Commit d5bc1613 authored by Ivan Khoronzhuk's avatar Ivan Khoronzhuk Committed by David S. Miller

net: ethernet: ti: cpsw: use var instead of func for usage count

The usage count function is based on ndev_running flag that is
updated before calling ndo_open/close, but if ndo is called in
another place, as with suspend/resume, the counter is not changed,
that breaks sus/resume. For common resource no difference which
device is using it, does matter only device count. So, replace
usage count function on var and inc and dec it in ndo_open/close.
Signed-off-by: default avatarIvan Khoronzhuk <ivan.khoronzhuk@linaro.org>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 675d4d5c
......@@ -399,6 +399,7 @@ struct cpsw_common {
struct cpts *cpts;
int rx_ch_num, tx_ch_num;
int speed;
int usage_count;
};
struct cpsw_priv {
......@@ -671,18 +672,6 @@ static void cpsw_intr_disable(struct cpsw_common *cpsw)
return;
}
static int cpsw_get_usage_count(struct cpsw_common *cpsw)
{
u32 i;
u32 usage_count = 0;
for (i = 0; i < cpsw->data.slaves; i++)
if (cpsw->slaves[i].ndev && netif_running(cpsw->slaves[i].ndev))
usage_count++;
return usage_count;
}
static void cpsw_tx_handler(void *token, int len, int status)
{
struct netdev_queue *txq;
......@@ -716,8 +705,7 @@ static void cpsw_rx_handler(void *token, int len, int status)
if (unlikely(status < 0) || unlikely(!netif_running(ndev))) {
/* In dual emac mode check for all interfaces */
if (cpsw->data.dual_emac &&
cpsw_get_usage_count(cpsw) &&
if (cpsw->data.dual_emac && cpsw->usage_count &&
(status >= 0)) {
/* The packet received is for the interface which
* is already down and the other interface is up
......@@ -1492,11 +1480,8 @@ static int cpsw_ndo_open(struct net_device *ndev)
CPSW_MAJOR_VERSION(reg), CPSW_MINOR_VERSION(reg),
CPSW_RTL_VERSION(reg));
/* Initialize host and slave ports.
* Given ndev is marked as opened already, so init port only if 1 ndev
* is opened
*/
if (cpsw_get_usage_count(cpsw) < 2)
/* Initialize host and slave ports */
if (!cpsw->usage_count)
cpsw_init_host_port(priv);
for_each_slave(priv, cpsw_slave_open, priv);
......@@ -1507,10 +1492,8 @@ static int cpsw_ndo_open(struct net_device *ndev)
cpsw_ale_add_vlan(cpsw->ale, cpsw->data.default_vlan,
ALE_ALL_PORTS, ALE_ALL_PORTS, 0, 0);
/* Given ndev is marked as opened already, so if more ndev
* are opened - no need to init shared resources.
*/
if (cpsw_get_usage_count(cpsw) < 2) {
/* initialize shared resources for every ndev */
if (!cpsw->usage_count) {
/* disable priority elevation */
__raw_writel(0, &cpsw->regs->ptype);
......@@ -1552,6 +1535,7 @@ static int cpsw_ndo_open(struct net_device *ndev)
cpdma_ctlr_start(cpsw->dma);
cpsw_intr_enable(cpsw);
cpsw->usage_count++;
return 0;
......@@ -1572,10 +1556,7 @@ static int cpsw_ndo_stop(struct net_device *ndev)
netif_tx_stop_all_queues(priv->ndev);
netif_carrier_off(priv->ndev);
/* Given ndev is marked as close already,
* so disable shared resources if no open devices
*/
if (!cpsw_get_usage_count(cpsw)) {
if (cpsw->usage_count <= 1) {
napi_disable(&cpsw->napi_rx);
napi_disable(&cpsw->napi_tx);
cpts_unregister(cpsw->cpts);
......@@ -1588,6 +1569,7 @@ static int cpsw_ndo_stop(struct net_device *ndev)
if (cpsw_need_resplit(cpsw))
cpsw_split_res(ndev);
cpsw->usage_count--;
pm_runtime_put_sync(cpsw->dev);
return 0;
}
......@@ -2393,7 +2375,7 @@ static int cpsw_resume_data_pass(struct net_device *ndev)
netif_dormant_off(slave->ndev);
/* After this receive is started */
if (cpsw_get_usage_count(cpsw)) {
if (cpsw->usage_count) {
ret = cpsw_fill_rx_channels(priv);
if (ret)
return ret;
......@@ -2447,7 +2429,7 @@ static int cpsw_set_channels(struct net_device *ndev,
}
}
if (cpsw_get_usage_count(cpsw))
if (cpsw->usage_count)
cpsw_split_res(ndev);
ret = cpsw_resume_data_pass(ndev);
......@@ -2529,7 +2511,7 @@ static int cpsw_set_ringparam(struct net_device *ndev,
cpdma_set_num_rx_descs(cpsw->dma, ering->rx_pending);
if (cpsw_get_usage_count(cpsw))
if (cpsw->usage_count)
cpdma_chan_split_pool(cpsw->dma);
ret = cpsw_resume_data_pass(ndev);
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment