Commit ce8b2fd0 authored by Sebastian Sanchez's avatar Sebastian Sanchez Committed by Doug Ledford

IB/hfi1: Update pkey table properly after link down or FM start

When FM is disabled, and the HFI port on the switch is
changed from MgmtAllowed=YES to MgmtAllowed=NO and the
link is bounced, FULL_MGMT_P_KEY doesn't get cleared
from the pkey table. This also occurs when the QSFP
cable is moved from a switch port with MgmtAllowed=YES
to a MgmtAllowed=NO port. Clear pkey entry properly.

Also, when the driver is loaded and the switch port is
set to MgmtAllowed=NO, FULL_MGMT_P_KEY shouldn't be added
to pkey table after FM is started. Only set FULL_MGMT_P_KEY
in the pkey table if switch port is configured to
MgmtAllowed=YES.
Reviewed-by: default avatarDean Luick <dean.luick@intel.com>
Signed-off-by: default avatarSebastian Sanchez <sebastian.sanchez@intel.com>
Signed-off-by: default avatarDoug Ledford <dledford@redhat.com>
parent 8b103e9c
......@@ -1037,6 +1037,7 @@ static void dc_shutdown(struct hfi1_devdata *);
static void dc_start(struct hfi1_devdata *);
static int qos_rmt_entries(struct hfi1_devdata *dd, unsigned int *mp,
unsigned int *np);
static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd);
/*
* Error interrupt table entry. This is used as input to the interrupt
......@@ -6961,6 +6962,8 @@ void handle_link_down(struct work_struct *work)
}
reset_neighbor_info(ppd);
if (ppd->mgmt_allowed)
remove_full_mgmt_pkey(ppd);
/* disable the port */
clear_rcvctrl(ppd->dd, RCV_CTRL_RCV_PORT_ENABLE_SMASK);
......@@ -7069,6 +7072,12 @@ static void add_full_mgmt_pkey(struct hfi1_pportdata *ppd)
(void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0);
}
static void remove_full_mgmt_pkey(struct hfi1_pportdata *ppd)
{
ppd->pkeys[2] = 0;
(void)hfi1_set_ib_cfg(ppd, HFI1_IB_CFG_PKEYS, 0);
}
/*
* Convert the given link width to the OPA link width bitmask.
*/
......
......@@ -1402,6 +1402,12 @@ static int set_pkeys(struct hfi1_devdata *dd, u8 port, u16 *pkeys)
if (key == okey)
continue;
/*
* Don't update pkeys[2], if an HFI port without MgmtAllowed
* by neighbor is a switch.
*/
if (i == 2 && !ppd->mgmt_allowed && ppd->neighbor_type == 1)
continue;
/*
* The SM gives us the complete PKey table. We have
* to ensure that we put the PKeys in the matching
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment