enic: Add new fw devcmd to set mac address of an interface

This patch adds a new devcmd CMD_SET_MAC_ADDR to set the mac address of an
interface.
Signed-off-by: Roopa Prabhu <roprabhu@cisco.com>
Signed-off-by: Christian Benvenuti <benve@cisco.com>
Signed-off-by: Sujith Sankar <ssujith@cisco.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

drivers/net/ethernet/cisco/enic/enic.h

@@ -32,7 +32,7 @@
 
 #define DRV_NAME		"enic"
 #define DRV_DESCRIPTION		"Cisco VIC Ethernet NIC Driver"
-#define DRV_VERSION		"2.1.1.35"
+#define DRV_VERSION		"2.1.1.36"
 #define DRV_COPYRIGHT		"Copyright 2008-2011 Cisco Systems, Inc"
 
 #define ENIC_BARS_MAX		6

drivers/net/ethernet/cisco/enic/vnic_dev.c

@@ -1023,3 +1023,15 @@ int vnic_dev_deinit_done(struct vnic_dev *vdev, int *status)
 {
 	return vnic_dev_cmd_status(vdev, CMD_DEINIT, status);
 }
+
+int vnic_dev_set_mac_addr(struct vnic_dev *vdev, u8 *mac_addr)
+{
+	u64 a0, a1;
+	int wait = 1000;
+	int i;
+
+	for (i = 0; i < ETH_ALEN; i++)
+		((u8 *)&a0)[i] = mac_addr[i];
+
+	return vnic_dev_cmd(vdev, CMD_SET_MAC_ADDR, &a0, &a1, wait);
+}

drivers/net/ethernet/cisco/enic/vnic_dev.h

@@ -131,5 +131,6 @@ int vnic_dev_init_prov2(struct vnic_dev *vdev, u8 *buf, u32 len);
 int vnic_dev_enable2(struct vnic_dev *vdev, int active);
 int vnic_dev_enable2_done(struct vnic_dev *vdev, int *status);
 int vnic_dev_deinit_done(struct vnic_dev *vdev, int *status);
+int vnic_dev_set_mac_addr(struct vnic_dev *vdev, u8 *mac_addr);
 
 #endif /* _VNIC_DEV_H_ */

drivers/net/ethernet/cisco/enic/vnic_devcmd.h

@@ -337,6 +337,15 @@ enum vnic_devcmd_cmd {
 	 *      (u32)a2 = maximum timer value in usec
 	 */
 	CMD_INTR_COAL_CONVERT = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 50),
+
+	/*
+	 * cmd_set_mac_addr
+	 *	set mac address
+	 * in:
+	 *   (u48)a0 = mac addr
+	 *
+	 */
+	CMD_SET_MAC_ADDR = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 55),
 };
 
 /* CMD_ENABLE2 flags */