Commit cec9d101 authored by Justin Swartz's avatar Justin Swartz Committed by Heiko Stuebner

clk: rockchip: fix incorrect configuration of rk3228 aclk_gpu* clocks

The following changes prevent the unrecoverable freezes and rcu_sched
stall warnings experienced in each of my attempts to take advantage of
lima.

Replace the COMPOSITE_NOGATE definition of aclk_gpu_pre with a
COMPOSITE that retains the selection of HDMIPHY as the PLL source, but
instead makes uses of the aclk_gpu PLL source gate and parent names
defined by mux_pll_src_4plls_p rather than mux_aclk_gpu_pre_p.

Remove the now unused mux_aclk_gpu_pre_p and the four named but also
unused definitions (cpll_gpu, gpll_gpu, hdmiphy_gpu and usb480m_gpu)
of the aclk_gpu PLL source gate.

Use the correct gate offset for aclk_gpu and aclk_gpu_noc.

Fixes: 307a2e9a ("clk: rockchip: add clock controller for rk3228")
Cc: stable@vger.kernel.org
Signed-off-by: default avatarJustin Swartz <justin.swartz@risingedge.co.za>
[double-checked against SoC manual and added fixes tag]
Link: https://lore.kernel.org/r/20200114162503.7548-1-justin.swartz@risingedge.co.zaSigned-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 8f3d9f35
......@@ -156,8 +156,6 @@ PNAME(mux_i2s_out_p) = { "i2s1_pre", "xin12m" };
PNAME(mux_i2s2_p) = { "i2s2_src", "i2s2_frac", "xin12m" };
PNAME(mux_sclk_spdif_p) = { "sclk_spdif_src", "spdif_frac", "xin12m" };
PNAME(mux_aclk_gpu_pre_p) = { "cpll_gpu", "gpll_gpu", "hdmiphy_gpu", "usb480m_gpu" };
PNAME(mux_uart0_p) = { "uart0_src", "uart0_frac", "xin24m" };
PNAME(mux_uart1_p) = { "uart1_src", "uart1_frac", "xin24m" };
PNAME(mux_uart2_p) = { "uart2_src", "uart2_frac", "xin24m" };
......@@ -468,16 +466,9 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
RK2928_CLKSEL_CON(24), 6, 10, DFLAGS,
RK2928_CLKGATE_CON(2), 8, GFLAGS),
GATE(0, "cpll_gpu", "cpll", 0,
RK2928_CLKGATE_CON(3), 13, GFLAGS),
GATE(0, "gpll_gpu", "gpll", 0,
RK2928_CLKGATE_CON(3), 13, GFLAGS),
GATE(0, "hdmiphy_gpu", "hdmiphy", 0,
RK2928_CLKGATE_CON(3), 13, GFLAGS),
GATE(0, "usb480m_gpu", "usb480m", 0,
COMPOSITE(0, "aclk_gpu_pre", mux_pll_src_4plls_p, 0,
RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS,
RK2928_CLKGATE_CON(3), 13, GFLAGS),
COMPOSITE_NOGATE(0, "aclk_gpu_pre", mux_aclk_gpu_pre_p, 0,
RK2928_CLKSEL_CON(34), 5, 2, MFLAGS, 0, 5, DFLAGS),
COMPOSITE(SCLK_SPI0, "sclk_spi0", mux_pll_src_2plls_p, 0,
RK2928_CLKSEL_CON(25), 8, 1, MFLAGS, 0, 7, DFLAGS,
......@@ -582,8 +573,8 @@ static struct rockchip_clk_branch rk3228_clk_branches[] __initdata = {
GATE(0, "pclk_peri_noc", "pclk_peri", CLK_IGNORE_UNUSED, RK2928_CLKGATE_CON(12), 2, GFLAGS),
/* PD_GPU */
GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 14, GFLAGS),
GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(13), 15, GFLAGS),
GATE(ACLK_GPU, "aclk_gpu", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 14, GFLAGS),
GATE(0, "aclk_gpu_noc", "aclk_gpu_pre", 0, RK2928_CLKGATE_CON(7), 15, GFLAGS),
/* PD_BUS */
GATE(0, "sclk_initmem_mbist", "aclk_cpu", 0, RK2928_CLKGATE_CON(8), 1, GFLAGS),
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment