Commit d3829fad authored by Devin Heitmueller's avatar Devin Heitmueller Committed by Mauro Carvalho Chehab

[media] em28xx: convert to videobuf2

This patch converts the em28xx driver over to videobuf2.  It is
likely that em28xx_fh can go away entirely, but that will come in
a separate patch.

[mchehab@redhat.com: fix a non-trivial merge conflict with some VBI
 patches; CodingStyle fixes]
Signed-off-by: default avatarDevin Heitmueller <dheitmueller@kernellabs.com>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent 2a221d34
......@@ -3,7 +3,7 @@ config VIDEO_EM28XX
depends on VIDEO_DEV && I2C
select VIDEO_TUNER
select VIDEO_TVEEPROM
select VIDEOBUF_VMALLOC
select VIDEOBUF2_VMALLOC
select VIDEO_SAA711X if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_TVP5150 if MEDIA_SUBDRV_AUTOSELECT
select VIDEO_MSP3400 if MEDIA_SUBDRV_AUTOSELECT
......@@ -48,7 +48,6 @@ config VIDEO_EM28XX_DVB
select DVB_S5H1409 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT
select MEDIA_TUNER_TDA18271 if MEDIA_SUBDRV_AUTOSELECT
select VIDEOBUF_DVB
---help---
This adds support for DVB cards based on the
Empiatech em28xx chips.
......
......@@ -57,7 +57,7 @@ module_param(disable_usb_speed_check, int, 0444);
MODULE_PARM_DESC(disable_usb_speed_check,
"override min bandwidth requirement of 480M bps");
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = UNSET };
static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U };
module_param_array(card, int, NULL, 0444);
MODULE_PARM_DESC(card, "card type");
......@@ -2965,6 +2965,8 @@ static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev,
const char *chip_name = default_chip_name;
dev->udev = udev;
mutex_init(&dev->vb_queue_lock);
mutex_init(&dev->vb_vbi_queue_lock);
mutex_init(&dev->ctrl_urb_lock);
spin_lock_init(&dev->slock);
......@@ -3411,6 +3413,9 @@ static int em28xx_usb_probe(struct usb_interface *interface,
/* save our data pointer in this interface device */
usb_set_intfdata(interface, dev);
/* initialize videobuf2 stuff */
em28xx_vb2_setup(dev);
/* allocate device struct */
mutex_init(&dev->lock);
mutex_lock(&dev->lock);
......
......@@ -27,7 +27,9 @@
#include "em28xx.h"
#include <media/v4l2-common.h>
#include <media/videobuf-vmalloc.h>
#include <dvb_demux.h>
#include <dvb_net.h>
#include <dmxdev.h>
#include <media/tuner.h>
#include "tuner-simple.h"
#include <linux/gpio.h>
......
......@@ -41,105 +41,72 @@ MODULE_PARM_DESC(vbi_debug, "enable debug messages [vbi]");
/* ------------------------------------------------------------------ */
static void
free_buffer(struct videobuf_queue *vq, struct em28xx_buffer *buf)
static int vbi_queue_setup(struct vb2_queue *vq, const struct v4l2_format *fmt,
unsigned int *nbuffers, unsigned int *nplanes,
unsigned int sizes[], void *alloc_ctxs[])
{
struct em28xx_fh *fh = vq->priv_data;
struct em28xx *dev = fh->dev;
unsigned long flags = 0;
if (in_interrupt())
BUG();
/* We used to wait for the buffer to finish here, but this didn't work
because, as we were keeping the state as VIDEOBUF_QUEUED,
videobuf_queue_cancel marked it as finished for us.
(Also, it could wedge forever if the hardware was misconfigured.)
This should be safe; by the time we get here, the buffer isn't
queued anymore. If we ever start marking the buffers as
VIDEOBUF_ACTIVE, it won't be, though.
*/
spin_lock_irqsave(&dev->slock, flags);
if (dev->usb_ctl.vbi_buf == buf)
dev->usb_ctl.vbi_buf = NULL;
spin_unlock_irqrestore(&dev->slock, flags);
struct em28xx *dev = vb2_get_drv_priv(vq);
unsigned long size;
videobuf_vmalloc_free(&buf->vb);
buf->vb.state = VIDEOBUF_NEEDS_INIT;
}
if (fmt)
size = fmt->fmt.pix.sizeimage;
else
size = dev->vbi_width * dev->vbi_height * 2;
static int
vbi_setup(struct videobuf_queue *q, unsigned int *count, unsigned int *size)
{
struct em28xx_fh *fh = q->priv_data;
struct em28xx *dev = fh->dev;
if (0 == *nbuffers)
*nbuffers = 32;
if (*nbuffers < 2)
*nbuffers = 2;
if (*nbuffers > 32)
*nbuffers = 32;
*size = dev->vbi_width * dev->vbi_height * 2;
*nplanes = 1;
sizes[0] = size;
if (0 == *count)
*count = vbibufs;
if (*count < 2)
*count = 2;
if (*count > 32)
*count = 32;
return 0;
}
static int
vbi_prepare(struct videobuf_queue *q, struct videobuf_buffer *vb,
enum v4l2_field field)
static int vbi_buffer_prepare(struct vb2_buffer *vb)
{
struct em28xx_fh *fh = q->priv_data;
struct em28xx *dev = fh->dev;
struct em28xx *dev = vb2_get_drv_priv(vb->vb2_queue);
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
int rc = 0;
unsigned long size;
buf->vb.size = dev->vbi_width * dev->vbi_height * 2;
size = dev->vbi_width * dev->vbi_height * 2;
if (0 != buf->vb.baddr && buf->vb.bsize < buf->vb.size)
if (vb2_plane_size(vb, 0) < size) {
printk(KERN_INFO "%s data will not fit into plane (%lu < %lu)\n",
__func__, vb2_plane_size(vb, 0), size);
return -EINVAL;
buf->vb.width = dev->vbi_width;
buf->vb.height = dev->vbi_height;
buf->vb.field = field;
if (VIDEOBUF_NEEDS_INIT == buf->vb.state) {
rc = videobuf_iolock(q, &buf->vb, NULL);
if (rc < 0)
goto fail;
}
vb2_set_plane_payload(&buf->vb, 0, size);
buf->vb.state = VIDEOBUF_PREPARED;
return 0;
fail:
free_buffer(q, buf);
return rc;
}
static void
vbi_queue(struct videobuf_queue *vq, struct videobuf_buffer *vb)
{
struct em28xx_buffer *buf = container_of(vb,
struct em28xx_buffer,
vb);
struct em28xx_fh *fh = vq->priv_data;
struct em28xx *dev = fh->dev;
struct em28xx_dmaqueue *vbiq = &dev->vbiq;
buf->vb.state = VIDEOBUF_QUEUED;
list_add_tail(&buf->vb.queue, &vbiq->active);
}
static void vbi_release(struct videobuf_queue *q, struct videobuf_buffer *vb)
vbi_buffer_queue(struct vb2_buffer *vb)
{
struct em28xx *dev = vb2_get_drv_priv(vb->vb2_queue);
struct em28xx_buffer *buf = container_of(vb, struct em28xx_buffer, vb);
free_buffer(q, buf);
struct em28xx_dmaqueue *vbiq = &dev->vbiq;
unsigned long flags = 0;
buf->mem = vb2_plane_vaddr(vb, 0);
buf->length = vb2_plane_size(vb, 0);
spin_lock_irqsave(&dev->slock, flags);
list_add_tail(&buf->list, &vbiq->active);
spin_unlock_irqrestore(&dev->slock, flags);
}
struct videobuf_queue_ops em28xx_vbi_qops = {
.buf_setup = vbi_setup,
.buf_prepare = vbi_prepare,
.buf_queue = vbi_queue,
.buf_release = vbi_release,
struct vb2_ops em28xx_vbi_qops = {
.queue_setup = vbi_queue_setup,
.buf_prepare = vbi_buffer_prepare,
.buf_queue = vbi_buffer_queue,
.start_streaming = em28xx_start_analog_streaming,
.stop_streaming = em28xx_stop_vbi_streaming,
.wait_prepare = vb2_ops_wait_prepare,
.wait_finish = vb2_ops_wait_finish,
};
This diff is collapsed.
......@@ -31,15 +31,12 @@
#include <linux/mutex.h>
#include <linux/videodev2.h>
#include <media/videobuf-vmalloc.h>
#include <media/videobuf2-vmalloc.h>
#include <media/v4l2-device.h>
#include <media/v4l2-ctrls.h>
#include <media/v4l2-fh.h>
#include <media/ir-kbd-i2c.h>
#include <media/rc-core.h>
#if defined(CONFIG_VIDEO_EM28XX_DVB) || defined(CONFIG_VIDEO_EM28XX_DVB_MODULE)
#include <media/videobuf-dvb.h>
#endif
#include "tuner-xc2028.h"
#include "xc5000.h"
#include "em28xx-reg.h"
......@@ -252,8 +249,11 @@ struct em28xx_fmt {
/* buffer for one video frame */
struct em28xx_buffer {
/* common v4l buffer stuff -- must be first */
struct videobuf_buffer vb;
struct vb2_buffer vb;
struct list_head list;
void *mem;
unsigned int length;
int top_field;
/* counter to control buffer fill */
......@@ -480,11 +480,6 @@ struct em28xx;
struct em28xx_fh {
struct v4l2_fh fh;
struct em28xx *dev;
int radio;
unsigned int resources;
struct videobuf_queue vb_vidq;
struct videobuf_queue vb_vbiq;
enum v4l2_buf_type type;
};
......@@ -545,6 +540,7 @@ struct em28xx {
struct i2c_client i2c_client;
/* video for linux */
int users; /* user count for exclusive use */
int streaming_users; /* Number of actively streaming users */
struct video_device *vdev; /* video for linux device struct */
v4l2_std_id norm; /* selected tv norm */
int ctl_freq; /* selected frequency */
......@@ -587,6 +583,12 @@ struct em28xx {
struct video_device *vbi_dev;
struct video_device *radio_dev;
/* Videobuf2 */
struct vb2_queue vb_vidq;
struct vb2_queue vb_vbiq;
struct mutex vb_queue_lock;
struct mutex vb_vbi_queue_lock;
/* resources in use */
unsigned int resources;
......@@ -598,6 +600,9 @@ struct em28xx {
struct em28xx_usb_ctl usb_ctl;
spinlock_t slock;
unsigned int field_count;
unsigned int vbi_field_count;
/* usb transfer */
struct usb_device *udev; /* the usb device */
u8 analog_ep_isoc; /* address of isoc endpoint for analog */
......@@ -709,9 +714,12 @@ void em28xx_init_extension(struct em28xx *dev);
void em28xx_close_extension(struct em28xx *dev);
/* Provided by em28xx-video.c */
int em28xx_vb2_setup(struct em28xx *dev);
int em28xx_register_analog_devices(struct em28xx *dev);
void em28xx_release_analog_resources(struct em28xx *dev);
void em28xx_ctrl_notify(struct v4l2_ctrl *ctrl, void *priv);
int em28xx_start_analog_streaming(struct vb2_queue *vq, unsigned int count);
int em28xx_stop_vbi_streaming(struct vb2_queue *vq);
extern const struct v4l2_ctrl_ops em28xx_ctrl_ops;
/* Provided by em28xx-cards.c */
......@@ -723,7 +731,7 @@ int em28xx_tuner_callback(void *ptr, int component, int command, int arg);
void em28xx_release_resources(struct em28xx *dev);
/* Provided by em28xx-vbi.c */
extern struct videobuf_queue_ops em28xx_vbi_qops;
extern struct vb2_ops em28xx_vbi_qops;
/* printk macros */
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment