arm64: dts: marvell: cp110: add PPv2 port interrupts

Ports interrupts are used by the PPv2 driver when no PHY is connected to
a port. This patch adds a description of these interrupts.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Marcin Wojtas <mw@semihalf.com>
Signed-off-by: Gregory CLEMENT <gregory.clement@free-electrons.com>

arch/arm64/boot/dts/marvell/armada-cp110-master.dtsi

@@ -74,9 +74,10 @@ cpm_eth0: eth0 {
 						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared";
+							  "tx-cpu3", "rx-shared", "link";
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
@@ -87,9 +88,10 @@ cpm_eth1: eth1 {
 						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared";
+							  "tx-cpu3", "rx-shared", "link";
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
@@ -100,9 +102,10 @@ cpm_eth2: eth2 {
 						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared";
+							  "tx-cpu3", "rx-shared", "link";
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";

arch/arm64/boot/dts/marvell/armada-cp110-slave.dtsi

@@ -74,9 +74,10 @@ cps_eth0: eth0 {
 						     <ICU_GRP_NSR 43 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 47 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 51 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>;
+						     <ICU_GRP_NSR 55 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 129 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared";
+							  "tx-cpu3", "rx-shared", "link";
 					port-id = <0>;
 					gop-port-id = <0>;
 					status = "disabled";
@@ -87,9 +88,10 @@ cps_eth1: eth1 {
 						     <ICU_GRP_NSR 44 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 48 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 52 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>;
+						     <ICU_GRP_NSR 56 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 128 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared";
+							  "tx-cpu3", "rx-shared", "link";
 					port-id = <1>;
 					gop-port-id = <2>;
 					status = "disabled";
@@ -100,9 +102,10 @@ cps_eth2: eth2 {
 						     <ICU_GRP_NSR 45 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 49 IRQ_TYPE_LEVEL_HIGH>,
 						     <ICU_GRP_NSR 53 IRQ_TYPE_LEVEL_HIGH>,
-						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>;
+						     <ICU_GRP_NSR 57 IRQ_TYPE_LEVEL_HIGH>,
+						     <ICU_GRP_NSR 127 IRQ_TYPE_LEVEL_HIGH>;
 					interrupt-names = "tx-cpu0", "tx-cpu1", "tx-cpu2",
-							  "tx-cpu3", "rx-shared";
+							  "tx-cpu3", "rx-shared", "link";
 					port-id = <2>;
 					gop-port-id = <3>;
 					status = "disabled";