MIPS: ath25: register AR5312 flash controller

AR5312 SoC flash controller maps the flash content to memory and
translates the memory access operations to the flash access operations.
Such controller is fully supported by the physmap-flash driver.

Signed-off-by: Sergey Ryazanov <ryazanov.s.a@gmail.com>R5312 SoC flash
Cc: Linux MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/8245/Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

arch/mips/ath25/ar5312.c

@@ -19,6 +19,8 @@
 #include <linux/bitops.h>
 #include <linux/irqdomain.h>
 #include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/physmap.h>
 #include <linux/reboot.h>
 #include <asm/bootinfo.h>
 #include <asm/reboot.h>
@@ -160,6 +162,24 @@ void __init ar5312_arch_init_irq(void)
 	ar5312_misc_irq_domain = domain;
 }
 
+static struct physmap_flash_data ar5312_flash_data = {
+	.width = 2,
+};
+
+static struct resource ar5312_flash_resource = {
+	.start = AR5312_FLASH_BASE,
+	.end = AR5312_FLASH_BASE + AR5312_FLASH_SIZE - 1,
+	.flags = IORESOURCE_MEM,
+};
+
+static struct platform_device ar5312_physmap_flash = {
+	.name = "physmap-flash",
+	.id = 0,
+	.dev.platform_data = &ar5312_flash_data,
+	.resource = &ar5312_flash_resource,
+	.num_resources = 1,
+};
+
 static void __init ar5312_flash_init(void)
 {
 	void __iomem *flashctl_base;
@@ -168,12 +188,24 @@ static void __init ar5312_flash_init(void)
 	flashctl_base = ioremap_nocache(AR5312_FLASHCTL_BASE,
 					AR5312_FLASHCTL_SIZE);
 
+	ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0);
+	ctl &= AR5312_FLASHCTL_MW;
+
+	/* fixup flash width */
+	switch (ctl) {
+	case AR5312_FLASHCTL_MW16:
+		ar5312_flash_data.width = 2;
+		break;
+	case AR5312_FLASHCTL_MW8:
+	default:
+		ar5312_flash_data.width = 1;
+		break;
+	}
+
 	/*
 	 * Configure flash bank 0.
 	 * Assume 8M window size. Flash will be aliased if it's smaller
 	 */
-	ctl = __raw_readl(flashctl_base + AR5312_FLASHCTL0);
-	ctl &= AR5312_FLASHCTL_MW;
 	ctl |= AR5312_FLASHCTL_E | AR5312_FLASHCTL_AC_8M | AR5312_FLASHCTL_RBLE;
 	ctl |= 0x01 << AR5312_FLASHCTL_IDCY_S;
 	ctl |= 0x07 << AR5312_FLASHCTL_WST1_S;
@@ -212,6 +244,8 @@ void __init ar5312_init_devices(void)
 	/* Everything else is probably AR5312 or compatible */
 	else
 		ath25_soc = ATH25_SOC_AR5312;
+
+	platform_device_register(&ar5312_physmap_flash);
 }
 
 static void ar5312_restart(char *command)