wl12xx: change WLVIF_FLAG_PSM name and remove WLVIF_FLAG_PSM_REQUESTED

WLVIF_FLAG_PSM turned to WLVIF_FLAG_IN_AUTO_PS which
marks that this vif is in AUTO PS.

WLVIF_FLAG_PSM_REQUESTED is not required as mac80211
calls op_config with CONF_PS after association.

wl12xx_config_vif() handling of CONF_PS was simplified
and cleaned up.
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>

drivers/net/wireless/wl12xx/debugfs.c

@@ -358,7 +358,7 @@ static ssize_t dynamic_ps_timeout_write(struct file *file,
 	 */
 
 	wl12xx_for_each_wlvif_sta(wl, wlvif) {
-		if (test_bit(WLVIF_FLAG_PSM, &wlvif->flags))
+		if (test_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags))
 			wl1271_ps_set_mode(wl, wlvif, STATION_AUTO_PS_MODE);
 	}
 

drivers/net/wireless/wl12xx/main.c

@@ -1715,9 +1715,7 @@ static int wl1271_op_start(struct ieee80211_hw *hw)
 	 * is added. That is where we will initialize the hardware.
 	 */
 
-	wl1271_error("wl12xx is in an ustable state (fw api update is "
-		     "taking place). skip this commit when bisecting");
-	return -EBUSY;
+	return 0;
 }
 
 static void wl1271_op_stop(struct ieee80211_hw *hw)
@@ -2460,29 +2458,29 @@ static int wl12xx_config_vif(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		}
 	}
 
-	if (conf->flags & IEEE80211_CONF_PS &&
-	    !test_bit(WLVIF_FLAG_PSM_REQUESTED, &wlvif->flags)) {
-		set_bit(WLVIF_FLAG_PSM_REQUESTED, &wlvif->flags);
+	if ((changed & IEEE80211_CONF_CHANGE_PS) && !is_ap) {
+
+		if ((conf->flags & IEEE80211_CONF_PS) &&
+		    test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags) &&
+		    !test_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags)) {
+
+			wl1271_debug(DEBUG_PSM, "auto ps enabled");
 
-		/*
-		 * We enter PSM only if we're already associated.
-		 * If we're not, we'll enter it when joining an SSID,
-		 * through the bss_info_changed() hook.
-		 */
-		if (test_bit(WLVIF_FLAG_STA_ASSOCIATED, &wlvif->flags)) {
-			wl1271_debug(DEBUG_PSM, "psm enabled");
 			ret = wl1271_ps_set_mode(wl, wlvif,
 						 STATION_AUTO_PS_MODE);
-		}
-	} else if (!(conf->flags & IEEE80211_CONF_PS) &&
-		   test_bit(WLVIF_FLAG_PSM_REQUESTED, &wlvif->flags)) {
-		wl1271_debug(DEBUG_PSM, "psm disabled");
+			if (ret < 0)
+				wl1271_warning("enter auto ps failed %d", ret);
 
-		clear_bit(WLVIF_FLAG_PSM_REQUESTED, &wlvif->flags);
+		} else if (!(conf->flags & IEEE80211_CONF_PS) &&
+			   test_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags)) {
+
+			wl1271_debug(DEBUG_PSM, "auto ps disabled");
 
-		if (test_bit(WLVIF_FLAG_PSM, &wlvif->flags))
 			ret = wl1271_ps_set_mode(wl, wlvif,
 						 STATION_ACTIVE_MODE);
+			if (ret < 0)
+				wl1271_warning("exit auto ps failed %d", ret);
+		}
 	}
 
 	if (conf->power_level != wlvif->power_level) {
@@ -3816,16 +3814,6 @@ static void wl1271_bss_info_changed_sta(struct wl1271 *wl,
 			if (ret < 0)
 				goto out;
 		}
-
-		/* If we want to go in PSM but we're not there yet */
-		if (test_bit(WLVIF_FLAG_PSM_REQUESTED, &wlvif->flags) &&
-		    !test_bit(WLVIF_FLAG_PSM, &wlvif->flags)) {
-
-			ret = wl1271_ps_set_mode(wl, wlvif,
-						 STATION_AUTO_PS_MODE);
-			if (ret < 0)
-				goto out;
-		}
 	}
 
 	/* Handle new association with HT. Do this after join. */

drivers/net/wireless/wl12xx/ps.c

@@ -56,7 +56,7 @@ void wl1271_elp_work(struct work_struct *work)
 		if (wlvif->bss_type == BSS_TYPE_AP_BSS)
 			goto out;
 
-		if (!test_bit(WLVIF_FLAG_PSM, &wlvif->flags) &&
+		if (!test_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags) &&
 		    test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags))
 			goto out;
 	}
@@ -84,7 +84,7 @@ void wl1271_ps_elp_sleep(struct wl1271 *wl)
 		if (wlvif->bss_type == BSS_TYPE_AP_BSS)
 			return;
 
-		if (!test_bit(WLVIF_FLAG_PSM, &wlvif->flags) &&
+		if (!test_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags) &&
 		    test_bit(WLVIF_FLAG_IN_USE, &wlvif->flags))
 			return;
 	}
@@ -180,7 +180,7 @@ int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		if (ret < 0)
 			return ret;
 
-		set_bit(WLVIF_FLAG_PSM, &wlvif->flags);
+		set_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags);
 
 		/* enable beacon early termination. Not relevant for 5GHz */
 		if (wlvif->band == IEEE80211_BAND_2GHZ) {
@@ -203,7 +203,7 @@ int wl1271_ps_set_mode(struct wl1271 *wl, struct wl12xx_vif *wlvif,
 		if (ret < 0)
 			return ret;
 
-		clear_bit(WLVIF_FLAG_PSM, &wlvif->flags);
+		clear_bit(WLVIF_FLAG_IN_AUTO_PS, &wlvif->flags);
 		break;
 	case STATION_POWER_SAVE_MODE:
 	default:

drivers/net/wireless/wl12xx/wl12xx.h

@@ -254,8 +254,7 @@ enum wl12xx_vif_flags {
 	WLVIF_FLAG_STA_ASSOCIATED,
 	WLVIF_FLAG_IBSS_JOINED,
 	WLVIF_FLAG_AP_STARTED,
-	WLVIF_FLAG_PSM,
-	WLVIF_FLAG_PSM_REQUESTED,
+	WLVIF_FLAG_IN_AUTO_PS,
 	WLVIF_FLAG_STA_STATE_SENT,
 	WLVIF_FLAG_RX_STREAMING_STARTED,
 	WLVIF_FLAG_PSPOLL_FAILURE,