -499,7 +499,7 @@ static s32 e1000_get_hw_semaphore_82571(struct e1000_hw *hw)
 		if (er32(SWSM) & E1000_SWSM_SWESMBI)
 			break;
 
-		udelay(50);
+		usleep_range(50, 100);
 	}
 
 	if (i == fw_timeout) {
@@ -1022,7 +1022,7 @@ static s32 e1000_reset_hw_82571(struct e1000_hw *hw)
 	}
 
 	if (hw->nvm.type == e1000_nvm_flash_hw) {
-		udelay(10);
+		usleep_range(10, 20);
 		ctrl_ext = er32(CTRL_EXT);
 		ctrl_ext |= E1000_CTRL_EXT_EE_RST;
 		ew32(CTRL_EXT, ctrl_ext);
@@ -1529,7 +1529,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 	status = er32(STATUS);
 	er32(RXCW);
 	/* SYNCH bit and IV bit are sticky */
-	udelay(10);
+	usleep_range(10, 20);
 	rxcw = er32(RXCW);
 
 	if ((rxcw & E1000_RXCW_SYNCH) && !(rxcw & E1000_RXCW_IV)) {
@@ -1632,7 +1632,7 @@ static s32 e1000_check_for_serdes_link_82571(struct e1000_hw *hw)
 			 * the IV bit and restart Autoneg
 			 */
 			for (i = 0; i < AN_RETRY_COUNT; i++) {
-				udelay(10);
+				usleep_range(10, 20);
 				rxcw = er32(RXCW);
 				if ((rxcw & E1000_RXCW_SYNCH) &&
 				    (rxcw & E1000_RXCW_C))

drivers/net/ethernet/intel/e1000e/e1000.h

@@ -597,7 +597,7 @@ static inline s32 __ew32_prepare(struct e1000_hw *hw)
 	s32 i = E1000_ICH_FWSM_PCIM2PCI_COUNT;
 
 	while ((er32(FWSM) & E1000_ICH_FWSM_PCIM2PCI) && --i)
-		udelay(50);
+		usleep_range(50, 100);
 
 	return i;
 }

drivers/net/ethernet/intel/e1000e/ethtool.c

@@ -1297,7 +1297,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 		ew32(CTRL, ctrl_reg);
 		e1e_flush();
-		udelay(500);
+		usleep_range(500, 1000);
 
 		return 0;
 	}
@@ -1323,7 +1323,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 		e1e_wphy(hw, PHY_REG(2, 21), phy_reg);
 		/* Assert SW reset for above settings to take effect */
 		hw->phy.ops.commit(hw);
-		mdelay(1);
+		usleep_range(1000, 2000);
 		/* Force Full Duplex */
 		e1e_rphy(hw, PHY_REG(769, 16), &phy_reg);
 		e1e_wphy(hw, PHY_REG(769, 16), phy_reg | 0x000C);
@@ -1364,7 +1364,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 
 	/* force 1000, set loopback */
 	e1e_wphy(hw, MII_BMCR, 0x4140);
-	mdelay(250);
+	msleep(250);
 
 	/* Now set up the MAC to the same speed/duplex as the PHY. */
 	ctrl_reg = er32(CTRL);
@@ -1396,7 +1396,7 @@ static int e1000_integrated_phy_loopback(struct e1000_adapter *adapter)
 	if (hw->phy.type == e1000_phy_m88)
 		e1000_phy_disable_receiver(adapter);
 
-	udelay(500);
+	usleep_range(500, 1000);
 
 	return 0;
 }
@@ -1704,7 +1704,7 @@ static int e1000_link_test(struct e1000_adapter *adapter, u64 *data)
 			/* On some Phy/switch combinations, link establishment
 			 * can take a few seconds more than expected.
 			 */
-			msleep(5000);
+			msleep_interruptible(5000);
 
 		if (!(er32(STATUS) & E1000_STATUS_LU))
 			*data = 1;

drivers/net/ethernet/intel/e1000e/ich8lan.c

@@ -312,7 +312,7 @@ static s32 e1000_init_phy_workarounds_pchlan(struct e1000_hw *hw)
 		mac_reg &= ~E1000_CTRL_LANPHYPC_VALUE;
 		ew32(CTRL, mac_reg);
 		e1e_flush();
-		udelay(10);
+		usleep_range(10, 20);
 		mac_reg &= ~E1000_CTRL_LANPHYPC_OVERRIDE;
 		ew32(CTRL, mac_reg);
 		e1e_flush();
@@ -1517,7 +1517,7 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 	if (ret_val)
 		return ret_val;
 
-	udelay(20);
+	usleep_range(20, 40);
 	ctrl_ext = er32(CTRL_EXT);
 	ctrl_reg = er32(CTRL);
 
@@ -1527,11 +1527,11 @@ s32 e1000_configure_k1_ich8lan(struct e1000_hw *hw, bool k1_enable)
 
 	ew32(CTRL_EXT, ctrl_ext | E1000_CTRL_EXT_SPD_BYPS);
 	e1e_flush();
-	udelay(20);
+	usleep_range(20, 40);
 	ew32(CTRL, ctrl_reg);
 	ew32(CTRL_EXT, ctrl_ext);
 	e1e_flush();
-	udelay(20);
+	usleep_range(20, 40);
 
 	return 0;
 }
@@ -2037,7 +2037,7 @@ static void e1000_lan_init_done_ich8lan(struct e1000_hw *hw)
 	do {
 		data = er32(STATUS);
 		data &= E1000_STATUS_LAN_INIT_DONE;
-		udelay(100);
+		usleep_range(100, 200);
 	} while ((!data) && --loop);
 
 	/* If basic configuration is incomplete before the above loop
@@ -2801,7 +2801,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		/* Convert offset to bytes. */
 		act_offset = (i + new_bank_offset) << 1;
 
-		udelay(100);
+		usleep_range(100, 200);
 		/* Write the bytes to the new bank. */
 		ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
 							       act_offset,
@@ -2809,7 +2809,7 @@ static s32 e1000_update_nvm_checksum_ich8lan(struct e1000_hw *hw)
 		if (ret_val)
 			break;
 
-		udelay(100);
+		usleep_range(100, 200);
 		ret_val = e1000_retry_write_flash_byte_ich8lan(hw,
 							       act_offset + 1,
 							       (u8)(data >> 8));
@@ -3077,7 +3077,7 @@ static s32 e1000_retry_write_flash_byte_ich8lan(struct e1000_hw *hw,
 
 	for (program_retries = 0; program_retries < 100; program_retries++) {
 		e_dbg("Retrying Byte %2.2X at offset %u\n", byte, offset);
-		udelay(100);
+		usleep_range(100, 200);
 		ret_val = e1000_write_flash_byte_ich8lan(hw, offset, byte);
 		if (!ret_val)
 			break;

drivers/net/ethernet/intel/e1000e/mac.c

@@ -596,7 +596,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		 * serdes media type.
 		 */
 		/* SYNCH bit and IV bit are sticky. */
-		udelay(10);
+		usleep_range(10, 20);
 		rxcw = er32(RXCW);
 		if (rxcw & E1000_RXCW_SYNCH) {
 			if (!(rxcw & E1000_RXCW_IV)) {
@@ -613,7 +613,7 @@ s32 e1000e_check_for_serdes_link(struct e1000_hw *hw)
 		status = er32(STATUS);
 		if (status & E1000_STATUS_LU) {
 			/* SYNCH bit and IV bit are sticky, so reread rxcw. */
-			udelay(10);
+			usleep_range(10, 20);
 			rxcw = er32(RXCW);
 			if (rxcw & E1000_RXCW_SYNCH) {
 				if (!(rxcw & E1000_RXCW_IV)) {
@@ -1382,7 +1382,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 		if (!(swsm & E1000_SWSM_SMBI))
 			break;
 
-		udelay(50);
+		usleep_range(50, 100);
 		i++;
 	}
 
@@ -1400,7 +1400,7 @@ s32 e1000e_get_hw_semaphore(struct e1000_hw *hw)
 		if (er32(SWSM) & E1000_SWSM_SWESMBI)
 			break;
 
-		udelay(50);
+		usleep_range(50, 100);
 	}
 
 	if (i == timeout) {
@@ -1712,7 +1712,7 @@ s32 e1000e_disable_pcie_master(struct e1000_hw *hw)
 	while (timeout) {
 		if (!(er32(STATUS) & E1000_STATUS_GIO_MASTER_ENABLE))
 			break;
-		udelay(100);
+		usleep_range(100, 200);
 		timeout--;
 	}
 

drivers/net/ethernet/intel/e1000e/nvm.c

@@ -630,7 +630,7 @@ void e1000e_reload_nvm_generic(struct e1000_hw *hw)
 {
 	u32 ctrl_ext;
 
-	udelay(10);
+	usleep_range(10, 20);
 	ctrl_ext = er32(CTRL_EXT);
 	ctrl_ext |= E1000_CTRL_EXT_EE_RST;
 	ew32(CTRL_EXT, ctrl_ext);

drivers/net/ethernet/intel/e1000e/phy.c

@@ -97,7 +97,7 @@ s32 e1000e_get_phy_id(struct e1000_hw *hw)
 			return ret_val;
 
 		phy->id = (u32)(phy_id << 16);
-		udelay(20);
+		usleep_range(20, 40);
 		ret_val = e1e_rphy(hw, MII_PHYSID2, &phy_id);
 		if (ret_val)
 			return ret_val;
@@ -165,7 +165,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	 * the lower time out
 	 */
 	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		udelay(50);
+		usleep_range(50, 100);
 		mdic = er32(MDIC);
 		if (mdic & E1000_MDIC_READY)
 			break;
@@ -184,7 +184,7 @@ s32 e1000e_read_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 *data)
 	 * reading duplicate data in the next MDIC transaction.
 	 */
 	if (hw->mac.type == e1000_pch2lan)
-		udelay(100);
+		usleep_range(100, 200);
 
 	return 0;
 }
@@ -223,7 +223,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	 * the lower time out
 	 */
 	for (i = 0; i < (E1000_GEN_POLL_TIMEOUT * 3); i++) {
-		udelay(50);
+		usleep_range(50, 100);
 		mdic = er32(MDIC);
 		if (mdic & E1000_MDIC_READY)
 			break;
@@ -241,7 +241,7 @@ s32 e1000e_write_phy_reg_mdic(struct e1000_hw *hw, u32 offset, u16 data)
 	 * reading duplicate data in the next MDIC transaction.
 	 */
 	if (hw->mac.type == e1000_pch2lan)
-		udelay(100);
+		usleep_range(100, 200);
 
 	return 0;
 }
@@ -2120,7 +2120,7 @@ s32 e1000e_phy_hw_reset_generic(struct e1000_hw *hw)
 	ew32(CTRL, ctrl);
 	e1e_flush();
 
-	udelay(150);
+	usleep_range(150, 300);
 
 	phy->ops.release(hw);