Commit d0cad88d authored by David S. Miller's avatar David S. Miller

Merge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wireless

John Linville says:

Here are three more fixes that some of my developers are desperate to
see included in 3.4...

Johan Hedberg went to some length justifyng the inclusion of these two
Bluetooth fixes:

"The device_connected fix should be quite self-explanatory, but it's
actually a wider issue than just for keyboards. All profiles that do
incoming connection authorization (e.g. headsets) will break without it
with specific hardware. The reason it wasn't caught earlier is that it
only occurs with specific Bluetooth adapters.

As for the security level patch, this fixes L2CAP socket based security
level elevation during a connection. The HID profile needs this (for
keyboards) and it is the only way to achieve the security level
elevation when using the management interface to talk to the kernel
(hence the management enabling patch being the one that exposes this"

The rtlwifi fix addresses a regression related to firmware loading,
as described in kernel.org bug 43187.  It basically just moves a hunk
of code to a more appropriate place.
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parents 3ab77bf2 60374631
......@@ -1851,14 +1851,6 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev,
/*like read eeprom and so on */
rtlpriv->cfg->ops->read_eeprom_info(hw);
if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
err = -ENODEV;
goto fail3;
}
rtlpriv->cfg->ops->init_sw_leds(hw);
/*aspm */
rtl_pci_init_aspm(hw);
......@@ -1877,6 +1869,14 @@ int __devinit rtl_pci_probe(struct pci_dev *pdev,
goto fail3;
}
if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
err = -ENODEV;
goto fail3;
}
rtlpriv->cfg->ops->init_sw_leds(hw);
err = sysfs_create_group(&pdev->dev.kobj, &rtl_attribute_group);
if (err) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG,
......
......@@ -971,11 +971,6 @@ int __devinit rtl_usb_probe(struct usb_interface *intf,
rtlpriv->cfg->ops->read_chip_version(hw);
/*like read eeprom and so on */
rtlpriv->cfg->ops->read_eeprom_info(hw);
if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
goto error_out;
}
rtlpriv->cfg->ops->init_sw_leds(hw);
err = _rtl_usb_init(hw);
if (err)
goto error_out;
......@@ -987,6 +982,11 @@ int __devinit rtl_usb_probe(struct usb_interface *intf,
"Can't allocate sw for mac80211\n");
goto error_out;
}
if (rtlpriv->cfg->ops->init_sw_vars(hw)) {
RT_TRACE(rtlpriv, COMP_ERR, DBG_EMERG, "Can't init_sw_vars\n");
goto error_out;
}
rtlpriv->cfg->ops->init_sw_leds(hw);
return 0;
error_out:
......
......@@ -191,6 +191,7 @@ struct bt_sock {
struct list_head accept_q;
struct sock *parent;
u32 defer_setup;
bool suspended;
};
struct bt_sock_list {
......
......@@ -450,7 +450,7 @@ unsigned int bt_sock_poll(struct file *file, struct socket *sock, poll_table *wa
sk->sk_state == BT_CONFIG)
return mask;
if (sock_writeable(sk))
if (!bt_sk(sk)->suspended && sock_writeable(sk))
mask |= POLLOUT | POLLWRNORM | POLLWRBAND;
else
set_bit(SOCK_ASYNC_NOSPACE, &sk->sk_socket->flags);
......
......@@ -2784,6 +2784,14 @@ static inline void hci_acldata_packet(struct hci_dev *hdev, struct sk_buff *skb)
if (conn) {
hci_conn_enter_active_mode(conn, BT_POWER_FORCE_ACTIVE_OFF);
hci_dev_lock(hdev);
if (test_bit(HCI_MGMT, &hdev->dev_flags) &&
!test_and_set_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags))
mgmt_device_connected(hdev, &conn->dst, conn->type,
conn->dst_type, 0, NULL, 0,
conn->dev_class);
hci_dev_unlock(hdev);
/* Send to upper protocol */
l2cap_recv_acldata(conn, skb, flags);
return;
......
......@@ -2039,6 +2039,12 @@ static inline void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *
clear_bit(HCI_CONN_ENCRYPT_PEND, &conn->flags);
if (ev->status && conn->state == BT_CONNECTED) {
hci_acl_disconn(conn, 0x13);
hci_conn_put(conn);
goto unlock;
}
if (conn->state == BT_CONFIG) {
if (!ev->status)
conn->state = BT_CONNECTED;
......@@ -2049,6 +2055,7 @@ static inline void hci_encrypt_change_evt(struct hci_dev *hdev, struct sk_buff *
hci_encrypt_cfm(conn, ev->status, ev->encrypt);
}
unlock:
hci_dev_unlock(hdev);
}
......@@ -2102,7 +2109,7 @@ static inline void hci_remote_features_evt(struct hci_dev *hdev, struct sk_buff
goto unlock;
}
if (!ev->status) {
if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) {
struct hci_cp_remote_name_req cp;
memset(&cp, 0, sizeof(cp));
bacpy(&cp.bdaddr, &conn->dst);
......@@ -2871,7 +2878,7 @@ static inline void hci_remote_ext_features_evt(struct hci_dev *hdev, struct sk_b
if (conn->state != BT_CONFIG)
goto unlock;
if (!ev->status) {
if (!ev->status && !test_bit(HCI_CONN_MGMT_CONNECTED, &conn->flags)) {
struct hci_cp_remote_name_req cp;
memset(&cp, 0, sizeof(cp));
bacpy(&cp.bdaddr, &conn->dst);
......
......@@ -4589,6 +4589,11 @@ int l2cap_security_cfm(struct hci_conn *hcon, u8 status, u8 encrypt)
if (!status && (chan->state == BT_CONNECTED ||
chan->state == BT_CONFIG)) {
struct sock *sk = chan->sk;
bt_sk(sk)->suspended = false;
sk->sk_state_change(sk);
l2cap_check_encryption(chan, encrypt);
l2cap_chan_unlock(chan);
continue;
......
......@@ -592,10 +592,14 @@ static int l2cap_sock_setsockopt(struct socket *sock, int level, int optname, ch
sk->sk_state = BT_CONFIG;
chan->state = BT_CONFIG;
/* or for ACL link, under defer_setup time */
} else if (sk->sk_state == BT_CONNECT2 &&
bt_sk(sk)->defer_setup) {
err = l2cap_chan_check_security(chan);
/* or for ACL link */
} else if ((sk->sk_state == BT_CONNECT2 &&
bt_sk(sk)->defer_setup) ||
sk->sk_state == BT_CONNECTED) {
if (!l2cap_chan_check_security(chan))
bt_sk(sk)->suspended = true;
else
sk->sk_state_change(sk);
} else {
err = -EINVAL;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment