Merge tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd

Pull MFD updates from Lee Jones:
 "New Drivers:
   - Add STMPE ADC Input driver
   - Add STMicroelectronics STPMIC1 Parent driver
   - Add STMicroelectronics STPMIC1 OnKey Misc driver
   - Add STMicroelectronics STPMIC1 Watchdog driver
   - Add Cirrus Logic Lochnagar Parent driver
   - Add TQ-Systems TQMX86 Parent driver

  New Device Support:
   - Add support for ADC to STMPE

  New (or moved) Functionality:
   - Move Lightbar functionality to its own driver; cros_ec_lightbar
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move VBC functionality to its own driver; cros_ec_vbc
   - Move DebugFS functionality to its own driver; cros_ec_debugfs
   - Move SYSFS functionality to its own driver; cros_ec_sysfs
   - Add support for input voltage options; tps65218

  Fixes:
   - Use devm_* managed resources; cros_ec
   - Device Tree documentation; stmpe, aspeed-lpc, lochnagar
   - Trivial Clean-ups; stmpe
   - Rip out broken modular code; aat2870-core, adp5520, as3711,
         db8500-prcmu, htc-i2cpld, max8925-core, rc5t583, sta2x11-mfd,
	 syscon, tps65090, tps65910, tps68470 tps80031, wm831x-spi,
	 wm831x-i2c, wm831x-core, wm8350-i2c, wm8350-core, wm8400-core
   - Kconfig fixups; INTEL_SOC_PMIC
   - Improve error path; sm501, sec-core
   - Use struct_size() helper; sm501
   - Constify; at91-usart
   - Use pointers instead of copying data; at91-usart
   - Deliver proper return value; cros_ec_dev
   - Trivial formatting/whitespace; sec-core"

* tag 'mfd-next-5.1' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/mfd: (53 commits)
  mfd: mxs-lradc: Mark expected switch fall-through
  mfd: sec-core: Cleanup formatting to a consistent style
  mfd: tqmx86: IO controller with I2C, Wachdog and GPIO
  mfd: intel-lpss: Move linux/pm.h to the local header
  mfd: cros_ec_dev: Return number of bytes read with CROS_EC_DEV_IOCRDMEM
  mfd: tps68470: Drop unused MODULE_DEVICE_TABLE
  mfd: at91-usart: No need to copy mfd_cell in probe
  mfd: at91-usart: Constify at91_usart_spi_subdev and at91_usart_serial_subdev
  mfd: lochnagar: Add support for the Cirrus Logic Lochnagar
  mfd: lochnagar: Add initial binding documentation
  dt-bindings: mfd: aspeed-lpc: Make parameter optional
  mfd: sec-core: Return gracefully instead of BUG() if device cannot match
  mfd: sm501: Use struct_size() in devm_kzalloc()
  mfd: sm501: Fix potential NULL pointer dereference
  mfd: Kconfig: Fix I2C_DESIGNWARE_PLATFORM dependencies
  mfd: tps65218.c: Add input voltage options
  mfd: wm8400-core: Make it explicitly non-modular
  mfd: wm8350-core: Drop unused module infrastructure from non-modular code
  mfd: wm8350-i2c: Make it explicitly non-modular
  mfd: wm831x-core: Drop unused module infrastructure from non-modular code
  ...

Documentation/ABI/testing/sysfs-class-chromeos

+What:		/sys/class/chromeos/<ec-device-name>/flashinfo
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		Show the EC flash information.
+
+What:		/sys/class/chromeos/<ec-device-name>/kb_wake_angle
+Date:		March 2018
+KernelVersion:	4.17
+Description:
+		Control the keyboard wake lid angle. Values are between
+		0 and 360. This file will also show the keyboard wake lid
+		angle by querying the hardware.
+
+What:		/sys/class/chromeos/<ec-device-name>/reboot
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		Tell the EC to reboot in various ways. Options are:
+		"cancel": Cancel a pending reboot.
+		"ro": Jump to RO without rebooting.
+		"rw": Jump to RW without rebooting.
+		"cold": Cold reboot.
+		"disable-jump": Disable jump until next reboot.
+		"hibernate": Hibernate the EC.
+		"at-shutdown": Reboot after an AP shutdown.
+
+What:		/sys/class/chromeos/<ec-device-name>/version
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		Show the information about the EC software and hardware.

Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-lightbar

+What:		/sys/class/chromeos/<ec-device-name>/lightbar/brightness
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		Writing to this file adjusts the overall brightness of
+		the lightbar, separate from any color intensity. The
+		valid range is 0 (off) to 255 (maximum brightness).
+
+What:		/sys/class/chromeos/<ec-device-name>/lightbar/interval_msec
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		The lightbar is controlled by an embedded controller (EC),
+		which also manages the keyboard, battery charging, fans,
+		and other system hardware. To prevent unprivileged users
+		from interfering with the other EC functions, the rate at
+		which the lightbar control files can be read or written is
+		limited.
+
+		Reading this file will return the number of milliseconds
+		that must elapse between accessing any of the lightbar
+		functions through this interface. Going faster will simply
+		block until the necessary interval has lapsed. The interval
+		applies uniformly to all accesses of any kind by any user.
+
+What:		/sys/class/chromeos/<ec-device-name>/lightbar/led_rgb
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		This allows you to control each LED segment. If the
+		lightbar is already running one of the automatic
+		sequences, you probably won’t see anything change because
+		your color setting will be almost immediately replaced.
+		To get useful results, you should stop the lightbar
+		sequence first.
+
+		The values written to this file are sets of four integers,
+		indicating LED, RED, GREEN, BLUE. The LED number is 0 to 3
+		to select a single segment, or 4 to set all four segments
+		to the same value at once. The RED, GREEN, and BLUE
+		numbers should be in the range 0 (off) to 255 (maximum).
+		You can update more than one segment at a time by writing
+		more than one set of four integers.
+
+What:		/sys/class/chromeos/<ec-device-name>/lightbar/program
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		This allows you to upload and run custom lightbar sequences.
+
+What:		/sys/class/chromeos/<ec-device-name>/lightbar/sequence
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		The Pixel lightbar has a number of built-in sequences
+		that it displays under various conditions, such as at
+		power on, shut down, or while running. Reading from this
+		file displays the current sequence that the lightbar is
+		displaying. Writing to this file allows you to change the
+		sequence.
+
+What:		/sys/class/chromeos/<ec-device-name>/lightbar/userspace_control
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		This allows you to take the control of the lightbar. This
+		prevents the kernel from going through its normal
+		sequences.
+
+What:		/sys/class/chromeos/<ec-device-name>/lightbar/version
+Date:		August 2015
+KernelVersion:	4.2
+Description:
+		Show the information about the lightbar version.

Documentation/ABI/testing/sysfs-class-chromeos-driver-cros-ec-vbc

+What:		/sys/class/chromeos/<ec-device-name>/vbc/vboot_context
+Date:		October 2015
+KernelVersion:	4.4
+Description:
+		Read/write the verified boot context data included on a
+		small nvram space on some EC implementations.

Documentation/devicetree/bindings/iio/adc/stmpe-adc.txt

+STMPE ADC driver
+----------------
+
+Required properties:
+ - compatible: "st,stmpe-adc"
+
+Optional properties:
+Note that the ADC is shared with the STMPE touchscreen. ADC related settings
+have to be done in the mfd.
+- st,norequest-mask: bitmask specifying which ADC channels should _not_ be
+  requestable due to different usage (e.g. touch)
+
+Node name must be stmpe_adc and should be child node of stmpe node to
+which it belongs.
+
+Example:
+
+	stmpe_adc {
+		compatible = "st,stmpe-adc";
+		st,norequest-mask = <0x0F>; /* dont use ADC CH3-0 */
+	};

Documentation/devicetree/bindings/input/st,stpmic1-onkey.txt

+STMicroelectronics STPMIC1 Onkey
+
+Required properties:
+
+- compatible = "st,stpmic1-onkey";
+- interrupts: interrupt line to use
+- interrupt-names = "onkey-falling", "onkey-rising"
+	onkey-falling: happens when onkey is pressed; IT_PONKEY_F of pmic
+	onkey-rising: happens when onkey is released; IT_PONKEY_R of pmic
+
+Optional properties:
+
+- st,onkey-clear-cc-flag: onkey is able power on after an
+  over-current shutdown event.
+- st,onkey-pu-inactive: onkey pull up is not active
+- power-off-time-sec: Duration in seconds which the key should be kept
+        pressed for device to power off automatically (from 1 to 16 seconds).
+        see See Documentation/devicetree/bindings/input/keys.txt
+
+Example:
+
+onkey {
+	compatible = "st,stpmic1-onkey";
+	interrupt-parent = <&pmic>;
+	interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+	interrupt-names = "onkey-falling", "onkey-rising";
+	power-off-time-sec = <10>;
+};

Documentation/devicetree/bindings/input/touchscreen/stmpe.txt

@@ -5,39 +5,105 @@ Required properties:
  - compatible: "st,stmpe-ts"
 
 Optional properties:
-- st,sample-time: ADC converstion time in number of clock.  (0 -> 36 clocks, 1 ->
-  44 clocks, 2 -> 56 clocks, 3 -> 64 clocks, 4 -> 80 clocks, 5 -> 96 clocks, 6
-  -> 144 clocks), recommended is 4.
-- st,mod-12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
-- st,ref-sel: ADC reference source (0 -> internal reference, 1 -> external
-  reference)
-- st,adc-freq: ADC Clock speed (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
-- st,ave-ctrl: Sample average control (0 -> 1 sample, 1 -> 2 samples, 2 -> 4
-  samples, 3 -> 8 samples)
-- st,touch-det-delay: Touch detect interrupt delay (0 -> 10 us, 1 -> 50 us, 2 ->
-  100 us, 3 -> 500 us, 4-> 1 ms, 5 -> 5 ms, 6 -> 10 ms, 7 -> 50 ms) recommended
-  is 3
-- st,settling: Panel driver settling time (0 -> 10 us, 1 -> 100 us, 2 -> 500 us, 3
-  -> 1 ms, 4 -> 5 ms, 5 -> 10 ms, 6 for 50 ms, 7 -> 100 ms) recommended is 2
-- st,fraction-z: Length of the fractional part in z (fraction-z ([0..7]) = Count of
-  the fractional part) recommended is 7
-- st,i-drive: current limit value of the touchscreen drivers (0 -> 20 mA typical 35
-  mA max, 1 -> 50 mA typical 80 mA max)
+- st,ave-ctrl		: Sample average control
+				0 -> 1 sample
+				1 -> 2 samples
+				2 -> 4 samples
+				3 -> 8 samples
+- st,touch-det-delay	: Touch detect interrupt delay (recommended is 3)
+				0 -> 10 us
+				1 -> 50 us
+				2 -> 100 us
+				3 -> 500 us
+				4 -> 1 ms
+				5 -> 5 ms
+				6 -> 10 ms
+				7 -> 50 ms
+- st,settling		: Panel driver settling time (recommended is 2)
+				0 -> 10 us
+				1 -> 100 us
+				2 -> 500 us
+				3 -> 1 ms
+				4 -> 5 ms
+				5 -> 10 ms
+				6 -> 50 ms
+				7 -> 100 ms
+- st,fraction-z		: Length of the fractional part in z (recommended is 7)
+			  (fraction-z ([0..7]) = Count of the fractional part)
+- st,i-drive		: current limit value of the touchscreen drivers
+				0 -> 20 mA (typical 35mA max)
+				1 -> 50 mA (typical 80 mA max)
+
+Optional properties common with MFD (deprecated):
+ - st,sample-time	: ADC conversion time in number of clock.
+				0 -> 36 clocks
+				1 -> 44 clocks
+				2 -> 56 clocks
+				3 -> 64 clocks
+				4 -> 80 clocks (recommended)
+				5 -> 96 clocks
+				6 -> 124 clocks
+ - st,mod-12b		: ADC Bit mode
+				0 -> 10bit ADC
+				1 -> 12bit ADC
+ - st,ref-sel		: ADC reference source
+				0 -> internal
+				1 -> external
+ - st,adc-freq		: ADC Clock speed
+				0 -> 1.625 MHz
+				1 -> 3.25 MHz
+				2 || 3 -> 6.5 MHz
 
 Node name must be stmpe_touchscreen and should be child node of stmpe node to
 which it belongs.
 
+Note that common ADC settings of stmpe_touchscreen (child) will take precedence
+over the settings done in MFD.
+
 Example:
 
+stmpe811@41 {
+	compatible = "st,stmpe811";
+	pinctrl-names = "default";
+	pinctrl-0 = <&pinctrl_touch_int>;
+	#address-cells = <1>;
+	#size-cells = <0>;
+	reg = <0x41>;
+	interrupts = <10 IRQ_TYPE_LEVEL_LOW>;
+	interrupt-parent = <&gpio4>;
+	interrupt-controller;
+	id = <0>;
+	blocks = <0x5>;
+	irq-trigger = <0x1>;
+	/* Common ADC settings */
+	/* 3.25 MHz ADC clock speed */
+	st,adc-freq = <1>;
+	/* 12-bit ADC */
+	st,mod-12b = <1>;
+	/* internal ADC reference */
+	st,ref-sel = <0>;
+	/* ADC converstion time: 80 clocks */
+	st,sample-time = <4>;
+
 	stmpe_touchscreen {
 		compatible = "st,stmpe-ts";
-		st,sample-time = <4>;
-		st,mod-12b = <1>;
-		st,ref-sel = <0>;
-		st,adc-freq = <1>;
-		st,ave-ctrl = <1>;
-		st,touch-det-delay = <2>;
-		st,settling = <2>;
+		reg = <0>;
+		/* 8 sample average control */
+		st,ave-ctrl = <3>;
+		/* 5 ms touch detect interrupt delay */
+		st,touch-det-delay = <5>;
+		/* 1 ms panel driver settling time */
+		st,settling = <3>;
+		/* 7 length fractional part in z */
 		st,fraction-z = <7>;
+		/*
+		 * 50 mA typical 80 mA max touchscreen drivers
+		 * current limit value
+		 */
 		st,i-drive = <1>;
 	};
+	stmpe_adc {
+		compatible = "st,stmpe-adc";
+		st,norequest-mask = <0x0F>;
+	};
+};

Documentation/devicetree/bindings/mfd/aspeed-lpc.txt

@@ -135,6 +135,8 @@ Required properties:
 - clocks:	contains a phandle to the syscon node describing the clocks.
 		There should then be one cell representing the clock to use
 
+Optional properties:
+
 - memory-region: A phandle to a reserved_memory region to be used for the LPC
 		to AHB mapping
 

Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt

+Cirrus Logic Lochnagar Audio Development Board
+
+Lochnagar is an evaluation and development board for Cirrus Logic
+Smart CODEC and Amp devices. It allows the connection of most Cirrus
+Logic devices on mini-cards, as well as allowing connection of
+various application processor systems to provide a full evaluation
+platform.  Audio system topology, clocking and power can all be
+controlled through the Lochnagar, allowing the device under test
+to be used in a variety of possible use cases.
+
+Also see these documents for generic binding information:
+  [1] GPIO : ../gpio/gpio.txt
+
+And these for relevant defines:
+  [2] include/dt-bindings/pinctrl/lochnagar.h
+  [3] include/dt-bindings/clock/lochnagar.h
+
+And these documents for the required sub-node binding details:
+  [4] Clock: ../clock/cirrus,lochnagar.txt
+  [5] Pinctrl: ../pinctrl/cirrus,lochnagar.txt
+  [6] Regulator: ../regulator/cirrus,lochnagar.txt
+
+Required properties:
+
+  - compatible : One of the following strings:
+                 "cirrus,lochnagar1"
+                 "cirrus,lochnagar2"
+
+  - reg : I2C slave address
+
+  - reset-gpios : Reset line to the Lochnagar, see [1].
+
+Required sub-nodes:
+
+  - lochnagar-clk : Binding for the clocking components, see [4].
+
+  - lochnagar-pinctrl : Binding for the pin control components, see [5].
+
+Optional sub-nodes:
+
+  - Bindings for the regulator components, see [6]. Only available on
+    Lochnagar 2.
+
+Optional properties:
+
+  - present-gpios : Host present line, indicating the presence of a
+    host system, see [1]. This can be omitted if the present line is
+    tied in hardware.
+
+Example:
+
+lochnagar: lochnagar@22 {
+	compatible = "cirrus,lochnagar2";
+	reg = <0x22>;
+
+	reset-gpios = <&gpio0 55 0>;
+	present-gpios = <&gpio0 60 0>;
+
+	lochnagar-clk {
+		compatible = "cirrus,lochnagar2-clk";
+		...
+	};
+
+	lochnagar-pinctrl {
+		compatible = "cirrus,lochnagar-pinctrl";
+		...
+	};
+};

Documentation/devicetree/bindings/mfd/st,stpmic1.txt

+* STMicroelectronics STPMIC1 Power Management IC
+
+Required properties:
+- compatible:		: "st,stpmic1"
+- reg:			: The I2C slave address for the STPMIC1 chip.
+- interrupts:		: The interrupt line the device is connected to.
+- #interrupt-cells:	: Should be 1.
+- interrupt-controller:	: Marks the device node as an interrupt controller.
+			    Interrupt numbers are defined at
+			    dt-bindings/mfd/st,stpmic1.h.
+
+STPMIC1 consists in a varied group of sub-devices.
+Each sub-device binding is be described in own documentation file.
+
+Device			 Description
+------			------------
+st,stpmic1-onkey	: Power on key, see ../input/st,stpmic1-onkey.txt
+st,stpmic1-regulators	: Regulators, see ../regulator/st,stpmic1-regulator.txt
+st,stpmic1-wdt		: Watchdog, see ../watchdog/st,stpmic1-wdt.txt
+
+Example:
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+pmic: pmic@33 {
+	compatible = "st,stpmic1";
+	reg = <0x33>;
+	interrupt-parent = <&gpioa>;
+	interrupts = <0 2>;
+
+	interrupt-controller;
+	#interrupt-cells = <2>;
+
+	onkey {
+		compatible = "st,stpmic1-onkey";
+		interrupts = <IT_PONKEY_F 0>,<IT_PONKEY_R 1>;
+		interrupt-names = "onkey-falling", "onkey-rising";
+		power-off-time-sec = <10>;
+	};
+
+	watchdog {
+		compatible = "st,stpmic1-wdt";
+	};
+
+	regulators {
+		compatible = "st,stpmic1-regulators";
+
+		vdd_core: buck1 {
+			regulator-name = "vdd_core";
+			regulator-boot-on;
+			regulator-min-microvolt = <700000>;
+			regulator-max-microvolt = <1200000>;
+		};
+		vdd: buck3 {
+			regulator-name = "vdd";
+			regulator-min-microvolt = <3300000>;
+			regulator-max-microvolt = <3300000>;
+			regulator-boot-on;
+			regulator-pull-down;
+		};
+	};

Documentation/devicetree/bindings/mfd/stmpe.txt

@@ -4,15 +4,29 @@ STMPE is an MFD device which may expose the following inbuilt devices: gpio,
 keypad, touchscreen, adc, pwm, rotator.
 
 Required properties:
- - compatible                   : "st,stmpe[610|801|811|1600|1601|2401|2403]"
- - reg                          : I2C/SPI address of the device
+ - compatible			: "st,stmpe[610|801|811|1600|1601|2401|2403]"
+ - reg				: I2C/SPI address of the device
 
 Optional properties:
- - interrupts                   : The interrupt outputs from the controller
- - interrupt-controller         : Marks the device node as an interrupt controller
- - wakeup-source                : Marks the input device as wakable
- - st,autosleep-timeout         : Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
- - irq-gpio                     : If present, which GPIO to use for event IRQ
+ - interrupts			: The interrupt outputs from the controller
+ - interrupt-controller		: Marks the device node as an interrupt controller
+ - wakeup-source		: Marks the input device as wakable
+ - st,autosleep-timeout		: Valid entries (ms); 4, 16, 32, 64, 128, 256, 512 and 1024
+ - irq-gpio			: If present, which GPIO to use for event IRQ
+
+Optional properties for devices with touch and ADC (STMPE811|STMPE610):
+ - st,sample-time		: ADC conversion time in number of clock.
+					0 -> 36 clocks		4 -> 80 clocks (recommended)
+					1 -> 44 clocks		5 -> 96 clocks
+					2 -> 56 clocks		6 -> 124 clocks
+					3 -> 64 clocks
+ - st,mod-12b			: ADC Bit mode
+					0 -> 10bit ADC		1 -> 12bit ADC
+ - st,ref-sel			: ADC reference source
+					0 -> internal		1 -> external
+ - st,adc-freq			: ADC Clock speed
+					0 -> 1.625 MHz		2 || 3 -> 6.5 MHz
+					1 -> 3.25 MHz
 
 Example:
 

Documentation/devicetree/bindings/watchdog/st,stpmic1-wdt.txt

+STMicroelectronics STPMIC1 Watchdog
+
+Required properties:
+
+- compatible : should be "st,stpmic1-wdt"
+
+Example:
+
+watchdog {
+	compatible = "st,stpmic1-wdt";
+};

MAINTAINERS

@@ -3777,6 +3777,23 @@ L:	netdev@vger.kernel.org
 S:	Maintained
 F:	drivers/net/ethernet/cirrus/ep93xx_eth.c
 
+CIRRUS LOGIC LOCHNAGAR DRIVER
+M:	Charles Keepax <ckeepax@opensource.cirrus.com>
+M:	Richard Fitzgerald <rf@opensource.cirrus.com>
+L:	patches@opensource.cirrus.com
+S:	Supported
+F:	drivers/clk/clk-lochnagar.c
+F:	drivers/mfd/lochnagar-i2c.c
+F:	drivers/pinctrl/cirrus/pinctrl-lochnagar.c
+F:	drivers/regulator/lochnagar-regulator.c
+F:	include/dt-bindings/clk/lochnagar.h
+F:	include/dt-bindings/pinctrl/lochnagar.h
+F:	include/linux/mfd/lochnagar*
+F:	Documentation/devicetree/bindings/mfd/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/clock/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/pinctrl/cirrus,lochnagar.txt
+F:	Documentation/devicetree/bindings/regulator/cirrus,lochnagar.txt
+
 CISCO FCOE HBA DRIVER
 M:	Satish Kharat <satishkh@cisco.com>
 M:	Sesidhar Baddela <sebaddel@cisco.com>

drivers/iio/adc/Kconfig

@@ -817,6 +817,13 @@ config STM32_DFSDM_ADC
 	  This driver can also be built as a module.  If so, the module
 	  will be called stm32-dfsdm-adc.
 
+config STMPE_ADC
+	tristate "STMicroelectronics STMPE ADC driver"
+	depends on OF && MFD_STMPE
+	help
+	  Say yes here to build support for ST Microelectronics STMPE
+	  built-in ADC block (stmpe811).
+
 config STX104
 	tristate "Apex Embedded Systems STX104 driver"
 	depends on PC104 && X86

drivers/iio/adc/Makefile

@@ -77,6 +77,7 @@ obj-$(CONFIG_STM32_ADC_CORE) += stm32-adc-core.o
 obj-$(CONFIG_STM32_ADC) += stm32-adc.o
 obj-$(CONFIG_STM32_DFSDM_CORE) += stm32-dfsdm-core.o
 obj-$(CONFIG_STM32_DFSDM_ADC) += stm32-dfsdm-adc.o
+obj-$(CONFIG_STMPE_ADC) += stmpe-adc.o
 obj-$(CONFIG_TI_ADC081C) += ti-adc081c.o
 obj-$(CONFIG_TI_ADC0832) += ti-adc0832.o
 obj-$(CONFIG_TI_ADC084S021) += ti-adc084s021.o

drivers/iio/adc/stmpe-adc.c

+// SPDX-License-Identifier: GPL-2.0
+/*
+ *  STMicroelectronics STMPE811 IIO ADC Driver
+ *
+ *  4 channel, 10/12-bit ADC
+ *
+ *  Copyright (C) 2013-2018 Toradex AG <stefan.agner@toradex.com>
+ */
+
+#include <linux/completion.h>
+#include <linux/err.h>
+#include <linux/iio/iio.h>
+#include <linux/interrupt.h>
+#include <linux/kernel.h>
+#include <linux/mfd/stmpe.h>
+#include <linux/module.h>
+#include <linux/of_platform.h>
+#include <linux/platform_device.h>
+#include <linux/device.h>
+
+#define STMPE_REG_INT_STA		0x0B
+#define STMPE_REG_ADC_INT_EN		0x0E
+#define STMPE_REG_ADC_INT_STA		0x0F
+
+#define STMPE_REG_ADC_CTRL1		0x20
+#define STMPE_REG_ADC_CTRL2		0x21
+#define STMPE_REG_ADC_CAPT		0x22
+#define STMPE_REG_ADC_DATA_CH(channel)	(0x30 + 2 * (channel))
+
+#define STMPE_REG_TEMP_CTRL		0x60
+#define STMPE_TEMP_CTRL_ENABLE		BIT(0)
+#define STMPE_TEMP_CTRL_ACQ		BIT(1)
+#define STMPE_TEMP_CTRL_THRES_EN	BIT(3)
+#define STMPE_START_ONE_TEMP_CONV	(STMPE_TEMP_CTRL_ENABLE | \
+					STMPE_TEMP_CTRL_ACQ | \
+					STMPE_TEMP_CTRL_THRES_EN)
+#define STMPE_REG_TEMP_DATA		0x61
+#define STMPE_REG_TEMP_TH		0x63
+#define STMPE_ADC_LAST_NR		7
+#define STMPE_TEMP_CHANNEL		(STMPE_ADC_LAST_NR + 1)
+
+#define STMPE_ADC_CH(channel)		((1 << (channel)) & 0xff)
+
+#define STMPE_ADC_TIMEOUT		msecs_to_jiffies(1000)
+
+struct stmpe_adc {
+	struct stmpe *stmpe;
+	struct clk *clk;
+	struct device *dev;
+	struct mutex lock;
+
+	/* We are allocating plus one for the temperature channel */
+	struct iio_chan_spec stmpe_adc_iio_channels[STMPE_ADC_LAST_NR + 2];
+
+	struct completion completion;
+
+	u8 channel;
+	u32 value;
+};
+
+static int stmpe_read_voltage(struct stmpe_adc *info,
+		struct iio_chan_spec const *chan, int *val)
+{
+	long ret;
+
+	mutex_lock(&info->lock);
+
+	info->channel = (u8)chan->channel;
+
+	if (info->channel > STMPE_ADC_LAST_NR) {
+		mutex_unlock(&info->lock);
+		return -EINVAL;
+	}
+
+	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_EN,
+			STMPE_ADC_CH(info->channel));
+
+	stmpe_reg_write(info->stmpe, STMPE_REG_ADC_CAPT,
+			STMPE_ADC_CH(info->channel));
+
+	*val = info->value;
+
+	ret = wait_for_completion_interruptible_timeout
+		(&info->completion, STMPE_ADC_TIMEOUT);
+
+	if (ret <= 0) {
+		mutex_unlock(&info->lock);
+		if (ret == 0)
+			return -ETIMEDOUT;
+		else
+			return ret;
+	}
+
+	*val = info->value;
+
+	mutex_unlock(&info->lock);
+
+	return 0;
+}
+
+static int stmpe_read_temp(struct stmpe_adc *info,
+		struct iio_chan_spec const *chan, int *val)
+{
+	long ret;
+
+	mutex_lock(&info->lock);
+
+	info->channel = (u8)chan->channel;
+
+	if (info->channel != STMPE_TEMP_CHANNEL) {
+		mutex_unlock(&info->lock);
+		return -EINVAL;
+	}
+
+	stmpe_reg_write(info->stmpe, STMPE_REG_TEMP_CTRL,
+			STMPE_START_ONE_TEMP_CONV);
+
+	ret = wait_for_completion_interruptible_timeout
+		(&info->completion, STMPE_ADC_TIMEOUT);
+
+	if (ret <= 0) {
+		mutex_unlock(&info->lock);
+		if (ret == 0)
+			return -ETIMEDOUT;
+		else
+			return ret;
+	}
+
+	/*
+	 * absolute temp = +V3.3 * value /7.51 [K]
+	 * scale to [milli °C]
+	 */
+	*val = ((449960l * info->value) / 1024l) - 273150;
+
+	mutex_unlock(&info->lock);
+
+	return 0;
+}
+
+static int stmpe_read_raw(struct iio_dev *indio_dev,
+			  struct iio_chan_spec const *chan,
+			  int *val,
+			  int *val2,
+			  long mask)
+{
+	struct stmpe_adc *info = iio_priv(indio_dev);
+	long ret;
+
+	switch (mask) {
+	case IIO_CHAN_INFO_RAW:
+	case IIO_CHAN_INFO_PROCESSED:
+
+		switch (chan->type) {
+		case IIO_VOLTAGE:
+			ret = stmpe_read_voltage(info, chan, val);
+			break;
+
+		case IIO_TEMP:
+			ret = stmpe_read_temp(info, chan, val);
+			break;
+		default:
+			return -EINVAL;
+		}
+
+		if (ret < 0)
+			return ret;
+
+		return IIO_VAL_INT;
+
+	case IIO_CHAN_INFO_SCALE:
+		*val = 3300;
+		*val2 = info->stmpe->mod_12b ? 12 : 10;
+		return IIO_VAL_FRACTIONAL_LOG2;
+
+	default:
+		break;
+	}
+
+	return -EINVAL;
+}
+
+static irqreturn_t stmpe_adc_isr(int irq, void *dev_id)
+{
+	struct stmpe_adc *info = (struct stmpe_adc *)dev_id;
+	u16 data;
+
+	if (info->channel > STMPE_TEMP_CHANNEL)
+		return IRQ_NONE;
+
+	if (info->channel <= STMPE_ADC_LAST_NR) {
+		int int_sta;
+
+		int_sta = stmpe_reg_read(info->stmpe, STMPE_REG_ADC_INT_STA);
+
+		/* Is the interrupt relevant */
+		if (!(int_sta & STMPE_ADC_CH(info->channel)))
+			return IRQ_NONE;
+
+		/* Read value */
+		stmpe_block_read(info->stmpe,
+			STMPE_REG_ADC_DATA_CH(info->channel), 2, (u8 *) &data);
+
+		stmpe_reg_write(info->stmpe, STMPE_REG_ADC_INT_STA, int_sta);
+	} else if (info->channel == STMPE_TEMP_CHANNEL) {
+		/* Read value */
+		stmpe_block_read(info->stmpe, STMPE_REG_TEMP_DATA, 2,
+				(u8 *) &data);
+	}
+
+	info->value = (u32) be16_to_cpu(data);
+	complete(&info->completion);
+
+	return IRQ_HANDLED;
+}
+
+static const struct iio_info stmpe_adc_iio_info = {
+	.read_raw = &stmpe_read_raw,
+};
+
+static void stmpe_adc_voltage_chan(struct iio_chan_spec *ics, int chan)
+{
+	ics->type = IIO_VOLTAGE;
+	ics->info_mask_separate = BIT(IIO_CHAN_INFO_RAW);
+	ics->info_mask_shared_by_type = BIT(IIO_CHAN_INFO_SCALE);
+	ics->indexed = 1;
+	ics->channel = chan;
+}
+
+static void stmpe_adc_temp_chan(struct iio_chan_spec *ics, int chan)
+{
+	ics->type = IIO_TEMP;
+	ics->info_mask_separate = BIT(IIO_CHAN_INFO_PROCESSED);
+	ics->indexed = 1;
+	ics->channel = chan;
+}
+
+static int stmpe_adc_init_hw(struct stmpe_adc *adc)
+{
+	int ret;
+	struct stmpe *stmpe = adc->stmpe;
+
+	ret = stmpe_enable(stmpe, STMPE_BLOCK_ADC);
+	if (ret) {
+		dev_err(stmpe->dev, "Could not enable clock for ADC\n");
+		return ret;
+	}
+
+	ret = stmpe811_adc_common_init(stmpe);
+	if (ret) {
+		stmpe_disable(stmpe, STMPE_BLOCK_ADC);
+		return ret;
+	}
+
+	/* use temp irq for each conversion completion */
+	stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH, 0);
+	stmpe_reg_write(stmpe, STMPE_REG_TEMP_TH + 1, 0);
+
+	return 0;
+}
+
+static int stmpe_adc_probe(struct platform_device *pdev)
+{
+	struct iio_dev *indio_dev;
+	struct stmpe_adc *info;
+	struct device_node *np;
+	u32 norequest_mask = 0;
+	int irq_temp, irq_adc;
+	int num_chan = 0;
+	int i = 0;
+	int ret;
+
+	irq_adc = platform_get_irq_byname(pdev, "STMPE_ADC");
+	if (irq_adc < 0)
+		return irq_adc;
+
+	indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(struct stmpe_adc));
+	if (!indio_dev) {
+		dev_err(&pdev->dev, "failed allocating iio device\n");
+		return -ENOMEM;
+	}
+
+	info = iio_priv(indio_dev);
+	mutex_init(&info->lock);
+
+	init_completion(&info->completion);
+	ret = devm_request_threaded_irq(&pdev->dev, irq_adc, NULL,
+					stmpe_adc_isr, IRQF_ONESHOT,
+					"stmpe-adc", info);
+	if (ret < 0) {
+		dev_err(&pdev->dev, "failed requesting irq, irq = %d\n",
+				irq_adc);
+		return ret;
+	}
+
+	irq_temp = platform_get_irq_byname(pdev, "STMPE_TEMP_SENS");
+	if (irq_temp >= 0) {
+		ret = devm_request_threaded_irq(&pdev->dev, irq_temp, NULL,
+						stmpe_adc_isr, IRQF_ONESHOT,
+						"stmpe-adc", info);
+		if (ret < 0)
+			dev_warn(&pdev->dev, "failed requesting irq for"
+				 " temp sensor, irq = %d\n", irq_temp);
+	}
+
+	platform_set_drvdata(pdev, indio_dev);
+
+	indio_dev->name		= dev_name(&pdev->dev);
+	indio_dev->dev.parent	= &pdev->dev;
+	indio_dev->info		= &stmpe_adc_iio_info;
+	indio_dev->modes	= INDIO_DIRECT_MODE;
+
+	info->stmpe = dev_get_drvdata(pdev->dev.parent);
+
+	np = pdev->dev.of_node;
+
+	if (!np)
+		dev_err(&pdev->dev, "no device tree node found\n");
+
+	of_property_read_u32(np, "st,norequest-mask", &norequest_mask);
+
+	for_each_clear_bit(i, (unsigned long *) &norequest_mask,
+			   (STMPE_ADC_LAST_NR + 1)) {
+		stmpe_adc_voltage_chan(&info->stmpe_adc_iio_channels[num_chan], i);
+		num_chan++;
+	}
+	stmpe_adc_temp_chan(&info->stmpe_adc_iio_channels[num_chan], i);
+	num_chan++;
+	indio_dev->channels = info->stmpe_adc_iio_channels;
+	indio_dev->num_channels = num_chan;
+
+	ret = stmpe_adc_init_hw(info);
+	if (ret)
+		return ret;
+
+	return devm_iio_device_register(&pdev->dev, indio_dev);
+}
+
+static int __maybe_unused stmpe_adc_resume(struct device *dev)
+{
+	struct iio_dev *indio_dev = dev_get_drvdata(dev);
+	struct stmpe_adc *info = iio_priv(indio_dev);
+
+	stmpe_adc_init_hw(info);
+
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stmpe_adc_pm_ops, NULL, stmpe_adc_resume);
+
+static struct platform_driver stmpe_adc_driver = {
+	.probe		= stmpe_adc_probe,
+	.driver		= {
+		.name	= "stmpe-adc",
+		.pm	= &stmpe_adc_pm_ops,
+	},
+};
+
+module_platform_driver(stmpe_adc_driver);
+
+MODULE_AUTHOR("Stefan Agner <stefan.agner@toradex.com>");
+MODULE_DESCRIPTION("STMPEXXX ADC driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:stmpe-adc");

drivers/input/misc/Kconfig

@@ -851,4 +851,15 @@ config INPUT_SC27XX_VIBRA
 	  To compile this driver as a module, choose M here. The module will
 	  be called sc27xx_vibra.
 
+config INPUT_STPMIC1_ONKEY
+	tristate "STPMIC1 PMIC Onkey support"
+	depends on MFD_STPMIC1
+	help
+	  Say Y to enable support of onkey embedded into STPMIC1 PMIC. onkey
+	  can be used to wakeup from low power modes and force a shut-down on
+	  long press.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stpmic1_onkey.
+
 endif

drivers/input/misc/Makefile

@@ -71,6 +71,7 @@ obj-$(CONFIG_INPUT_SGI_BTNS)		+= sgi_btns.o
 obj-$(CONFIG_INPUT_SIRFSOC_ONKEY)	+= sirfsoc-onkey.o
 obj-$(CONFIG_INPUT_SOC_BUTTON_ARRAY)	+= soc_button_array.o
 obj-$(CONFIG_INPUT_SPARCSPKR)		+= sparcspkr.o
+obj-$(CONFIG_INPUT_STPMIC1_ONKEY)  	+= stpmic1_onkey.o
 obj-$(CONFIG_INPUT_TPS65218_PWRBUTTON)	+= tps65218-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_PWRBUTTON)	+= twl4030-pwrbutton.o
 obj-$(CONFIG_INPUT_TWL4030_VIBRA)	+= twl4030-vibra.o
@@ -81,3 +82,4 @@ obj-$(CONFIG_INPUT_WM831X_ON)		+= wm831x-on.o
 obj-$(CONFIG_INPUT_XEN_KBDDEV_FRONTEND)	+= xen-kbdfront.o
 obj-$(CONFIG_INPUT_YEALINK)		+= yealink.o
 obj-$(CONFIG_INPUT_IDEAPAD_SLIDEBAR)	+= ideapad_slidebar.o
+

drivers/input/misc/stpmic1_onkey.c

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+
+#include <linux/input.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+
+/**
+ * struct stpmic1_onkey - OnKey data
+ * @input_dev:		pointer to input device
+ * @irq_falling:	irq that we are hooked on to
+ * @irq_rising:		irq that we are hooked on to
+ */
+struct stpmic1_onkey {
+	struct input_dev *input_dev;
+	int irq_falling;
+	int irq_rising;
+};
+
+static irqreturn_t onkey_falling_irq(int irq, void *ponkey)
+{
+	struct stpmic1_onkey *onkey = ponkey;
+	struct input_dev *input_dev = onkey->input_dev;
+
+	input_report_key(input_dev, KEY_POWER, 1);
+	pm_wakeup_event(input_dev->dev.parent, 0);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t onkey_rising_irq(int irq, void *ponkey)
+{
+	struct stpmic1_onkey *onkey = ponkey;
+	struct input_dev *input_dev = onkey->input_dev;
+
+	input_report_key(input_dev, KEY_POWER, 0);
+	pm_wakeup_event(input_dev->dev.parent, 0);
+	input_sync(input_dev);
+
+	return IRQ_HANDLED;
+}
+
+static int stpmic1_onkey_probe(struct platform_device *pdev)
+{
+	struct stpmic1 *pmic = dev_get_drvdata(pdev->dev.parent);
+	struct device *dev = &pdev->dev;
+	struct input_dev *input_dev;
+	struct stpmic1_onkey *onkey;
+	unsigned int val, reg = 0;
+	int error;
+
+	onkey = devm_kzalloc(dev, sizeof(*onkey), GFP_KERNEL);
+	if (!onkey)
+		return -ENOMEM;
+
+	onkey->irq_falling = platform_get_irq_byname(pdev, "onkey-falling");
+	if (onkey->irq_falling < 0) {
+		dev_err(dev, "failed: request IRQ onkey-falling %d\n",
+			onkey->irq_falling);
+		return onkey->irq_falling;
+	}
+
+	onkey->irq_rising = platform_get_irq_byname(pdev, "onkey-rising");
+	if (onkey->irq_rising < 0) {
+		dev_err(dev, "failed: request IRQ onkey-rising %d\n",
+			onkey->irq_rising);
+		return onkey->irq_rising;
+	}
+
+	if (!device_property_read_u32(dev, "power-off-time-sec", &val)) {
+		if (val > 0 && val <= 16) {
+			dev_dbg(dev, "power-off-time=%d seconds\n", val);
+			reg |= PONKEY_PWR_OFF;
+			reg |= ((16 - val) & PONKEY_TURNOFF_TIMER_MASK);
+		} else {
+			dev_err(dev, "power-off-time-sec out of range\n");
+			return -EINVAL;
+		}
+	}
+
+	if (device_property_present(dev, "st,onkey-clear-cc-flag"))
+		reg |= PONKEY_CC_FLAG_CLEAR;
+
+	error = regmap_update_bits(pmic->regmap, PKEY_TURNOFF_CR,
+				   PONKEY_TURNOFF_MASK, reg);
+	if (error) {
+		dev_err(dev, "PKEY_TURNOFF_CR write failed: %d\n", error);
+		return error;
+	}
+
+	if (device_property_present(dev, "st,onkey-pu-inactive")) {
+		error = regmap_update_bits(pmic->regmap, PADS_PULL_CR,
+					   PONKEY_PU_INACTIVE,
+					   PONKEY_PU_INACTIVE);
+		if (error) {
+			dev_err(dev, "ONKEY Pads configuration failed: %d\n",
+				error);
+			return error;
+		}
+	}
+
+	input_dev = devm_input_allocate_device(dev);
+	if (!input_dev) {
+		dev_err(dev, "Can't allocate Pwr Onkey Input Device\n");
+		return -ENOMEM;
+	}
+
+	input_dev->name = "pmic_onkey";
+	input_dev->phys = "pmic_onkey/input0";
+
+	input_set_capability(input_dev, EV_KEY, KEY_POWER);
+
+	onkey->input_dev = input_dev;
+
+	/* interrupt is nested in a thread */
+	error = devm_request_threaded_irq(dev, onkey->irq_falling, NULL,
+					  onkey_falling_irq, IRQF_ONESHOT,
+					  dev_name(dev), onkey);
+	if (error) {
+		dev_err(dev, "Can't get IRQ Onkey Falling: %d\n", error);
+		return error;
+	}
+
+	error = devm_request_threaded_irq(dev, onkey->irq_rising, NULL,
+					  onkey_rising_irq, IRQF_ONESHOT,
+					  dev_name(dev), onkey);
+	if (error) {
+		dev_err(dev, "Can't get IRQ Onkey Rising: %d\n", error);
+		return error;
+	}
+
+	error = input_register_device(input_dev);
+	if (error) {
+		dev_err(dev, "Can't register power button: %d\n", error);
+		return error;
+	}
+
+	platform_set_drvdata(pdev, onkey);
+	device_init_wakeup(dev, true);
+
+	return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_suspend(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(dev)) {
+		enable_irq_wake(onkey->irq_falling);
+		enable_irq_wake(onkey->irq_rising);
+	}
+	return 0;
+}
+
+static int __maybe_unused stpmic1_onkey_resume(struct device *dev)
+{
+	struct platform_device *pdev = to_platform_device(dev);
+	struct stpmic1_onkey *onkey = platform_get_drvdata(pdev);
+
+	if (device_may_wakeup(dev)) {
+		disable_irq_wake(onkey->irq_falling);
+		disable_irq_wake(onkey->irq_rising);
+	}
+	return 0;
+}
+
+static SIMPLE_DEV_PM_OPS(stpmic1_onkey_pm,
+			 stpmic1_onkey_suspend,
+			 stpmic1_onkey_resume);
+
+static const struct of_device_id of_stpmic1_onkey_match[] = {
+	{ .compatible = "st,stpmic1-onkey" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, of_stpmic1_onkey_match);
+
+static struct platform_driver stpmic1_onkey_driver = {
+	.probe	= stpmic1_onkey_probe,
+	.driver	= {
+		.name	= "stpmic1_onkey",
+		.of_match_table = of_match_ptr(of_stpmic1_onkey_match),
+		.pm	= &stpmic1_onkey_pm,
+	},
+};
+module_platform_driver(stpmic1_onkey_driver);
+
+MODULE_DESCRIPTION("Onkey driver for STPMIC1");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");

drivers/input/touchscreen/stmpe-ts.c

@@ -30,8 +30,6 @@
  * with touchscreen controller
  */
 #define STMPE_REG_INT_STA		0x0B
-#define STMPE_REG_ADC_CTRL1		0x20
-#define STMPE_REG_ADC_CTRL2		0x21
 #define STMPE_REG_TSC_CTRL		0x40
 #define STMPE_REG_TSC_CFG		0x41
 #define STMPE_REG_FIFO_TH		0x4A
@@ -49,17 +47,6 @@
 
 #define STMPE_IRQ_TOUCH_DET		0
 
-#define SAMPLE_TIME(x)			((x & 0xf) << 4)
-#define MOD_12B(x)			((x & 0x1) << 3)
-#define REF_SEL(x)			((x & 0x1) << 1)
-#define ADC_FREQ(x)			(x & 0x3)
-#define AVE_CTRL(x)			((x & 0x3) << 6)
-#define DET_DELAY(x)			((x & 0x7) << 3)
-#define SETTLING(x)			(x & 0x7)
-#define FRACTION_Z(x)			(x & 0x7)
-#define I_DRIVE(x)			(x & 0x1)
-#define OP_MODE(x)			((x & 0x7) << 1)
-
 #define STMPE_TS_NAME			"stmpe-ts"
 #define XY_MASK				0xfff
 
@@ -69,15 +56,6 @@
  * @idev: registered input device
  * @work: a work item used to scan the device
  * @dev: a pointer back to the MFD cell struct device*
- * @sample_time: ADC converstion time in number of clock.
- * (0 -> 36 clocks, 1 -> 44 clocks, 2 -> 56 clocks, 3 -> 64 clocks,
- * 4 -> 80 clocks, 5 -> 96 clocks, 6 -> 144 clocks),
- * recommended is 4.
- * @mod_12b: ADC Bit mode (0 -> 10bit ADC, 1 -> 12bit ADC)
- * @ref_sel: ADC reference source
- * (0 -> internal reference, 1 -> external reference)
- * @adc_freq: ADC Clock speed
- * (0 -> 1.625 MHz, 1 -> 3.25 MHz, 2 || 3 -> 6.5 MHz)
  * @ave_ctrl: Sample average control
  * (0 -> 1 sample, 1 -> 2 samples, 2 -> 4 samples, 3 -> 8 samples)
  * @touch_det_delay: Touch detect interrupt delay
@@ -99,10 +77,6 @@ struct stmpe_touch {
 	struct input_dev *idev;
 	struct delayed_work work;
 	struct device *dev;
-	u8 sample_time;
-	u8 mod_12b;
-	u8 ref_sel;
-	u8 adc_freq;
 	u8 ave_ctrl;
 	u8 touch_det_delay;
 	u8 settling;
@@ -203,7 +177,7 @@ static irqreturn_t stmpe_ts_handler(int irq, void *data)
 static int stmpe_init_hw(struct stmpe_touch *ts)
 {
 	int ret;
-	u8 adc_ctrl1, adc_ctrl1_mask, tsc_cfg, tsc_cfg_mask;
+	u8 tsc_cfg, tsc_cfg_mask;
 	struct stmpe *stmpe = ts->stmpe;
 	struct device *dev = ts->dev;
 
@@ -213,27 +187,17 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
 		return ret;
 	}
 
-	adc_ctrl1 = SAMPLE_TIME(ts->sample_time) | MOD_12B(ts->mod_12b) |
-		REF_SEL(ts->ref_sel);
-	adc_ctrl1_mask = SAMPLE_TIME(0xff) | MOD_12B(0xff) | REF_SEL(0xff);
-
-	ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL1,
-			adc_ctrl1_mask, adc_ctrl1);
-	if (ret) {
-		dev_err(dev, "Could not setup ADC\n");
-		return ret;
-	}
-
-	ret = stmpe_set_bits(stmpe, STMPE_REG_ADC_CTRL2,
-			ADC_FREQ(0xff), ADC_FREQ(ts->adc_freq));
+	ret = stmpe811_adc_common_init(stmpe);
 	if (ret) {
-		dev_err(dev, "Could not setup ADC\n");
+		stmpe_disable(stmpe, STMPE_BLOCK_TOUCHSCREEN | STMPE_BLOCK_ADC);
 		return ret;
 	}
 
-	tsc_cfg = AVE_CTRL(ts->ave_ctrl) | DET_DELAY(ts->touch_det_delay) |
-			SETTLING(ts->settling);
-	tsc_cfg_mask = AVE_CTRL(0xff) | DET_DELAY(0xff) | SETTLING(0xff);
+	tsc_cfg = STMPE_AVE_CTRL(ts->ave_ctrl) |
+		  STMPE_DET_DELAY(ts->touch_det_delay) |
+		  STMPE_SETTLING(ts->settling);
+	tsc_cfg_mask = STMPE_AVE_CTRL(0xff) | STMPE_DET_DELAY(0xff) |
+		       STMPE_SETTLING(0xff);
 
 	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CFG, tsc_cfg_mask, tsc_cfg);
 	if (ret) {
@@ -242,14 +206,14 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
 	}
 
 	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_FRACTION_Z,
-			FRACTION_Z(0xff), FRACTION_Z(ts->fraction_z));
+			STMPE_FRACTION_Z(0xff), STMPE_FRACTION_Z(ts->fraction_z));
 	if (ret) {
 		dev_err(dev, "Could not config touch\n");
 		return ret;
 	}
 
 	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_I_DRIVE,
-			I_DRIVE(0xff), I_DRIVE(ts->i_drive));
+			STMPE_I_DRIVE(0xff), STMPE_I_DRIVE(ts->i_drive));
 	if (ret) {
 		dev_err(dev, "Could not config touch\n");
 		return ret;
@@ -263,7 +227,7 @@ static int stmpe_init_hw(struct stmpe_touch *ts)
 	}
 
 	ret = stmpe_set_bits(stmpe, STMPE_REG_TSC_CTRL,
-			OP_MODE(0xff), OP_MODE(OP_MOD_XYZ));
+			STMPE_OP_MODE(0xff), STMPE_OP_MODE(OP_MOD_XYZ));
 	if (ret) {
 		dev_err(dev, "Could not set mode\n");
 		return ret;
@@ -303,13 +267,13 @@ static void stmpe_ts_get_platform_info(struct platform_device *pdev,
 
 	if (np) {
 		if (!of_property_read_u32(np, "st,sample-time", &val))
-			ts->sample_time = val;
+			ts->stmpe->sample_time = val;
 		if (!of_property_read_u32(np, "st,mod-12b", &val))
-			ts->mod_12b = val;
+			ts->stmpe->mod_12b = val;
 		if (!of_property_read_u32(np, "st,ref-sel", &val))
-			ts->ref_sel = val;
+			ts->stmpe->ref_sel = val;
 		if (!of_property_read_u32(np, "st,adc-freq", &val))
-			ts->adc_freq = val;
+			ts->stmpe->adc_freq = val;
 		if (!of_property_read_u32(np, "st,ave-ctrl", &val))
 			ts->ave_ctrl = val;
 		if (!of_property_read_u32(np, "st,touch-det-delay", &val))

drivers/mfd/Kconfig

@@ -215,7 +215,6 @@ config MFD_CROS_EC
 config MFD_CROS_EC_CHARDEV
         tristate "Chrome OS Embedded Controller userspace device interface"
         depends on MFD_CROS_EC
-        select CROS_EC_CTL
         ---help---
           This driver adds support to talk with the ChromeOS EC from userspace.
 
@@ -519,10 +518,10 @@ config INTEL_SOC_PMIC
 	bool "Support for Crystal Cove PMIC"
 	depends on ACPI && HAS_IOMEM && I2C=y && GPIOLIB && COMMON_CLK
 	depends on X86 || COMPILE_TEST
+	depends on I2C_DESIGNWARE_PLATFORM=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	select I2C_DESIGNWARE_PLATFORM
 	help
 	  Select this option to enable support for Crystal Cove PMIC
 	  on some Intel SoC systems. The PMIC provides ADC, GPIO,
@@ -548,10 +547,10 @@ config INTEL_SOC_PMIC_CHTWC
 	bool "Support for Intel Cherry Trail Whiskey Cove PMIC"
 	depends on ACPI && HAS_IOMEM && I2C=y && COMMON_CLK
 	depends on X86 || COMPILE_TEST
+	depends on I2C_DESIGNWARE_PLATFORM=y
 	select MFD_CORE
 	select REGMAP_I2C
 	select REGMAP_IRQ
-	select I2C_DESIGNWARE_PLATFORM
 	help
 	  Select this option to enable support for the Intel Cherry Trail
 	  Whiskey Cove PMIC found on some Intel Cherry Trail systems.
@@ -1205,7 +1204,7 @@ config MFD_STMPE
 
 	  Currently supported devices are:
 
-		STMPE811: GPIO, Touchscreen
+		STMPE811: GPIO, Touchscreen, ADC
 		STMPE1601: GPIO, Keypad
 		STMPE1801: GPIO, Keypad
 		STMPE2401: GPIO, Keypad
@@ -1218,6 +1217,7 @@ config MFD_STMPE
 		GPIO: stmpe-gpio
 		Keypad: stmpe-keypad
 		Touchscreen: stmpe-ts
+		ADC: stmpe-adc
 
 menu "STMicroelectronics STMPE Interface Drivers"
 depends on MFD_STMPE
@@ -1420,9 +1420,9 @@ config MFD_TPS65217
 config MFD_TPS68470
 	bool "TI TPS68470 Power Management / LED chips"
 	depends on ACPI && PCI && I2C=y
+	depends on I2C_DESIGNWARE_PLATFORM=y
 	select MFD_CORE
 	select REGMAP_I2C
-	select I2C_DESIGNWARE_PLATFORM
 	help
 	  If you say yes here you get support for the TPS68470 series of
 	  Power Management / LED chips.
@@ -1677,6 +1677,14 @@ config MFD_TC6393XB
 	help
 	  Support for Toshiba Mobile IO Controller TC6393XB
 
+config MFD_TQMX86
+	tristate "TQ-Systems IO controller TQMX86"
+	select MFD_CORE
+	help
+	  Say yes here to enable support for various functions of the
+	  TQ-Systems IO controller and watchdog device, found on their
+	  ComExpress CPU modules.
+
 config MFD_VX855
 	tristate "VIA VX855/VX875 integrated south bridge"
 	depends on PCI
@@ -1686,6 +1694,14 @@ config MFD_VX855
 	  VIA VX855/VX875 south bridge. You will need to enable the vx855_spi
 	  and/or vx855_gpio drivers for this to do anything useful.
 
+config MFD_LOCHNAGAR
+	bool "Cirrus Logic Lochnagar Audio Development Board"
+	select MFD_CORE
+	select REGMAP_I2C
+	depends on I2C=y && OF
+	help
+	  Support for Cirrus Logic Lochnagar audio development board.
+
 config MFD_ARIZONA
 	select REGMAP
 	select REGMAP_IRQ
@@ -1872,6 +1888,22 @@ config MFD_STM32_TIMERS
 	  for PWM and IIO Timer. This driver allow to share the
 	  registers between the others drivers.
 
+config MFD_STPMIC1
+	tristate "Support for STPMIC1 PMIC"
+	depends on (I2C=y && OF)
+	select REGMAP_I2C
+	select REGMAP_IRQ
+	select MFD_CORE
+	help
+	  Support for ST Microelectronics STPMIC1 PMIC. STPMIC1 has power on
+	  key, watchdog and regulator functionalities which are supported via
+	  the relevant subsystems. This driver provides core support for the
+	  STPMIC1. In order to use the actual functionaltiy of the device other
+	  drivers must be enabled.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called stpmic1.
+
 menu "Multimedia Capabilities Port drivers"
 	depends on ARCH_SA1100
 

drivers/mfd/Makefile

@@ -37,6 +37,9 @@ obj-$(CONFIG_MFD_TC3589X)	+= tc3589x.o
 obj-$(CONFIG_MFD_T7L66XB)	+= t7l66xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6387XB)	+= tc6387xb.o tmio_core.o
 obj-$(CONFIG_MFD_TC6393XB)	+= tc6393xb.o tmio_core.o
+obj-$(CONFIG_MFD_TQMX86)	+= tqmx86.o
+
+obj-$(CONFIG_MFD_LOCHNAGAR)	+= lochnagar-i2c.o
 
 obj-$(CONFIG_MFD_ARIZONA)	+= arizona-core.o
 obj-$(CONFIG_MFD_ARIZONA)	+= arizona-irq.o
@@ -234,6 +237,7 @@ obj-$(CONFIG_INTEL_SOC_PMIC_CHTDC_TI)	+= intel_soc_pmic_chtdc_ti.o
 obj-$(CONFIG_MFD_MT6397)	+= mt6397-core.o
 
 obj-$(CONFIG_MFD_ALTERA_A10SR)	+= altera-a10sr.o
+obj-$(CONFIG_MFD_STPMIC1)	+= stpmic1.o
 obj-$(CONFIG_MFD_SUN4I_GPADC)	+= sun4i-gpadc.o
 
 obj-$(CONFIG_MFD_STM32_LPTIMER)	+= stm32-lptimer.o

drivers/mfd/aat2870-core.c

@@ -20,7 +20,6 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/debugfs.h>
 #include <linux/slab.h>
@@ -349,18 +348,10 @@ static void aat2870_init_debugfs(struct aat2870_data *aat2870)
 			 "Failed to create debugfs register file\n");
 }
 
-static void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
-{
-	debugfs_remove_recursive(aat2870->dentry_root);
-}
 #else
 static inline void aat2870_init_debugfs(struct aat2870_data *aat2870)
 {
 }
-
-static inline void aat2870_uninit_debugfs(struct aat2870_data *aat2870)
-{
-}
 #endif /* CONFIG_DEBUG_FS */
 
 static int aat2870_i2c_probe(struct i2c_client *client,
@@ -440,20 +431,6 @@ static int aat2870_i2c_probe(struct i2c_client *client,
 	return ret;
 }
 
-static int aat2870_i2c_remove(struct i2c_client *client)
-{
-	struct aat2870_data *aat2870 = i2c_get_clientdata(client);
-
-	aat2870_uninit_debugfs(aat2870);
-
-	mfd_remove_devices(aat2870->dev);
-	aat2870_disable(aat2870);
-	if (aat2870->uninit)
-		aat2870->uninit(aat2870);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int aat2870_i2c_suspend(struct device *dev)
 {
@@ -492,15 +469,14 @@ static const struct i2c_device_id aat2870_i2c_id_table[] = {
 	{ "aat2870", 0 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, aat2870_i2c_id_table);
 
 static struct i2c_driver aat2870_i2c_driver = {
 	.driver = {
-		.name	= "aat2870",
-		.pm	= &aat2870_pm_ops,
+		.name			= "aat2870",
+		.pm			= &aat2870_pm_ops,
+		.suppress_bind_attrs	= true,
 	},
 	.probe		= aat2870_i2c_probe,
-	.remove		= aat2870_i2c_remove,
 	.id_table	= aat2870_i2c_id_table,
 };
 
@@ -509,13 +485,3 @@ static int __init aat2870_init(void)
 	return i2c_add_driver(&aat2870_i2c_driver);
 }
 subsys_initcall(aat2870_init);
-
-static void __exit aat2870_exit(void)
-{
-	i2c_del_driver(&aat2870_i2c_driver);
-}
-module_exit(aat2870_exit);
-
-MODULE_DESCRIPTION("Core support for the AnalogicTech AAT2870");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Jin Park <jinyoungp@nvidia.com>");

drivers/mfd/adp5520.c

@@ -7,6 +7,8 @@
  *
  * Copyright 2009 Analog Devices Inc.
  *
+ * Author: Michael Hennerich <michael.hennerich@analog.com>
+ *
  * Derived from da903x:
  * Copyright (C) 2008 Compulab, Ltd.
  *	Mike Rapoport <mike@compulab.co.il>
@@ -18,7 +20,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/platform_device.h>
 #include <linux/slab.h>
 #include <linux/interrupt.h>
@@ -304,18 +306,6 @@ static int adp5520_probe(struct i2c_client *client,
 	return ret;
 }
 
-static int adp5520_remove(struct i2c_client *client)
-{
-	struct adp5520_chip *chip = dev_get_drvdata(&client->dev);
-
-	if (chip->irq)
-		free_irq(chip->irq, chip);
-
-	adp5520_remove_subdevs(chip);
-	adp5520_write(chip->dev, ADP5520_MODE_STATUS, 0);
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int adp5520_suspend(struct device *dev)
 {
@@ -346,20 +336,14 @@ static const struct i2c_device_id adp5520_id[] = {
 	{ "pmic-adp5501", ID_ADP5501 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, adp5520_id);
 
 static struct i2c_driver adp5520_driver = {
 	.driver = {
-		.name	= "adp5520",
-		.pm	= &adp5520_pm,
+		.name			= "adp5520",
+		.pm			= &adp5520_pm,
+		.suppress_bind_attrs	= true,
 	},
 	.probe		= adp5520_probe,
-	.remove		= adp5520_remove,
 	.id_table	= adp5520_id,
 };
-
-module_i2c_driver(adp5520_driver);
-
-MODULE_AUTHOR("Michael Hennerich <michael.hennerich@analog.com>");
-MODULE_DESCRIPTION("ADP5520(01) PMIC-MFD Driver");
-MODULE_LICENSE("GPL");
+builtin_i2c_driver(adp5520_driver);

drivers/mfd/as3711.c

@@ -16,7 +16,6 @@
 #include <linux/kernel.h>
 #include <linux/mfd/as3711.h>
 #include <linux/mfd/core.h>
-#include <linux/module.h>
 #include <linux/of.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -118,7 +117,6 @@ static const struct of_device_id as3711_of_match[] = {
 	{.compatible = "ams,as3711",},
 	{}
 };
-MODULE_DEVICE_TABLE(of, as3711_of_match);
 #endif
 
 static int as3711_i2c_probe(struct i2c_client *client,
@@ -202,8 +200,6 @@ static const struct i2c_device_id as3711_i2c_id[] = {
 	{}
 };
 
-MODULE_DEVICE_TABLE(i2c, as3711_i2c_id);
-
 static struct i2c_driver as3711_i2c_driver = {
 	.driver = {
 		   .name = "as3711",
@@ -219,13 +215,3 @@ static int __init as3711_i2c_init(void)
 }
 /* Initialise early */
 subsys_initcall(as3711_i2c_init);
-
-static void __exit as3711_i2c_exit(void)
-{
-	i2c_del_driver(&as3711_i2c_driver);
-}
-module_exit(as3711_i2c_exit);
-
-MODULE_AUTHOR("Guennadi Liakhovetski <g.liakhovetski@gmx.de>");
-MODULE_DESCRIPTION("AS3711 PMIC driver");
-MODULE_LICENSE("GPL v2");

drivers/mfd/at91-usart.c

@@ -15,29 +15,29 @@
 #include <linux/of.h>
 #include <linux/property.h>
 
-static struct mfd_cell at91_usart_spi_subdev = {
-		.name = "at91_usart_spi",
-		.of_compatible = "microchip,at91sam9g45-usart-spi",
-	};
+static const struct mfd_cell at91_usart_spi_subdev = {
+	.name = "at91_usart_spi",
+	.of_compatible = "microchip,at91sam9g45-usart-spi",
+};
 
-static struct mfd_cell at91_usart_serial_subdev = {
-		.name = "atmel_usart_serial",
-		.of_compatible = "atmel,at91rm9200-usart-serial",
-	};
+static const struct mfd_cell at91_usart_serial_subdev = {
+	.name = "atmel_usart_serial",
+	.of_compatible = "atmel,at91rm9200-usart-serial",
+};
 
 static int at91_usart_mode_probe(struct platform_device *pdev)
 {
-	struct mfd_cell cell;
+	const struct mfd_cell *cell;
 	u32 opmode = AT91_USART_MODE_SERIAL;
 
 	device_property_read_u32(&pdev->dev, "atmel,usart-mode", &opmode);
 
 	switch (opmode) {
 	case AT91_USART_MODE_SPI:
-		cell = at91_usart_spi_subdev;
+		cell = &at91_usart_spi_subdev;
 		break;
 	case AT91_USART_MODE_SERIAL:
-		cell = at91_usart_serial_subdev;
+		cell = &at91_usart_serial_subdev;
 		break;
 	default:
 		dev_err(&pdev->dev, "atmel,usart-mode has an invalid value %u\n",
@@ -45,7 +45,7 @@ static int at91_usart_mode_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, &cell, 1,
+	return devm_mfd_add_devices(&pdev->dev, PLATFORM_DEVID_AUTO, cell, 1,
 			      NULL, 0, NULL);
 }
 

drivers/mfd/cros_ec.c

@@ -129,8 +129,8 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 		}
 	}
 
-	err = mfd_add_devices(ec_dev->dev, PLATFORM_DEVID_AUTO, &ec_cell, 1,
-			      NULL, ec_dev->irq, NULL);
+	err = devm_mfd_add_devices(ec_dev->dev, PLATFORM_DEVID_AUTO, &ec_cell,
+				   1, NULL, ec_dev->irq, NULL);
 	if (err) {
 		dev_err(dev,
 			"Failed to register Embedded Controller subdevice %d\n",
@@ -147,7 +147,7 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 		 * - the EC is responsive at init time (it is not true for a
 		 *   sensor hub.
 		 */
-		err = mfd_add_devices(ec_dev->dev, PLATFORM_DEVID_AUTO,
+		err = devm_mfd_add_devices(ec_dev->dev, PLATFORM_DEVID_AUTO,
 				      &ec_pd_cell, 1, NULL, ec_dev->irq, NULL);
 		if (err) {
 			dev_err(dev,
@@ -181,14 +181,6 @@ int cros_ec_register(struct cros_ec_device *ec_dev)
 }
 EXPORT_SYMBOL(cros_ec_register);
 
-int cros_ec_remove(struct cros_ec_device *ec_dev)
-{
-	mfd_remove_devices(ec_dev->dev);
-
-	return 0;
-}
-EXPORT_SYMBOL(cros_ec_remove);
-
 #ifdef CONFIG_PM_SLEEP
 int cros_ec_suspend(struct cros_ec_device *ec_dev)
 {

drivers/mfd/cros_ec_dev.c

@@ -21,6 +21,7 @@
 #include <linux/mfd/core.h>
 #include <linux/module.h>
 #include <linux/mod_devicetable.h>
+#include <linux/of_platform.h>
 #include <linux/platform_device.h>
 #include <linux/pm.h>
 #include <linux/slab.h>
@@ -34,17 +35,9 @@
 #define CROS_MAX_DEV 128
 static int ec_major;
 
-static const struct attribute_group *cros_ec_groups[] = {
-	&cros_ec_attr_group,
-	&cros_ec_lightbar_attr_group,
-	&cros_ec_vbc_attr_group,
-	NULL,
-};
-
 static struct class cros_class = {
 	.owner          = THIS_MODULE,
 	.name           = "chromeos",
-	.dev_groups     = cros_ec_groups,
 };
 
 /* Basic communication */
@@ -231,7 +224,7 @@ static long ec_device_ioctl_readmem(struct cros_ec_dev *ec, void __user *arg)
 	if (copy_to_user((void __user *)arg, &s_mem, sizeof(s_mem)))
 		return -EFAULT;
 
-	return 0;
+	return num;
 }
 
 static long ec_device_ioctl(struct file *filp, unsigned int cmd,
@@ -395,9 +388,20 @@ static const struct mfd_cell cros_usbpd_charger_cells[] = {
 	{ .name = "cros-usbpd-charger" }
 };
 
+static const struct mfd_cell cros_ec_platform_cells[] = {
+	{ .name = "cros-ec-debugfs" },
+	{ .name = "cros-ec-lightbar" },
+	{ .name = "cros-ec-sysfs" },
+};
+
+static const struct mfd_cell cros_ec_vbc_cells[] = {
+	{ .name = "cros-ec-vbc" }
+};
+
 static int ec_device_probe(struct platform_device *pdev)
 {
 	int retval = -ENOMEM;
+	struct device_node *node;
 	struct device *dev = &pdev->dev;
 	struct cros_ec_platform *ec_platform = dev_get_platdata(dev);
 	struct cros_ec_dev *ec = kzalloc(sizeof(*ec), GFP_KERNEL);
@@ -470,9 +474,6 @@ static int ec_device_probe(struct platform_device *pdev)
 				retval);
 	}
 
-	/* Take control of the lightbar from the EC. */
-	lb_manual_suspend_ctrl(ec, 1);
-
 	/* We can now add the sysfs class, we know which parameter to show */
 	retval = cdev_device_add(&ec->cdev, &ec->class_dev);
 	if (retval) {
@@ -480,8 +481,26 @@ static int ec_device_probe(struct platform_device *pdev)
 		goto failed;
 	}
 
-	if (cros_ec_debugfs_init(ec))
-		dev_warn(dev, "failed to create debugfs directory\n");
+	retval = mfd_add_devices(ec->dev, PLATFORM_DEVID_AUTO,
+				 cros_ec_platform_cells,
+				 ARRAY_SIZE(cros_ec_platform_cells),
+				 NULL, 0, NULL);
+	if (retval)
+		dev_warn(ec->dev,
+			 "failed to add cros-ec platform devices: %d\n",
+			 retval);
+
+	/* Check whether this EC instance has a VBC NVRAM */
+	node = ec->ec_dev->dev->of_node;
+	if (of_property_read_bool(node, "google,has-vbc-nvram")) {
+		retval = mfd_add_devices(ec->dev, PLATFORM_DEVID_AUTO,
+					 cros_ec_vbc_cells,
+					 ARRAY_SIZE(cros_ec_vbc_cells),
+					 NULL, 0, NULL);
+		if (retval)
+			dev_warn(ec->dev, "failed to add VBC devices: %d\n",
+				 retval);
+	}
 
 	return 0;
 
@@ -494,69 +513,25 @@ static int ec_device_remove(struct platform_device *pdev)
 {
 	struct cros_ec_dev *ec = dev_get_drvdata(&pdev->dev);
 
-	/* Let the EC take over the lightbar again. */
-	lb_manual_suspend_ctrl(ec, 0);
-
-	cros_ec_debugfs_remove(ec);
-
 	mfd_remove_devices(ec->dev);
 	cdev_del(&ec->cdev);
 	device_unregister(&ec->class_dev);
 	return 0;
 }
 
-static void ec_device_shutdown(struct platform_device *pdev)
-{
-	struct cros_ec_dev *ec = dev_get_drvdata(&pdev->dev);
-
-	/* Be sure to clear up debugfs delayed works */
-	cros_ec_debugfs_remove(ec);
-}
-
 static const struct platform_device_id cros_ec_id[] = {
 	{ DRV_NAME, 0 },
 	{ /* sentinel */ }
 };
 MODULE_DEVICE_TABLE(platform, cros_ec_id);
 
-static __maybe_unused int ec_device_suspend(struct device *dev)
-{
-	struct cros_ec_dev *ec = dev_get_drvdata(dev);
-
-	cros_ec_debugfs_suspend(ec);
-
-	lb_suspend(ec);
-
-	return 0;
-}
-
-static __maybe_unused int ec_device_resume(struct device *dev)
-{
-	struct cros_ec_dev *ec = dev_get_drvdata(dev);
-
-	cros_ec_debugfs_resume(ec);
-
-	lb_resume(ec);
-
-	return 0;
-}
-
-static const struct dev_pm_ops cros_ec_dev_pm_ops = {
-#ifdef CONFIG_PM_SLEEP
-	.suspend = ec_device_suspend,
-	.resume = ec_device_resume,
-#endif
-};
-
 static struct platform_driver cros_ec_dev_driver = {
 	.driver = {
 		.name = DRV_NAME,
-		.pm = &cros_ec_dev_pm_ops,
 	},
 	.id_table = cros_ec_id,
 	.probe = ec_device_probe,
 	.remove = ec_device_remove,
-	.shutdown = ec_device_shutdown,
 };
 
 static int __init cros_ec_dev_init(void)

drivers/mfd/cros_ec_dev.h

@@ -44,10 +44,4 @@ struct cros_ec_readmem {
 #define CROS_EC_DEV_IOCXCMD   _IOWR(CROS_EC_DEV_IOC, 0, struct cros_ec_command)
 #define CROS_EC_DEV_IOCRDMEM  _IOWR(CROS_EC_DEV_IOC, 1, struct cros_ec_readmem)
 
-/* Lightbar utilities */
-extern bool ec_has_lightbar(struct cros_ec_dev *ec);
-extern int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable);
-extern int lb_suspend(struct cros_ec_dev *ec);
-extern int lb_resume(struct cros_ec_dev *ec);
-
 #endif /* _CROS_EC_DEV_H_ */

drivers/mfd/db8500-prcmu.c

 /*
+ * DB8500 PRCM Unit driver
+ *
  * Copyright (C) STMicroelectronics 2009
  * Copyright (C) ST-Ericsson SA 2010
  *
@@ -10,7 +12,8 @@
  * U8500 PRCM Unit interface driver
  *
  */
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/kernel.h>
 #include <linux/delay.h>
 #include <linux/errno.h>
@@ -3188,9 +3191,4 @@ static int __init db8500_prcmu_init(void)
 {
 	return platform_driver_register(&db8500_prcmu_driver);
 }
-
 core_initcall(db8500_prcmu_init);
-
-MODULE_AUTHOR("Mattias Nilsson <mattias.i.nilsson@stericsson.com>");
-MODULE_DESCRIPTION("DB8500 PRCM Unit driver");
-MODULE_LICENSE("GPL v2");

drivers/mfd/htc-i2cpld.c

@@ -27,7 +27,6 @@
 
 #include <linux/kernel.h>
 #include <linux/init.h>
-#include <linux/module.h>
 #include <linux/interrupt.h>
 #include <linux/platform_device.h>
 #include <linux/i2c.h>
@@ -614,8 +613,6 @@ static const struct i2c_device_id htcpld_chip_id[] = {
 	{ "htcpld-chip", 0 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
-
 
 static struct i2c_driver htcpld_chip_driver = {
 	.driver = {
@@ -643,17 +640,4 @@ static int __init htcpld_core_init(void)
 	/* Probe for our chips */
 	return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
 }
-
-static void __exit htcpld_core_exit(void)
-{
-	i2c_del_driver(&htcpld_chip_driver);
-	platform_driver_unregister(&htcpld_core_driver);
-}
-
-module_init(htcpld_core_init);
-module_exit(htcpld_core_exit);
-
-MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
-MODULE_DESCRIPTION("I2C HTC PLD Driver");
-MODULE_LICENSE("GPL");
-
+device_initcall(htcpld_core_init);

drivers/mfd/intel-lpss-acpi.c

@@ -15,7 +15,6 @@
 #include <linux/ioport.h>
 #include <linux/kernel.h>
 #include <linux/module.h>
-#include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/platform_device.h>
 #include <linux/property.h>

drivers/mfd/intel-lpss-pci.c

@@ -15,7 +15,6 @@
 #include <linux/kernel.h>
 #include <linux/module.h>
 #include <linux/pci.h>
-#include <linux/pm.h>
 #include <linux/pm_runtime.h>
 #include <linux/property.h>
 

drivers/mfd/intel-lpss.h

@@ -14,6 +14,8 @@
 #ifndef __MFD_INTEL_LPSS_H
 #define __MFD_INTEL_LPSS_H
 
+#include <linux/pm.h>
+
 struct device;
 struct resource;
 struct property_entry;

drivers/mfd/max8925-core.c

@@ -10,7 +10,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/irq.h>
 #include <linux/interrupt.h>
@@ -919,8 +919,3 @@ void max8925_device_exit(struct max8925_chip *chip)
 		free_irq(chip->tsc_irq, chip);
 	mfd_remove_devices(chip->dev);
 }
-
-
-MODULE_DESCRIPTION("PMIC Driver for Maxim MAX8925");
-MODULE_AUTHOR("Haojian Zhuang <haojian.zhuang@marvell.com");
-MODULE_LICENSE("GPL");

drivers/mfd/mxs-lradc.c

@@ -181,7 +181,7 @@ static int mxs_lradc_probe(struct platform_device *pdev)
 					MXS_LRADC_TOUCHSCREEN_5WIRE;
 				break;
 			}
-			/* fall through to an error message for i.MX23 */
+			/* fall through - to an error message for i.MX23 */
 		default:
 			dev_err(&pdev->dev,
 				"Unsupported number of touchscreen wires (%d)\n"

drivers/mfd/rc5t583.c

@@ -23,7 +23,6 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -298,8 +297,6 @@ static const struct i2c_device_id rc5t583_i2c_id[] = {
 	{}
 };
 
-MODULE_DEVICE_TABLE(i2c, rc5t583_i2c_id);
-
 static struct i2c_driver rc5t583_i2c_driver = {
 	.driver = {
 		   .name = "rc5t583",
@@ -313,14 +310,3 @@ static int __init rc5t583_i2c_init(void)
 	return i2c_add_driver(&rc5t583_i2c_driver);
 }
 subsys_initcall(rc5t583_i2c_init);
-
-static void __exit rc5t583_i2c_exit(void)
-{
-	i2c_del_driver(&rc5t583_i2c_driver);
-}
-
-module_exit(rc5t583_i2c_exit);
-
-MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
-MODULE_DESCRIPTION("RICOH RC5T583 power management system device driver");
-MODULE_LICENSE("GPL v2");

drivers/mfd/sec-core.c

@@ -114,7 +114,8 @@ static const struct mfd_cell s2mpu02_devs[] = {
 
 #ifdef CONFIG_OF
 static const struct of_device_id sec_dt_match[] = {
-	{	.compatible = "samsung,s5m8767-pmic",
+	{
+		.compatible = "samsung,s5m8767-pmic",
 		.data = (void *)S5M8767X,
 	}, {
 		.compatible = "samsung,s2mps11-pmic",
@@ -309,8 +310,8 @@ static void sec_pmic_configure(struct sec_pmic_dev *sec_pmic)
  * the sub-modules need not instantiate another instance while parsing their
  * platform data.
  */
-static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
-					struct device *dev)
+static struct sec_platform_data *
+sec_pmic_i2c_parse_dt_pdata(struct device *dev)
 {
 	struct sec_platform_data *pd;
 
@@ -331,8 +332,8 @@ static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
 	return pd;
 }
 #else
-static struct sec_platform_data *sec_pmic_i2c_parse_dt_pdata(
-					struct device *dev)
+static struct sec_platform_data *
+sec_pmic_i2c_parse_dt_pdata(struct device *dev)
 {
 	return NULL;
 }
@@ -471,8 +472,9 @@ static int sec_pmic_probe(struct i2c_client *i2c,
 		num_sec_devs = ARRAY_SIZE(s2mpu02_devs);
 		break;
 	default:
-		/* If this happens the probe function is problem */
-		BUG();
+		dev_err(&i2c->dev, "Unsupported device type (%lu)\n",
+			sec_pmic->device_type);
+		return -ENODEV;
 	}
 	ret = devm_mfd_add_devices(sec_pmic->dev, -1, sec_devs, num_sec_devs,
 				   NULL, 0, NULL);

drivers/mfd/sm501.c

@@ -1142,9 +1142,11 @@ static int sm501_register_gpio_i2c_instance(struct sm501_devdata *sm,
 		return -ENOMEM;
 
 	/* Create a gpiod lookup using gpiochip-local offsets */
-	lookup = devm_kzalloc(&pdev->dev,
-			      sizeof(*lookup) + 3 * sizeof(struct gpiod_lookup),
+	lookup = devm_kzalloc(&pdev->dev, struct_size(lookup, table, 3),
 			      GFP_KERNEL);
+	if (!lookup)
+		return -ENOMEM;
+
 	lookup->dev_id = "i2c-gpio";
 	if (iic->pin_sda < 32)
 		lookup->table[0].chip_label = "SM501-LOW";

drivers/mfd/sta2x11-mfd.c

 /*
+ * STA2x11 mfd for GPIO, SCTL and APBREG
+ *
  * Copyright (c) 2009-2011 Wind River Systems, Inc.
  * Copyright (c) 2011 ST Microelectronics (Alessandro Rubini, Davide Ciminaghi)
  *
@@ -18,7 +20,8 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/spinlock.h>
 #include <linux/errno.h>
 #include <linux/device.h>
@@ -653,8 +656,3 @@ static int __init sta2x11_mfd_init(void)
  */
 subsys_initcall(sta2x11_drivers_init);
 rootfs_initcall(sta2x11_mfd_init);
-
-MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Wind River");
-MODULE_DESCRIPTION("STA2x11 mfd for GPIO, SCTL and APBREG");
-MODULE_DEVICE_TABLE(pci, sta2x11_mfd_tbl);

drivers/mfd/stmpe.c

@@ -463,6 +463,28 @@ static const struct mfd_cell stmpe_ts_cell = {
 	.num_resources	= ARRAY_SIZE(stmpe_ts_resources),
 };
 
+/*
+ * ADC (STMPE811)
+ */
+
+static struct resource stmpe_adc_resources[] = {
+	{
+		.name	= "STMPE_TEMP_SENS",
+		.flags	= IORESOURCE_IRQ,
+	},
+	{
+		.name	= "STMPE_ADC",
+		.flags	= IORESOURCE_IRQ,
+	},
+};
+
+static const struct mfd_cell stmpe_adc_cell = {
+	.name		= "stmpe-adc",
+	.of_compatible	= "st,stmpe-adc",
+	.resources	= stmpe_adc_resources,
+	.num_resources	= ARRAY_SIZE(stmpe_adc_resources),
+};
+
 /*
  * STMPE811 or STMPE610
  */
@@ -497,6 +519,11 @@ static struct stmpe_variant_block stmpe811_blocks[] = {
 		.irq	= STMPE811_IRQ_TOUCH_DET,
 		.block	= STMPE_BLOCK_TOUCHSCREEN,
 	},
+	{
+		.cell	= &stmpe_adc_cell,
+		.irq	= STMPE811_IRQ_TEMP_SENS,
+		.block	= STMPE_BLOCK_ADC,
+	},
 };
 
 static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
@@ -517,6 +544,35 @@ static int stmpe811_enable(struct stmpe *stmpe, unsigned int blocks,
 				enable ? 0 : mask);
 }
 
+int stmpe811_adc_common_init(struct stmpe *stmpe)
+{
+	int ret;
+	u8 adc_ctrl1, adc_ctrl1_mask;
+
+	adc_ctrl1 = STMPE_SAMPLE_TIME(stmpe->sample_time) |
+		    STMPE_MOD_12B(stmpe->mod_12b) |
+		    STMPE_REF_SEL(stmpe->ref_sel);
+	adc_ctrl1_mask = STMPE_SAMPLE_TIME(0xff) | STMPE_MOD_12B(0xff) |
+			 STMPE_REF_SEL(0xff);
+
+	ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL1,
+			adc_ctrl1_mask, adc_ctrl1);
+	if (ret) {
+		dev_err(stmpe->dev, "Could not setup ADC\n");
+		return ret;
+	}
+
+	ret = stmpe_set_bits(stmpe, STMPE811_REG_ADC_CTRL2,
+			STMPE_ADC_FREQ(0xff), STMPE_ADC_FREQ(stmpe->adc_freq));
+	if (ret) {
+		dev_err(stmpe->dev, "Could not setup ADC\n");
+		return ret;
+	}
+
+	return 0;
+}
+EXPORT_SYMBOL_GPL(stmpe811_adc_common_init);
+
 static int stmpe811_get_altfunc(struct stmpe *stmpe, enum stmpe_block block)
 {
 	/* 0 for touchscreen, 1 for GPIO */
@@ -1325,6 +1381,7 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
 	struct device_node *np = ci->dev->of_node;
 	struct stmpe *stmpe;
 	int ret;
+	u32 val;
 
 	pdata = devm_kzalloc(ci->dev, sizeof(*pdata), GFP_KERNEL);
 	if (!pdata)
@@ -1342,6 +1399,15 @@ int stmpe_probe(struct stmpe_client_info *ci, enum stmpe_partnum partnum)
 	mutex_init(&stmpe->irq_lock);
 	mutex_init(&stmpe->lock);
 
+	if (!of_property_read_u32(np, "st,sample-time", &val))
+		stmpe->sample_time = val;
+	if (!of_property_read_u32(np, "st,mod-12b", &val))
+		stmpe->mod_12b = val;
+	if (!of_property_read_u32(np, "st,ref-sel", &val))
+		stmpe->ref_sel = val;
+	if (!of_property_read_u32(np, "st,adc-freq", &val))
+		stmpe->adc_freq = val;
+
 	stmpe->dev = ci->dev;
 	stmpe->client = ci->client;
 	stmpe->pdata = pdata;
@@ -1433,6 +1499,8 @@ int stmpe_remove(struct stmpe *stmpe)
 	if (!IS_ERR(stmpe->vcc))
 		regulator_disable(stmpe->vcc);
 
+	__stmpe_disable(stmpe, STMPE_BLOCK_ADC);
+
 	mfd_remove_devices(stmpe->dev);
 
 	return 0;

drivers/mfd/stpmic1.c

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com>
+
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_irq.h>
+#include <linux/of_platform.h>
+#include <linux/pm_wakeirq.h>
+#include <linux/regmap.h>
+
+#include <dt-bindings/mfd/st,stpmic1.h>
+
+#define STPMIC1_MAIN_IRQ 0
+
+static const struct regmap_range stpmic1_readable_ranges[] = {
+	regmap_reg_range(TURN_ON_SR, VERSION_SR),
+	regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
+	regmap_reg_range(BST_SW_CR, BST_SW_CR),
+	regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
+	regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
+	regmap_reg_range(INT_MASK_R1, INT_MASK_R4),
+	regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
+	regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
+	regmap_reg_range(INT_SRC_R1, INT_SRC_R1),
+};
+
+static const struct regmap_range stpmic1_writeable_ranges[] = {
+	regmap_reg_range(SWOFF_PWRCTRL_CR, LDO6_STDBY_CR),
+	regmap_reg_range(BST_SW_CR, BST_SW_CR),
+	regmap_reg_range(INT_CLEAR_R1, INT_CLEAR_R4),
+	regmap_reg_range(INT_SET_MASK_R1, INT_SET_MASK_R4),
+	regmap_reg_range(INT_CLEAR_MASK_R1, INT_CLEAR_MASK_R4),
+};
+
+static const struct regmap_range stpmic1_volatile_ranges[] = {
+	regmap_reg_range(TURN_ON_SR, VERSION_SR),
+	regmap_reg_range(WCHDG_CR, WCHDG_CR),
+	regmap_reg_range(INT_PENDING_R1, INT_PENDING_R4),
+	regmap_reg_range(INT_SRC_R1, INT_SRC_R4),
+};
+
+static const struct regmap_access_table stpmic1_readable_table = {
+	.yes_ranges = stpmic1_readable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(stpmic1_readable_ranges),
+};
+
+static const struct regmap_access_table stpmic1_writeable_table = {
+	.yes_ranges = stpmic1_writeable_ranges,
+	.n_yes_ranges = ARRAY_SIZE(stpmic1_writeable_ranges),
+};
+
+static const struct regmap_access_table stpmic1_volatile_table = {
+	.yes_ranges = stpmic1_volatile_ranges,
+	.n_yes_ranges = ARRAY_SIZE(stpmic1_volatile_ranges),
+};
+
+const struct regmap_config stpmic1_regmap_config = {
+	.reg_bits = 8,
+	.val_bits = 8,
+	.cache_type = REGCACHE_RBTREE,
+	.max_register = PMIC_MAX_REGISTER_ADDRESS,
+	.rd_table = &stpmic1_readable_table,
+	.wr_table = &stpmic1_writeable_table,
+	.volatile_table = &stpmic1_volatile_table,
+};
+
+static const struct regmap_irq stpmic1_irqs[] = {
+	REGMAP_IRQ_REG(IT_PONKEY_F, 0, 0x01),
+	REGMAP_IRQ_REG(IT_PONKEY_R, 0, 0x02),
+	REGMAP_IRQ_REG(IT_WAKEUP_F, 0, 0x04),
+	REGMAP_IRQ_REG(IT_WAKEUP_R, 0, 0x08),
+	REGMAP_IRQ_REG(IT_VBUS_OTG_F, 0, 0x10),
+	REGMAP_IRQ_REG(IT_VBUS_OTG_R, 0, 0x20),
+	REGMAP_IRQ_REG(IT_SWOUT_F, 0, 0x40),
+	REGMAP_IRQ_REG(IT_SWOUT_R, 0, 0x80),
+
+	REGMAP_IRQ_REG(IT_CURLIM_BUCK1, 1, 0x01),
+	REGMAP_IRQ_REG(IT_CURLIM_BUCK2, 1, 0x02),
+	REGMAP_IRQ_REG(IT_CURLIM_BUCK3, 1, 0x04),
+	REGMAP_IRQ_REG(IT_CURLIM_BUCK4, 1, 0x08),
+	REGMAP_IRQ_REG(IT_OCP_OTG, 1, 0x10),
+	REGMAP_IRQ_REG(IT_OCP_SWOUT, 1, 0x20),
+	REGMAP_IRQ_REG(IT_OCP_BOOST, 1, 0x40),
+	REGMAP_IRQ_REG(IT_OVP_BOOST, 1, 0x80),
+
+	REGMAP_IRQ_REG(IT_CURLIM_LDO1, 2, 0x01),
+	REGMAP_IRQ_REG(IT_CURLIM_LDO2, 2, 0x02),
+	REGMAP_IRQ_REG(IT_CURLIM_LDO3, 2, 0x04),
+	REGMAP_IRQ_REG(IT_CURLIM_LDO4, 2, 0x08),
+	REGMAP_IRQ_REG(IT_CURLIM_LDO5, 2, 0x10),
+	REGMAP_IRQ_REG(IT_CURLIM_LDO6, 2, 0x20),
+	REGMAP_IRQ_REG(IT_SHORT_SWOTG, 2, 0x40),
+	REGMAP_IRQ_REG(IT_SHORT_SWOUT, 2, 0x80),
+
+	REGMAP_IRQ_REG(IT_TWARN_F, 3, 0x01),
+	REGMAP_IRQ_REG(IT_TWARN_R, 3, 0x02),
+	REGMAP_IRQ_REG(IT_VINLOW_F, 3, 0x04),
+	REGMAP_IRQ_REG(IT_VINLOW_R, 3, 0x08),
+	REGMAP_IRQ_REG(IT_SWIN_F, 3, 0x40),
+	REGMAP_IRQ_REG(IT_SWIN_R, 3, 0x80),
+};
+
+static const struct regmap_irq_chip stpmic1_regmap_irq_chip = {
+	.name = "pmic_irq",
+	.status_base = INT_PENDING_R1,
+	.mask_base = INT_CLEAR_MASK_R1,
+	.unmask_base = INT_SET_MASK_R1,
+	.ack_base = INT_CLEAR_R1,
+	.num_regs = STPMIC1_PMIC_NUM_IRQ_REGS,
+	.irqs = stpmic1_irqs,
+	.num_irqs = ARRAY_SIZE(stpmic1_irqs),
+};
+
+static int stpmic1_probe(struct i2c_client *i2c,
+			 const struct i2c_device_id *id)
+{
+	struct stpmic1 *ddata;
+	struct device *dev = &i2c->dev;
+	int ret;
+	struct device_node *np = dev->of_node;
+	u32 reg;
+
+	ddata = devm_kzalloc(dev, sizeof(struct stpmic1), GFP_KERNEL);
+	if (!ddata)
+		return -ENOMEM;
+
+	i2c_set_clientdata(i2c, ddata);
+	ddata->dev = dev;
+
+	ddata->regmap = devm_regmap_init_i2c(i2c, &stpmic1_regmap_config);
+	if (IS_ERR(ddata->regmap))
+		return PTR_ERR(ddata->regmap);
+
+	ddata->irq = of_irq_get(np, STPMIC1_MAIN_IRQ);
+	if (ddata->irq < 0) {
+		dev_err(dev, "Failed to get main IRQ: %d\n", ddata->irq);
+		return ddata->irq;
+	}
+
+	ret = regmap_read(ddata->regmap, VERSION_SR, &reg);
+	if (ret) {
+		dev_err(dev, "Unable to read PMIC version\n");
+		return ret;
+	}
+	dev_info(dev, "PMIC Chip Version: 0x%x\n", reg);
+
+	/* Initialize PMIC IRQ Chip & associated IRQ domains */
+	ret = devm_regmap_add_irq_chip(dev, ddata->regmap, ddata->irq,
+				       IRQF_ONESHOT | IRQF_SHARED,
+				       0, &stpmic1_regmap_irq_chip,
+				       &ddata->irq_data);
+	if (ret) {
+		dev_err(dev, "IRQ Chip registration failed: %d\n", ret);
+		return ret;
+	}
+
+	return devm_of_platform_populate(dev);
+}
+
+#ifdef CONFIG_PM_SLEEP
+static int stpmic1_suspend(struct device *dev)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
+
+	disable_irq(pmic_dev->irq);
+
+	return 0;
+}
+
+static int stpmic1_resume(struct device *dev)
+{
+	struct i2c_client *i2c = to_i2c_client(dev);
+	struct stpmic1 *pmic_dev = i2c_get_clientdata(i2c);
+	int ret;
+
+	ret = regcache_sync(pmic_dev->regmap);
+	if (ret)
+		return ret;
+
+	enable_irq(pmic_dev->irq);
+
+	return 0;
+}
+#endif
+
+static SIMPLE_DEV_PM_OPS(stpmic1_pm, stpmic1_suspend, stpmic1_resume);
+
+static const struct of_device_id stpmic1_of_match[] = {
+	{ .compatible = "st,stpmic1", },
+	{},
+};
+MODULE_DEVICE_TABLE(of, stpmic1_of_match);
+
+static struct i2c_driver stpmic1_driver = {
+	.driver = {
+		.name = "stpmic1",
+		.of_match_table = of_match_ptr(stpmic1_of_match),
+		.pm = &stpmic1_pm,
+	},
+	.probe = stpmic1_probe,
+};
+
+module_i2c_driver(stpmic1_driver);
+
+MODULE_DESCRIPTION("STPMIC1 PMIC Driver");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");

drivers/mfd/syscon.c

@@ -15,7 +15,7 @@
 #include <linux/err.h>
 #include <linux/hwspinlock.h>
 #include <linux/io.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/list.h>
 #include <linux/of.h>
 #include <linux/of_address.h>
@@ -272,13 +272,3 @@ static int __init syscon_init(void)
 	return platform_driver_register(&syscon_driver);
 }
 postcore_initcall(syscon_init);
-
-static void __exit syscon_exit(void)
-{
-	platform_driver_unregister(&syscon_driver);
-}
-module_exit(syscon_exit);
-
-MODULE_AUTHOR("Dong Aisheng <dong.aisheng@linaro.org>");
-MODULE_DESCRIPTION("System Control driver");
-MODULE_LICENSE("GPL v2");

drivers/mfd/tps65090.c

@@ -2,7 +2,9 @@
  * Core driver for TI TPS65090 PMIC family
  *
  * Copyright (c) 2012, NVIDIA CORPORATION.  All rights reserved.
-
+ *
+ * Author: Venu Byravarasu <vbyravarasu@nvidia.com>
+ *
  * This program is free software; you can redistribute it and/or modify it
  * under the terms and conditions of the GNU General Public License,
  * version 2, as published by the Free Software Foundation.
@@ -19,7 +21,7 @@
 #include <linux/interrupt.h>
 #include <linux/irq.h>
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/mutex.h>
 #include <linux/slab.h>
 #include <linux/i2c.h>
@@ -171,7 +173,6 @@ static const struct of_device_id tps65090_of_match[] = {
 	{ .compatible = "ti,tps65090",},
 	{},
 };
-MODULE_DEVICE_TABLE(of, tps65090_of_match);
 #endif
 
 static int tps65090_i2c_probe(struct i2c_client *client,
@@ -236,30 +237,19 @@ static int tps65090_i2c_probe(struct i2c_client *client,
 	return ret;
 }
 
-static int tps65090_i2c_remove(struct i2c_client *client)
-{
-	struct tps65090 *tps65090 = i2c_get_clientdata(client);
-
-	mfd_remove_devices(tps65090->dev);
-	if (client->irq)
-		regmap_del_irq_chip(client->irq, tps65090->irq_data);
-
-	return 0;
-}
 
 static const struct i2c_device_id tps65090_id_table[] = {
 	{ "tps65090", 0 },
 	{ },
 };
-MODULE_DEVICE_TABLE(i2c, tps65090_id_table);
 
 static struct i2c_driver tps65090_driver = {
 	.driver	= {
 		.name	= "tps65090",
+		.suppress_bind_attrs = true,
 		.of_match_table = of_match_ptr(tps65090_of_match),
 	},
 	.probe		= tps65090_i2c_probe,
-	.remove		= tps65090_i2c_remove,
 	.id_table	= tps65090_id_table,
 };
 
@@ -268,13 +258,3 @@ static int __init tps65090_init(void)
 	return i2c_add_driver(&tps65090_driver);
 }
 subsys_initcall(tps65090_init);
-
-static void __exit tps65090_exit(void)
-{
-	i2c_del_driver(&tps65090_driver);
-}
-module_exit(tps65090_exit);
-
-MODULE_DESCRIPTION("TPS65090 core driver");
-MODULE_AUTHOR("Venu Byravarasu <vbyravarasu@nvidia.com>");
-MODULE_LICENSE("GPL v2");

drivers/mfd/tps65218.c

@@ -211,6 +211,83 @@ static const struct of_device_id of_tps65218_match_table[] = {
 };
 MODULE_DEVICE_TABLE(of, of_tps65218_match_table);
 
+static int tps65218_voltage_set_strict(struct tps65218 *tps)
+{
+	u32 strict;
+
+	if (of_property_read_u32(tps->dev->of_node,
+				 "ti,strict-supply-voltage-supervision",
+				 &strict))
+		return 0;
+
+	if (strict != 0 && strict != 1) {
+		dev_err(tps->dev,
+			"Invalid ti,strict-supply-voltage-supervision value\n");
+		return -EINVAL;
+	}
+
+	tps65218_update_bits(tps, TPS65218_REG_CONFIG1,
+			     TPS65218_CONFIG1_STRICT,
+			     strict ? TPS65218_CONFIG1_STRICT : 0,
+			     TPS65218_PROTECT_L1);
+	return 0;
+}
+
+static int tps65218_voltage_set_uv_hyst(struct tps65218 *tps)
+{
+	u32 hyst;
+
+	if (of_property_read_u32(tps->dev->of_node,
+				 "ti,under-voltage-hyst-microvolt", &hyst))
+		return 0;
+
+	if (hyst != 400000 && hyst != 200000) {
+		dev_err(tps->dev,
+			"Invalid ti,under-voltage-hyst-microvolt value\n");
+		return -EINVAL;
+	}
+
+	tps65218_update_bits(tps, TPS65218_REG_CONFIG2,
+			     TPS65218_CONFIG2_UVLOHYS,
+			     hyst == 400000 ? TPS65218_CONFIG2_UVLOHYS : 0,
+			     TPS65218_PROTECT_L1);
+	return 0;
+}
+
+static int tps65218_voltage_set_uvlo(struct tps65218 *tps)
+{
+	u32 uvlo;
+	int uvloval;
+
+	if (of_property_read_u32(tps->dev->of_node,
+				 "ti,under-voltage-limit-microvolt", &uvlo))
+		return 0;
+
+	switch (uvlo) {
+	case 2750000:
+		uvloval = TPS65218_CONFIG1_UVLO_2750000;
+		break;
+	case 2950000:
+		uvloval = TPS65218_CONFIG1_UVLO_2950000;
+		break;
+	case 3250000:
+		uvloval = TPS65218_CONFIG1_UVLO_3250000;
+		break;
+	case 3350000:
+		uvloval = TPS65218_CONFIG1_UVLO_3350000;
+		break;
+	default:
+		dev_err(tps->dev,
+			"Invalid ti,under-voltage-limit-microvolt value\n");
+		return -EINVAL;
+	}
+
+	tps65218_update_bits(tps, TPS65218_REG_CONFIG1,
+			     TPS65218_CONFIG1_UVLO_MASK, uvloval,
+			     TPS65218_PROTECT_L1);
+	return 0;
+}
+
 static int tps65218_probe(struct i2c_client *client,
 				const struct i2c_device_id *ids)
 {
@@ -249,6 +326,18 @@ static int tps65218_probe(struct i2c_client *client,
 
 	tps->rev = chipid & TPS65218_CHIPID_REV_MASK;
 
+	ret = tps65218_voltage_set_strict(tps);
+	if (ret)
+		return ret;
+
+	ret = tps65218_voltage_set_uvlo(tps);
+	if (ret)
+		return ret;
+
+	ret = tps65218_voltage_set_uv_hyst(tps);
+	if (ret)
+		return ret;
+
 	ret = mfd_add_devices(tps->dev, PLATFORM_DEVID_AUTO, tps65218_cells,
 			      ARRAY_SIZE(tps65218_cells), NULL, 0,
 			      regmap_irq_get_domain(tps->irq_data));

drivers/mfd/tps65910.c

 /*
- * tps65910.c  --  TI TPS6591x
+ * tps65910.c  --  TI TPS6591x chip family multi-function driver
  *
  * Copyright 2010 Texas Instruments Inc.
  *
@@ -13,8 +13,6 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/init.h>
 #include <linux/err.h>
 #include <linux/slab.h>
@@ -374,7 +372,6 @@ static const struct of_device_id tps65910_of_match[] = {
 	{ .compatible = "ti,tps65911", .data = (void *)TPS65911},
 	{ },
 };
-MODULE_DEVICE_TABLE(of, tps65910_of_match);
 
 static struct tps65910_board *tps65910_parse_dt(struct i2c_client *client,
 						unsigned long *chip_id)
@@ -527,8 +524,6 @@ static const struct i2c_device_id tps65910_i2c_id[] = {
        { "tps65911", TPS65911 },
        { }
 };
-MODULE_DEVICE_TABLE(i2c, tps65910_i2c_id);
-
 
 static struct i2c_driver tps65910_i2c_driver = {
 	.driver = {
@@ -545,14 +540,3 @@ static int __init tps65910_i2c_init(void)
 }
 /* init early so consumer devices can complete system boot */
 subsys_initcall(tps65910_i2c_init);
-
-static void __exit tps65910_i2c_exit(void)
-{
-	i2c_del_driver(&tps65910_i2c_driver);
-}
-module_exit(tps65910_i2c_exit);
-
-MODULE_AUTHOR("Graeme Gregory <gg@slimlogic.co.uk>");
-MODULE_AUTHOR("Jorge Eduardo Candelaria <jedu@slimlogic.co.uk>");
-MODULE_DESCRIPTION("TPS6591x chip family multi-function driver");
-MODULE_LICENSE("GPL");

drivers/mfd/tps68470.c

@@ -86,7 +86,6 @@ static const struct acpi_device_id tps68470_acpi_ids[] = {
 	{"INT3472"},
 	{},
 };
-MODULE_DEVICE_TABLE(acpi, tps68470_acpi_ids);
 
 static struct i2c_driver tps68470_driver = {
 	.driver = {

drivers/mfd/tps80031.c

@@ -30,7 +30,6 @@
 #include <linux/irq.h>
 #include <linux/mfd/core.h>
 #include <linux/mfd/tps80031.h>
-#include <linux/module.h>
 #include <linux/pm.h>
 #include <linux/regmap.h>
 #include <linux/slab.h>
@@ -516,40 +515,18 @@ static int tps80031_probe(struct i2c_client *client,
 	return ret;
 }
 
-static int tps80031_remove(struct i2c_client *client)
-{
-	struct tps80031 *tps80031 = i2c_get_clientdata(client);
-	int i;
-
-	if (tps80031_power_off_dev == tps80031) {
-		tps80031_power_off_dev = NULL;
-		pm_power_off = NULL;
-	}
-
-	mfd_remove_devices(tps80031->dev);
-
-	regmap_del_irq_chip(client->irq, tps80031->irq_data);
-
-	for (i = 0; i < TPS80031_NUM_SLAVES; i++) {
-		if (tps80031->clients[i] != client)
-			i2c_unregister_device(tps80031->clients[i]);
-	}
-	return 0;
-}
-
 static const struct i2c_device_id tps80031_id_table[] = {
 	{ "tps80031", TPS80031 },
 	{ "tps80032", TPS80032 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, tps80031_id_table);
 
 static struct i2c_driver tps80031_driver = {
 	.driver	= {
-		.name	= "tps80031",
+		.name			= "tps80031",
+		.suppress_bind_attrs	= true,
 	},
 	.probe		= tps80031_probe,
-	.remove		= tps80031_remove,
 	.id_table	= tps80031_id_table,
 };
 
@@ -558,13 +535,3 @@ static int __init tps80031_init(void)
 	return i2c_add_driver(&tps80031_driver);
 }
 subsys_initcall(tps80031_init);
-
-static void __exit tps80031_exit(void)
-{
-	i2c_del_driver(&tps80031_driver);
-}
-module_exit(tps80031_exit);
-
-MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
-MODULE_DESCRIPTION("TPS80031 core driver");
-MODULE_LICENSE("GPL v2");

drivers/mfd/tqmx86.c

+// SPDX-License-Identifier: GPL-2.0+
+/*
+ * TQ-Systems PLD MFD core driver, based on vendor driver by
+ * Vadim V.Vlasov <vvlasov@dev.rtsoft.ru>
+ *
+ * Copyright (c) 2015 TQ-Systems GmbH
+ * Copyright (c) 2019 Andrew Lunn <andrew@lunn.ch>
+ */
+
+#include <linux/delay.h>
+#include <linux/dmi.h>
+#include <linux/i2c.h>
+#include <linux/io.h>
+#include <linux/mfd/core.h>
+#include <linux/module.h>
+#include <linux/platform_data/i2c-ocores.h>
+#include <linux/platform_device.h>
+
+#define TQMX86_IOBASE	0x160
+#define TQMX86_IOSIZE	0x3f
+#define TQMX86_IOBASE_I2C	0x1a0
+#define TQMX86_IOSIZE_I2C	0xa
+#define TQMX86_IOBASE_WATCHDOG	0x18b
+#define TQMX86_IOSIZE_WATCHDOG	0x2
+#define TQMX86_IOBASE_GPIO	0x18d
+#define TQMX86_IOSIZE_GPIO	0x4
+
+#define TQMX86_REG_BOARD_ID	0x20
+#define TQMX86_REG_BOARD_ID_E38M	1
+#define TQMX86_REG_BOARD_ID_50UC	2
+#define TQMX86_REG_BOARD_ID_E38C	3
+#define TQMX86_REG_BOARD_ID_60EB	4
+#define TQMX86_REG_BOARD_ID_E39M	5
+#define TQMX86_REG_BOARD_ID_E39C	6
+#define TQMX86_REG_BOARD_ID_E39x	7
+#define TQMX86_REG_BOARD_ID_70EB	8
+#define TQMX86_REG_BOARD_ID_80UC	9
+#define TQMX86_REG_BOARD_ID_90UC	10
+#define TQMX86_REG_BOARD_REV	0x21
+#define TQMX86_REG_IO_EXT_INT	0x26
+#define TQMX86_REG_IO_EXT_INT_NONE		0
+#define TQMX86_REG_IO_EXT_INT_7			1
+#define TQMX86_REG_IO_EXT_INT_9			2
+#define TQMX86_REG_IO_EXT_INT_12		3
+#define TQMX86_REG_IO_EXT_INT_MASK		0x3
+#define TQMX86_REG_IO_EXT_INT_GPIO_SHIFT	4
+
+#define TQMX86_REG_I2C_DETECT	0x47
+#define TQMX86_REG_I2C_DETECT_SOFT		0xa5
+#define TQMX86_REG_I2C_INT_EN	0x49
+
+static uint gpio_irq;
+module_param(gpio_irq, uint, 0);
+MODULE_PARM_DESC(gpio_irq, "GPIO IRQ number (7, 9, 12)");
+
+static const struct resource tqmx_i2c_soft_resources[] = {
+	DEFINE_RES_IO(TQMX86_IOBASE_I2C, TQMX86_IOSIZE_I2C),
+};
+
+static const struct resource tqmx_watchdog_resources[] = {
+	DEFINE_RES_IO(TQMX86_IOBASE_WATCHDOG, TQMX86_IOSIZE_WATCHDOG),
+};
+
+/*
+ * The IRQ resource must be first, since it is updated with the
+ * configured IRQ in the probe function.
+ */
+static struct resource tqmx_gpio_resources[] = {
+	DEFINE_RES_IRQ(0),
+	DEFINE_RES_IO(TQMX86_IOBASE_GPIO, TQMX86_IOSIZE_GPIO),
+};
+
+static struct i2c_board_info tqmx86_i2c_devices[] = {
+	{
+		/* 4K EEPROM at 0x50 */
+		I2C_BOARD_INFO("24c32", 0x50),
+	},
+};
+
+static struct ocores_i2c_platform_data ocores_platfom_data = {
+	.num_devices = ARRAY_SIZE(tqmx86_i2c_devices),
+	.devices = tqmx86_i2c_devices,
+};
+
+static const struct mfd_cell tqmx86_i2c_soft_dev[] = {
+	{
+		.name = "ocores-i2c",
+		.platform_data = &ocores_platfom_data,
+		.pdata_size = sizeof(ocores_platfom_data),
+		.resources = tqmx_i2c_soft_resources,
+		.num_resources = ARRAY_SIZE(tqmx_i2c_soft_resources),
+	},
+};
+
+static const struct mfd_cell tqmx86_devs[] = {
+	{
+		.name = "tqmx86-wdt",
+		.resources = tqmx_watchdog_resources,
+		.num_resources = ARRAY_SIZE(tqmx_watchdog_resources),
+		.ignore_resource_conflicts = true,
+	},
+	{
+		.name = "tqmx86-gpio",
+		.resources = tqmx_gpio_resources,
+		.num_resources = ARRAY_SIZE(tqmx_gpio_resources),
+		.ignore_resource_conflicts = true,
+	},
+};
+
+static const char *tqmx86_board_id_to_name(u8 board_id)
+{
+	switch (board_id) {
+	case TQMX86_REG_BOARD_ID_E38M:
+		return "TQMxE38M";
+	case TQMX86_REG_BOARD_ID_50UC:
+		return "TQMx50UC";
+	case TQMX86_REG_BOARD_ID_E38C:
+		return "TQMxE38C";
+	case TQMX86_REG_BOARD_ID_60EB:
+		return "TQMx60EB";
+	case TQMX86_REG_BOARD_ID_E39M:
+		return "TQMxE39M";
+	case TQMX86_REG_BOARD_ID_E39C:
+		return "TQMxE39C";
+	case TQMX86_REG_BOARD_ID_E39x:
+		return "TQMxE39x";
+	case TQMX86_REG_BOARD_ID_70EB:
+		return "TQMx70EB";
+	case TQMX86_REG_BOARD_ID_80UC:
+		return "TQMx80UC";
+	case TQMX86_REG_BOARD_ID_90UC:
+		return "TQMx90UC";
+	default:
+		return "Unknown";
+	}
+}
+
+static int tqmx86_board_id_to_clk_rate(u8 board_id)
+{
+	switch (board_id) {
+	case TQMX86_REG_BOARD_ID_50UC:
+	case TQMX86_REG_BOARD_ID_60EB:
+	case TQMX86_REG_BOARD_ID_70EB:
+	case TQMX86_REG_BOARD_ID_80UC:
+	case TQMX86_REG_BOARD_ID_90UC:
+		return 24000;
+	case TQMX86_REG_BOARD_ID_E39M:
+	case TQMX86_REG_BOARD_ID_E39C:
+	case TQMX86_REG_BOARD_ID_E39x:
+		return 25000;
+	case TQMX86_REG_BOARD_ID_E38M:
+	case TQMX86_REG_BOARD_ID_E38C:
+		return 33000;
+	default:
+		return 0;
+	}
+}
+
+static int tqmx86_probe(struct platform_device *pdev)
+{
+	u8 board_id, rev, i2c_det, i2c_ien, io_ext_int_val;
+	struct device *dev = &pdev->dev;
+	u8 gpio_irq_cfg, readback;
+	const char *board_name;
+	void __iomem *io_base;
+	int err;
+
+	switch (gpio_irq) {
+	case 0:
+		gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_NONE;
+		break;
+	case 7:
+		gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_7;
+		break;
+	case 9:
+		gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_9;
+		break;
+	case 12:
+		gpio_irq_cfg = TQMX86_REG_IO_EXT_INT_12;
+		break;
+	default:
+		pr_err("tqmx86: Invalid GPIO IRQ (%d)\n", gpio_irq);
+		return -EINVAL;
+	}
+
+	io_base = devm_ioport_map(dev, TQMX86_IOBASE, TQMX86_IOSIZE);
+	if (!io_base)
+		return -ENOMEM;
+
+	board_id = ioread8(io_base + TQMX86_REG_BOARD_ID);
+	board_name = tqmx86_board_id_to_name(board_id);
+	rev = ioread8(io_base + TQMX86_REG_BOARD_REV);
+
+	dev_info(dev,
+		 "Found %s - Board ID %d, PCB Revision %d, PLD Revision %d\n",
+		 board_name, board_id, rev >> 4, rev & 0xf);
+
+	i2c_det = ioread8(io_base + TQMX86_REG_I2C_DETECT);
+	i2c_ien = ioread8(io_base + TQMX86_REG_I2C_INT_EN);
+
+	if (gpio_irq_cfg) {
+		io_ext_int_val =
+			gpio_irq_cfg << TQMX86_REG_IO_EXT_INT_GPIO_SHIFT;
+		iowrite8(io_ext_int_val, io_base + TQMX86_REG_IO_EXT_INT);
+		readback = ioread8(io_base + TQMX86_REG_IO_EXT_INT);
+		if (readback != io_ext_int_val) {
+			dev_warn(dev, "GPIO interrupts not supported.\n");
+			return -EINVAL;
+		}
+
+		/* Assumes the IRQ resource is first. */
+		tqmx_gpio_resources[0].start = gpio_irq;
+	}
+
+	ocores_platfom_data.clock_khz = tqmx86_board_id_to_clk_rate(board_id);
+
+	if (i2c_det == TQMX86_REG_I2C_DETECT_SOFT) {
+		err = devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+					   tqmx86_i2c_soft_dev,
+					   ARRAY_SIZE(tqmx86_i2c_soft_dev),
+					   NULL, 0, NULL);
+		if (err)
+			return err;
+	}
+
+	return devm_mfd_add_devices(dev, PLATFORM_DEVID_NONE,
+				    tqmx86_devs,
+				    ARRAY_SIZE(tqmx86_devs),
+				    NULL, 0, NULL);
+}
+
+static int tqmx86_create_platform_device(const struct dmi_system_id *id)
+{
+	struct platform_device *pdev;
+	int err;
+
+	pdev = platform_device_alloc("tqmx86", -1);
+	if (!pdev)
+		return -ENOMEM;
+
+	err = platform_device_add(pdev);
+	if (err)
+		platform_device_put(pdev);
+
+	return err;
+}
+
+static const struct dmi_system_id tqmx86_dmi_table[] __initconst = {
+	{
+		.ident = "TQMX86",
+		.matches = {
+			DMI_MATCH(DMI_SYS_VENDOR, "TQ-Group"),
+			DMI_MATCH(DMI_PRODUCT_NAME, "TQMx"),
+		},
+		.callback = tqmx86_create_platform_device,
+	},
+	{}
+};
+MODULE_DEVICE_TABLE(dmi, tqmx86_dmi_table);
+
+static struct platform_driver tqmx86_driver = {
+	.driver		= {
+		.name	= "tqmx86",
+	},
+	.probe		= tqmx86_probe,
+};
+
+static int __init tqmx86_init(void)
+{
+	if (!dmi_check_system(tqmx86_dmi_table))
+		return -ENODEV;
+
+	return platform_driver_register(&tqmx86_driver);
+}
+
+module_init(tqmx86_init);
+
+MODULE_DESCRIPTION("TQx86 PLD Core Driver");
+MODULE_AUTHOR("Andrew Lunn <andrew@lunn.ch>");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:tqmx86");

drivers/mfd/wm831x-core.c

@@ -13,7 +13,8 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/bcd.h>
 #include <linux/delay.h>
 #include <linux/mfd/core.h>
@@ -1892,14 +1893,6 @@ int wm831x_device_init(struct wm831x *wm831x, int irq)
 	return ret;
 }
 
-void wm831x_device_exit(struct wm831x *wm831x)
-{
-	wm831x_otp_exit(wm831x);
-	mfd_remove_devices(wm831x->dev);
-	free_irq(wm831x_irq(wm831x, WM831X_IRQ_AUXADC_DATA), wm831x);
-	wm831x_irq_exit(wm831x);
-}
-
 int wm831x_device_suspend(struct wm831x *wm831x)
 {
 	int reg, mask;
@@ -1944,7 +1937,3 @@ void wm831x_device_shutdown(struct wm831x *wm831x)
 	}
 }
 EXPORT_SYMBOL_GPL(wm831x_device_shutdown);
-
-MODULE_DESCRIPTION("Core support for the WM831X AudioPlus PMIC");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mark Brown");

drivers/mfd/wm831x-i2c.c

@@ -13,7 +13,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/i2c.h>
 #include <linux/delay.h>
 #include <linux/mfd/core.h>
@@ -68,15 +68,6 @@ static int wm831x_i2c_probe(struct i2c_client *i2c,
 	return wm831x_device_init(wm831x, i2c->irq);
 }
 
-static int wm831x_i2c_remove(struct i2c_client *i2c)
-{
-	struct wm831x *wm831x = i2c_get_clientdata(i2c);
-
-	wm831x_device_exit(wm831x);
-
-	return 0;
-}
-
 static int wm831x_i2c_suspend(struct device *dev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(dev);
@@ -103,7 +94,6 @@ static const struct i2c_device_id wm831x_i2c_id[] = {
 	{ "wm8326", WM8326 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, wm831x_i2c_id);
 
 static const struct dev_pm_ops wm831x_pm_ops = {
 	.suspend = wm831x_i2c_suspend,
@@ -115,9 +105,9 @@ static struct i2c_driver wm831x_i2c_driver = {
 		.name = "wm831x",
 		.pm = &wm831x_pm_ops,
 		.of_match_table = of_match_ptr(wm831x_of_match),
+		.suppress_bind_attrs = true,
 	},
 	.probe = wm831x_i2c_probe,
-	.remove = wm831x_i2c_remove,
 	.id_table = wm831x_i2c_id,
 };
 
@@ -132,9 +122,3 @@ static int __init wm831x_i2c_init(void)
 	return ret;
 }
 subsys_initcall(wm831x_i2c_init);
-
-static void __exit wm831x_i2c_exit(void)
-{
-	i2c_del_driver(&wm831x_i2c_driver);
-}
-module_exit(wm831x_i2c_exit);

drivers/mfd/wm831x-spi.c

@@ -13,7 +13,7 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/of.h>
 #include <linux/of_device.h>
 #include <linux/pm.h>
@@ -67,15 +67,6 @@ static int wm831x_spi_probe(struct spi_device *spi)
 	return wm831x_device_init(wm831x, spi->irq);
 }
 
-static int wm831x_spi_remove(struct spi_device *spi)
-{
-	struct wm831x *wm831x = spi_get_drvdata(spi);
-
-	wm831x_device_exit(wm831x);
-
-	return 0;
-}
-
 static int wm831x_spi_suspend(struct device *dev)
 {
 	struct wm831x *wm831x = dev_get_drvdata(dev);
@@ -108,17 +99,16 @@ static const struct spi_device_id wm831x_spi_ids[] = {
 	{ "wm8326", WM8326 },
 	{ },
 };
-MODULE_DEVICE_TABLE(spi, wm831x_spi_ids);
 
 static struct spi_driver wm831x_spi_driver = {
 	.driver = {
 		.name	= "wm831x",
 		.pm	= &wm831x_spi_pm,
 		.of_match_table = of_match_ptr(wm831x_of_match),
+		.suppress_bind_attrs = true,
 	},
 	.id_table	= wm831x_spi_ids,
 	.probe		= wm831x_spi_probe,
-	.remove		= wm831x_spi_remove,
 };
 
 static int __init wm831x_spi_init(void)
@@ -132,13 +122,3 @@ static int __init wm831x_spi_init(void)
 	return 0;
 }
 subsys_initcall(wm831x_spi_init);
-
-static void __exit wm831x_spi_exit(void)
-{
-	spi_unregister_driver(&wm831x_spi_driver);
-}
-module_exit(wm831x_spi_exit);
-
-MODULE_DESCRIPTION("SPI support for WM831x/2x AudioPlus PMICs");
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mark Brown");

drivers/mfd/wm8350-core.c

@@ -13,7 +13,8 @@
  */
 
 #include <linux/kernel.h>
-#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/export.h>
 #include <linux/slab.h>
 #include <linux/bug.h>
 #include <linux/device.h>
@@ -442,30 +443,3 @@ int wm8350_device_init(struct wm8350 *wm8350, int irq,
 	return ret;
 }
 EXPORT_SYMBOL_GPL(wm8350_device_init);
-
-void wm8350_device_exit(struct wm8350 *wm8350)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(wm8350->pmic.led); i++)
-		platform_device_unregister(wm8350->pmic.led[i].pdev);
-
-	for (i = 0; i < ARRAY_SIZE(wm8350->pmic.pdev); i++)
-		platform_device_unregister(wm8350->pmic.pdev[i]);
-
-	platform_device_unregister(wm8350->wdt.pdev);
-	platform_device_unregister(wm8350->rtc.pdev);
-	platform_device_unregister(wm8350->power.pdev);
-	platform_device_unregister(wm8350->hwmon.pdev);
-	platform_device_unregister(wm8350->gpio.pdev);
-	platform_device_unregister(wm8350->codec.pdev);
-
-	if (wm8350->irq_base)
-		free_irq(wm8350->irq_base + WM8350_IRQ_AUXADC_DATARDY, wm8350);
-
-	wm8350_irq_exit(wm8350);
-}
-EXPORT_SYMBOL_GPL(wm8350_device_exit);
-
-MODULE_DESCRIPTION("WM8350 AudioPlus PMIC core driver");
-MODULE_LICENSE("GPL");

drivers/mfd/wm8350-i2c.c

@@ -13,8 +13,6 @@
  *
  */
 
-#include <linux/module.h>
-#include <linux/moduleparam.h>
 #include <linux/err.h>
 #include <linux/init.h>
 #include <linux/i2c.h>
@@ -48,30 +46,19 @@ static int wm8350_i2c_probe(struct i2c_client *i2c,
 	return wm8350_device_init(wm8350, i2c->irq, pdata);
 }
 
-static int wm8350_i2c_remove(struct i2c_client *i2c)
-{
-	struct wm8350 *wm8350 = i2c_get_clientdata(i2c);
-
-	wm8350_device_exit(wm8350);
-
-	return 0;
-}
-
 static const struct i2c_device_id wm8350_i2c_id[] = {
 	{ "wm8350", 0 },
 	{ "wm8351", 0 },
 	{ "wm8352", 0 },
 	{ }
 };
-MODULE_DEVICE_TABLE(i2c, wm8350_i2c_id);
-
 
 static struct i2c_driver wm8350_i2c_driver = {
 	.driver = {
 		   .name = "wm8350",
+		   .suppress_bind_attrs = true,
 	},
 	.probe = wm8350_i2c_probe,
-	.remove = wm8350_i2c_remove,
 	.id_table = wm8350_i2c_id,
 };
 
@@ -81,12 +68,3 @@ static int __init wm8350_i2c_init(void)
 }
 /* init early so consumer devices can complete system boot */
 subsys_initcall(wm8350_i2c_init);
-
-static void __exit wm8350_i2c_exit(void)
-{
-	i2c_del_driver(&wm8350_i2c_driver);
-}
-module_exit(wm8350_i2c_exit);
-
-MODULE_DESCRIPTION("I2C support for the WM8350 AudioPlus PMIC");
-MODULE_LICENSE("GPL");

drivers/mfd/wm8400-core.c

@@ -12,7 +12,7 @@
  *
  */
 
-#include <linux/module.h>
+#include <linux/init.h>
 #include <linux/bug.h>
 #include <linux/err.h>
 #include <linux/i2c.h>
@@ -150,7 +150,6 @@ static const struct i2c_device_id wm8400_i2c_id[] = {
        { "wm8400", 0 },
        { }
 };
-MODULE_DEVICE_TABLE(i2c, wm8400_i2c_id);
 
 static struct i2c_driver wm8400_i2c_driver = {
 	.driver = {
@@ -161,7 +160,7 @@ static struct i2c_driver wm8400_i2c_driver = {
 };
 #endif
 
-static int __init wm8400_module_init(void)
+static int __init wm8400_driver_init(void)
 {
 	int ret = -ENODEV;
 
@@ -173,15 +172,4 @@ static int __init wm8400_module_init(void)
 
 	return ret;
 }
-subsys_initcall(wm8400_module_init);
-
-static void __exit wm8400_module_exit(void)
-{
-#if IS_ENABLED(CONFIG_I2C)
-	i2c_del_driver(&wm8400_i2c_driver);
-#endif
-}
-module_exit(wm8400_module_exit);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com>");
+subsys_initcall(wm8400_driver_init);

drivers/platform/chrome/Kconfig

@@ -49,9 +49,6 @@ config CHROMEOS_TBMC
 	  To compile this driver as a module, choose M here: the
 	  module will be called chromeos_tbmc.
 
-config CROS_EC_CTL
-        tristate
-
 config CROS_EC_I2C
 	tristate "ChromeOS Embedded Controller (I2C)"
 	depends on MFD_CROS_EC && I2C
@@ -111,4 +108,48 @@ config CROS_KBD_LED_BACKLIGHT
 	  To compile this driver as a module, choose M here: the
 	  module will be called cros_kbd_led_backlight.
 
+config CROS_EC_LIGHTBAR
+	tristate "Chromebook Pixel's lightbar support"
+	depends on MFD_CROS_EC_CHARDEV
+	default MFD_CROS_EC_CHARDEV
+	help
+	  This option exposes the Chromebook Pixel's lightbar to
+	  userspace.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_lightbar.
+
+config CROS_EC_VBC
+	tristate "ChromeOS EC vboot context support"
+	depends on MFD_CROS_EC_CHARDEV && OF
+	default MFD_CROS_EC_CHARDEV
+	help
+	  This option exposes the ChromeOS EC vboot context nvram to
+	  userspace.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_vbc.
+
+config CROS_EC_DEBUGFS
+	tristate "Export ChromeOS EC internals in DebugFS"
+	depends on MFD_CROS_EC_CHARDEV && DEBUG_FS
+	default MFD_CROS_EC_CHARDEV
+	help
+	  This option exposes the ChromeOS EC device internals to
+	  userspace.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_debugfs.
+
+config CROS_EC_SYSFS
+	tristate "ChromeOS EC control and information through sysfs"
+	depends on MFD_CROS_EC_CHARDEV && SYSFS
+	default MFD_CROS_EC_CHARDEV
+	help
+	  This option exposes some sysfs attributes to control and get
+	  information from ChromeOS EC.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called cros_ec_sysfs.
+
 endif # CHROMEOS_PLATFORMS

drivers/platform/chrome/Makefile

@@ -3,9 +3,6 @@
 obj-$(CONFIG_CHROMEOS_LAPTOP)		+= chromeos_laptop.o
 obj-$(CONFIG_CHROMEOS_PSTORE)		+= chromeos_pstore.o
 obj-$(CONFIG_CHROMEOS_TBMC)		+= chromeos_tbmc.o
-cros_ec_ctl-objs			:= cros_ec_sysfs.o cros_ec_lightbar.o \
-					   cros_ec_vbc.o cros_ec_debugfs.o
-obj-$(CONFIG_CROS_EC_CTL)		+= cros_ec_ctl.o
 obj-$(CONFIG_CROS_EC_I2C)		+= cros_ec_i2c.o
 obj-$(CONFIG_CROS_EC_SPI)		+= cros_ec_spi.o
 cros_ec_lpcs-objs			:= cros_ec_lpc.o cros_ec_lpc_reg.o
@@ -13,3 +10,7 @@ cros_ec_lpcs-$(CONFIG_CROS_EC_LPC_MEC)	+= cros_ec_lpc_mec.o
 obj-$(CONFIG_CROS_EC_LPC)		+= cros_ec_lpcs.o
 obj-$(CONFIG_CROS_EC_PROTO)		+= cros_ec_proto.o
 obj-$(CONFIG_CROS_KBD_LED_BACKLIGHT)	+= cros_kbd_led_backlight.o
+obj-$(CONFIG_CROS_EC_LIGHTBAR)		+= cros_ec_lightbar.o
+obj-$(CONFIG_CROS_EC_VBC)		+= cros_ec_vbc.o
+obj-$(CONFIG_CROS_EC_DEBUGFS)		+= cros_ec_debugfs.o
+obj-$(CONFIG_CROS_EC_SYSFS)		+= cros_ec_sysfs.o

drivers/platform/chrome/cros_ec_debugfs.c

@@ -23,12 +23,16 @@
 #include <linux/fs.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
 #include <linux/mutex.h>
+#include <linux/platform_device.h>
 #include <linux/poll.h>
 #include <linux/sched.h>
 #include <linux/slab.h>
 #include <linux/wait.h>
 
+#define DRV_NAME "cros-ec-debugfs"
+
 #define LOG_SHIFT		14
 #define LOG_SIZE		(1 << LOG_SHIFT)
 #define LOG_POLL_SEC		10
@@ -423,8 +427,9 @@ static int cros_ec_create_pdinfo(struct cros_ec_debugfs *debug_info)
 	return 0;
 }
 
-int cros_ec_debugfs_init(struct cros_ec_dev *ec)
+static int cros_ec_debugfs_probe(struct platform_device *pd)
 {
+	struct cros_ec_dev *ec = dev_get_drvdata(pd->dev.parent);
 	struct cros_ec_platform *ec_platform = dev_get_platdata(ec->dev);
 	const char *name = ec_platform->ec_name;
 	struct cros_ec_debugfs *debug_info;
@@ -453,40 +458,57 @@ int cros_ec_debugfs_init(struct cros_ec_dev *ec)
 
 	ec->debug_info = debug_info;
 
+	dev_set_drvdata(&pd->dev, ec);
+
 	return 0;
 
 remove_debugfs:
 	debugfs_remove_recursive(debug_info->dir);
 	return ret;
 }
-EXPORT_SYMBOL(cros_ec_debugfs_init);
 
-void cros_ec_debugfs_remove(struct cros_ec_dev *ec)
+static int cros_ec_debugfs_remove(struct platform_device *pd)
 {
-	if (!ec->debug_info)
-		return;
+	struct cros_ec_dev *ec = dev_get_drvdata(pd->dev.parent);
 
 	debugfs_remove_recursive(ec->debug_info->dir);
 	cros_ec_cleanup_console_log(ec->debug_info);
+
+	return 0;
 }
-EXPORT_SYMBOL(cros_ec_debugfs_remove);
 
-void cros_ec_debugfs_suspend(struct cros_ec_dev *ec)
+static int __maybe_unused cros_ec_debugfs_suspend(struct device *dev)
 {
-	/*
-	 * cros_ec_debugfs_init() failures are non-fatal; it's also possible
-	 * that we initted things but decided that console log wasn't supported.
-	 * We'll use the same set of checks that cros_ec_debugfs_remove() +
-	 * cros_ec_cleanup_console_log() end up using to handle those cases.
-	 */
-	if (ec->debug_info && ec->debug_info->log_buffer.buf)
-		cancel_delayed_work_sync(&ec->debug_info->log_poll_work);
+	struct cros_ec_dev *ec = dev_get_drvdata(dev);
+
+	cancel_delayed_work_sync(&ec->debug_info->log_poll_work);
+
+	return 0;
 }
-EXPORT_SYMBOL(cros_ec_debugfs_suspend);
 
-void cros_ec_debugfs_resume(struct cros_ec_dev *ec)
+static int __maybe_unused cros_ec_debugfs_resume(struct device *dev)
 {
-	if (ec->debug_info && ec->debug_info->log_buffer.buf)
-		schedule_delayed_work(&ec->debug_info->log_poll_work, 0);
+	struct cros_ec_dev *ec = dev_get_drvdata(dev);
+
+	schedule_delayed_work(&ec->debug_info->log_poll_work, 0);
+
+	return 0;
 }
-EXPORT_SYMBOL(cros_ec_debugfs_resume);
+
+static SIMPLE_DEV_PM_OPS(cros_ec_debugfs_pm_ops,
+			 cros_ec_debugfs_suspend, cros_ec_debugfs_resume);
+
+static struct platform_driver cros_ec_debugfs_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &cros_ec_debugfs_pm_ops,
+	},
+	.probe = cros_ec_debugfs_probe,
+	.remove = cros_ec_debugfs_remove,
+};
+
+module_platform_driver(cros_ec_debugfs_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Debug logs for ChromeOS EC");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/platform/chrome/cros_ec_i2c.c

@@ -317,15 +317,6 @@ static int cros_ec_i2c_probe(struct i2c_client *client,
 	return 0;
 }
 
-static int cros_ec_i2c_remove(struct i2c_client *client)
-{
-	struct cros_ec_device *ec_dev = i2c_get_clientdata(client);
-
-	cros_ec_remove(ec_dev);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int cros_ec_i2c_suspend(struct device *dev)
 {
@@ -376,7 +367,6 @@ static struct i2c_driver cros_ec_driver = {
 		.pm	= &cros_ec_i2c_pm_ops,
 	},
 	.probe		= cros_ec_i2c_probe,
-	.remove		= cros_ec_i2c_remove,
 	.id_table	= cros_ec_i2c_id,
 };
 

drivers/platform/chrome/cros_ec_lightbar.c

@@ -33,6 +33,8 @@
 #include <linux/uaccess.h>
 #include <linux/slab.h>
 
+#define DRV_NAME "cros-ec-lightbar"
+
 /* Rate-limit the lightbar interface to prevent DoS. */
 static unsigned long lb_interval_jiffies = 50 * HZ / 1000;
 
@@ -41,7 +43,6 @@ static unsigned long lb_interval_jiffies = 50 * HZ / 1000;
  * If this is true, we won't do anything during suspend/resume.
  */
 static bool userspace_control;
-static struct cros_ec_dev *ec_with_lightbar;
 
 static ssize_t interval_msec_show(struct device *dev,
 				  struct device_attribute *attr, char *buf)
@@ -373,15 +374,12 @@ static int lb_send_empty_cmd(struct cros_ec_dev *ec, uint8_t cmd)
 	return ret;
 }
 
-int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable)
+static int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable)
 {
 	struct ec_params_lightbar *param;
 	struct cros_ec_command *msg;
 	int ret;
 
-	if (ec != ec_with_lightbar)
-		return 0;
-
 	msg = alloc_lightbar_cmd_msg(ec);
 	if (!msg)
 		return -ENOMEM;
@@ -408,25 +406,6 @@ int lb_manual_suspend_ctrl(struct cros_ec_dev *ec, uint8_t enable)
 
 	return ret;
 }
-EXPORT_SYMBOL(lb_manual_suspend_ctrl);
-
-int lb_suspend(struct cros_ec_dev *ec)
-{
-	if (userspace_control || ec != ec_with_lightbar)
-		return 0;
-
-	return lb_send_empty_cmd(ec, LIGHTBAR_CMD_SUSPEND);
-}
-EXPORT_SYMBOL(lb_suspend);
-
-int lb_resume(struct cros_ec_dev *ec)
-{
-	if (userspace_control || ec != ec_with_lightbar)
-		return 0;
-
-	return lb_send_empty_cmd(ec, LIGHTBAR_CMD_RESUME);
-}
-EXPORT_SYMBOL(lb_resume);
 
 static ssize_t sequence_store(struct device *dev, struct device_attribute *attr,
 			      const char *buf, size_t count)
@@ -584,36 +563,91 @@ static struct attribute *__lb_cmds_attrs[] = {
 	NULL,
 };
 
-bool ec_has_lightbar(struct cros_ec_dev *ec)
+struct attribute_group cros_ec_lightbar_attr_group = {
+	.name = "lightbar",
+	.attrs = __lb_cmds_attrs,
+};
+
+static int cros_ec_lightbar_probe(struct platform_device *pd)
 {
-	return !!get_lightbar_version(ec, NULL, NULL);
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+	struct cros_ec_platform *pdata = dev_get_platdata(ec_dev->dev);
+	struct device *dev = &pd->dev;
+	int ret;
+
+	/*
+	 * Only instantiate the lightbar if the EC name is 'cros_ec'. Other EC
+	 * devices like 'cros_pd' doesn't have a lightbar.
+	 */
+	if (strcmp(pdata->ec_name, CROS_EC_DEV_NAME) != 0)
+		return -ENODEV;
+
+	/*
+	 * Ask then for the lightbar version, if it's 0 then the 'cros_ec'
+	 * doesn't have a lightbar.
+	 */
+	if (!get_lightbar_version(ec_dev, NULL, NULL))
+		return -ENODEV;
+
+	/* Take control of the lightbar from the EC. */
+	lb_manual_suspend_ctrl(ec_dev, 1);
+
+	ret = sysfs_create_group(&ec_dev->class_dev.kobj,
+				 &cros_ec_lightbar_attr_group);
+	if (ret < 0)
+		dev_err(dev, "failed to create %s attributes. err=%d\n",
+			cros_ec_lightbar_attr_group.name, ret);
+
+	return ret;
 }
 
-static umode_t cros_ec_lightbar_attrs_are_visible(struct kobject *kobj,
-						  struct attribute *a, int n)
+static int cros_ec_lightbar_remove(struct platform_device *pd)
 {
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
-	struct platform_device *pdev = to_platform_device(ec->dev);
-	struct cros_ec_platform *pdata = pdev->dev.platform_data;
-	int is_cros_ec;
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
 
-	is_cros_ec = strcmp(pdata->ec_name, CROS_EC_DEV_NAME);
+	sysfs_remove_group(&ec_dev->class_dev.kobj,
+			   &cros_ec_lightbar_attr_group);
 
-	if (is_cros_ec != 0)
-		return 0;
+	/* Let the EC take over the lightbar again. */
+	lb_manual_suspend_ctrl(ec_dev, 0);
 
-	/* Only instantiate this stuff if the EC has a lightbar */
-	if (ec_has_lightbar(ec)) {
-		ec_with_lightbar = ec;
-		return a->mode;
-	}
 	return 0;
 }
 
-struct attribute_group cros_ec_lightbar_attr_group = {
-	.name = "lightbar",
-	.attrs = __lb_cmds_attrs,
-	.is_visible = cros_ec_lightbar_attrs_are_visible,
+static int __maybe_unused cros_ec_lightbar_resume(struct device *dev)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(dev);
+
+	if (userspace_control)
+		return 0;
+
+	return lb_send_empty_cmd(ec_dev, LIGHTBAR_CMD_RESUME);
+}
+
+static int __maybe_unused cros_ec_lightbar_suspend(struct device *dev)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(dev);
+
+	if (userspace_control)
+		return 0;
+
+	return lb_send_empty_cmd(ec_dev, LIGHTBAR_CMD_SUSPEND);
+}
+
+static SIMPLE_DEV_PM_OPS(cros_ec_lightbar_pm_ops,
+			 cros_ec_lightbar_suspend, cros_ec_lightbar_resume);
+
+static struct platform_driver cros_ec_lightbar_driver = {
+	.driver = {
+		.name = DRV_NAME,
+		.pm = &cros_ec_lightbar_pm_ops,
+	},
+	.probe = cros_ec_lightbar_probe,
+	.remove = cros_ec_lightbar_remove,
 };
-EXPORT_SYMBOL(cros_ec_lightbar_attr_group);
+
+module_platform_driver(cros_ec_lightbar_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Expose the Chromebook Pixel's lightbar to userspace");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/platform/chrome/cros_ec_lpc.c

@@ -327,7 +327,6 @@ static int cros_ec_lpc_probe(struct platform_device *pdev)
 
 static int cros_ec_lpc_remove(struct platform_device *pdev)
 {
-	struct cros_ec_device *ec_dev;
 	struct acpi_device *adev;
 
 	adev = ACPI_COMPANION(&pdev->dev);
@@ -335,9 +334,6 @@ static int cros_ec_lpc_remove(struct platform_device *pdev)
 		acpi_remove_notify_handler(adev->handle, ACPI_ALL_NOTIFY,
 					   cros_ec_lpc_acpi_notify);
 
-	ec_dev = platform_get_drvdata(pdev);
-	cros_ec_remove(ec_dev);
-
 	return 0;
 }
 

drivers/platform/chrome/cros_ec_spi.c

@@ -685,16 +685,6 @@ static int cros_ec_spi_probe(struct spi_device *spi)
 	return 0;
 }
 
-static int cros_ec_spi_remove(struct spi_device *spi)
-{
-	struct cros_ec_device *ec_dev;
-
-	ec_dev = spi_get_drvdata(spi);
-	cros_ec_remove(ec_dev);
-
-	return 0;
-}
-
 #ifdef CONFIG_PM_SLEEP
 static int cros_ec_spi_suspend(struct device *dev)
 {
@@ -733,7 +723,6 @@ static struct spi_driver cros_ec_driver_spi = {
 		.pm	= &cros_ec_spi_pm_ops,
 	},
 	.probe		= cros_ec_spi_probe,
-	.remove		= cros_ec_spi_remove,
 	.id_table	= cros_ec_spi_id,
 };
 

drivers/platform/chrome/cros_ec_sysfs.c

@@ -34,6 +34,8 @@
 #include <linux/types.h>
 #include <linux/uaccess.h>
 
+#define DRV_NAME "cros-ec-sysfs"
+
 /* Accessor functions */
 
 static ssize_t reboot_show(struct device *dev,
@@ -353,7 +355,39 @@ struct attribute_group cros_ec_attr_group = {
 	.attrs = __ec_attrs,
 	.is_visible = cros_ec_ctrl_visible,
 };
-EXPORT_SYMBOL(cros_ec_attr_group);
+
+static int cros_ec_sysfs_probe(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+	struct device *dev = &pd->dev;
+	int ret;
+
+	ret = sysfs_create_group(&ec_dev->class_dev.kobj, &cros_ec_attr_group);
+	if (ret < 0)
+		dev_err(dev, "failed to create attributes. err=%d\n", ret);
+
+	return ret;
+}
+
+static int cros_ec_sysfs_remove(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+
+	sysfs_remove_group(&ec_dev->class_dev.kobj, &cros_ec_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver cros_ec_sysfs_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = cros_ec_sysfs_probe,
+	.remove = cros_ec_sysfs_remove,
+};
+
+module_platform_driver(cros_ec_sysfs_driver);
 
 MODULE_LICENSE("GPL");
 MODULE_DESCRIPTION("ChromeOS EC control driver");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/platform/chrome/cros_ec_vbc.c

@@ -22,8 +22,11 @@
 #include <linux/platform_device.h>
 #include <linux/mfd/cros_ec.h>
 #include <linux/mfd/cros_ec_commands.h>
+#include <linux/module.h>
 #include <linux/slab.h>
 
+#define DRV_NAME "cros-ec-vbc"
+
 static ssize_t vboot_context_read(struct file *filp, struct kobject *kobj,
 				  struct bin_attribute *att, char *buf,
 				  loff_t pos, size_t count)
@@ -105,21 +108,6 @@ static ssize_t vboot_context_write(struct file *filp, struct kobject *kobj,
 	return data_sz;
 }
 
-static umode_t cros_ec_vbc_is_visible(struct kobject *kobj,
-				      struct bin_attribute *a, int n)
-{
-	struct device *dev = container_of(kobj, struct device, kobj);
-	struct cros_ec_dev *ec = to_cros_ec_dev(dev);
-	struct device_node *np = ec->ec_dev->dev->of_node;
-
-	if (IS_ENABLED(CONFIG_OF) && np) {
-		if (of_property_read_bool(np, "google,has-vbc-nvram"))
-			return a->attr.mode;
-	}
-
-	return 0;
-}
-
 static BIN_ATTR_RW(vboot_context, 16);
 
 static struct bin_attribute *cros_ec_vbc_bin_attrs[] = {
@@ -130,6 +118,43 @@ static struct bin_attribute *cros_ec_vbc_bin_attrs[] = {
 struct attribute_group cros_ec_vbc_attr_group = {
 	.name = "vbc",
 	.bin_attrs = cros_ec_vbc_bin_attrs,
-	.is_bin_visible = cros_ec_vbc_is_visible,
 };
-EXPORT_SYMBOL(cros_ec_vbc_attr_group);
+
+static int cros_ec_vbc_probe(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+	struct device *dev = &pd->dev;
+	int ret;
+
+	ret = sysfs_create_group(&ec_dev->class_dev.kobj,
+				 &cros_ec_vbc_attr_group);
+	if (ret < 0)
+		dev_err(dev, "failed to create %s attributes. err=%d\n",
+			cros_ec_vbc_attr_group.name, ret);
+
+	return ret;
+}
+
+static int cros_ec_vbc_remove(struct platform_device *pd)
+{
+	struct cros_ec_dev *ec_dev = dev_get_drvdata(pd->dev.parent);
+
+	sysfs_remove_group(&ec_dev->class_dev.kobj,
+			   &cros_ec_vbc_attr_group);
+
+	return 0;
+}
+
+static struct platform_driver cros_ec_vbc_driver = {
+	.driver = {
+		.name = DRV_NAME,
+	},
+	.probe = cros_ec_vbc_probe,
+	.remove = cros_ec_vbc_remove,
+};
+
+module_platform_driver(cros_ec_vbc_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("Expose the vboot context nvram to userspace");
+MODULE_ALIAS("platform:" DRV_NAME);

drivers/watchdog/Kconfig

@@ -817,6 +817,18 @@ config STM32_WATCHDOG
 	  To compile this driver as a module, choose M here: the
 	  module will be called stm32_iwdg.
 
+config STPMIC1_WATCHDOG
+	tristate "STPMIC1 PMIC watchdog support"
+	depends on MFD_STPMIC1
+	select WATCHDOG_CORE
+	help
+	  Say Y here to include watchdog support embedded into STPMIC1 PMIC.
+	  If the watchdog timer expires, stpmic1 will shut down all its power
+	  supplies.
+
+	  To compile this driver as a module, choose M here: the
+	  module will be called spmic1_wdt.
+
 config UNIPHIER_WATCHDOG
 	tristate "UniPhier watchdog support"
 	depends on ARCH_UNIPHIER || COMPILE_TEST

drivers/watchdog/Makefile

@@ -220,3 +220,4 @@ obj-$(CONFIG_SOFT_WATCHDOG) += softdog.o
 obj-$(CONFIG_MENF21BMC_WATCHDOG) += menf21bmc_wdt.o
 obj-$(CONFIG_MENZ069_WATCHDOG) += menz69_wdt.o
 obj-$(CONFIG_RAVE_SP_WATCHDOG) += rave-sp-wdt.o
+obj-$(CONFIG_STPMIC1_WATCHDOG) += stpmic1_wdt.o

drivers/watchdog/stpmic1_wdt.c

+// SPDX-License-Identifier: GPL-2.0
+// Copyright (C) STMicroelectronics 2018
+// Author: Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+
+#include <linux/kernel.h>
+#include <linux/mfd/stpmic1.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/slab.h>
+#include <linux/watchdog.h>
+
+/* WATCHDOG CONTROL REGISTER bit */
+#define WDT_START		BIT(0)
+#define WDT_PING		BIT(1)
+#define WDT_START_MASK		BIT(0)
+#define WDT_PING_MASK		BIT(1)
+#define WDT_STOP		0
+
+#define PMIC_WDT_MIN_TIMEOUT 1
+#define PMIC_WDT_MAX_TIMEOUT 256
+#define PMIC_WDT_DEFAULT_TIMEOUT 30
+
+static bool nowayout = WATCHDOG_NOWAYOUT;
+module_param(nowayout, bool, 0);
+MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default="
+		 __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
+
+struct stpmic1_wdt {
+	struct stpmic1 *pmic;
+	struct watchdog_device wdtdev;
+};
+
+static int pmic_wdt_start(struct watchdog_device *wdd)
+{
+	struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	return regmap_update_bits(wdt->pmic->regmap,
+				  WCHDG_CR, WDT_START_MASK, WDT_START);
+}
+
+static int pmic_wdt_stop(struct watchdog_device *wdd)
+{
+	struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	return regmap_update_bits(wdt->pmic->regmap,
+				  WCHDG_CR, WDT_START_MASK, WDT_STOP);
+}
+
+static int pmic_wdt_ping(struct watchdog_device *wdd)
+{
+	struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	return regmap_update_bits(wdt->pmic->regmap,
+				  WCHDG_CR, WDT_PING_MASK, WDT_PING);
+}
+
+static int pmic_wdt_set_timeout(struct watchdog_device *wdd,
+				unsigned int timeout)
+{
+	struct stpmic1_wdt *wdt = watchdog_get_drvdata(wdd);
+
+	wdd->timeout = timeout;
+	/* timeout is equal to register value + 1 */
+	return regmap_write(wdt->pmic->regmap, WCHDG_TIMER_CR, timeout - 1);
+}
+
+static const struct watchdog_info pmic_watchdog_info = {
+	.options = WDIOF_SETTIMEOUT | WDIOF_KEEPALIVEPING | WDIOF_MAGICCLOSE,
+	.identity = "STPMIC1 PMIC Watchdog",
+};
+
+static const struct watchdog_ops pmic_watchdog_ops = {
+	.owner = THIS_MODULE,
+	.start = pmic_wdt_start,
+	.stop = pmic_wdt_stop,
+	.ping = pmic_wdt_ping,
+	.set_timeout = pmic_wdt_set_timeout,
+};
+
+static int pmic_wdt_probe(struct platform_device *pdev)
+{
+	int ret;
+	struct stpmic1 *pmic;
+	struct stpmic1_wdt *wdt;
+
+	if (!pdev->dev.parent)
+		return -EINVAL;
+
+	pmic = dev_get_drvdata(pdev->dev.parent);
+	if (!pmic)
+		return -EINVAL;
+
+	wdt = devm_kzalloc(&pdev->dev, sizeof(struct stpmic1_wdt), GFP_KERNEL);
+	if (!wdt)
+		return -ENOMEM;
+
+	wdt->pmic = pmic;
+
+	wdt->wdtdev.info = &pmic_watchdog_info;
+	wdt->wdtdev.ops = &pmic_watchdog_ops;
+	wdt->wdtdev.min_timeout = PMIC_WDT_MIN_TIMEOUT;
+	wdt->wdtdev.max_timeout = PMIC_WDT_MAX_TIMEOUT;
+	wdt->wdtdev.parent = &pdev->dev;
+
+	wdt->wdtdev.timeout = PMIC_WDT_DEFAULT_TIMEOUT;
+	watchdog_init_timeout(&wdt->wdtdev, 0, &pdev->dev);
+
+	watchdog_set_nowayout(&wdt->wdtdev, nowayout);
+	watchdog_set_drvdata(&wdt->wdtdev, wdt);
+
+	ret = devm_watchdog_register_device(&pdev->dev, &wdt->wdtdev);
+	if (ret)
+		return ret;
+
+	dev_dbg(wdt->pmic->dev, "PMIC Watchdog driver probed\n");
+	return 0;
+}
+
+static const struct of_device_id of_pmic_wdt_match[] = {
+	{ .compatible = "st,stpmic1-wdt" },
+	{ },
+};
+
+MODULE_DEVICE_TABLE(of, of_pmic_wdt_match);
+
+static struct platform_driver stpmic1_wdt_driver = {
+	.probe = pmic_wdt_probe,
+	.driver = {
+		.name = "stpmic1-wdt",
+		.of_match_table = of_pmic_wdt_match,
+	},
+};
+module_platform_driver(stpmic1_wdt_driver);
+
+MODULE_DESCRIPTION("Watchdog driver for STPMIC1 device");
+MODULE_AUTHOR("Pascal Paillet <p.paillet@st.com>");
+MODULE_LICENSE("GPL v2");

include/dt-bindings/clk/lochnagar.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree defines for Lochnagar clocking
+ *
+ * Copyright (c) 2017-2018 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#ifndef DT_BINDINGS_CLK_LOCHNAGAR_H
+#define DT_BINDINGS_CLK_LOCHNAGAR_H
+
+#define LOCHNAGAR_CDC_MCLK1		0
+#define LOCHNAGAR_CDC_MCLK2		1
+#define LOCHNAGAR_DSP_CLKIN		2
+#define LOCHNAGAR_GF_CLKOUT1		3
+#define LOCHNAGAR_GF_CLKOUT2		4
+#define LOCHNAGAR_PSIA1_MCLK		5
+#define LOCHNAGAR_PSIA2_MCLK		6
+#define LOCHNAGAR_SPDIF_MCLK		7
+#define LOCHNAGAR_ADAT_MCLK		8
+#define LOCHNAGAR_SOUNDCARD_MCLK	9
+#define LOCHNAGAR_SPDIF_CLKOUT		10
+
+#endif

include/dt-bindings/mfd/st,stpmic1.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) STMicroelectronics 2018 - All Rights Reserved
+ * Author: Philippe Peurichard <philippe.peurichard@st.com>,
+ * Pascal Paillet <p.paillet@st.com> for STMicroelectronics.
+ */
+
+#ifndef __DT_BINDINGS_STPMIC1_H__
+#define __DT_BINDINGS_STPMIC1_H__
+
+/* IRQ definitions */
+#define IT_PONKEY_F	0
+#define IT_PONKEY_R	1
+#define IT_WAKEUP_F	2
+#define IT_WAKEUP_R	3
+#define IT_VBUS_OTG_F	4
+#define IT_VBUS_OTG_R	5
+#define IT_SWOUT_F	6
+#define IT_SWOUT_R	7
+
+#define IT_CURLIM_BUCK1	8
+#define IT_CURLIM_BUCK2	9
+#define IT_CURLIM_BUCK3	10
+#define IT_CURLIM_BUCK4	11
+#define IT_OCP_OTG	12
+#define IT_OCP_SWOUT	13
+#define IT_OCP_BOOST	14
+#define IT_OVP_BOOST	15
+
+#define IT_CURLIM_LDO1	16
+#define IT_CURLIM_LDO2	17
+#define IT_CURLIM_LDO3	18
+#define IT_CURLIM_LDO4	19
+#define IT_CURLIM_LDO5	20
+#define IT_CURLIM_LDO6	21
+#define IT_SHORT_SWOTG	22
+#define IT_SHORT_SWOUT	23
+
+#define IT_TWARN_F	24
+#define IT_TWARN_R	25
+#define IT_VINLOW_F	26
+#define IT_VINLOW_R	27
+#define IT_SWIN_F	30
+#define IT_SWIN_R	31
+
+/* BUCK MODES definitions */
+#define STPMIC1_BUCK_MODE_NORMAL 0
+#define STPMIC1_BUCK_MODE_LP 2
+
+#endif /* __DT_BINDINGS_STPMIC1_H__ */

include/dt-bindings/pinctrl/lochnagar.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Device Tree defines for Lochnagar pinctrl
+ *
+ * Copyright (c) 2018 Cirrus Logic, Inc. and
+ *                    Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#ifndef DT_BINDINGS_PINCTRL_LOCHNAGAR_H
+#define DT_BINDINGS_PINCTRL_LOCHNAGAR_H
+
+#define LOCHNAGAR1_PIN_CDC_RESET		0
+#define LOCHNAGAR1_PIN_DSP_RESET		1
+#define LOCHNAGAR1_PIN_CDC_CIF1MODE		2
+#define LOCHNAGAR1_PIN_NUM_GPIOS		3
+
+#define LOCHNAGAR2_PIN_CDC_RESET		0
+#define LOCHNAGAR2_PIN_DSP_RESET		1
+#define LOCHNAGAR2_PIN_CDC_CIF1MODE		2
+#define LOCHNAGAR2_PIN_CDC_LDOENA		3
+#define LOCHNAGAR2_PIN_SPDIF_HWMODE		4
+#define LOCHNAGAR2_PIN_SPDIF_RESET		5
+#define LOCHNAGAR2_PIN_FPGA_GPIO1		6
+#define LOCHNAGAR2_PIN_FPGA_GPIO2		7
+#define LOCHNAGAR2_PIN_FPGA_GPIO3		8
+#define LOCHNAGAR2_PIN_FPGA_GPIO4		9
+#define LOCHNAGAR2_PIN_FPGA_GPIO5		10
+#define LOCHNAGAR2_PIN_FPGA_GPIO6		11
+#define LOCHNAGAR2_PIN_CDC_GPIO1		12
+#define LOCHNAGAR2_PIN_CDC_GPIO2		13
+#define LOCHNAGAR2_PIN_CDC_GPIO3		14
+#define LOCHNAGAR2_PIN_CDC_GPIO4		15
+#define LOCHNAGAR2_PIN_CDC_GPIO5		16
+#define LOCHNAGAR2_PIN_CDC_GPIO6		17
+#define LOCHNAGAR2_PIN_CDC_GPIO7		18
+#define LOCHNAGAR2_PIN_CDC_GPIO8		19
+#define LOCHNAGAR2_PIN_DSP_GPIO1		20
+#define LOCHNAGAR2_PIN_DSP_GPIO2		21
+#define LOCHNAGAR2_PIN_DSP_GPIO3		22
+#define LOCHNAGAR2_PIN_DSP_GPIO4		23
+#define LOCHNAGAR2_PIN_DSP_GPIO5		24
+#define LOCHNAGAR2_PIN_DSP_GPIO6		25
+#define LOCHNAGAR2_PIN_GF_GPIO2			26
+#define LOCHNAGAR2_PIN_GF_GPIO3			27
+#define LOCHNAGAR2_PIN_GF_GPIO7			28
+#define LOCHNAGAR2_PIN_CDC_AIF1_BCLK		29
+#define LOCHNAGAR2_PIN_CDC_AIF1_RXDAT		30
+#define LOCHNAGAR2_PIN_CDC_AIF1_LRCLK		31
+#define LOCHNAGAR2_PIN_CDC_AIF1_TXDAT		32
+#define LOCHNAGAR2_PIN_CDC_AIF2_BCLK		33
+#define LOCHNAGAR2_PIN_CDC_AIF2_RXDAT		34
+#define LOCHNAGAR2_PIN_CDC_AIF2_LRCLK		35
+#define LOCHNAGAR2_PIN_CDC_AIF2_TXDAT		36
+#define LOCHNAGAR2_PIN_CDC_AIF3_BCLK		37
+#define LOCHNAGAR2_PIN_CDC_AIF3_RXDAT		38
+#define LOCHNAGAR2_PIN_CDC_AIF3_LRCLK		39
+#define LOCHNAGAR2_PIN_CDC_AIF3_TXDAT		40
+#define LOCHNAGAR2_PIN_DSP_AIF1_BCLK		41
+#define LOCHNAGAR2_PIN_DSP_AIF1_RXDAT		42
+#define LOCHNAGAR2_PIN_DSP_AIF1_LRCLK		43
+#define LOCHNAGAR2_PIN_DSP_AIF1_TXDAT		44
+#define LOCHNAGAR2_PIN_DSP_AIF2_BCLK		45
+#define LOCHNAGAR2_PIN_DSP_AIF2_RXDAT		46
+#define LOCHNAGAR2_PIN_DSP_AIF2_LRCLK		47
+#define LOCHNAGAR2_PIN_DSP_AIF2_TXDAT		48
+#define LOCHNAGAR2_PIN_PSIA1_BCLK		49
+#define LOCHNAGAR2_PIN_PSIA1_RXDAT		50
+#define LOCHNAGAR2_PIN_PSIA1_LRCLK		51
+#define LOCHNAGAR2_PIN_PSIA1_TXDAT		52
+#define LOCHNAGAR2_PIN_PSIA2_BCLK		53
+#define LOCHNAGAR2_PIN_PSIA2_RXDAT		54
+#define LOCHNAGAR2_PIN_PSIA2_LRCLK		55
+#define LOCHNAGAR2_PIN_PSIA2_TXDAT		56
+#define LOCHNAGAR2_PIN_GF_AIF3_BCLK		57
+#define LOCHNAGAR2_PIN_GF_AIF3_RXDAT		58
+#define LOCHNAGAR2_PIN_GF_AIF3_LRCLK		59
+#define LOCHNAGAR2_PIN_GF_AIF3_TXDAT		60
+#define LOCHNAGAR2_PIN_GF_AIF4_BCLK		61
+#define LOCHNAGAR2_PIN_GF_AIF4_RXDAT		62
+#define LOCHNAGAR2_PIN_GF_AIF4_LRCLK		63
+#define LOCHNAGAR2_PIN_GF_AIF4_TXDAT		64
+#define LOCHNAGAR2_PIN_GF_AIF1_BCLK		65
+#define LOCHNAGAR2_PIN_GF_AIF1_RXDAT		66
+#define LOCHNAGAR2_PIN_GF_AIF1_LRCLK		67
+#define LOCHNAGAR2_PIN_GF_AIF1_TXDAT		68
+#define LOCHNAGAR2_PIN_GF_AIF2_BCLK		69
+#define LOCHNAGAR2_PIN_GF_AIF2_RXDAT		70
+#define LOCHNAGAR2_PIN_GF_AIF2_LRCLK		71
+#define LOCHNAGAR2_PIN_GF_AIF2_TXDAT		72
+#define LOCHNAGAR2_PIN_DSP_UART1_RX		73
+#define LOCHNAGAR2_PIN_DSP_UART1_TX		74
+#define LOCHNAGAR2_PIN_DSP_UART2_RX		75
+#define LOCHNAGAR2_PIN_DSP_UART2_TX		76
+#define LOCHNAGAR2_PIN_GF_UART2_RX		77
+#define LOCHNAGAR2_PIN_GF_UART2_TX		78
+#define LOCHNAGAR2_PIN_USB_UART_RX		79
+#define LOCHNAGAR2_PIN_CDC_PDMCLK1		80
+#define LOCHNAGAR2_PIN_CDC_PDMDAT1		81
+#define LOCHNAGAR2_PIN_CDC_PDMCLK2		82
+#define LOCHNAGAR2_PIN_CDC_PDMDAT2		83
+#define LOCHNAGAR2_PIN_CDC_DMICCLK1		84
+#define LOCHNAGAR2_PIN_CDC_DMICDAT1		85
+#define LOCHNAGAR2_PIN_CDC_DMICCLK2		86
+#define LOCHNAGAR2_PIN_CDC_DMICDAT2		87
+#define LOCHNAGAR2_PIN_CDC_DMICCLK3		88
+#define LOCHNAGAR2_PIN_CDC_DMICDAT3		89
+#define LOCHNAGAR2_PIN_CDC_DMICCLK4		90
+#define LOCHNAGAR2_PIN_CDC_DMICDAT4		91
+#define LOCHNAGAR2_PIN_DSP_DMICCLK1		92
+#define LOCHNAGAR2_PIN_DSP_DMICDAT1		93
+#define LOCHNAGAR2_PIN_DSP_DMICCLK2		94
+#define LOCHNAGAR2_PIN_DSP_DMICDAT2		95
+#define LOCHNAGAR2_PIN_I2C2_SCL			96
+#define LOCHNAGAR2_PIN_I2C2_SDA			97
+#define LOCHNAGAR2_PIN_I2C3_SCL			98
+#define LOCHNAGAR2_PIN_I2C3_SDA			99
+#define LOCHNAGAR2_PIN_I2C4_SCL			100
+#define LOCHNAGAR2_PIN_I2C4_SDA			101
+#define LOCHNAGAR2_PIN_DSP_STANDBY		102
+#define LOCHNAGAR2_PIN_CDC_MCLK1		103
+#define LOCHNAGAR2_PIN_CDC_MCLK2		104
+#define LOCHNAGAR2_PIN_DSP_CLKIN		105
+#define LOCHNAGAR2_PIN_PSIA1_MCLK		106
+#define LOCHNAGAR2_PIN_PSIA2_MCLK		107
+#define LOCHNAGAR2_PIN_GF_GPIO1			108
+#define LOCHNAGAR2_PIN_GF_GPIO5			109
+#define LOCHNAGAR2_PIN_DSP_GPIO20		110
+#define LOCHNAGAR2_PIN_NUM_GPIOS		111
+
+#endif

include/linux/mfd/cros_ec.h

@@ -281,16 +281,6 @@ int cros_ec_cmd_xfer(struct cros_ec_device *ec_dev,
 int cros_ec_cmd_xfer_status(struct cros_ec_device *ec_dev,
 			    struct cros_ec_command *msg);
 
-/**
- * cros_ec_remove() - Remove a ChromeOS EC.
- * @ec_dev: Device to register.
- *
- * Call this to deregister a ChromeOS EC, then clean up any private data.
- *
- * Return: 0 on success or negative error code.
- */
-int cros_ec_remove(struct cros_ec_device *ec_dev);
-
 /**
  * cros_ec_register() - Register a new ChromeOS EC, using the provided info.
  * @ec_dev: Device to register.
@@ -335,15 +325,4 @@ int cros_ec_get_next_event(struct cros_ec_device *ec_dev, bool *wake_event);
  */
 u32 cros_ec_get_host_event(struct cros_ec_device *ec_dev);
 
-/* sysfs stuff */
-extern struct attribute_group cros_ec_attr_group;
-extern struct attribute_group cros_ec_lightbar_attr_group;
-extern struct attribute_group cros_ec_vbc_attr_group;
-
-/* debugfs stuff */
-int cros_ec_debugfs_init(struct cros_ec_dev *ec);
-void cros_ec_debugfs_remove(struct cros_ec_dev *ec);
-void cros_ec_debugfs_suspend(struct cros_ec_dev *ec);
-void cros_ec_debugfs_resume(struct cros_ec_dev *ec);
-
 #endif /* __LINUX_MFD_CROS_EC_H */

include/linux/mfd/lochnagar.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Lochnagar internals
+ *
+ * Copyright (c) 2013-2018 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#include <linux/device.h>
+#include <linux/mutex.h>
+#include <linux/regmap.h>
+
+#ifndef CIRRUS_LOCHNAGAR_H
+#define CIRRUS_LOCHNAGAR_H
+
+enum lochnagar_type {
+	LOCHNAGAR1,
+	LOCHNAGAR2,
+};
+
+/**
+ * struct lochnagar - Core data for the Lochnagar audio board driver.
+ *
+ * @type: The type of Lochnagar device connected.
+ * @dev: A pointer to the struct device for the main MFD.
+ * @regmap: The devices main register map.
+ * @analogue_config_lock: Lock used to protect updates in the analogue
+ * configuration as these must not be changed whilst the hardware is processing
+ * the last update.
+ */
+struct lochnagar {
+	enum lochnagar_type type;
+	struct device *dev;
+	struct regmap *regmap;
+
+	/* Lock to protect updates to the analogue configuration */
+	struct mutex analogue_config_lock;
+};
+
+/* Register Addresses */
+#define LOCHNAGAR_SOFTWARE_RESET                             0x00
+#define LOCHNAGAR_FIRMWARE_ID1                               0x01
+#define LOCHNAGAR_FIRMWARE_ID2                               0x02
+
+/* (0x0000)  Software Reset */
+#define LOCHNAGAR_DEVICE_ID_MASK                           0xFFFC
+#define LOCHNAGAR_DEVICE_ID_SHIFT                               2
+#define LOCHNAGAR_REV_ID_MASK                              0x0003
+#define LOCHNAGAR_REV_ID_SHIFT                                  0
+
+int lochnagar_update_config(struct lochnagar *lochnagar);
+
+#endif

include/linux/mfd/lochnagar1_regs.h

+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Lochnagar1 register definitions
+ *
+ * Copyright (c) 2017-2018 Cirrus Logic, Inc. and
+ *                         Cirrus Logic International Semiconductor Ltd.
+ *
+ * Author: Charles Keepax <ckeepax@opensource.cirrus.com>
+ */
+
+#ifndef LOCHNAGAR1_REGISTERS_H
+#define LOCHNAGAR1_REGISTERS_H
+
+/* Register Addresses */
+#define LOCHNAGAR1_CDC_AIF1_SEL                       0x0008
+#define LOCHNAGAR1_CDC_AIF2_SEL                       0x0009
+#define LOCHNAGAR1_CDC_AIF3_SEL                       0x000A
+#define LOCHNAGAR1_CDC_MCLK1_SEL                      0x000B
+#define LOCHNAGAR1_CDC_MCLK2_SEL                      0x000C
+#define LOCHNAGAR1_CDC_AIF_CTRL1                      0x000D
+#define LOCHNAGAR1_CDC_AIF_CTRL2                      0x000E
+#define LOCHNAGAR1_EXT_AIF_CTRL                       0x000F
+#define LOCHNAGAR1_DSP_AIF1_SEL                       0x0010
+#define LOCHNAGAR1_DSP_AIF2_SEL                       0x0011
+#define LOCHNAGAR1_DSP_CLKIN_SEL                      0x0012
+#define LOCHNAGAR1_DSP_AIF                            0x0013
+#define LOCHNAGAR1_GF_AIF1                            0x0014
+#define LOCHNAGAR1_GF_AIF2                            0x0015
+#define LOCHNAGAR1_PSIA_AIF                           0x0016
+#define LOCHNAGAR1_PSIA1_SEL                          0x0017
+#define LOCHNAGAR1_PSIA2_SEL                          0x0018
+#define LOCHNAGAR1_SPDIF_AIF_SEL                      0x0019
+#define LOCHNAGAR1_GF_AIF3_SEL                        0x001C
+#define LOCHNAGAR1_GF_AIF4_SEL                        0x001D
+#define LOCHNAGAR1_GF_CLKOUT1_SEL                     0x001E
+#define LOCHNAGAR1_GF_AIF1_SEL                        0x001F
+#define LOCHNAGAR1_GF_AIF2_SEL                        0x0020
+#define LOCHNAGAR1_GF_GPIO2                           0x0026
+#define LOCHNAGAR1_GF_GPIO3                           0x0027
+#define LOCHNAGAR1_GF_GPIO7                           0x0028
+#define LOCHNAGAR1_RST                                0x0029
+#define LOCHNAGAR1_LED1                               0x002A
+#define LOCHNAGAR1_LED2                               0x002B
+#define LOCHNAGAR1_I2C_CTRL                           0x0046
+
+/*
+ * (0x0008 - 0x000C, 0x0010 - 0x0012, 0x0017 - 0x0020)
+ * CDC_AIF1_SEL - GF_AIF2_SEL
+ */
+#define LOCHNAGAR1_SRC_MASK                             0xFF
+#define LOCHNAGAR1_SRC_SHIFT                               0
+
+/* (0x000D)  CDC_AIF_CTRL1 */
+#define LOCHNAGAR1_CDC_AIF2_LRCLK_DIR_MASK              0x40
+#define LOCHNAGAR1_CDC_AIF2_LRCLK_DIR_SHIFT                6
+#define LOCHNAGAR1_CDC_AIF2_BCLK_DIR_MASK               0x20
+#define LOCHNAGAR1_CDC_AIF2_BCLK_DIR_SHIFT                 5
+#define LOCHNAGAR1_CDC_AIF2_ENA_MASK                    0x10
+#define LOCHNAGAR1_CDC_AIF2_ENA_SHIFT                      4
+#define LOCHNAGAR1_CDC_AIF1_LRCLK_DIR_MASK              0x04
+#define LOCHNAGAR1_CDC_AIF1_LRCLK_DIR_SHIFT                2
+#define LOCHNAGAR1_CDC_AIF1_BCLK_DIR_MASK               0x02
+#define LOCHNAGAR1_CDC_AIF1_BCLK_DIR_SHIFT                 1
+#define LOCHNAGAR1_CDC_AIF1_ENA_MASK                    0x01
+#define LOCHNAGAR1_CDC_AIF1_ENA_SHIFT                      0
+
+/* (0x000E)  CDC_AIF_CTRL2 */
+#define LOCHNAGAR1_CDC_AIF3_LRCLK_DIR_MASK              0x40
+#define LOCHNAGAR1_CDC_AIF3_LRCLK_DIR_SHIFT                6
+#define LOCHNAGAR1_CDC_AIF3_BCLK_DIR_MASK               0x20
+#define LOCHNAGAR1_CDC_AIF3_BCLK_DIR_SHIFT                 5
+#define LOCHNAGAR1_CDC_AIF3_ENA_MASK                    0x10
+#define LOCHNAGAR1_CDC_AIF3_ENA_SHIFT                      4
+#define LOCHNAGAR1_CDC_MCLK1_ENA_MASK                   0x02
+#define LOCHNAGAR1_CDC_MCLK1_ENA_SHIFT                     1
+#define LOCHNAGAR1_CDC_MCLK2_ENA_MASK                   0x01
+#define LOCHNAGAR1_CDC_MCLK2_ENA_SHIFT                     0
+
+/* (0x000F)  EXT_AIF_CTRL */
+#define LOCHNAGAR1_SPDIF_AIF_LRCLK_DIR_MASK             0x20
+#define LOCHNAGAR1_SPDIF_AIF_LRCLK_DIR_SHIFT               5
+#define LOCHNAGAR1_SPDIF_AIF_BCLK_DIR_MASK              0x10
+#define LOCHNAGAR1_SPDIF_AIF_BCLK_DIR_SHIFT                4
+#define LOCHNAGAR1_SPDIF_AIF_ENA_MASK                   0x08
+#define LOCHNAGAR1_SPDIF_AIF_ENA_SHIFT                     3
+
+/* (0x0013)  DSP_AIF */
+#define LOCHNAGAR1_DSP_AIF2_LRCLK_DIR_MASK              0x40
+#define LOCHNAGAR1_DSP_AIF2_LRCLK_DIR_SHIFT                6
+#define LOCHNAGAR1_DSP_AIF2_BCLK_DIR_MASK               0x20
+#define LOCHNAGAR1_DSP_AIF2_BCLK_DIR_SHIFT                 5
+#define LOCHNAGAR1_DSP_AIF2_ENA_MASK                    0x10
+#define LOCHNAGAR1_DSP_AIF2_ENA_SHIFT                      4
+#define LOCHNAGAR1_DSP_CLKIN_ENA_MASK                   0x08
+#define LOCHNAGAR1_DSP_CLKIN_ENA_SHIFT                     3
+#define LOCHNAGAR1_DSP_AIF1_LRCLK_DIR_MASK              0x04
+#define LOCHNAGAR1_DSP_AIF1_LRCLK_DIR_SHIFT                2
+#define LOCHNAGAR1_DSP_AIF1_BCLK_DIR_MASK               0x02
+#define LOCHNAGAR1_DSP_AIF1_BCLK_DIR_SHIFT                 1
+#define LOCHNAGAR1_DSP_AIF1_ENA_MASK                    0x01
+#define LOCHNAGAR1_DSP_AIF1_ENA_SHIFT                      0
+
+/* (0x0014)  GF_AIF1 */
+#define LOCHNAGAR1_GF_CLKOUT1_ENA_MASK                  0x40
+#define LOCHNAGAR1_GF_CLKOUT1_ENA_SHIFT                    6
+#define LOCHNAGAR1_GF_AIF3_LRCLK_DIR_MASK               0x20
+#define LOCHNAGAR1_GF_AIF3_LRCLK_DIR_SHIFT                 5
+#define LOCHNAGAR1_GF_AIF3_BCLK_DIR_MASK                0x10
+#define LOCHNAGAR1_GF_AIF3_BCLK_DIR_SHIFT                  4
+#define LOCHNAGAR1_GF_AIF3_ENA_MASK                     0x08
+#define LOCHNAGAR1_GF_AIF3_ENA_SHIFT                       3
+#define LOCHNAGAR1_GF_AIF1_LRCLK_DIR_MASK               0x04
+#define LOCHNAGAR1_GF_AIF1_LRCLK_DIR_SHIFT                 2
+#define LOCHNAGAR1_GF_AIF1_BCLK_DIR_MASK                0x02
+#define LOCHNAGAR1_GF_AIF1_BCLK_DIR_SHIFT                  1
+#define LOCHNAGAR1_GF_AIF1_ENA_MASK                     0x01
+#define LOCHNAGAR1_GF_AIF1_ENA_SHIFT                       0
+
+/* (0x0015)  GF_AIF2 */
+#define LOCHNAGAR1_GF_AIF4_LRCLK_DIR_MASK               0x20
+#define LOCHNAGAR1_GF_AIF4_LRCLK_DIR_SHIFT                 5
+#define LOCHNAGAR1_GF_AIF4_BCLK_DIR_MASK                0x10
+#define LOCHNAGAR1_GF_AIF4_BCLK_DIR_SHIFT                  4
+#define LOCHNAGAR1_GF_AIF4_ENA_MASK                     0x08
+#define LOCHNAGAR1_GF_AIF4_ENA_SHIFT                       3
+#define LOCHNAGAR1_GF_AIF2_LRCLK_DIR_MASK               0x04
+#define LOCHNAGAR1_GF_AIF2_LRCLK_DIR_SHIFT                 2
+#define LOCHNAGAR1_GF_AIF2_BCLK_DIR_MASK                0x02
+#define LOCHNAGAR1_GF_AIF2_BCLK_DIR_SHIFT                  1
+#define LOCHNAGAR1_GF_AIF2_ENA_MASK                     0x01
+#define LOCHNAGAR1_GF_AIF2_ENA_SHIFT                       0
+
+/* (0x0016)  PSIA_AIF */
+#define LOCHNAGAR1_PSIA2_LRCLK_DIR_MASK                 0x40
+#define LOCHNAGAR1_PSIA2_LRCLK_DIR_SHIFT                   6
+#define LOCHNAGAR1_PSIA2_BCLK_DIR_MASK                  0x20
+#define LOCHNAGAR1_PSIA2_BCLK_DIR_SHIFT                    5
+#define LOCHNAGAR1_PSIA2_ENA_MASK                       0x10
+#define LOCHNAGAR1_PSIA2_ENA_SHIFT                         4
+#define LOCHNAGAR1_PSIA1_LRCLK_DIR_MASK                 0x04
+#define LOCHNAGAR1_PSIA1_LRCLK_DIR_SHIFT                   2
+#define LOCHNAGAR1_PSIA1_BCLK_DIR_MASK                  0x02
+#define LOCHNAGAR1_PSIA1_BCLK_DIR_SHIFT                    1
+#define LOCHNAGAR1_PSIA1_ENA_MASK                       0x01
+#define LOCHNAGAR1_PSIA1_ENA_SHIFT                         0
+
+/* (0x0029)  RST */
+#define LOCHNAGAR1_DSP_RESET_MASK                       0x02
+#define LOCHNAGAR1_DSP_RESET_SHIFT                         1
+#define LOCHNAGAR1_CDC_RESET_MASK                       0x01
+#define LOCHNAGAR1_CDC_RESET_SHIFT                         0
+
+/* (0x0046)  I2C_CTRL */
+#define LOCHNAGAR1_CDC_CIF_MODE_MASK                    0x01
+#define LOCHNAGAR1_CDC_CIF_MODE_SHIFT                      0
+
+#endif

include/linux/mfd/tps65218.h

@@ -137,6 +137,10 @@
 #define TPS65218_CONFIG1_PGDLY_MASK	0x18
 #define TPS65218_CONFIG1_STRICT		BIT(2)
 #define TPS65218_CONFIG1_UVLO_MASK	0x3
+#define TPS65218_CONFIG1_UVLO_2750000	0x0
+#define TPS65218_CONFIG1_UVLO_2950000	0x1
+#define TPS65218_CONFIG1_UVLO_3250000	0x2
+#define TPS65218_CONFIG1_UVLO_3350000	0x3
 
 #define TPS65218_CONFIG2_DC12_RST	BIT(7)
 #define TPS65218_CONFIG2_UVLOHYS	BIT(6)

include/linux/mfd/wm831x/core.h

@@ -418,7 +418,6 @@ int wm831x_bulk_read(struct wm831x *wm831x, unsigned short reg,
 		     int count, u16 *buf);
 
 int wm831x_device_init(struct wm831x *wm831x, int irq);
-void wm831x_device_exit(struct wm831x *wm831x);
 int wm831x_device_suspend(struct wm831x *wm831x);
 void wm831x_device_shutdown(struct wm831x *wm831x);
 int wm831x_irq_init(struct wm831x *wm831x, int irq);