Commit d35d473c authored by Ralf Baechle's avatar Ralf Baechle

[MIPS] Fix the crime against humanity that mipsIRQ.S is.

Signed-off-by: default avatarRalf Baechle <ralf@linux-mips.org>
parent fde3505c
......@@ -16,5 +16,5 @@
# 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
#
obj-y := atlas_int.o atlas_setup.o
obj-y := atlas_int.o atlas-irq.o atlas_setup.o
obj-$(CONFIG_KGDB) += atlas_gdb.o
......@@ -2,8 +2,6 @@
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
......@@ -17,10 +15,7 @@
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Interrupt exception dispatch code.
*
*/
#include <linux/config.h>
......@@ -28,33 +23,9 @@
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#ifdef CONFIG_MIPS_ATLAS
#include <asm/mips-boards/atlasint.h>
#define CASCADE_IRQ MIPSCPU_INT_ATLAS
#define CASCADE_DISPATCH atlas_hw0_irqdispatch
#endif
#ifdef CONFIG_MIPS_MALTA
#include <asm/mips-boards/maltaint.h>
#define CASCADE_IRQ MIPSCPU_INT_I8259A
#define CASCADE_DISPATCH malta_hw0_irqdispatch
#endif
#ifdef CONFIG_MIPS_SEAD
#include <asm/mips-boards/seadint.h>
#endif
/* A lot of complication here is taken away because:
*
* 1) We handle one interrupt and return, sitting in a loop and moving across
* all the pending IRQ bits in the cause register is _NOT_ the answer, the
* common case is one pending IRQ so optimize in that direction.
*
* 2) We need not check against bits in the status register IRQ mask, that
* would make this routine slow as hell.
*
* 3) Linux only thinks in terms of all IRQs on or all IRQs off, nothing in
* between like BSD spl() brain-damage.
*
/*
* Furthermore, the IRQs on the MIPS board look basically (barring software
* IRQs which we don't use at all and all external interrupt sources are
* combined together on hardware interrupt 0 (MIPS IRQ 2)) like:
......@@ -127,31 +98,23 @@
# sll s0, t0
#endif
#ifdef CASCADE_IRQ
li a1, CASCADE_IRQ
li a1, MIPSCPU_INT_ATLAS
bne a0, a1, 1f
addu a0, MIPSCPU_INT_BASE
jal CASCADE_DISPATCH
jal atlas_hw0_irqdispatch
move a0, sp
j ret_from_irq
nop
1:
#else
addu a0, MIPSCPU_INT_BASE
#endif
jal do_IRQ
1: jal do_IRQ
move a1, sp
j ret_from_irq
nop
spurious:
jal spurious_interrupt
nop
j ret_from_irq
j spurious_interrupt
nop
END(mipsIRQ)
......@@ -18,8 +18,8 @@
# Makefile for the MIPS boards generic routines under Linux.
#
obj-y := mipsIRQ.o reset.o display.o init.o memory.o \
printf.o cmdline.o time.o
obj-y := reset.o display.o init.o memory.o printf.o \
cmdline.o time.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_KGDB) += gdb_hook.o
......
......@@ -19,4 +19,4 @@
# under Linux.
#
obj-y := malta_int.o malta_setup.o
obj-y := malta_int.o malta-irq.o malta_setup.o
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Interrupt exception dispatch code.
*
*/
#include <linux/config.h>
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/mips-boards/maltaint.h>
/*
* IRQs on the Malta board look basically (barring software IRQs which we
* don't use at all and all external interrupt sources are combined together
* on hardware interrupt 0 (MIPS IRQ 2)) like:
*
* MIPS IRQ Source
* -------- ------
* 0 Software (ignored)
* 1 Software (ignored)
* 2 Combined hardware interrupt (hw0)
* 3 Hardware (ignored)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
* 6 Hardware (ignored)
* 7 R4k timer (what we use)
*
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
* Lowest ---- Combined hardware interrupt
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
*/
.text
.set noreorder
.set noat
.align 5
NESTED(mipsIRQ, PT_SIZE, sp)
SAVE_ALL
CLI
.set at
mfc0 s0, CP0_CAUSE # get irq bits
mfc0 s1, CP0_STATUS # get irq mask
andi s0, ST0_IM # CAUSE.CE may be non-zero!
and s0, s1
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
.set mips32
clz a0, s0
.set mips0
negu a0
addu a0, 31-CAUSEB_IP
bltz a0, spurious
#else
beqz s0, spurious
li a0, 7
and t0, s0, 0xf000
sltiu t0, t0, 1
sll t0, 2
subu a0, t0
sll s0, t0
and t0, s0, 0xc000
sltiu t0, t0, 1
sll t0, 1
subu a0, t0
sll s0, t0
and t0, s0, 0x8000
sltiu t0, t0, 1
# sll t0, 0
subu a0, t0
# sll s0, t0
#endif
li a1, MIPSCPU_INT_I8259A
bne a0, a1, 1f
addu a0, MIPSCPU_INT_BASE
jal malta_hw0_irqdispatch
move a0, sp
j ret_from_irq
nop
1:
jal do_IRQ
move a1, sp
j ret_from_irq
nop
spurious:
j spurious_interrupt
nop
END(mipsIRQ)
......@@ -23,4 +23,4 @@
# under Linux.
#
obj-y := sead_int.o sead_setup.o
obj-y := sead_int.o sead-irq.o sead_setup.o
/*
* Carsten Langgaard, carstenl@mips.com
* Copyright (C) 1999, 2000 MIPS Technologies, Inc. All rights reserved.
*
* ########################################################################
*
* This program is free software; you can distribute it and/or modify it
* under the terms of the GNU General Public License (Version 2) as
* published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
* for more details.
*
* You should have received a copy of the GNU General Public License along
* with this program; if not, write to the Free Software Foundation, Inc.,
* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
*
* ########################################################################
*
* Interrupt exception dispatch code.
*
*/
#include <linux/config.h>
#include <asm/asm.h>
#include <asm/mipsregs.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>
#include <asm/mips-boards/seadint.h>
/*
* IRQs on the SEAD board look basically are combined together on hardware
* interrupt 0 (MIPS IRQ 2)) like:
*
* MIPS IRQ Source
* -------- ------
* 0 Software (ignored)
* 1 Software (ignored)
* 2 UART0 (hw0)
* 3 UART1 (hw1)
* 4 Hardware (ignored)
* 5 Hardware (ignored)
* 6 Hardware (ignored)
* 7 R4k timer (what we use)
*
* We handle the IRQ according to _our_ priority which is:
*
* Highest ---- R4k Timer
* Lowest ---- Combined hardware interrupt
*
* then we just return, if multiple IRQs are pending then we will just take
* another exception, big deal.
*/
.text
.set noreorder
.set noat
.align 5
NESTED(mipsIRQ, PT_SIZE, sp)
SAVE_ALL
CLI
.set at
mfc0 s0, CP0_CAUSE # get irq bits
mfc0 s1, CP0_STATUS # get irq mask
andi s0, ST0_IM # CAUSE.CE may be non-zero!
and s0, s1
#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
.set mips32
clz a0, s0
.set mips0
negu a0
addu a0, 31-CAUSEB_IP
bltz a0, spurious
#else
beqz s0, spurious
li a0, 7
and t0, s0, 0xf000
sltiu t0, t0, 1
sll t0, 2
subu a0, t0
sll s0, t0
and t0, s0, 0xc000
sltiu t0, t0, 1
sll t0, 1
subu a0, t0
sll s0, t0
and t0, s0, 0x8000
sltiu t0, t0, 1
# sll t0, 0
subu a0, t0
# sll s0, t0
#endif
addu a0, MIPSCPU_INT_BASE
jal do_IRQ
move a1, sp
j ret_from_irq
nop
spurious:
j spurious_interrupt
nop
END(mipsIRQ)
......@@ -33,12 +33,28 @@
#define ATLAS_RTC_ADR_REG 0x1f000800
#define ATLAS_RTC_DAT_REG 0x1f000808
/*
* Atlas interrupt controller register base.
*/
#define ATLAS_ICTRL_REGS_BASE 0x1f000000
/*
* Atlas registers are memory mapped on 64-bit aligned boundaries and
* only word access are allowed.
*/
struct atlas_ictrl_regs {
volatile unsigned int intraw;
int dummy1;
volatile unsigned int intseten;
int dummy2;
volatile unsigned int intrsten;
int dummy3;
volatile unsigned int intenable;
int dummy4;
volatile unsigned int intstatus;
int dummy5;
};
/*
* Atlas UART register base.
*/
......
......@@ -62,23 +62,4 @@
#define ATLASINT_RES31 (ATLASINT_BASE+31)
#define ATLASINT_END (ATLASINT_BASE+31)
/*
* Atlas registers are memory mapped on 64-bit aligned boundaries and
* only word access are allowed.
*/
struct atlas_ictrl_regs {
volatile unsigned int intraw;
int dummy1;
volatile unsigned int intseten;
int dummy2;
volatile unsigned int intrsten;
int dummy3;
volatile unsigned int intenable;
int dummy4;
volatile unsigned int intstatus;
int dummy5;
};
extern void atlasint_init(void);
#endif /* !(_MIPS_ATLASINT_H) */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment