Commit d4305c68 authored by Igor M. Liplianin's avatar Igor M. Liplianin Committed by Mauro Carvalho Chehab

V4L/DVB (9296): Patch to remove warning message during cx88-dvb compilation

Remove warning message during cx88-dvb compilation.
Also fixes double underline in function and struct names.
Signed-off-by: default avatarIgor M. Liplianin <liplianin@me.by>
Signed-off-by: default avatarMauro Carvalho Chehab <mchehab@redhat.com>
parent eb229b22
......@@ -595,6 +595,18 @@ static void dm1105dvb_hw_exit(struct dm1105dvb *dm1105dvb)
dm1105dvb_dma_unmap(dm1105dvb);
}
static struct stv0299_config sharp_z0194a_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a_inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = sharp_z0194a_set_symbol_rate,
};
static struct stv0288_config earda_config = {
.demod_address = 0x68,
.min_delay_ms = 100,
......
......@@ -422,6 +422,18 @@ static int dw210x_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage)
return 0;
}
static struct stv0299_config sharp_z0194a_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a_inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = sharp_z0194a_set_symbol_rate,
};
static struct cx24116_config dw2104_config = {
.demod_address = 0x55,
.mpg_clk_pos_pol = 0x01,
......
......@@ -12,7 +12,7 @@
#ifndef Z0194A
#define Z0194A
static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
static int sharp_z0194a_set_symbol_rate(struct dvb_frontend *fe,
u32 srate, u32 ratio)
{
u8 aclk = 0;
......@@ -40,7 +40,7 @@ static int sharp_z0194a__set_symbol_rate(struct dvb_frontend *fe,
return 0;
}
static u8 sharp_z0194a__inittab[] = {
static u8 sharp_z0194a_inittab[] = {
0x01, 0x15,
0x02, 0x00,
0x03, 0x00,
......@@ -82,16 +82,4 @@ static u8 sharp_z0194a__inittab[] = {
0xff, 0xff
};
static struct stv0299_config sharp_z0194a_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a__inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = STV0299_LOCKOUTPUT_1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = sharp_z0194a__set_symbol_rate,
};
#endif
......@@ -575,14 +575,14 @@ static struct cx24116_config tevii_s460_config = {
static struct stv0299_config tevii_tuner_sharp_config = {
.demod_address = 0x68,
.inittab = sharp_z0194a__inittab,
.inittab = sharp_z0194a_inittab,
.mclk = 88000000UL,
.invert = 1,
.skip_reinit = 0,
.lock_output = 1,
.volt13_op0_op1 = STV0299_VOLT13_OP1,
.min_delay_ms = 100,
.set_symbol_rate = sharp_z0194a__set_symbol_rate,
.set_symbol_rate = sharp_z0194a_set_symbol_rate,
.set_ts_params = cx24116_set_ts_param,
};
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment