Commit d2deebab authored by Tang Yuantian's avatar Tang Yuantian Committed by Wim Van Sebroeck

booke/watchdog: refine and clean up the codes

Basically, this patch does the following:
1. Move the codes of parsing boot parameters from setup-common.c
   to driver. In this way, code reader can know directly that
   there are boot parameters that can change the timeout.
2. Make boot parameter 'booke_wdt_period' effective.
   currently, when driver is loaded, default timeout is always
   being used in stead of booke_wdt_period.
3. Wrap up the watchdog timeout in device struct and clean up
   unnecessary codes.
Signed-off-by: default avatarTang Yuantian <yuantian.tang@freescale.com>
Acked-by: default avatarScott Wood <scottwood@freescale.com>
Reviewed-by: default avatarLi Yang <leoli@freescale.com>
Reviewed-by: default avatarGuenter Roeck <linux@roeck-us.net>
Signed-off-by: default avatarWim Van Sebroeck <wim@iguana.be>
parent ec2e32ca
......@@ -718,33 +718,6 @@ static int powerpc_debugfs_init(void)
arch_initcall(powerpc_debugfs_init);
#endif
#ifdef CONFIG_BOOKE_WDT
extern u32 booke_wdt_enabled;
extern u32 booke_wdt_period;
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period(char *p)
{
unsigned long ret;
if (p) {
if (!kstrtol(p, 0, &ret))
booke_wdt_period = ret;
}
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#endif /* CONFIG_BOOKE_WDT */
void ppc_printk_progress(char *s, unsigned short hex)
{
pr_info("%s\n", s);
......
......@@ -41,6 +41,28 @@ u32 booke_wdt_period = CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT;
#define WDTP_MASK (TCR_WP_MASK)
#endif
/* Checks wdt=x and wdt_period=xx command-line option */
notrace int __init early_parse_wdt(char *p)
{
if (p && strncmp(p, "0", 1) != 0)
booke_wdt_enabled = 1;
return 0;
}
early_param("wdt", early_parse_wdt);
int __init early_parse_wdt_period(char *p)
{
unsigned long ret;
if (p) {
if (!kstrtol(p, 0, &ret))
booke_wdt_period = ret;
}
return 0;
}
early_param("wdt_period", early_parse_wdt_period);
#ifdef CONFIG_PPC_FSL_BOOK3E
/* For the specified period, determine the number of seconds
......@@ -103,17 +125,18 @@ static unsigned int sec_to_period(unsigned int secs)
static void __booke_wdt_set(void *data)
{
u32 val;
struct watchdog_device *wdog = data;
val = mfspr(SPRN_TCR);
val &= ~WDTP_MASK;
val |= WDTP(booke_wdt_period);
val |= WDTP(sec_to_period(wdog->timeout));
mtspr(SPRN_TCR, val);
}
static void booke_wdt_set(void)
static void booke_wdt_set(void *data)
{
on_each_cpu(__booke_wdt_set, NULL, 0);
on_each_cpu(__booke_wdt_set, data, 0);
}
static void __booke_wdt_ping(void *data)
......@@ -131,12 +154,13 @@ static int booke_wdt_ping(struct watchdog_device *wdog)
static void __booke_wdt_enable(void *data)
{
u32 val;
struct watchdog_device *wdog = data;
/* clear status before enabling watchdog */
__booke_wdt_ping(NULL);
val = mfspr(SPRN_TCR);
val &= ~WDTP_MASK;
val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(booke_wdt_period));
val |= (TCR_WIE|TCR_WRC(WRC_CHIP)|WDTP(sec_to_period(wdog->timeout)));
mtspr(SPRN_TCR, val);
}
......@@ -162,25 +186,17 @@ static void __booke_wdt_disable(void *data)
}
static void __booke_wdt_start(struct watchdog_device *wdog)
static int booke_wdt_start(struct watchdog_device *wdog)
{
on_each_cpu(__booke_wdt_enable, NULL, 0);
on_each_cpu(__booke_wdt_enable, wdog, 0);
pr_debug("watchdog enabled (timeout = %u sec)\n", wdog->timeout);
}
static int booke_wdt_start(struct watchdog_device *wdog)
{
if (booke_wdt_enabled == 0) {
booke_wdt_enabled = 1;
__booke_wdt_start(wdog);
}
return 0;
}
static int booke_wdt_stop(struct watchdog_device *wdog)
{
on_each_cpu(__booke_wdt_disable, NULL, 0);
booke_wdt_enabled = 0;
pr_debug("watchdog disabled\n");
return 0;
......@@ -191,9 +207,8 @@ static int booke_wdt_set_timeout(struct watchdog_device *wdt_dev,
{
if (timeout > MAX_WDT_TIMEOUT)
return -EINVAL;
booke_wdt_period = sec_to_period(timeout);
wdt_dev->timeout = timeout;
booke_wdt_set();
booke_wdt_set(wdt_dev);
return 0;
}
......@@ -231,10 +246,10 @@ static int __init booke_wdt_init(void)
pr_info("powerpc book-e watchdog driver loaded\n");
booke_wdt_info.firmware_version = cur_cpu_spec->pvr_value;
booke_wdt_set_timeout(&booke_wdt_dev,
period_to_sec(CONFIG_BOOKE_WDT_DEFAULT_TIMEOUT));
period_to_sec(booke_wdt_period));
watchdog_set_nowayout(&booke_wdt_dev, nowayout);
if (booke_wdt_enabled)
__booke_wdt_start(&booke_wdt_dev);
booke_wdt_start(&booke_wdt_dev);
ret = watchdog_register_device(&booke_wdt_dev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment