[PATCH] usb-storage: convert spaces to tabs

This is a minor cleanup to convert 8 spaces into tabs.  There is no
functional change here.

drivers/usb/storage/datafab.h

@@ -27,14 +27,14 @@
 extern int datafab_transport(Scsi_Cmnd *srb, struct us_data *us);
 
 struct datafab_info {
-	unsigned long   sectors;     // total sector count
-	unsigned long   ssize;       // sector size in bytes
-	char            lun;         // used for dual-slot readers
-        
-        // the following aren't used yet
+	unsigned long   sectors;	// total sector count
+	unsigned long   ssize;		// sector size in bytes
+	char		lun;		// used for dual-slot readers
+	
+	// the following aren't used yet
 	unsigned char   sense_key;
-	unsigned long   sense_asc;   // additional sense code
-	unsigned long   sense_ascq;  // additional sense code qualifier
+	unsigned long   sense_asc;	// additional sense code
+	unsigned long   sense_ascq;	// additional sense code qualifier
 };
 
 #endif

drivers/usb/storage/protocol.h

@@ -53,7 +53,7 @@
 #define US_SC_UFI	0x04		/* Floppy */
 #define US_SC_8070	0x05		/* Removable media */
 #define US_SC_SCSI	0x06		/* Transparent */
-#define US_SC_ISD200    0x07            /* ISD200 ATA */
+#define US_SC_ISD200    0x07		/* ISD200 ATA */
 #define US_SC_MIN	US_SC_RBC
 #define US_SC_MAX	US_SC_ISD200
 

drivers/usb/storage/transport.h

@@ -55,8 +55,7 @@
 #define US_PR_SCM_ATAPI	0x80		/* SCM-ATAPI bridge */
 #endif
 #ifdef CONFIG_USB_STORAGE_SDDR09
-#define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for
-						SDDR-09 */
+#define US_PR_EUSB_SDDR09	0x81	/* SCM-SCSI bridge for SDDR-09 */
 #endif
 #ifdef CONFIG_USB_STORAGE_SDDR55
 #define US_PR_SDDR55	0x82		/* SDDR-55 (made up) */
@@ -64,15 +63,15 @@
 #define US_PR_DPCM_USB  0xf0		/* Combination CB/SDDR09 */
 
 #ifdef CONFIG_USB_STORAGE_FREECOM
-#define US_PR_FREECOM   0xf1            /* Freecom */
+#define US_PR_FREECOM   0xf1	    /* Freecom */
 #endif
 
 #ifdef CONFIG_USB_STORAGE_DATAFAB
-#define US_PR_DATAFAB   0xf2            /* Datafab chipsets */
+#define US_PR_DATAFAB   0xf2	    /* Datafab chipsets */
 #endif
 
 #ifdef CONFIG_USB_STORAGE_JUMPSHOT
-#define US_PR_JUMPSHOT  0xf3            /* Lexar Jumpshot */
+#define US_PR_JUMPSHOT  0xf3	    /* Lexar Jumpshot */
 #endif
 
 /*
@@ -118,10 +117,10 @@ struct bulk_cs_wrap {
  * usb_stor_bulk_transfer_xxx() return codes, in order of severity
  */
 
-#define USB_STOR_XFER_GOOD		0  /* good transfer                 */
-#define USB_STOR_XFER_SHORT		1  /* transfered less than expected */
-#define USB_STOR_XFER_STALLED		2  /* endpoint stalled		    */
-#define USB_STOR_XFER_ERROR		3  /* transfer died in the middle   */
+#define USB_STOR_XFER_GOOD	0	/* good transfer                 */
+#define USB_STOR_XFER_SHORT	1	/* transfered less than expected */
+#define USB_STOR_XFER_STALLED	2	/* endpoint stalled              */
+#define USB_STOR_XFER_ERROR	3	/* transfer died in the middle   */
 
 /*
  * Transport return codes

drivers/usb/storage/unusual_devs.h

@@ -264,7 +264,7 @@ UNUSUAL_DEV(  0x054c, 0x0032, 0x0000, 0x9999,
 		
 /* Submitted by Nathan Babb <nathan@lexi.com> */
 UNUSUAL_DEV(  0x054c, 0x006d, 0x0000, 0x9999,
-                "Sony",
+		"Sony",
 		"PEG Mass Storage",
 		US_SC_8070, US_PR_CBI, NULL,
 		US_FL_FIX_INQUIRY ),
@@ -546,10 +546,10 @@ UNUSUAL_DEV( 0x07cf, 0x1001, 0x1000, 0x9009,
 
 /* aeb */
 UNUSUAL_DEV( 0x090c, 0x1132, 0x0000, 0xffff,
-	        "Feiya",
-	        "5-in-1 Card Reader",
-	        US_SC_SCSI, US_PR_BULK, NULL,
-	        US_FL_FIX_CAPACITY ),
+		"Feiya",
+		"5-in-1 Card Reader",
+		US_SC_SCSI, US_PR_BULK, NULL,
+		US_FL_FIX_CAPACITY ),
 
 UNUSUAL_DEV(  0x097a, 0x0001, 0x0000, 0x0001,
 		"Minds@Work",

drivers/usb/storage/usb.c

@@ -943,7 +943,7 @@ static void storage_disconnect(struct usb_interface *intf)
 
 	US_DEBUGP("storage_disconnect() called\n");
 
-       	ss = usb_get_intfdata(intf);
+	ss = usb_get_intfdata(intf);
 	usb_set_intfdata(intf, NULL);
 
 	/* serious error -- we're attempting to disconnect an interface but