Commit d2daa2f7 authored by Shawn Guo's avatar Shawn Guo

ARM: dts: imx: add initial imx6sx-sdb board support

Add initial imx6sx-sdb board support with limited devices enabled.
Signed-off-by: default avatarAnson Huang <b20788@freescale.com>
Signed-off-by: default avatarShawn Guo <shawn.guo@freescale.com>
parent b1d17f68
...@@ -216,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \ ...@@ -216,6 +216,7 @@ dtb-$(CONFIG_ARCH_MXC) += \
imx6q-udoo.dtb \ imx6q-udoo.dtb \
imx6q-wandboard.dtb \ imx6q-wandboard.dtb \
imx6sl-evk.dtb \ imx6sl-evk.dtb \
imx6sx-sdb.dtb \
vf610-colibri.dtb \ vf610-colibri.dtb \
vf610-cosmic.dtb \ vf610-cosmic.dtb \
vf610-twr.dtb vf610-twr.dtb
......
/*
* Copyright (C) 2014 Freescale Semiconductor, Inc.
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
/dts-v1/;
#include "imx6sx.dtsi"
/ {
model = "Freescale i.MX6 SoloX SDB Board";
compatible = "fsl,imx6sx-sdb", "fsl,imx6sx";
chosen {
stdout-path = &uart1;
};
memory {
reg = <0x80000000 0x40000000>;
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
vcc_sd3: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_vcc_sd3>;
regulator-name = "VCC_SD3";
regulator-min-microvolt = <3000000>;
regulator-max-microvolt = <3000000>;
gpio = <&gpio2 11 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
};
};
&fec1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_enet1>;
phy-mode = "rgmii";
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
status = "okay";
};
&uart5 { /* for bluetooth */
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart5>;
fsl,uart-has-rtscts;
status = "okay";
};
&usdhc2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc2>;
non-removable;
no-1-8-v;
keep-power-in-suspend;
enable-sdio-wakeup;
status = "okay";
};
&usdhc3 {
pinctrl-names = "default", "state_100mhz", "state_200mhz";
pinctrl-0 = <&pinctrl_usdhc3>;
pinctrl-1 = <&pinctrl_usdhc3_100mhz>;
pinctrl-2 = <&pinctrl_usdhc3_200mhz>;
bus-width = <8>;
cd-gpios = <&gpio2 10 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio2 15 GPIO_ACTIVE_HIGH>;
keep-power-in-suspend;
enable-sdio-wakeup;
vmmc-supply = <&vcc_sd3>;
status = "okay";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
cd-gpios = <&gpio6 21 GPIO_ACTIVE_HIGH>;
wp-gpios = <&gpio6 20 GPIO_ACTIVE_HIGH>;
status = "okay";
};
&iomuxc {
imx6x-sdb {
pinctrl_enet1: enet1grp {
fsl,pins = <
MX6SX_PAD_ENET1_MDIO__ENET1_MDIO 0xa0b1
MX6SX_PAD_ENET1_MDC__ENET1_MDC 0xa0b1
MX6SX_PAD_RGMII1_TXC__ENET1_RGMII_TXC 0xa0b1
MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0 0xa0b1
MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1 0xa0b1
MX6SX_PAD_RGMII1_TD2__ENET1_TX_DATA_2 0xa0b1
MX6SX_PAD_RGMII1_TD3__ENET1_TX_DATA_3 0xa0b1
MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN 0xa0b1
MX6SX_PAD_RGMII1_RXC__ENET1_RX_CLK 0x3081
MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0 0x3081
MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1 0x3081
MX6SX_PAD_RGMII1_RD2__ENET1_RX_DATA_2 0x3081
MX6SX_PAD_RGMII1_RD3__ENET1_RX_DATA_3 0x3081
MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN 0x3081
>;
};
pinctrl_vcc_sd3: vccsd3grp {
fsl,pins = <
MX6SX_PAD_KEY_COL1__GPIO2_IO_11 0x17059
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6SX_PAD_GPIO1_IO04__UART1_TX 0x1b0b1
MX6SX_PAD_GPIO1_IO05__UART1_RX 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6SX_PAD_KEY_ROW3__UART5_RX 0x1b0b1
MX6SX_PAD_KEY_COL3__UART5_TX 0x1b0b1
MX6SX_PAD_KEY_ROW2__UART5_CTS_B 0x1b0b1
MX6SX_PAD_KEY_COL2__UART5_RTS_B 0x1b0b1
>;
};
pinctrl_usdhc2: usdhc2grp {
fsl,pins = <
MX6SX_PAD_SD2_CMD__USDHC2_CMD 0x17059
MX6SX_PAD_SD2_CLK__USDHC2_CLK 0x10059
MX6SX_PAD_SD2_DATA0__USDHC2_DATA0 0x17059
MX6SX_PAD_SD2_DATA1__USDHC2_DATA1 0x17059
MX6SX_PAD_SD2_DATA2__USDHC2_DATA2 0x17059
MX6SX_PAD_SD2_DATA3__USDHC2_DATA3 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x17059
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x10059
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x17059
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x17059
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x17059
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x17059
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x17059
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x17059
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x17059
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x17059
MX6SX_PAD_KEY_COL0__GPIO2_IO_10 0x17059 /* CD */
MX6SX_PAD_KEY_ROW0__GPIO2_IO_15 0x17059 /* WP */
>;
};
pinctrl_usdhc3_100mhz: usdhc3grp-100mhz {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170b9
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100b9
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170b9
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170b9
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170b9
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170b9
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170b9
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170b9
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170b9
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170b9
>;
};
pinctrl_usdhc3_200mhz: usdhc3grp-200mhz {
fsl,pins = <
MX6SX_PAD_SD3_CMD__USDHC3_CMD 0x170f9
MX6SX_PAD_SD3_CLK__USDHC3_CLK 0x100f9
MX6SX_PAD_SD3_DATA0__USDHC3_DATA0 0x170f9
MX6SX_PAD_SD3_DATA1__USDHC3_DATA1 0x170f9
MX6SX_PAD_SD3_DATA2__USDHC3_DATA2 0x170f9
MX6SX_PAD_SD3_DATA3__USDHC3_DATA3 0x170f9
MX6SX_PAD_SD3_DATA4__USDHC3_DATA4 0x170f9
MX6SX_PAD_SD3_DATA5__USDHC3_DATA5 0x170f9
MX6SX_PAD_SD3_DATA6__USDHC3_DATA6 0x170f9
MX6SX_PAD_SD3_DATA7__USDHC3_DATA7 0x170f9
>;
};
pinctrl_usdhc4: usdhc4grp {
fsl,pins = <
MX6SX_PAD_SD4_CMD__USDHC4_CMD 0x17059
MX6SX_PAD_SD4_CLK__USDHC4_CLK 0x10059
MX6SX_PAD_SD4_DATA0__USDHC4_DATA0 0x17059
MX6SX_PAD_SD4_DATA1__USDHC4_DATA1 0x17059
MX6SX_PAD_SD4_DATA2__USDHC4_DATA2 0x17059
MX6SX_PAD_SD4_DATA3__USDHC4_DATA3 0x17059
MX6SX_PAD_SD4_DATA7__GPIO6_IO_21 0x17059 /* CD */
MX6SX_PAD_SD4_DATA6__GPIO6_IO_20 0x17059 /* WP */
>;
};
};
};
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment