Commit d0c72347 authored by Stanislaw Gruszka's avatar Stanislaw Gruszka

iwlegacy: s/rx_handler/handler/

Signed-off-by: default avatarStanislaw Gruszka <sgruszka@redhat.com>
parent 4d69c752
......@@ -843,7 +843,7 @@ static void il3945_rx_card_state_notif(struct il_priv *il,
}
/**
* il3945_setup_rx_handlers - Initialize Rx handler callbacks
* il3945_setup_handlers - Initialize Rx handler callbacks
*
* Setup the RX handlers for each of the reply types sent from the uCode
* to the host.
......@@ -851,32 +851,32 @@ static void il3945_rx_card_state_notif(struct il_priv *il,
* This function chains into the hardware specific files for them to setup
* any hardware specific handlers as well.
*/
static void il3945_setup_rx_handlers(struct il_priv *il)
static void il3945_setup_handlers(struct il_priv *il)
{
il->rx_handlers[N_ALIVE] = il3945_rx_reply_alive;
il->rx_handlers[C_ADD_STA] = il3945_rx_reply_add_sta;
il->rx_handlers[N_ERROR] = il_rx_reply_error;
il->rx_handlers[N_CHANNEL_SWITCH] = il_rx_csa;
il->rx_handlers[N_SPECTRUM_MEASUREMENT] =
il->handlers[N_ALIVE] = il3945_rx_reply_alive;
il->handlers[C_ADD_STA] = il3945_rx_reply_add_sta;
il->handlers[N_ERROR] = il_rx_reply_error;
il->handlers[N_CHANNEL_SWITCH] = il_rx_csa;
il->handlers[N_SPECTRUM_MEASUREMENT] =
il_rx_spectrum_measure_notif;
il->rx_handlers[N_PM_SLEEP] = il_rx_pm_sleep_notif;
il->rx_handlers[N_PM_DEBUG_STATS] =
il->handlers[N_PM_SLEEP] = il_rx_pm_sleep_notif;
il->handlers[N_PM_DEBUG_STATS] =
il_rx_pm_debug_stats_notif;
il->rx_handlers[N_BEACON] = il3945_rx_beacon_notif;
il->handlers[N_BEACON] = il3945_rx_beacon_notif;
/*
* The same handler is used for both the REPLY to a discrete
* stats request from the host as well as for the periodic
* stats notifications (after received beacons) from the uCode.
*/
il->rx_handlers[C_STATS] = il3945_reply_stats;
il->rx_handlers[N_STATS] = il3945_hw_rx_stats;
il->handlers[C_STATS] = il3945_reply_stats;
il->handlers[N_STATS] = il3945_hw_rx_stats;
il_setup_rx_scan_handlers(il);
il->rx_handlers[N_CARD_STATE] = il3945_rx_card_state_notif;
il->handlers[N_CARD_STATE] = il3945_rx_card_state_notif;
/* Set up hardware specific Rx handlers */
il3945_hw_rx_handler_setup(il);
il3945_hw_handler_setup(il);
}
/************************** RX-FUNCTIONS ****************************/
......@@ -1194,7 +1194,7 @@ int il3945_calc_db_from_ratio(int sig_ratio)
/**
* il3945_rx_handle - Main entry function for receiving responses from uCode
*
* Uses the il->rx_handlers callback function array to invoke
* Uses the il->handlers callback function array to invoke
* the appropriate handlers, including command responses,
* frame-received notifications, and other notifications.
*/
......@@ -1258,12 +1258,12 @@ static void il3945_rx_handle(struct il_priv *il)
/* Based on type of command response or notification,
* handle those that need handling via function in
* rx_handlers table. See il3945_setup_rx_handlers() */
if (il->rx_handlers[pkt->hdr.cmd]) {
* handlers table. See il3945_setup_handlers() */
if (il->handlers[pkt->hdr.cmd]) {
D_RX("r = %d, i = %d, %s, 0x%02x\n", r, i,
il_get_cmd_string(pkt->hdr.cmd), pkt->hdr.cmd);
il->isr_stats.rx_handlers[pkt->hdr.cmd]++;
il->rx_handlers[pkt->hdr.cmd] (il, rxb);
il->isr_stats.handlers[pkt->hdr.cmd]++;
il->handlers[pkt->hdr.cmd] (il, rxb);
} else {
/* No handling needed */
D_RX(
......@@ -1275,7 +1275,7 @@ static void il3945_rx_handle(struct il_priv *il)
/*
* XXX: After here, we should always check rxb->page
* against NULL before touching it or its virtual
* memory (pkt). Because some rx_handler might have
* memory (pkt). Because some handler might have
* already taken or freed the pages.
*/
......@@ -3807,7 +3807,7 @@ static int il3945_pci_probe(struct pci_dev *pdev, const struct pci_device_id *en
&il->bands[IEEE80211_BAND_2GHZ].channels[5],
&il->ctx);
il3945_setup_deferred_work(il);
il3945_setup_rx_handlers(il);
il3945_setup_handlers(il);
il_power_initialize(il);
/*********************************
......
......@@ -2462,10 +2462,10 @@ unsigned int il3945_hw_get_beacon_cmd(struct il_priv *il,
return sizeof(struct il3945_tx_beacon_cmd) + frame_size;
}
void il3945_hw_rx_handler_setup(struct il_priv *il)
void il3945_hw_handler_setup(struct il_priv *il)
{
il->rx_handlers[C_TX] = il3945_rx_reply_tx;
il->rx_handlers[N_3945_RX] = il3945_rx_reply_rx;
il->handlers[C_TX] = il3945_rx_reply_tx;
il->handlers[N_3945_RX] = il3945_rx_reply_rx;
}
void il3945_hw_setup_deferred_work(struct il_priv *il)
......
......@@ -225,7 +225,7 @@ extern void il3945_dump_nic_error_log(struct il_priv *il);
* il3945_mac_ <-- mac80211 callback
*
****************************************************************************/
extern void il3945_hw_rx_handler_setup(struct il_priv *il);
extern void il3945_hw_handler_setup(struct il_priv *il);
extern void il3945_hw_setup_deferred_work(struct il_priv *il);
extern void il3945_hw_cancel_deferred_work(struct il_priv *il);
extern int il3945_hw_rxq_stop(struct il_priv *il);
......
......@@ -3911,7 +3911,7 @@ static void il4965_rx_card_state_notif(struct il_priv *il,
}
/**
* il4965_setup_rx_handlers - Initialize Rx handler callbacks
* il4965_setup_handlers - Initialize Rx handler callbacks
*
* Setup the RX handlers for each of the reply types sent from the uCode
* to the host.
......@@ -3919,47 +3919,47 @@ static void il4965_rx_card_state_notif(struct il_priv *il,
* This function chains into the hardware specific files for them to setup
* any hardware specific handlers as well.
*/
static void il4965_setup_rx_handlers(struct il_priv *il)
static void il4965_setup_handlers(struct il_priv *il)
{
il->rx_handlers[N_ALIVE] = il4965_rx_reply_alive;
il->rx_handlers[N_ERROR] = il_rx_reply_error;
il->rx_handlers[N_CHANNEL_SWITCH] = il_rx_csa;
il->rx_handlers[N_SPECTRUM_MEASUREMENT] =
il->handlers[N_ALIVE] = il4965_rx_reply_alive;
il->handlers[N_ERROR] = il_rx_reply_error;
il->handlers[N_CHANNEL_SWITCH] = il_rx_csa;
il->handlers[N_SPECTRUM_MEASUREMENT] =
il_rx_spectrum_measure_notif;
il->rx_handlers[N_PM_SLEEP] = il_rx_pm_sleep_notif;
il->rx_handlers[N_PM_DEBUG_STATS] =
il->handlers[N_PM_SLEEP] = il_rx_pm_sleep_notif;
il->handlers[N_PM_DEBUG_STATS] =
il_rx_pm_debug_stats_notif;
il->rx_handlers[N_BEACON] = il4965_rx_beacon_notif;
il->handlers[N_BEACON] = il4965_rx_beacon_notif;
/*
* The same handler is used for both the REPLY to a discrete
* stats request from the host as well as for the periodic
* stats notifications (after received beacons) from the uCode.
*/
il->rx_handlers[C_STATS] = il4965_reply_stats;
il->rx_handlers[N_STATS] = il4965_rx_stats;
il->handlers[C_STATS] = il4965_reply_stats;
il->handlers[N_STATS] = il4965_rx_stats;
il_setup_rx_scan_handlers(il);
/* status change handler */
il->rx_handlers[N_CARD_STATE] =
il->handlers[N_CARD_STATE] =
il4965_rx_card_state_notif;
il->rx_handlers[N_MISSED_BEACONS] =
il->handlers[N_MISSED_BEACONS] =
il4965_rx_missed_beacon_notif;
/* Rx handlers */
il->rx_handlers[N_RX_PHY] = il4965_rx_reply_rx_phy;
il->rx_handlers[N_RX_MPDU] = il4965_rx_reply_rx;
il->handlers[N_RX_PHY] = il4965_rx_reply_rx_phy;
il->handlers[N_RX_MPDU] = il4965_rx_reply_rx;
/* block ack */
il->rx_handlers[N_COMPRESSED_BA] = il4965_rx_reply_compressed_ba;
il->handlers[N_COMPRESSED_BA] = il4965_rx_reply_compressed_ba;
/* Set up hardware specific Rx handlers */
il->cfg->ops->lib->rx_handler_setup(il);
il->cfg->ops->lib->handler_setup(il);
}
/**
* il4965_rx_handle - Main entry function for receiving responses from uCode
*
* Uses the il->rx_handlers callback function array to invoke
* Uses the il->handlers callback function array to invoke
* the appropriate handlers, including command responses,
* frame-received notifications, and other notifications.
*/
......@@ -4028,13 +4028,13 @@ void il4965_rx_handle(struct il_priv *il)
/* Based on type of command response or notification,
* handle those that need handling via function in
* rx_handlers table. See il4965_setup_rx_handlers() */
if (il->rx_handlers[pkt->hdr.cmd]) {
* handlers table. See il4965_setup_handlers() */
if (il->handlers[pkt->hdr.cmd]) {
D_RX("r = %d, i = %d, %s, 0x%02x\n", r,
i, il_get_cmd_string(pkt->hdr.cmd),
pkt->hdr.cmd);
il->isr_stats.rx_handlers[pkt->hdr.cmd]++;
il->rx_handlers[pkt->hdr.cmd] (il, rxb);
il->isr_stats.handlers[pkt->hdr.cmd]++;
il->handlers[pkt->hdr.cmd] (il, rxb);
} else {
/* No handling needed */
D_RX(
......@@ -4046,7 +4046,7 @@ void il4965_rx_handle(struct il_priv *il)
/*
* XXX: After here, we should always check rxb->page
* against NULL before touching it or its virtual
* memory (pkt). Because some rx_handler might have
* memory (pkt). Because some handler might have
* already taken or freed the pages.
*/
......@@ -6358,7 +6358,7 @@ il4965_pci_probe(struct pci_dev *pdev, const struct pci_device_id *ent)
}
il4965_setup_deferred_work(il);
il4965_setup_rx_handlers(il);
il4965_setup_handlers(il);
/*********************************************
* 8. Enable interrupts and read RFKILL state
......
......@@ -2142,13 +2142,13 @@ static void il4965_rx_beacon_notif(struct il_priv *il,
}
/* Set up 4965-specific Rx frame reply handlers */
static void il4965_rx_handler_setup(struct il_priv *il)
static void il4965_handler_setup(struct il_priv *il)
{
/* Legacy Rx frames */
il->rx_handlers[N_RX] = il4965_rx_reply_rx;
il->handlers[N_RX] = il4965_rx_reply_rx;
/* Tx response */
il->rx_handlers[C_TX] = il4965_rx_reply_tx;
il->rx_handlers[N_BEACON] = il4965_rx_beacon_notif;
il->handlers[C_TX] = il4965_rx_reply_tx;
il->handlers[N_BEACON] = il4965_rx_beacon_notif;
}
static struct il_hcmd_ops il4965_hcmd = {
......@@ -2316,7 +2316,7 @@ static struct il_lib_ops il4965_lib = {
.txq_attach_buf_to_tfd = il4965_hw_txq_attach_buf_to_tfd,
.txq_free_tfd = il4965_hw_txq_free_tfd,
.txq_init = il4965_hw_tx_queue_init,
.rx_handler_setup = il4965_rx_handler_setup,
.handler_setup = il4965_handler_setup,
.is_valid_rtc_data_addr = il4965_hw_valid_rtc_data_addr,
.init_alive_start = il4965_init_alive_start,
.load_ucode = il4965_load_bsm,
......
......@@ -136,7 +136,7 @@ struct il_lib_ops {
int (*txq_init)(struct il_priv *il,
struct il_tx_queue *txq);
/* setup Rx handler */
void (*rx_handler_setup)(struct il_priv *il);
void (*handler_setup)(struct il_priv *il);
/* alive notification after init uCode load */
void (*init_alive_start)(struct il_priv *il);
/* check validity of rtc data address */
......
......@@ -555,11 +555,11 @@ static ssize_t il_dbgfs_interrupt_read(struct file *file,
"Rx command responses:\t\t %u\n",
il->isr_stats.rx);
for (cnt = 0; cnt < IL_CN_MAX; cnt++) {
if (il->isr_stats.rx_handlers[cnt] > 0)
if (il->isr_stats.handlers[cnt] > 0)
pos += scnprintf(buf + pos, bufsz - pos,
"\tRx handler[%36s]:\t\t %u\n",
il_get_cmd_string(cnt),
il->isr_stats.rx_handlers[cnt]);
il->isr_stats.handlers[cnt]);
}
pos += scnprintf(buf + pos, bufsz - pos, "Tx/FH interrupt:\t\t %u\n",
......
......@@ -813,7 +813,7 @@ struct isr_stats {
u32 ctkill;
u32 wakeup;
u32 rx;
u32 rx_handlers[IL_CN_MAX];
u32 handlers[IL_CN_MAX];
u32 tx;
u32 unhandled;
};
......@@ -968,7 +968,7 @@ struct il_priv {
enum ieee80211_band band;
int alloc_rxb_page;
void (*rx_handlers[IL_CN_MAX])(struct il_priv *il,
void (*handlers[IL_CN_MAX])(struct il_priv *il,
struct il_rx_buf *rxb);
struct ieee80211_supported_band bands[IEEE80211_NUM_BANDS];
......
......@@ -263,12 +263,12 @@ static void il_rx_scan_complete_notif(struct il_priv *il,
void il_setup_rx_scan_handlers(struct il_priv *il)
{
/* scan handlers */
il->rx_handlers[C_SCAN] = il_rx_reply_scan;
il->rx_handlers[N_SCAN_START] =
il->handlers[C_SCAN] = il_rx_reply_scan;
il->handlers[N_SCAN_START] =
il_rx_scan_start_notif;
il->rx_handlers[N_SCAN_RESULTS] =
il->handlers[N_SCAN_RESULTS] =
il_rx_scan_results_notif;
il->rx_handlers[N_SCAN_COMPLETE] =
il->handlers[N_SCAN_COMPLETE] =
il_rx_scan_complete_notif;
}
EXPORT_SYMBOL(il_setup_rx_scan_handlers);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment