[POWERPC] spufs: rework class 0 and 1 interrupt handling

Based on original patches from
 Arnd Bergmann <arnd.bergman@de.ibm.com>; and
 Luke Browning <lukebr@linux.vnet.ibm.com>

Currently, spu contexts need to be loaded to the SPU in order to take
class 0 and class 1 exceptions.

This change makes the actual interrupt-handlers much simpler (ie,
set the exception information in the context save area), and defers the
handling code to the spufs_handle_class[01] functions, called from
spufs_run_spu.

This should improve the concurrency of the spu scheduling leading to
greater SPU utilization when SPUs are overcommited.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Paul Mackerras <paulus@samba.org>

arch/powerpc/platforms/cell/spu_base.c

@@ -132,27 +132,6 @@ int spu_64k_pages_available(void)
 }
 EXPORT_SYMBOL_GPL(spu_64k_pages_available);
 
-static int __spu_trap_invalid_dma(struct spu *spu)
-{
-	pr_debug("%s\n", __FUNCTION__);
-	spu->dma_callback(spu, SPE_EVENT_INVALID_DMA);
-	return 0;
-}
-
-static int __spu_trap_dma_align(struct spu *spu)
-{
-	pr_debug("%s\n", __FUNCTION__);
-	spu->dma_callback(spu, SPE_EVENT_DMA_ALIGNMENT);
-	return 0;
-}
-
-static int __spu_trap_error(struct spu *spu)
-{
-	pr_debug("%s\n", __FUNCTION__);
-	spu->dma_callback(spu, SPE_EVENT_SPE_ERROR);
-	return 0;
-}
-
 static void spu_restart_dma(struct spu *spu)
 {
 	struct spu_priv2 __iomem *priv2 = spu->priv2;
@@ -252,10 +231,12 @@ static int __spu_trap_data_map(struct spu *spu, unsigned long ea, u64 dsisr)
 		return 1;
 	}
 
+	spu->class_0_pending = 0;
 	spu->dar = ea;
 	spu->dsisr = dsisr;
-	mb();
+
 	spu->stop_callback(spu);
+
 	return 0;
 }
 
@@ -335,12 +316,13 @@ spu_irq_class_0(int irq, void *data)
 
 	spu = data;
 
+	spin_lock(&spu->register_lock);
 	mask = spu_int_mask_get(spu, 0);
-	stat = spu_int_stat_get(spu, 0);
-	stat &= mask;
+	stat = spu_int_stat_get(spu, 0) & mask;
 
-	spin_lock(&spu->register_lock);
 	spu->class_0_pending |= stat;
+	spu->dsisr = spu_mfc_dsisr_get(spu);
+	spu->dar = spu_mfc_dar_get(spu);
 	spin_unlock(&spu->register_lock);
 
 	spu->stop_callback(spu);
@@ -350,31 +332,6 @@ spu_irq_class_0(int irq, void *data)
 	return IRQ_HANDLED;
 }
 
-int
-spu_irq_class_0_bottom(struct spu *spu)
-{
-	unsigned long flags;
-	unsigned long stat;
-
-	spin_lock_irqsave(&spu->register_lock, flags);
-	stat = spu->class_0_pending;
-	spu->class_0_pending = 0;
-
-	if (stat & CLASS0_DMA_ALIGNMENT_INTR)
-		__spu_trap_dma_align(spu);
-
-	if (stat & CLASS0_INVALID_DMA_COMMAND_INTR)
-		__spu_trap_invalid_dma(spu);
-
-	if (stat & CLASS0_SPU_ERROR_INTR)
-		__spu_trap_error(spu);
-
-	spin_unlock_irqrestore(&spu->register_lock, flags);
-
-	return (stat & CLASS0_INTR_MASK) ? -EIO : 0;
-}
-EXPORT_SYMBOL_GPL(spu_irq_class_0_bottom);
-
 static irqreturn_t
 spu_irq_class_1(int irq, void *data)
 {

arch/powerpc/platforms/cell/spufs/fault.c

@@ -28,46 +28,69 @@
 
 #include "spufs.h"
 
-static void spufs_handle_dma_error(struct spu_context *ctx,
+/**
+ * Handle an SPE event, depending on context SPU_CREATE_EVENTS_ENABLED flag.
+ *
+ * If the context was created with events, we just set the return event.
+ * Otherwise, send an appropriate signal to the process.
+ */
+static void spufs_handle_event(struct spu_context *ctx,
 				unsigned long ea, int type)
 {
+	siginfo_t info;
+
 	if (ctx->flags & SPU_CREATE_EVENTS_ENABLED) {
 		ctx->event_return |= type;
 		wake_up_all(&ctx->stop_wq);
-	} else {
-		siginfo_t info;
-		memset(&info, 0, sizeof(info));
-
-		switch (type) {
-		case SPE_EVENT_INVALID_DMA:
-			info.si_signo = SIGBUS;
-			info.si_code = BUS_OBJERR;
-			break;
-		case SPE_EVENT_SPE_DATA_STORAGE:
-			info.si_signo = SIGBUS;
-			info.si_addr = (void __user *)ea;
-			info.si_code = BUS_ADRERR;
-			break;
-		case SPE_EVENT_DMA_ALIGNMENT:
-			info.si_signo = SIGBUS;
-			/* DAR isn't set for an alignment fault :( */
-			info.si_code = BUS_ADRALN;
-			break;
-		case SPE_EVENT_SPE_ERROR:
-			info.si_signo = SIGILL;
-			info.si_addr = (void __user *)(unsigned long)
-				ctx->ops->npc_read(ctx) - 4;
-			info.si_code = ILL_ILLOPC;
-			break;
-		}
-		if (info.si_signo)
-			force_sig_info(info.si_signo, &info, current);
+		return;
 	}
+
+	memset(&info, 0, sizeof(info));
+
+	switch (type) {
+	case SPE_EVENT_INVALID_DMA:
+		info.si_signo = SIGBUS;
+		info.si_code = BUS_OBJERR;
+		break;
+	case SPE_EVENT_SPE_DATA_STORAGE:
+		info.si_signo = SIGBUS;
+		info.si_addr = (void __user *)ea;
+		info.si_code = BUS_ADRERR;
+		break;
+	case SPE_EVENT_DMA_ALIGNMENT:
+		info.si_signo = SIGBUS;
+		/* DAR isn't set for an alignment fault :( */
+		info.si_code = BUS_ADRALN;
+		break;
+	case SPE_EVENT_SPE_ERROR:
+		info.si_signo = SIGILL;
+		info.si_addr = (void __user *)(unsigned long)
+			ctx->ops->npc_read(ctx) - 4;
+		info.si_code = ILL_ILLOPC;
+		break;
+	}
+
+	if (info.si_signo)
+		force_sig_info(info.si_signo, &info, current);
 }
 
-void spufs_dma_callback(struct spu *spu, int type)
+int spufs_handle_class0(struct spu_context *ctx)
 {
-	spufs_handle_dma_error(spu->ctx, spu->dar, type);
+	unsigned long stat = ctx->csa.class_0_pending & CLASS0_INTR_MASK;
+
+	if (likely(!stat))
+		return 0;
+
+	if (stat & CLASS0_DMA_ALIGNMENT_INTR)
+		spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_DMA_ALIGNMENT);
+
+	if (stat & CLASS0_INVALID_DMA_COMMAND_INTR)
+		spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_INVALID_DMA);
+
+	if (stat & CLASS0_SPU_ERROR_INTR)
+		spufs_handle_event(ctx, ctx->csa.dar, SPE_EVENT_SPE_ERROR);
+
+	return -EIO;
 }
 
 /*
@@ -95,16 +118,8 @@ int spufs_handle_class1(struct spu_context *ctx)
 	 * in time, we can still expect to get the same fault
 	 * the immediately after the context restore.
 	 */
-	if (ctx->state == SPU_STATE_RUNNABLE) {
-		ea = ctx->spu->dar;
-		dsisr = ctx->spu->dsisr;
-		ctx->spu->dar= ctx->spu->dsisr = 0;
-	} else {
-		ea = ctx->csa.priv1.mfc_dar_RW;
-		dsisr = ctx->csa.priv1.mfc_dsisr_RW;
-		ctx->csa.priv1.mfc_dar_RW = 0;
-		ctx->csa.priv1.mfc_dsisr_RW = 0;
-	}
+	ea = ctx->csa.dar;
+	dsisr = ctx->csa.dsisr;
 
 	if (!(dsisr & (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED)))
 		return 0;
@@ -132,6 +147,14 @@ int spufs_handle_class1(struct spu_context *ctx)
 		ret = spu_handle_mm_fault(current->mm, ea, dsisr, &flt);
 
 	spu_acquire(ctx);
+
+	/*
+	 * Clear dsisr under ctxt lock after handling the fault, so that
+	 * time slicing will not preempt the context while the page fault
+	 * handler is running. Context switch code removes mappings.
+	 */
+	ctx->csa.dar = ctx->csa.dsisr = 0;
+
 	/*
 	 * If we handled the fault successfully and are in runnable
 	 * state, restart the DMA.
@@ -152,7 +175,7 @@ int spufs_handle_class1(struct spu_context *ctx)
 		if (ctx->spu)
 			ctx->ops->restart_dma(ctx);
 	} else
-		spufs_handle_dma_error(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE);
+		spufs_handle_event(ctx, ea, SPE_EVENT_SPE_DATA_STORAGE);
 
 	spuctx_switch_state(ctx, SPU_UTIL_SYSTEM);
 	return ret;

arch/powerpc/platforms/cell/spufs/run.c

@@ -15,7 +15,30 @@ void spufs_stop_callback(struct spu *spu)
 {
 	struct spu_context *ctx = spu->ctx;
 
-	wake_up_all(&ctx->stop_wq);
+	/*
+	 * It should be impossible to preempt a context while an exception
+	 * is being processed, since the context switch code is specially
+	 * coded to deal with interrupts ... But, just in case, sanity check
+	 * the context pointer.  It is OK to return doing nothing since
+	 * the exception will be regenerated when the context is resumed.
+	 */
+	if (ctx) {
+		/* Copy exception arguments into module specific structure */
+		ctx->csa.class_0_pending = spu->class_0_pending;
+		ctx->csa.dsisr = spu->dsisr;
+		ctx->csa.dar = spu->dar;
+
+		/* ensure that the exception status has hit memory before a
+		 * thread waiting on the context's stop queue is woken */
+		smp_wmb();
+
+		wake_up_all(&ctx->stop_wq);
+	}
+
+	/* Clear callback arguments from spu structure */
+	spu->class_0_pending = 0;
+	spu->dsisr = 0;
+	spu->dar = 0;
 }
 
 static inline int spu_stopped(struct spu_context *ctx, u32 *stat)
@@ -29,9 +52,9 @@ static inline int spu_stopped(struct spu_context *ctx, u32 *stat)
 	if (ctx->state != SPU_STATE_RUNNABLE ||
 	    test_bit(SPU_SCHED_NOTIFY_ACTIVE, &ctx->sched_flags))
 		return 1;
-	pte_fault = spu->dsisr &
+	pte_fault = ctx->csa.dsisr &
 	    (MFC_DSISR_PTE_NOT_FOUND | MFC_DSISR_ACCESS_DENIED);
-	return (!(*stat & SPU_STATUS_RUNNING) || pte_fault || spu->class_0_pending) ?
+	return (!(*stat & SPU_STATUS_RUNNING) || pte_fault || ctx->csa.class_0_pending) ?
 		1 : 0;
 }
 
@@ -287,18 +310,6 @@ static int spu_process_callback(struct spu_context *ctx)
 	return ret;
 }
 
-static inline int spu_process_events(struct spu_context *ctx)
-{
-	struct spu *spu = ctx->spu;
-	int ret = 0;
-
-	if (spu->class_0_pending)
-		ret = spu_irq_class_0_bottom(spu);
-	if (!ret && signal_pending(current))
-		ret = -ERESTARTSYS;
-	return ret;
-}
-
 long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 {
 	int ret;
@@ -364,13 +375,20 @@ long spufs_run_spu(struct spu_context *ctx, u32 *npc, u32 *event)
 		if (ret)
 			break;
 
+		ret = spufs_handle_class0(ctx);
+		if (ret)
+			break;
+
 		if (unlikely(ctx->state != SPU_STATE_RUNNABLE)) {
 			ret = spu_reacquire_runnable(ctx, npc, &status);
 			if (ret)
 				goto out2;
 			continue;
 		}
-		ret = spu_process_events(ctx);
+
+		if (signal_pending(current))
+			ret = -ERESTARTSYS;
+
 
 	} while (!ret && !(status & (SPU_STATUS_STOPPED_BY_STOP |
 				      SPU_STATUS_STOPPED_BY_HALT |

arch/powerpc/platforms/cell/spufs/sched.c

@@ -245,7 +245,6 @@ static void spu_bind_context(struct spu *spu, struct spu_context *ctx)
 	spu->wbox_callback = spufs_wbox_callback;
 	spu->stop_callback = spufs_stop_callback;
 	spu->mfc_callback = spufs_mfc_callback;
-	spu->dma_callback = spufs_dma_callback;
 	mb();
 	spu_unmap_mappings(ctx);
 	spu_restore(&ctx->csa, spu);
@@ -433,7 +432,6 @@ static void spu_unbind_context(struct spu *spu, struct spu_context *ctx)
 	spu->wbox_callback = NULL;
 	spu->stop_callback = NULL;
 	spu->mfc_callback = NULL;
-	spu->dma_callback = NULL;
 	spu_associate_mm(spu, NULL);
 	spu->pid = 0;
 	spu->tgid = 0;

arch/powerpc/platforms/cell/spufs/spufs.h

@@ -222,6 +222,7 @@ void spu_gang_add_ctx(struct spu_gang *gang, struct spu_context *ctx);
 
 /* fault handling */
 int spufs_handle_class1(struct spu_context *ctx);
+int spufs_handle_class0(struct spu_context *ctx);
 
 /* affinity */
 struct spu *affinity_check(struct spu_context *ctx);

arch/powerpc/platforms/cell/spufs/switch.c

@@ -2077,10 +2077,6 @@ int spu_save(struct spu_state *prev, struct spu *spu)
 	int rc;
 
 	acquire_spu_lock(spu);	        /* Step 1.     */
-	prev->dar = spu->dar;
-	prev->dsisr = spu->dsisr;
-	spu->dar = 0;
-	spu->dsisr = 0;
 	rc = __do_spu_save(prev, spu);	/* Steps 2-53. */
 	release_spu_lock(spu);
 	if (rc != 0 && rc != 2 && rc != 6) {
@@ -2107,9 +2103,6 @@ int spu_restore(struct spu_state *new, struct spu *spu)
 	acquire_spu_lock(spu);
 	harvest(NULL, spu);
 	spu->slb_replace = 0;
-	new->dar = 0;
-	new->dsisr = 0;
-	spu->class_0_pending = 0;
 	rc = __do_spu_restore(new, spu);
 	release_spu_lock(spu);
 	if (rc) {

include/asm-powerpc/spu.h

@@ -146,7 +146,6 @@ struct spu {
 	void (* ibox_callback)(struct spu *spu);
 	void (* stop_callback)(struct spu *spu);
 	void (* mfc_callback)(struct spu *spu);
-	void (* dma_callback)(struct spu *spu, int type);
 
 	char irq_c0[8];
 	char irq_c1[8];
@@ -197,8 +196,6 @@ struct cbe_spu_info {
 extern struct cbe_spu_info cbe_spu_info[];
 
 void spu_init_channels(struct spu *spu);
-int spu_irq_class_0_bottom(struct spu *spu);
-int spu_irq_class_1_bottom(struct spu *spu);
 void spu_irq_setaffinity(struct spu *spu, int cpu);
 
 void spu_setup_kernel_slbs(struct spu *spu, struct spu_lscsa *lscsa,

include/asm-powerpc/spu_csa.h

@@ -254,7 +254,7 @@ struct spu_state {
 	u64 spu_chnldata_RW[32];
 	u32 spu_mailbox_data[4];
 	u32 pu_mailbox_data[1];
-	u64 dar, dsisr;
+	u64 dar, dsisr, class_0_pending;
 	unsigned long suspend_time;
 	spinlock_t register_lock;
 };