tpm tis: Do not print timeout messages twice

The tis driver does a tpm_get_timeouts out side of tpm_chip_register,
and tpm_get_timeouts can print a message, resulting in two prints, eg:

 tpm tpm0: [Hardware Error]: Adjusting reported timeouts: A 10000->750000us B 10000->2000000us C 10000->750000us D 10000->750000us

Keep track and prevent tpm_get_timeouts from running a second time, and
clarify the purpose of the call in tpm_tis_core to only be connected to
irq testing.
Signed-off-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Reviewed-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko.sakkinen@linux.intel.com>

drivers/char/tpm/tpm-interface.c

@@ -501,6 +501,9 @@ int tpm_get_timeouts(struct tpm_chip *chip)
 	unsigned long old_timeout[4];
 	ssize_t rc;
 
+	if (chip->flags & TPM_CHIP_FLAG_HAVE_TIMEOUTS)
+		return 0;
+
 	if (chip->flags & TPM_CHIP_FLAG_TPM2) {
 		/* Fixed timeouts for TPM2 */
 		chip->timeout_a = msecs_to_jiffies(TPM2_TIMEOUT_A);
@@ -513,6 +516,8 @@ int tpm_get_timeouts(struct tpm_chip *chip)
 		    msecs_to_jiffies(TPM2_DURATION_MEDIUM);
 		chip->duration[TPM_LONG] =
 		    msecs_to_jiffies(TPM2_DURATION_LONG);
+
+		chip->flags |= TPM_CHIP_FLAG_HAVE_TIMEOUTS;
 		return 0;
 	}
 
@@ -596,6 +601,8 @@ int tpm_get_timeouts(struct tpm_chip *chip)
 		chip->duration_adjusted = true;
 		dev_info(&chip->dev, "Adjusting TPM timeout parameters.");
 	}
+
+	chip->flags |= TPM_CHIP_FLAG_HAVE_TIMEOUTS;
 	return 0;
 }
 EXPORT_SYMBOL_GPL(tpm_get_timeouts);

drivers/char/tpm/tpm.h

@@ -143,6 +143,7 @@ enum tpm_chip_flags {
 	TPM_CHIP_FLAG_TPM2		= BIT(1),
 	TPM_CHIP_FLAG_IRQ		= BIT(2),
 	TPM_CHIP_FLAG_VIRTUAL		= BIT(3),
+	TPM_CHIP_FLAG_HAVE_TIMEOUTS	= BIT(4),
 };
 
 struct tpm_chip {

drivers/char/tpm/tpm_tis_core.c

@@ -777,20 +777,20 @@ int tpm_tis_core_init(struct device *dev, struct tpm_tis_data *priv, int irq,
 	if (intfcaps & TPM_INTF_DATA_AVAIL_INT)
 		dev_dbg(dev, "\tData Avail Int Support\n");
 
-	/* Very early on issue a command to the TPM in polling mode to make
-	 * sure it works. May as well use that command to set the proper
-	 *  timeouts for the driver.
-	 */
-	if (tpm_get_timeouts(chip)) {
-		dev_err(dev, "Could not get TPM timeouts and durations\n");
-		rc = -ENODEV;
-		goto out_err;
-	}
-
 	/* INTERRUPT Setup */
 	init_waitqueue_head(&priv->read_queue);
 	init_waitqueue_head(&priv->int_queue);
 	if (irq != -1) {
+		/* Before doing irq testing issue a command to the TPM in polling mode
+		 * to make sure it works. May as well use that command to set the
+		 * proper timeouts for the driver.
+		 */
+		if (tpm_get_timeouts(chip)) {
+			dev_err(dev, "Could not get TPM timeouts and durations\n");
+			rc = -ENODEV;
+			goto out_err;
+		}
+
 		if (irq) {
 			tpm_tis_probe_irq_single(chip, intmask, IRQF_SHARED,
 						 irq);