Commit d58153d8 authored by Ben Dooks's avatar Ben Dooks Committed by Russell King

[ARM] 4509/1: S3C: Create initial arch/arm/plat-s3c

Create the initial arch/arm/plat-s3c directory and start
linking it into the arch/arm build heirarchy ready to
receive the generic parts of the S3C24XX support to be
used when adding S3C6400 devices.
Signed-off-by: default avatarBen Dooks <ben-linux@fluff.org>
Signed-off-by: default avatarRussell King <rmk+kernel@arm.linux.org.uk>
parent 531b617c
......@@ -432,6 +432,7 @@ source "arch/arm/mach-omap1/Kconfig"
source "arch/arm/mach-omap2/Kconfig"
source "arch/arm/plat-s3c24xx/Kconfig"
source "arch/arm/plat-s3c/Kconfig"
if ARCH_S3C2410
source "arch/arm/mach-s3c2400/Kconfig"
......
# arch/arm/plat-s3c/Kconfig
#
# Copyright 2007 Simtec Electronics
#
# Licensed under GPLv2
config PLAT_S3C
bool
depends on ARCH_S3C2410
default y if ARCH_S3C2410
select NO_IOPORT
help
Base platform code for any Samsung S3C device
comment "Boot options"
config S3C2410_BOOT_WATCHDOG
bool "S3C2410 Initialisation watchdog"
depends on PLAT_S3C && S3C2410_WATCHDOG
help
Say y to enable the watchdog during the kernel decompression
stage. If the kernel fails to uncompress, then the watchdog
will trigger a reset and the system should restart.
config S3C2410_BOOT_ERROR_RESET
bool "S3C2410 Reboot on decompression error"
depends on PLAT_S3C
help
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
comment "Power management"
config S3C2410_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on PLAT_S3C && PM
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on PLAT_S3C && PM && CRC32
help
Enable the PM code's memory area checksum over sleep. This option
will generate CRCs of all blocks of memory, and store them before
going to sleep. The blocks are then checked on resume for any
errors.
Note, this can take several seconds depending on memory size
and CPU speed.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config S3C2410_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
depends on PLAT_S3C && PM && S3C2410_PM_CHECK
default 64
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
the CRC data block will take more memory, but wil identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config S3C2410_LOWLEVEL_UART_PORT
int "S3C2410 UART to use for low-level messages"
depends on PLAT_S3C
default 0
help
Choice of which UART port to use for the low-level messages,
such as the `Uncompressing...` at start time. The value of
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
......@@ -10,7 +10,7 @@ config PLAT_S3C24XX
default y if ARCH_S3C2410
select NO_IOPORT
help
Base platform code for any Samsung S3C device
Base platform code for any Samsung S3C24XX device
if PLAT_S3C24XX
......@@ -26,64 +26,6 @@ config PM_SIMTEC
Common power management code for systems that are
compatible with the Simtec style of power management
config S3C2410_BOOT_WATCHDOG
bool "S3C2410 Initialisation watchdog"
depends on ARCH_S3C2410 && S3C2410_WATCHDOG
help
Say y to enable the watchdog during the kernel decompression
stage. If the kernel fails to uncompress, then the watchdog
will trigger a reset and the system should restart.
config S3C2410_BOOT_ERROR_RESET
bool "S3C2410 Reboot on decompression error"
depends on ARCH_S3C2410
help
Say y here to use the watchdog to reset the system if the
kernel decompressor detects an error during decompression.
config S3C2410_PM_DEBUG
bool "S3C2410 PM Suspend debug"
depends on ARCH_S3C2410 && PM
help
Say Y here if you want verbose debugging from the PM Suspend and
Resume code. See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
for more information.
config S3C2410_PM_CHECK
bool "S3C2410 PM Suspend Memory CRC"
depends on ARCH_S3C2410 && PM && CRC32
help
Enable the PM code's memory area checksum over sleep. This option
will generate CRCs of all blocks of memory, and store them before
going to sleep. The blocks are then checked on resume for any
errors.
Note, this can take several seconds depending on memory size
and CPU speed.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config S3C2410_PM_CHECK_CHUNKSIZE
int "S3C2410 PM Suspend CRC Chunksize (KiB)"
depends on ARCH_S3C2410 && PM && S3C2410_PM_CHECK
default 64
help
Set the chunksize in Kilobytes of the CRC for checking memory
corruption over suspend and resume. A smaller value will mean that
the CRC data block will take more memory, but wil identify any
faults with better precision.
See <file:Documentation/arm/Samsung-S3C24XX/Suspend.txt>
config S3C2410_LOWLEVEL_UART_PORT
int "S3C2410 UART to use for low-level messages"
default 0
help
Choice of which UART port to use for the low-level messages,
such as the `Uncompressing...` at start time. The value of
this configuration should be between zero and two. The port
must have been initialised by the boot-loader before use.
config S3C2410_DMA
bool "S3C2410 DMA support"
depends on ARCH_S3C2410
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment