Merge branch 'features/ahci' into for-arnd-features

arch/arm/mach-mx5/board-mx53_ard.c

@@ -234,6 +234,7 @@ static void __init mx53_ard_board_init(void)
 	imx53_add_imx_i2c(1, &mx53_ard_i2c2_data);
 	imx53_add_imx_i2c(2, &mx53_ard_i2c3_data);
 	imx_add_gpio_keys(&ard_button_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_ard_timer_init(void)

arch/arm/mach-mx5/board-mx53_loco.c

@@ -273,6 +273,7 @@ static void __init mx53_loco_board_init(void)
 	imx53_add_sdhci_esdhc_imx(2, &mx53_loco_sd3_data);
 	imx_add_gpio_keys(&loco_button_data);
 	gpio_led_register_device(-1, &mx53loco_leds_data);
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_loco_timer_init(void)

arch/arm/mach-mx5/board-mx53_smd.c

@@ -35,6 +35,7 @@
 #include "devices-imx53.h"
 
 #define SMD_FEC_PHY_RST		IMX_GPIO_NR(7, 6)
+#define MX53_SMD_SATA_PWR_EN    IMX_GPIO_NR(3, 3)
 
 static iomux_v3_cfg_t mx53_smd_pads[] = {
 	MX53_PAD_CSI0_DAT10__UART1_TXD_MUX,
@@ -111,6 +112,19 @@ static const struct imxi2c_platform_data mx53_smd_i2c_data __initconst = {
 	.bitrate = 100000,
 };
 
+static inline void mx53_smd_ahci_pwr_on(void)
+{
+	int ret;
+
+	/* Enable SATA PWR */
+	ret = gpio_request_one(MX53_SMD_SATA_PWR_EN,
+			GPIOF_DIR_OUT | GPIOF_INIT_HIGH, "ahci-sata-pwr");
+	if (ret) {
+		pr_err("failed to enable SATA_PWR_EN: %d\n", ret);
+		return;
+	}
+}
+
 static void __init mx53_smd_board_init(void)
 {
 	imx53_soc_init();
@@ -125,6 +139,8 @@ static void __init mx53_smd_board_init(void)
 	imx53_add_sdhci_esdhc_imx(0, NULL);
 	imx53_add_sdhci_esdhc_imx(1, NULL);
 	imx53_add_sdhci_esdhc_imx(2, NULL);
+	mx53_smd_ahci_pwr_on();
+	imx53_add_ahci_imx();
 }
 
 static void __init mx53_smd_timer_init(void)

arch/arm/mach-mx5/clock-mx51-mx53.c

@@ -1401,6 +1401,22 @@ static struct clk esdhc4_mx53_clk = {
 	.secondary = &esdhc4_ipg_clk,
 };
 
+static struct clk sata_clk = {
+	.parent = &ipg_clk,
+	.enable = _clk_max_enable,
+	.enable_reg = MXC_CCM_CCGR4,
+	.enable_shift = MXC_CCM_CCGRx_CG1_OFFSET,
+	.disable = _clk_max_disable,
+};
+
+static struct clk ahci_phy_clk = {
+	.parent = &usb_phy1_clk,
+};
+
+static struct clk ahci_dma_clk = {
+	.parent = &ahb_clk,
+};
+
 DEFINE_CLOCK(mipi_esc_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG5_OFFSET, NULL, NULL, NULL, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc2_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG4_OFFSET, NULL, NULL, &mipi_esc_clk, &pll2_sw_clk);
 DEFINE_CLOCK(mipi_hsc1_clk, 0, MXC_CCM_CCGR4, MXC_CCM_CCGRx_CG3_OFFSET, NULL, NULL, &mipi_hsc2_clk, &pll2_sw_clk);
@@ -1507,6 +1523,9 @@ static struct clk_lookup mx53_lookups[] = {
 	_REGISTER_CLOCK("imx-ssi.1", NULL, ssi2_clk)
 	_REGISTER_CLOCK("imx-ssi.2", NULL, ssi3_clk)
 	_REGISTER_CLOCK("imx-keypad", NULL, dummy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci", sata_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_phy", ahci_phy_clk)
+	_REGISTER_CLOCK("imx53-ahci.0", "ahci_dma", ahci_dma_clk)
 };
 
 static void clk_tree_init(void)

arch/arm/mach-mx5/devices-imx53.h

@@ -40,3 +40,5 @@ extern const struct imx_imx_ssi_data imx53_imx_ssi_data[];
 extern const struct imx_imx_keypad_data imx53_imx_keypad_data;
 #define imx53_add_imx_keypad(pdata)	\
 	imx_add_imx_keypad(&imx53_imx_keypad_data, pdata)
+
+extern struct platform_device *__init imx53_add_ahci_imx(void);

arch/arm/plat-mxc/devices/Kconfig

@@ -76,3 +76,7 @@ config IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX
 
 config IMX_HAVE_PLATFORM_SPI_IMX
 	bool
+
+config IMX_HAVE_PLATFORM_AHCI
+	bool
+	default y if ARCH_MX53

arch/arm/plat-mxc/devices/Makefile

@@ -25,3 +25,4 @@ obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_RTC) += platform-mxc_rtc.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_MXC_W1) += platform-mxc_w1.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SDHCI_ESDHC_IMX) += platform-sdhci-esdhc-imx.o
 obj-$(CONFIG_IMX_HAVE_PLATFORM_SPI_IMX) +=  platform-spi_imx.o
+obj-$(CONFIG_IMX_HAVE_PLATFORM_AHCI) +=  platform-ahci-imx.o

arch/arm/plat-mxc/devices/platform-ahci-imx.c

+/*
+ * Copyright (C) 2011 Freescale Semiconductor, Inc. All Rights Reserved.
+ */
+
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ */
+
+#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
+#include <linux/dma-mapping.h>
+#include <asm/sizes.h>
+#include <mach/hardware.h>
+#include <mach/devices-common.h>
+
+#define imx_ahci_imx_data_entry_single(soc, _devid)		\
+	{								\
+		.devid = _devid,					\
+		.iobase = soc ## _SATA_BASE_ADDR,			\
+		.irq = soc ## _INT_SATA,				\
+	}
+
+#ifdef CONFIG_SOC_IMX53
+const struct imx_ahci_imx_data imx53_ahci_imx_data __initconst =
+	imx_ahci_imx_data_entry_single(MX53, "imx53-ahci");
+#endif
+
+enum {
+	HOST_CAP = 0x00,
+	HOST_CAP_SSS = (1 << 27), /* Staggered Spin-up */
+	HOST_PORTS_IMPL	= 0x0c,
+	HOST_TIMER1MS = 0xe0, /* Timer 1-ms */
+};
+
+static struct clk *sata_clk, *sata_ref_clk;
+
+/* AHCI module Initialization, if return 0, initialization is successful. */
+static int imx_sata_init(struct device *dev, void __iomem *addr)
+{
+	u32 tmpdata;
+	int ret = 0;
+	struct clk *clk;
+
+	sata_clk = clk_get(dev, "ahci");
+	if (IS_ERR(sata_clk)) {
+		dev_err(dev, "no sata clock.\n");
+		return PTR_ERR(sata_clk);
+	}
+	ret = clk_enable(sata_clk);
+	if (ret) {
+		dev_err(dev, "can't enable sata clock.\n");
+		goto put_sata_clk;
+	}
+
+	/* Get the AHCI SATA PHY CLK */
+	sata_ref_clk = clk_get(dev, "ahci_phy");
+	if (IS_ERR(sata_ref_clk)) {
+		dev_err(dev, "no sata ref clock.\n");
+		ret = PTR_ERR(sata_ref_clk);
+		goto release_sata_clk;
+	}
+	ret = clk_enable(sata_ref_clk);
+	if (ret) {
+		dev_err(dev, "can't enable sata ref clock.\n");
+		goto put_sata_ref_clk;
+	}
+
+	/* Get the AHB clock rate, and configure the TIMER1MS reg later */
+	clk = clk_get(dev, "ahci_dma");
+	if (IS_ERR(clk)) {
+		dev_err(dev, "no dma clock.\n");
+		ret = PTR_ERR(clk);
+		goto release_sata_ref_clk;
+	}
+	tmpdata = clk_get_rate(clk) / 1000;
+	clk_put(clk);
+
+	writel(tmpdata, addr + HOST_TIMER1MS);
+
+	tmpdata = readl(addr + HOST_CAP);
+	if (!(tmpdata & HOST_CAP_SSS)) {
+		tmpdata |= HOST_CAP_SSS;
+		writel(tmpdata, addr + HOST_CAP);
+	}
+
+	if (!(readl(addr + HOST_PORTS_IMPL) & 0x1))
+		writel((readl(addr + HOST_PORTS_IMPL) | 0x1),
+			addr + HOST_PORTS_IMPL);
+
+	return 0;
+
+release_sata_ref_clk:
+	clk_disable(sata_ref_clk);
+put_sata_ref_clk:
+	clk_put(sata_ref_clk);
+release_sata_clk:
+	clk_disable(sata_clk);
+put_sata_clk:
+	clk_put(sata_clk);
+
+	return ret;
+}
+
+static void imx_sata_exit(struct device *dev)
+{
+	clk_disable(sata_ref_clk);
+	clk_put(sata_ref_clk);
+
+	clk_disable(sata_clk);
+	clk_put(sata_clk);
+
+}
+struct platform_device *__init imx_add_ahci_imx(
+		const struct imx_ahci_imx_data *data,
+		const struct ahci_platform_data *pdata)
+{
+	struct resource res[] = {
+		{
+			.start = data->iobase,
+			.end = data->iobase + SZ_4K - 1,
+			.flags = IORESOURCE_MEM,
+		}, {
+			.start = data->irq,
+			.end = data->irq,
+			.flags = IORESOURCE_IRQ,
+		},
+	};
+
+	return imx_add_platform_device_dmamask(data->devid, 0,
+			res, ARRAY_SIZE(res),
+			pdata, sizeof(*pdata),  DMA_BIT_MASK(32));
+}
+
+struct platform_device *__init imx53_add_ahci_imx(void)
+{
+	struct ahci_platform_data pdata = {
+		.init = imx_sata_init,
+		.exit = imx_sata_exit,
+	};
+
+	return imx_add_ahci_imx(&imx53_ahci_imx_data, &pdata);
+}

arch/arm/plat-mxc/include/mach/devices-common.h

@@ -301,3 +301,13 @@ struct platform_device *__init imx_add_spi_imx(
 struct platform_device *imx_add_imx_dma(void);
 struct platform_device *imx_add_imx_sdma(char *name,
 	resource_size_t iobase, int irq, struct sdma_platform_data *pdata);
+
+#include <linux/ahci_platform.h>
+struct imx_ahci_imx_data {
+	const char *devid;
+	resource_size_t iobase;
+	resource_size_t irq;
+};
+struct platform_device *__init imx_add_ahci_imx(
+		const struct imx_ahci_imx_data *data,
+		const struct ahci_platform_data *pdata);