drm/i915: Fix modeset locks in sanitize_watermarks()

We've added more internal things that use modeset locks and
thus we need to be prepared for intel_atomic_check() grabbing
more locks than what our initial drm_modeset_lock_all_ctx()
took. So we're missing the backoff handling here.

Also drm_atomic_helper_duplicate_state() works against us
by clearing state->acquire_ctx in anticipation of
drm_atomic_helper_commit_duplicated_state() being used to
commit the state.

We could probably just reset acquire_ctx back, but instead
let's just rewrite the whole thing without using either of
those "helpers". There's also no need to add any connectors
to the state here since we just want the new watermarks
which don't depend on connectors.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20200122204329.2477-1-ville.syrjala@linux.intel.comReviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drivers/gpu/drm/i915/display/intel_display.c

@@ -17455,6 +17455,30 @@ void intel_modeset_init_hw(struct drm_i915_private *i915)
 	i915->cdclk.logical = i915->cdclk.actual = i915->cdclk.hw;
 }
 
+static int sanitize_watermarks_add_affected(struct drm_atomic_state *state)
+{
+	struct drm_plane *plane;
+	struct drm_crtc *crtc;
+
+	drm_for_each_crtc(crtc, state->dev) {
+		struct drm_crtc_state *crtc_state;
+
+		crtc_state = drm_atomic_get_crtc_state(state, crtc);
+		if (IS_ERR(crtc_state))
+			return PTR_ERR(crtc_state);
+	}
+
+	drm_for_each_plane(plane, state->dev) {
+		struct drm_plane_state *plane_state;
+
+		plane_state = drm_atomic_get_plane_state(state, plane);
+		if (IS_ERR(plane_state))
+			return PTR_ERR(plane_state);
+	}
+
+	return 0;
+}
+
 /*
  * Calculate what we think the watermarks should be for the state we've read
  * out of the hardware and then immediately program those watermarks so that
@@ -17465,9 +17489,8 @@ void intel_modeset_init_hw(struct drm_i915_private *i915)
  * through the atomic check code to calculate new watermark values in the
  * state object.
  */
-static void sanitize_watermarks(struct drm_device *dev)
+static void sanitize_watermarks(struct drm_i915_private *dev_priv)
 {
-	struct drm_i915_private *dev_priv = to_i915(dev);
 	struct drm_atomic_state *state;
 	struct intel_atomic_state *intel_state;
 	struct intel_crtc *crtc;
@@ -17480,26 +17503,17 @@ static void sanitize_watermarks(struct drm_device *dev)
 	if (!dev_priv->display.optimize_watermarks)
 		return;
 
-	/*
-	 * We need to hold connection_mutex before calling duplicate_state so
-	 * that the connector loop is protected.
-	 */
-	drm_modeset_acquire_init(&ctx, 0);
-retry:
-	ret = drm_modeset_lock_all_ctx(dev, &ctx);
-	if (ret == -EDEADLK) {
-		drm_modeset_backoff(&ctx);
-		goto retry;
-	} else if (WARN_ON(ret)) {
-		goto fail;
-	}
-
-	state = drm_atomic_helper_duplicate_state(dev, &ctx);
-	if (WARN_ON(IS_ERR(state)))
-		goto fail;
+	state = drm_atomic_state_alloc(&dev_priv->drm);
+	if (WARN_ON(!state))
+		return;
 
 	intel_state = to_intel_atomic_state(state);
 
+	drm_modeset_acquire_init(&ctx, 0);
+
+retry:
+	state->acquire_ctx = &ctx;
+
 	/*
 	 * Hardware readout is the only time we don't want to calculate
 	 * intermediate watermarks (since we don't trust the current
@@ -17508,22 +17522,13 @@ static void sanitize_watermarks(struct drm_device *dev)
 	if (!HAS_GMCH(dev_priv))
 		intel_state->skip_intermediate_wm = true;
 
-	ret = intel_atomic_check(dev, state);
-	if (ret) {
-		/*
-		 * If we fail here, it means that the hardware appears to be
-		 * programmed in a way that shouldn't be possible, given our
-		 * understanding of watermark requirements.  This might mean a
-		 * mistake in the hardware readout code or a mistake in the
-		 * watermark calculations for a given platform.  Raise a WARN
-		 * so that this is noticeable.
-		 *
-		 * If this actually happens, we'll have to just leave the
-		 * BIOS-programmed watermarks untouched and hope for the best.
-		 */
-		WARN(true, "Could not determine valid watermarks for inherited state\n");
-		goto put_state;
-	}
+	ret = sanitize_watermarks_add_affected(state);
+	if (ret)
+		goto fail;
+
+	ret = intel_atomic_check(&dev_priv->drm, state);
+	if (ret)
+		goto fail;
 
 	/* Write calculated watermark values back */
 	for_each_new_intel_crtc_in_state(intel_state, crtc, crtc_state, i) {
@@ -17533,9 +17538,28 @@ static void sanitize_watermarks(struct drm_device *dev)
 		to_intel_crtc_state(crtc->base.state)->wm = crtc_state->wm;
 	}
 
-put_state:
-	drm_atomic_state_put(state);
 fail:
+	if (ret == -EDEADLK) {
+		drm_atomic_state_clear(state);
+		drm_modeset_backoff(&ctx);
+		goto retry;
+	}
+
+	/*
+	 * If we fail here, it means that the hardware appears to be
+	 * programmed in a way that shouldn't be possible, given our
+	 * understanding of watermark requirements.  This might mean a
+	 * mistake in the hardware readout code or a mistake in the
+	 * watermark calculations for a given platform.  Raise a WARN
+	 * so that this is noticeable.
+	 *
+	 * If this actually happens, we'll have to just leave the
+	 * BIOS-programmed watermarks untouched and hope for the best.
+	 */
+	WARN(ret, "Could not determine valid watermarks for inherited state\n");
+
+	drm_atomic_state_put(state);
+
 	drm_modeset_drop_locks(&ctx);
 	drm_modeset_acquire_fini(&ctx);
 }
@@ -17751,7 +17775,7 @@ int intel_modeset_init(struct drm_i915_private *i915)
 	 * since the watermark calculation done here will use pstate->fb.
 	 */
 	if (!HAS_GMCH(i915))
-		sanitize_watermarks(dev);
+		sanitize_watermarks(i915);
 
 	/*
 	 * Force all active planes to recompute their states. So that on