ARM: dts: imx6qdl-sabrelite: move usbotg power enable to pinctrl_usbotg

This patch moves pin EIM_D22(power enable) from pinctrl_hog to pinctrl_usbotg.
It also explicitly sets the pad to 0x000b0, which is also the value
that it has before this patch if using mainline u-boot.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Signed-off-by: Shawn Guo <shawn.guo@linaro.org>

arch/arm/boot/dts/imx6qdl-sabrelite.dtsi

@@ -114,7 +114,6 @@ &iomuxc {
 	imx6q-sabrelite {
 		pinctrl_hog: hoggrp {
 			fsl,pins = <
-				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x80000000
 				MX6QDL_PAD_EIM_D23__GPIO3_IO23  0x80000000
 				MX6QDL_PAD_GPIO_0__CCM_CLKO1    0x80000000
 			>;
@@ -183,6 +182,8 @@ MX6QDL_PAD_EIM_D27__UART2_RX_DATA	0x1b0b1
 		pinctrl_usbotg: usbotggrp {
 			fsl,pins = <
 				MX6QDL_PAD_GPIO_1__USB_OTG_ID		0x17059
+				/* power enable, high active */
+				MX6QDL_PAD_EIM_D22__GPIO3_IO22  0x000b0
 			>;
 		};