Merge tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux into next

Pull main fbdev changes from Tomi Valkeinen:
 "Mainly fixes and small improvements.  The biggest change seems to be
  backlight control support for mx3fb"

* tag 'fbdev-main-3.16' of git://git.kernel.org/pub/scm/linux/kernel/git/tomba/linux: (31 commits)
  drivers/video/fbdev/fb-puv3.c: Add header files for function unifb_mmap
  video: fbdev: s3fb.c: Fix for possible null pointer dereference
  video: fbdev: grvga.c: Fix for possible null pointer dereference
  matroxfb: perform a dummy read of M_STATUS
  video: of: display_timing: fix default native-mode setting
  video: delete unneeded call to platform_get_drvdata
  video: mx3fb: Add backlight control support
  video: omap: delete support for early fbmem allocation
  video: of: display_timing: remove two unsafe error messages
  fbdev: fbmem: remove positive test on unsigned values
  fbcon: Fix memory leak in con2fb_release_oldinfo()
  video: Kconfig: Add a dependency to the Goldfish framebuffer driver
  video: exynos: Add a dependency to the menu
  video: mx3fb: Use devm_kzalloc
  video/nuc900: allow modular build
  video: atmel needs FB_BACKLIGHT
  video: export fb_prepare_logo
  video/mbx: fix building debugfs support
  video/omap: fix modular build
  video: clarify I2C dependencies
  ...

drivers/video/console/fbcon.c

@@ -748,6 +748,7 @@ static int con2fb_release_oldinfo(struct vc_data *vc, struct fb_info *oldinfo,
 		fbcon_del_cursor_timer(oldinfo);
 		kfree(ops->cursor_state.mask);
 		kfree(ops->cursor_data);
+		kfree(ops->cursor_src);
 		kfree(ops->fontbuffer);
 		kfree(oldinfo->fbcon_par);
 		oldinfo->fbcon_par = NULL;

drivers/video/fbdev/Kconfig

@@ -360,6 +360,7 @@ config FB_CYBER2000_DDC
 config FB_CYBER2000_I2C
 	bool "CyberPro 2000/2010/5000 I2C support"
 	depends on FB_CYBER2000 && I2C && ARCH_NETWINDER
+	depends on I2C=y || FB_CYBER2000=m
 	select I2C_ALGOBIT
 	help
 	  Enable support for the I2C video decoder interface on the
@@ -966,6 +967,7 @@ config FB_S1D13XXX
 config FB_ATMEL
 	tristate "AT91/AT32 LCD Controller support"
 	depends on FB && HAVE_FB_ATMEL
+	select FB_BACKLIGHT
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -1971,6 +1973,7 @@ config FB_W100
 config FB_SH_MOBILE_LCDC
 	tristate "SuperH Mobile LCDC framebuffer support"
 	depends on FB && (SUPERH || ARCH_SHMOBILE) && HAVE_CLK
+	depends on FB_SH_MOBILE_MERAM || !FB_SH_MOBILE_MERAM
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT
@@ -1993,7 +1996,7 @@ config FB_SH_MOBILE_HDMI
 
 config FB_TMIO
 	tristate "Toshiba Mobile IO FrameBuffer support"
-	depends on FB && MFD_CORE
+	depends on FB && (MFD_TMIO || COMPILE_TEST)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2062,7 +2065,7 @@ config FB_S3C2410_DEBUG
 	  through sysfs
 
 config FB_NUC900
-        bool "NUC900 LCD framebuffer support"
+        tristate "NUC900 LCD framebuffer support"
         depends on FB && ARCH_W90X900
         select FB_CFB_FILLRECT
         select FB_CFB_COPYAREA
@@ -2169,7 +2172,7 @@ config FB_XILINX
 
 config FB_GOLDFISH
 	tristate "Goldfish Framebuffer"
-	depends on FB && HAS_DMA
+	depends on FB && HAS_DMA && (GOLDFISH || COMPILE_TEST)
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
@@ -2295,6 +2298,7 @@ endchoice
 config FB_MB862XX_I2C
 	bool "Support I2C bus on MB862XX GDC"
 	depends on FB_MB862XX && I2C
+	depends on FB_MB862XX=m || I2C=y
 	default y
 	help
 	  Selecting this option adds Coral-P(A)/Lime GDC I2C bus adapter
@@ -2332,6 +2336,7 @@ config FB_MX3
 	select FB_CFB_FILLRECT
 	select FB_CFB_COPYAREA
 	select FB_CFB_IMAGEBLIT
+	select BACKLIGHT_CLASS_DEVICE
 	default y
 	help
 	  This is a framebuffer device for the i.MX31 LCD Controller. So

drivers/video/fbdev/bf54x-lq043fb.c

@@ -717,8 +717,6 @@ static int bfin_bf54x_remove(struct platform_device *pdev)
 #ifdef CONFIG_PM
 static int bfin_bf54x_suspend(struct platform_device *pdev, pm_message_t state)
 {
-	struct fb_info *fbinfo = platform_get_drvdata(pdev);
-
 	bfin_write_EPPI0_CONTROL(bfin_read_EPPI0_CONTROL() & ~EPPI_EN);
 	disable_dma(CH_EPPI0);
 	bfin_write_EPPI0_STATUS(0xFFFF);

drivers/video/fbdev/core/fbmem.c

@@ -433,7 +433,7 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
 			image->dx += image->width + 8;
 		}
 	} else if (rotate == FB_ROTATE_UD) {
-		for (x = 0; x < num && image->dx >= 0; x++) {
+		for (x = 0; x < num; x++) {
 			info->fbops->fb_imageblit(info, image);
 			image->dx -= image->width + 8;
 		}
@@ -445,7 +445,7 @@ static void fb_do_show_logo(struct fb_info *info, struct fb_image *image,
 			image->dy += image->height + 8;
 		}
 	} else if (rotate == FB_ROTATE_CCW) {
-		for (x = 0; x < num && image->dy >= 0; x++) {
+		for (x = 0; x < num; x++) {
 			info->fbops->fb_imageblit(info, image);
 			image->dy -= image->height + 8;
 		}
@@ -674,6 +674,7 @@ int fb_show_logo(struct fb_info *info, int rotate)
 int fb_prepare_logo(struct fb_info *info, int rotate) { return 0; }
 int fb_show_logo(struct fb_info *info, int rotate) { return 0; }
 #endif /* CONFIG_LOGO */
+EXPORT_SYMBOL(fb_prepare_logo);
 EXPORT_SYMBOL(fb_show_logo);
 
 static void *fb_seq_start(struct seq_file *m, loff_t *pos)
@@ -1179,7 +1180,7 @@ static long do_fb_ioctl(struct fb_info *info, unsigned int cmd,
 			return -EFAULT;
 		if (con2fb.console < 1 || con2fb.console > MAX_NR_CONSOLES)
 			return -EINVAL;
-		if (con2fb.framebuffer < 0 || con2fb.framebuffer >= FB_MAX)
+		if (con2fb.framebuffer >= FB_MAX)
 			return -EINVAL;
 		if (!registered_fb[con2fb.framebuffer])
 			request_module("fb%d", con2fb.framebuffer);

drivers/video/fbdev/core/fbmon.c

@@ -1012,13 +1012,20 @@ void fb_edid_add_monspecs(unsigned char *edid, struct fb_monspecs *specs)
 	while (pos < edid[2]) {
 		u8 len = edid[pos] & 0x1f, type = (edid[pos] >> 5) & 7;
 		pr_debug("Data block %u of %u bytes\n", type, len);
-		if (type == 2)
+		if (type == 2) {
 			for (i = pos; i < pos + len; i++) {
 				u8 idx = edid[pos + i] & 0x7f;
 				svd[svd_n++] = idx;
 				pr_debug("N%sative mode #%d\n",
 					 edid[pos + i] & 0x80 ? "" : "on-n", idx);
 			}
+		} else if (type == 3 && len >= 3) {
+			/* Check Vendor Specific Data Block.  For HDMI,
+			   it is always 00-0C-03 for HDMI Licensing, LLC. */
+			if (edid[pos + 1] == 3 && edid[pos + 2] == 0xc &&
+			    edid[pos + 3] == 0)
+				specs->misc |= FB_MISC_HDMI;
+		}
 		pos += len + 1;
 	}
 

drivers/video/fbdev/da8xx-fb.c

@@ -242,6 +242,20 @@ static struct fb_videomode known_lcd_panels[] = {
 		.sync           = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT,
 		.flag           = 0,
 	},
+	[3] = {
+		/* Densitron 84-0023-001T */
+		.name           = "Densitron_84-0023-001T",
+		.xres           = 320,
+		.yres           = 240,
+		.pixclock       = KHZ2PICOS(6400),
+		.left_margin    = 0,
+		.right_margin   = 0,
+		.upper_margin   = 0,
+		.lower_margin   = 0,
+		.hsync_len      = 30,
+		.vsync_len      = 3,
+		.sync           = 0,
+	},
 };
 
 static bool da8xx_fb_is_raster_enabled(void)

drivers/video/fbdev/exynos/Kconfig

@@ -4,6 +4,7 @@
 
 menuconfig EXYNOS_VIDEO
 	bool "Exynos Video driver support"
+	depends on ARCH_S5PV210 || ARCH_EXYNOS
 	help
 	  This enables support for EXYNOS Video device.
 
@@ -15,7 +16,6 @@ if EXYNOS_VIDEO
 
 config EXYNOS_MIPI_DSI
 	bool "EXYNOS MIPI DSI driver support."
-	depends on ARCH_S5PV210 || ARCH_EXYNOS
 	select GENERIC_PHY
 	help
 	  This enables support for MIPI-DSI device.

drivers/video/fbdev/fb-puv3.c

@@ -18,8 +18,10 @@
 #include <linux/fb.h>
 #include <linux/init.h>
 #include <linux/console.h>
+#include <linux/mm.h>
 
 #include <asm/sizes.h>
+#include <asm/pgtable.h>
 #include <mach/hardware.h>
 
 /* Platform_data reserved for unifb registers. */

drivers/video/fbdev/gbefb.c

@@ -1068,7 +1068,7 @@ static struct fb_ops gbefb_ops = {
 
 static ssize_t gbefb_show_memsize(struct device *dev, struct device_attribute *attr, char *buf)
 {
-	return snprintf(buf, PAGE_SIZE, "%d\n", gbe_mem_size);
+	return snprintf(buf, PAGE_SIZE, "%u\n", gbe_mem_size);
 }
 
 static DEVICE_ATTR(size, S_IRUGO, gbefb_show_memsize, NULL);

drivers/video/fbdev/grvga.c

@@ -514,9 +514,10 @@ static int grvga_probe(struct platform_device *dev)
 static int grvga_remove(struct platform_device *device)
 {
 	struct fb_info *info = dev_get_drvdata(&device->dev);
-	struct grvga_par *par = info->par;
+	struct grvga_par *par;
 
 	if (info) {
+		par = info->par;
 		unregister_framebuffer(info);
 		fb_dealloc_cmap(&info->cmap);
 

drivers/video/fbdev/matrox/matroxfb_base.h

@@ -698,7 +698,7 @@ void matroxfb_unregister_driver(struct matroxfb_driver* drv);
 
 #define mga_fifo(n)	do {} while ((mga_inl(M_FIFOSTATUS) & 0xFF) < (n))
 
-#define WaitTillIdle()	do {} while (mga_inl(M_STATUS) & 0x10000)
+#define WaitTillIdle()	do { mga_inl(M_STATUS); do {} while (mga_inl(M_STATUS) & 0x10000); } while (0)
 
 /* code speedup */
 #ifdef CONFIG_FB_MATROX_MILLENIUM

drivers/video/fbdev/mbx/Makefile

 # Makefile for the 2700G controller driver.
 
-obj-$(CONFIG_FB_MBX)	   += mbxfb.o
-obj-$(CONFIG_FB_MBX_DEBUG) += mbxfbdebugfs.o
+obj-y 			+= mbxfb.o

drivers/video/fbdev/mbx/mbxdebugfs.c

@@ -17,7 +17,7 @@ struct mbxfb_debugfs_data {
 
 static int open_file_generic(struct inode *inode, struct file *file)
 {
-	file->private_data = inode->u.generic_ip;
+	file->private_data = inode->i_private;
 	return 0;
 }
 

drivers/video/fbdev/mbx/mbxfb.c

@@ -877,6 +877,8 @@ static int mbxfb_resume(struct platform_device *dev)
 #ifndef CONFIG_FB_MBX_DEBUG
 #define mbxfb_debugfs_init(x)	do {} while(0)
 #define mbxfb_debugfs_remove(x)	do {} while(0)
+#else
+#include "mbxdebugfs.c"
 #endif
 
 #define res_size(_r) (((_r)->end - (_r)->start) + 1)

drivers/video/fbdev/mmp/Kconfig

 menuconfig MMP_DISP
         tristate "Marvell MMP Display Subsystem support"
-        depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
+        depends on CPU_PXA910 || CPU_MMP2
         help
 	  Marvell Display Subsystem support.
 

drivers/video/fbdev/mmp/fb/mmpfb.c

@@ -554,8 +554,8 @@ static void fb_info_clear(struct fb_info *info)
 static int mmpfb_probe(struct platform_device *pdev)
 {
 	struct mmp_buffer_driver_mach_info *mi;
-	struct fb_info *info = 0;
-	struct mmpfb_info *fbi = 0;
+	struct fb_info *info;
+	struct mmpfb_info *fbi;
 	int ret, modes_num;
 
 	mi = pdev->dev.platform_data;
@@ -569,10 +569,6 @@ static int mmpfb_probe(struct platform_device *pdev)
 	if (info == NULL)
 		return -ENOMEM;
 	fbi = info->par;
-	if (!fbi) {
-		ret = -EINVAL;
-		goto failed;
-	}
 
 	/* init fb */
 	fbi->fb_info = info;
@@ -667,7 +663,6 @@ static int mmpfb_probe(struct platform_device *pdev)
 		fbi->fb_start_dma);
 failed_destroy_mutex:
 	mutex_destroy(&fbi->access_ok);
-failed:
 	dev_err(fbi->dev, "mmp-fb: frame buffer device init failed\n");
 
 	framebuffer_release(info);

drivers/video/fbdev/mmp/hw/Kconfig

@@ -2,12 +2,12 @@ if MMP_DISP
 
 config MMP_DISP_CONTROLLER
 	bool "mmp display controller hw support"
-	depends on CPU_PXA910 || CPU_MMP2 || CPU_MMP3 || CPU_PXA988
+	depends on CPU_PXA910 || CPU_MMP2
 	default n
 	help
 		Marvell MMP display hw controller support
-		this controller is used on Marvell PXA910,
-		MMP2, MMP3, PXA988 chips
+		this controller is used on Marvell PXA910 and
+		MMP2 chips
 
 config MMP_DISP_SPI
 	bool "mmp display controller spi port"

drivers/video/fbdev/mmp/hw/mmp_ctrl.h

@@ -167,11 +167,7 @@ struct lcd_regs {
 				PN2_IOPAD_CONTROL) : LCD_TOP_CTRL)
 
 /* dither configure */
-#ifdef CONFIG_CPU_PXA988
-#define LCD_DITHER_CTRL				(0x01EC)
-#else
 #define LCD_DITHER_CTRL				(0x00A0)
-#endif
 
 #define DITHER_TBL_INDEX_SEL(s)		((s) << 16)
 #define DITHER_MODE2(m)				((m) << 12)
@@ -186,15 +182,6 @@ struct lcd_regs {
 #define DITHER_EN1					(1)
 
 /* dither table data was fixed by video bpp of input and output*/
-#ifdef CONFIG_CPU_PXA988
-#define DITHER_TB_4X4_INDEX0		(0x6e4ca280)
-#define DITHER_TB_4X4_INDEX1		(0x5d7f91b3)
-#define DITHER_TB_4X8_INDEX0		(0xb391a280)
-#define DITHER_TB_4X8_INDEX1		(0x7f5d6e4c)
-#define DITHER_TB_4X8_INDEX2		(0x80a291b3)
-#define DITHER_TB_4X8_INDEX3		(0x4c6e5d7f)
-#define LCD_DITHER_TBL_DATA		(0x01F0)
-#else
 #define DITHER_TB_4X4_INDEX0		(0x3b19f7d5)
 #define DITHER_TB_4X4_INDEX1		(0x082ac4e6)
 #define DITHER_TB_4X8_INDEX0		(0xf7d508e6)
@@ -202,7 +189,6 @@ struct lcd_regs {
 #define DITHER_TB_4X8_INDEX2		(0xc4e6d5f7)
 #define DITHER_TB_4X8_INDEX3		(0x082a193b)
 #define LCD_DITHER_TBL_DATA		(0x00A4)
-#endif
 
 /* Video Frame 0&1 start address registers */
 #define	LCD_SPU_DMA_START_ADDR_Y0	0x00C0
@@ -933,16 +919,9 @@ struct lcd_regs {
 #define LCD_PN2_SQULN2_CTRL			(0x02F0)
 #define ALL_LAYER_ALPHA_SEL			(0x02F4)
 
-/* pxa988 has different MASTER_CTRL from MMP3/MMP2 */
-#ifdef CONFIG_CPU_PXA988
-#define TIMING_MASTER_CONTROL			(0x01F4)
-#define MASTER_ENH(id)				(1 << ((id) + 5))
-#define MASTER_ENV(id)				(1 << ((id) + 6))
-#else
 #define TIMING_MASTER_CONTROL			(0x02F8)
 #define MASTER_ENH(id)				(1 << (id))
 #define MASTER_ENV(id)				(1 << ((id) + 4))
-#endif
 
 #define DSI_START_SEL_SHIFT(id)		(((id) << 1) + 8)
 #define timing_master_config(path, dsi_id, lcd_id) \
@@ -1312,19 +1291,8 @@ struct dsi_regs {
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_MASK		(0xff)
 #define	DSI_PHY_TIME_3_CFG_CSR_TIME_REQRDY_SHIFT	0
 
-/*
- * DSI timings
- * PXA988 has diffrent ESC CLK with MMP2/MMP3
- * it will be used in dsi_set_dphy() in pxa688_phy.c
- * as low power mode clock.
- */
-#ifdef CONFIG_CPU_PXA988
-#define DSI_ESC_CLK				52  /* Unit: Mhz */
-#define DSI_ESC_CLK_T				19  /* Unit: ns */
-#else
 #define DSI_ESC_CLK				66  /* Unit: Mhz */
 #define DSI_ESC_CLK_T				15  /* Unit: ns */
-#endif
 
 /* LVDS */
 /* LVDS_PHY_CTRL */

drivers/video/fbdev/mx3fb.c

@@ -27,6 +27,7 @@
 #include <linux/clk.h>
 #include <linux/mutex.h>
 #include <linux/dma/ipu-dma.h>
+#include <linux/backlight.h>
 
 #include <linux/platform_data/dma-imx.h>
 #include <linux/platform_data/video-mx3fb.h>
@@ -241,6 +242,7 @@ struct mx3fb_data {
 	void __iomem		*reg_base;
 	spinlock_t		lock;
 	struct device		*dev;
+	struct backlight_device	*bl;
 
 	uint32_t		h_start_width;
 	uint32_t		v_start_width;
@@ -271,6 +273,71 @@ struct mx3fb_info {
 	struct fb_var_screeninfo	cur_var; /* current var info */
 };
 
+static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value);
+static u32 sdc_get_brightness(struct mx3fb_data *mx3fb);
+
+static int mx3fb_bl_get_brightness(struct backlight_device *bl)
+{
+	struct mx3fb_data *fbd = bl_get_data(bl);
+
+	return sdc_get_brightness(fbd);
+}
+
+static int mx3fb_bl_update_status(struct backlight_device *bl)
+{
+	struct mx3fb_data *fbd = bl_get_data(bl);
+	int brightness = bl->props.brightness;
+
+	if (bl->props.power != FB_BLANK_UNBLANK)
+		brightness = 0;
+	if (bl->props.fb_blank != FB_BLANK_UNBLANK)
+		brightness = 0;
+
+	fbd->backlight_level = (fbd->backlight_level & ~0xFF) | brightness;
+
+	sdc_set_brightness(fbd, fbd->backlight_level);
+
+	return 0;
+}
+
+static const struct backlight_ops mx3fb_lcdc_bl_ops = {
+	.update_status = mx3fb_bl_update_status,
+	.get_brightness = mx3fb_bl_get_brightness,
+};
+
+static void mx3fb_init_backlight(struct mx3fb_data *fbd)
+{
+	struct backlight_properties props;
+	struct backlight_device	*bl;
+
+	if (fbd->bl)
+		return;
+
+	memset(&props, 0, sizeof(struct backlight_properties));
+	props.max_brightness = 0xff;
+	props.type = BACKLIGHT_RAW;
+	sdc_set_brightness(fbd, fbd->backlight_level);
+
+	bl = backlight_device_register("mx3fb-bl", fbd->dev, fbd,
+				       &mx3fb_lcdc_bl_ops, &props);
+	if (IS_ERR(bl)) {
+		dev_err(fbd->dev, "error %ld on backlight register\n",
+				PTR_ERR(bl));
+		return;
+	}
+
+	fbd->bl = bl;
+	bl->props.power = FB_BLANK_UNBLANK;
+	bl->props.fb_blank = FB_BLANK_UNBLANK;
+	bl->props.brightness = mx3fb_bl_get_brightness(bl);
+}
+
+static void mx3fb_exit_backlight(struct mx3fb_data *fbd)
+{
+	if (fbd->bl)
+		backlight_device_unregister(fbd->bl);
+}
+
 static void mx3fb_dma_done(void *);
 
 /* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */
@@ -628,6 +695,16 @@ static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t a
 	return 0;
 }
 
+static u32 sdc_get_brightness(struct mx3fb_data *mx3fb)
+{
+	u32 brightness;
+
+	brightness = mx3fb_read_reg(mx3fb, SDC_PWM_CTRL);
+	brightness = (brightness >> 16) & 0xFF;
+
+	return brightness;
+}
+
 static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value)
 {
 	dev_dbg(mx3fb->dev, "%s: value = %d\n", __func__, value);
@@ -1496,7 +1573,7 @@ static int mx3fb_probe(struct platform_device *pdev)
 	if (!sdc_reg)
 		return -EINVAL;
 
-	mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL);
+	mx3fb = devm_kzalloc(&pdev->dev, sizeof(*mx3fb), GFP_KERNEL);
 	if (!mx3fb)
 		return -ENOMEM;
 
@@ -1534,6 +1611,8 @@ static int mx3fb_probe(struct platform_device *pdev)
 	if (ret < 0)
 		goto eisdc0;
 
+	mx3fb_init_backlight(mx3fb);
+
 	return 0;
 
 eisdc0:
@@ -1542,7 +1621,6 @@ static int mx3fb_probe(struct platform_device *pdev)
 	dmaengine_put();
 	iounmap(mx3fb->reg_base);
 eremap:
-	kfree(mx3fb);
 	dev_err(dev, "mx3fb: failed to register fb\n");
 	return ret;
 }
@@ -1557,11 +1635,12 @@ static int mx3fb_remove(struct platform_device *dev)
 	chan = &mx3_fbi->idmac_channel->dma_chan;
 	release_fbi(fbi);
 
+	mx3fb_exit_backlight(mx3fb);
+
 	dma_release_channel(chan);
 	dmaengine_put();
 
 	iounmap(mx3fb->reg_base);
-	kfree(mx3fb);
 	return 0;
 }
 

drivers/video/fbdev/omap/Kconfig

@@ -39,6 +39,15 @@ config FB_OMAP_LCD_MIPID
 	  the Mobile Industry Processor Interface DBI-C/DCS
 	  specification. (Supported LCDs: Philips LPH8923, Sharp LS041Y3)
 
+config FB_OMAP_LCD_H3
+	bool "TPS65010 LCD controller on OMAP-H3"
+	depends on MACH_OMAP_H3
+	depends on TPS65010
+	default y
+	help
+	  Say Y here if you want to have support for the LCD on the
+	  H3 board.
+
 config FB_OMAP_DMA_TUNE
         bool "Set DMA SDRAM access priority high"
         depends on FB_OMAP

drivers/video/fbdev/omap/Makefile

@@ -10,17 +10,18 @@ objs-y$(CONFIG_FB_OMAP_LCDC_EXTERNAL) += sossi.o
 
 objs-y$(CONFIG_FB_OMAP_LCDC_HWA742) += hwa742.o
 
-objs-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
-objs-y$(CONFIG_MACH_OMAP_H3) += lcd_h3.o
-objs-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
-objs-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
-objs-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
-objs-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
-objs-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
-objs-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
-
-objs-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
-objs-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
+lcds-y$(CONFIG_MACH_AMS_DELTA) += lcd_ams_delta.o
+lcds-y$(CONFIG_FB_OMAP_LCD_H3) += lcd_h3.o
+lcds-y$(CONFIG_MACH_OMAP_PALMTE) += lcd_palmte.o
+lcds-y$(CONFIG_MACH_OMAP_PALMTT) += lcd_palmtt.o
+lcds-y$(CONFIG_MACH_OMAP_PALMZ71) += lcd_palmz71.o
+lcds-$(CONFIG_ARCH_OMAP16XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1610.o
+lcds-$(CONFIG_ARCH_OMAP15XX)$(CONFIG_MACH_OMAP_INNOVATOR) += lcd_inn1510.o
+lcds-y$(CONFIG_MACH_OMAP_OSK) += lcd_osk.o
+
+lcds-y$(CONFIG_FB_OMAP_LCD_MIPID) += lcd_mipid.o
+lcds-y$(CONFIG_MACH_HERALD) += lcd_htcherald.o
 
 omapfb-objs := $(objs-yy)
 
+obj-$(CONFIG_FB_OMAP) += $(lcds-yy)

drivers/video/fbdev/omap/lcdc.c

@@ -74,7 +74,6 @@ static struct omap_lcd_controller {
 	void			(*dma_callback)(void *data);
 	void			*dma_callback_data;
 
-	int			fbmem_allocated;
 	dma_addr_t		vram_phys;
 	void			*vram_virt;
 	unsigned long		vram_size;
@@ -611,42 +610,6 @@ static void lcdc_dma_handler(u16 status, void *data)
 		lcdc.dma_callback(lcdc.dma_callback_data);
 }
 
-static int mmap_kern(void)
-{
-	struct vm_struct	*kvma;
-	struct vm_area_struct	vma;
-	pgprot_t		pgprot;
-	unsigned long		vaddr;
-
-	kvma = get_vm_area(lcdc.vram_size, VM_IOREMAP);
-	if (kvma == NULL) {
-		dev_err(lcdc.fbdev->dev, "can't get kernel vm area\n");
-		return -ENOMEM;
-	}
-	vma.vm_mm = &init_mm;
-
-	vaddr = (unsigned long)kvma->addr;
-	vma.vm_start = vaddr;
-	vma.vm_end = vaddr + lcdc.vram_size;
-
-	pgprot = pgprot_writecombine(pgprot_kernel);
-	if (io_remap_pfn_range(&vma, vaddr,
-			   lcdc.vram_phys >> PAGE_SHIFT,
-			   lcdc.vram_size, pgprot) < 0) {
-		dev_err(lcdc.fbdev->dev, "kernel mmap for FB memory failed\n");
-		return -EAGAIN;
-	}
-
-	lcdc.vram_virt = (void *)vaddr;
-
-	return 0;
-}
-
-static void unmap_kern(void)
-{
-	vunmap(lcdc.vram_virt);
-}
-
 static int alloc_palette_ram(void)
 {
 	lcdc.palette_virt = dma_alloc_writecombine(lcdc.fbdev->dev,
@@ -703,8 +666,6 @@ static void free_fbmem(void)
 
 static int setup_fbmem(struct omapfb_mem_desc *req_md)
 {
-	int r;
-
 	if (!req_md->region_cnt) {
 		dev_err(lcdc.fbdev->dev, "no memory regions defined\n");
 		return -EINVAL;
@@ -715,31 +676,7 @@ static int setup_fbmem(struct omapfb_mem_desc *req_md)
 		req_md->region_cnt = 1;
 	}
 
-	if (req_md->region[0].paddr == 0) {
-		lcdc.fbmem_allocated = 1;
-		if ((r = alloc_fbmem(&req_md->region[0])) < 0)
-			return r;
-		return 0;
-	}
-
-	lcdc.vram_phys = req_md->region[0].paddr;
-	lcdc.vram_size = req_md->region[0].size;
-
-	if ((r = mmap_kern()) < 0)
-		return r;
-
-	dev_dbg(lcdc.fbdev->dev, "vram at %08x size %08lx mapped to 0x%p\n",
-		 lcdc.vram_phys, lcdc.vram_size, lcdc.vram_virt);
-
-	return 0;
-}
-
-static void cleanup_fbmem(void)
-{
-	if (lcdc.fbmem_allocated)
-		free_fbmem();
-	else
-		unmap_kern();
+	return alloc_fbmem(&req_md->region[0]);
 }
 
 static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode,
@@ -833,7 +770,7 @@ static void omap_lcdc_cleanup(void)
 {
 	if (!lcdc.ext_mode)
 		free_palette_ram();
-	cleanup_fbmem();
+	free_fbmem();
 	omap_free_lcd_dma();
 	free_irq(OMAP_LCDC_IRQ, lcdc.fbdev);
 	clk_disable(lcdc.lcd_ck);

drivers/video/fbdev/omap/omapfb_main.c

@@ -1823,6 +1823,7 @@ void omapfb_register_panel(struct lcd_panel *panel)
 	if (fbdev_pdev != NULL)
 		omapfb_do_probe(fbdev_pdev, fbdev_panel);
 }
+EXPORT_SYMBOL_GPL(omapfb_register_panel);
 
 /* Called when the device is being detached from the driver */
 static int omapfb_remove(struct platform_device *pdev)

drivers/video/fbdev/pxa3xx-gcu.c

@@ -612,11 +612,9 @@ static int pxa3xx_gcu_probe(struct platform_device *pdev)
 
 	/* handle IO resources */
 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	priv->mmio_base = devm_request_and_ioremap(dev, r);
-	if (IS_ERR(priv->mmio_base)) {
-		dev_err(dev, "failed to map I/O memory\n");
+	priv->mmio_base = devm_ioremap_resource(dev, r);
+	if (IS_ERR(priv->mmio_base))
 		return PTR_ERR(priv->mmio_base);
-	}
 
 	/* enable the clock */
 	priv->clk = devm_clk_get(dev, NULL);

drivers/video/fbdev/s3fb.c

@@ -1401,9 +1401,10 @@ static int s3_pci_probe(struct pci_dev *dev, const struct pci_device_id *id)
 static void s3_pci_remove(struct pci_dev *dev)
 {
 	struct fb_info *info = pci_get_drvdata(dev);
-	struct s3fb_info __maybe_unused *par = info->par;
+	struct s3fb_info __maybe_unused *par;
 
 	if (info) {
+		par = info->par;
 
 #ifdef CONFIG_MTRR
 		if (par->mtrr_reg >= 0) {

drivers/video/fbdev/wm8505fb.c

@@ -162,7 +162,7 @@ static ssize_t contrast_show(struct device *dev,
 	struct fb_info *info = dev_get_drvdata(dev);
 	struct wm8505fb_info *fbi = to_wm8505fb_info(info);
 
-	return sprintf(buf, "%d\n", fbi->contrast);
+	return sprintf(buf, "%u\n", fbi->contrast);
 }
 
 static ssize_t contrast_store(struct device *dev,

drivers/video/of_display_timing.c

@@ -115,10 +115,8 @@ int of_get_display_timing(struct device_node *np, const char *name,
 {
 	struct device_node *timing_np;
 
-	if (!np) {
-		pr_err("%s: no devicenode given\n", of_node_full_name(np));
+	if (!np)
 		return -EINVAL;
-	}
 
 	timing_np = of_get_child_by_name(np, name);
 	if (!timing_np) {
@@ -142,10 +140,8 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 	struct device_node *native_mode;
 	struct display_timings *disp;
 
-	if (!np) {
-		pr_err("%s: no device node given\n", of_node_full_name(np));
+	if (!np)
 		return NULL;
-	}
 
 	timings_np = of_get_child_by_name(np, "display-timings");
 	if (!timings_np) {
@@ -164,7 +160,7 @@ struct display_timings *of_get_display_timings(struct device_node *np)
 	entry = of_parse_phandle(timings_np, "native-mode", 0);
 	/* assume first child as native mode if none provided */
 	if (!entry)
-		entry = of_get_next_child(np, NULL);
+		entry = of_get_next_child(timings_np, NULL);
 	/* if there is no child, it is useless to go on */
 	if (!entry) {
 		pr_err("%s: no timing specifications given\n",

include/linux/fb.h

@@ -47,6 +47,7 @@ struct device_node;
 
 #define FB_MISC_PRIM_COLOR	1
 #define FB_MISC_1ST_DETAIL	2	/* First Detailed Timing is preferred */
+#define FB_MISC_HDMI		4
 struct fb_chroma {
 	__u32 redx;	/* in fraction of 1024 */
 	__u32 greenx;
@@ -641,7 +642,7 @@ static inline void unlock_fb_info(struct fb_info *info)
 static inline void __fb_pad_aligned_buffer(u8 *dst, u32 d_pitch,
 					   u8 *src, u32 s_pitch, u32 height)
 {
-	int i, j;
+	u32 i, j;
 
 	d_pitch -= s_pitch;
 

include/linux/omap-dma.h

@@ -393,7 +393,7 @@ extern int omap_modify_dma_chain_params(int chain_id,
 extern int omap_dma_chain_status(int chain_id);
 #endif
 
-#if defined(CONFIG_ARCH_OMAP1) && defined(CONFIG_FB_OMAP)
+#if defined(CONFIG_ARCH_OMAP1) && IS_ENABLED(CONFIG_FB_OMAP)
 #include <mach/lcd_dma.h>
 #else
 static inline int omap_lcd_dma_running(void)