Merge tag 'renesas-arm64-dt-for-v5.3' of...

Merge tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into arm/dt

Renesas ARM64 Based SoC DT Updates for v5.3

* Renesas SoCs
  - Revise usb2_phy nodes and phys properties according to updated bindings
  - Use ip=on for bootargs

* R-Car Gen 3 and RZ/G2M (r8a774a1) SoCs
  - Add dynamic power coefficient
  - Create thermal zone to support IPA

* R-Car E3 (r8a77990) and D3 (r8a77995) SoCs
  - Point LVDS0 to its companion LVDS1

* R-Car E3 (r8a77990) SoC
  - Corresct register range of DU

* R-Car E3 (r8a77990) based Ebisu board
  - Remove renesas, no-ether-link property

* R-Car D3 (r8a77995) based Draak board:
  - Remove unnecessary index from vin4 port

* RZ/G2M (r8a774a1) based HiHope main and sub-boards:
  - Initial support
  - Describe CPU capacity and topoligy
  - Enable CMT, HDMI, LEDs, PCIe RWDT, SCIF, SDHI, TMU, and USB 2.0 and 3.0

* RZ/G2E (r8a774c0) SoC based EK874 board:
  - Clean up CPU compatible strings
  - Enable: Bluetooth, HDMI audio and video, TPU, USB 3.0 and WLAN

* tag 'renesas-arm64-dt-for-v5.3' of https://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas: (53 commits)
  arm64: dts: renesas: hihope-common: Remove "label" from LEDs
  arm64: dts: renesas: hihope-common: Add HDMI support
  arm64: dts: renesas: r8a774a1: Add HDMI encoder instance
  arm64: dts: renesas: r8a774a1: Add dynamic power coefficient
  arm64: dts: renesas: r8a774a1: Create thermal zone to support IPA
  arm64: dts: renesas: r8a774a1: Add CPU capacity-dmips-mhz
  arm64: dts: renesas: r8a774a1: Add CPU topology on r8a774a1 SoC
  arm64: dts: renesas: hihope-common: Add LEDs support
  arm64: dts: renesas: hihope-common: Enable USB3.0
  arm64: dts: renesas: hihope-common: Add USB 2.0 support
  arm64: dts: renesas: r8a774a1: Fix USB 2.0 clocks
  arm64: dts: renesas: r8a774a1: Add TMU device nodes
  arm64: dts: renesas: r8a774a1: Add CMT device nodes
  arm64: dts: renesas: hihope-common: Add uSD and eMMC
  arm64: dts: renesas: r8a77990: Fix register range of display node
  arm64: dts: renesas: cat874: Enable usb role switch support
  arm64: dts: renesas: cat874: Enable USB3.0 host/peripheral device node
  arm64: dts: renesas: r8a7799[05]: Point LVDS0 to its companion LVDS1
  arm64: dts: renesas: hihope-common: Add RWDT support
  arm64: dts: renesas: hihope-rzg2-ex: Enable PCIe support
  ...
Signed-off-by: Olof Johansson <olof@lixom.net>

arch/arm64/boot/dts/renesas/Makefile

 # SPDX-License-Identifier: GPL-2.0
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m.dtb
+dtb-$(CONFIG_ARCH_R8A774A1) += r8a774a1-hihope-rzg2m-ex.dtb
 dtb-$(CONFIG_ARCH_R8A774C0) += r8a774c0-cat874.dtb r8a774c0-ek874.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-salvator-x.dtb r8a7795-h3ulcb.dtb
 dtb-$(CONFIG_ARCH_R8A7795) += r8a7795-h3ulcb-kf.dtb

arch/arm64/boot/dts/renesas/hihope-common.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2[MN] main board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include <dt-bindings/gpio/gpio.h>
+
+/ {
+	aliases {
+		serial0 = &scif2;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel";
+		stdout-path = "serial0:115200n8";
+	};
+
+	hdmi0-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi0_con: endpoint {
+				remote-endpoint = <&rcar_dw_hdmi0_out>;
+			};
+		};
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led0 {
+			gpios = <&gpio6 11 GPIO_ACTIVE_HIGH>;
+		};
+
+		led1 {
+			gpios = <&gpio6 12 GPIO_ACTIVE_HIGH>;
+		};
+
+		led2 {
+			gpios = <&gpio6 13 GPIO_ACTIVE_HIGH>;
+		};
+
+		led3 {
+			gpios = <&gpio0  0 GPIO_ACTIVE_HIGH>;
+		};
+	};
+
+	reg_1p8v: regulator0 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-1.8V";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	reg_3p3v: regulator1 {
+		compatible = "regulator-fixed";
+		regulator-name = "fixed-3.3V";
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+		regulator-boot-on;
+		regulator-always-on;
+	};
+
+	vbus0_usb2: regulator-vbus0-usb2 {
+		compatible = "regulator-fixed";
+
+		regulator-name = "USB20_VBUS0";
+		regulator-min-microvolt = <5000000>;
+		regulator-max-microvolt = <5000000>;
+
+		gpio = <&gpio6 16 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	vccq_sdhi0: regulator-vccq-sdhi0 {
+		compatible = "regulator-gpio";
+
+		regulator-name = "SDHI0 VccQ";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpios = <&gpio6 30 GPIO_ACTIVE_HIGH>;
+		gpios-states = <1>;
+		states = <3300000 1
+			  1800000 0>;
+	};
+
+	x302_clk: x302-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <33000000>;
+	};
+
+	x304_clk: x304-clock {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <25000000>;
+	};
+};
+
+&du {
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&cpg CPG_MOD 722>,
+		 <&versaclock5 1>,
+		 <&x302_clk>,
+		 <&versaclock5 2>;
+	clock-names = "du.0", "du.1", "du.2",
+		      "dclkin.0", "dclkin.1", "dclkin.2";
+	status = "okay";
+};
+
+&ehci0 {
+	status = "okay";
+};
+
+&ehci1 {
+	status = "okay";
+};
+
+&extal_clk {
+	clock-frequency = <16666666>;
+};
+
+&extalr_clk {
+	clock-frequency = <32768>;
+};
+
+&gpio6 {
+	usb1-reset {
+		gpio-hog;
+		gpios = <10 GPIO_ACTIVE_LOW>;
+		output-low;
+		line-name = "usb1-reset";
+	};
+};
+
+&hdmi0 {
+	status = "okay";
+
+	ports {
+		port@1 {
+			reg = <1>;
+			rcar_dw_hdmi0_out: endpoint {
+				remote-endpoint = <&hdmi0_con>;
+			};
+		};
+	};
+};
+
+&hsusb {
+	dr_mode = "otg";
+	status = "okay";
+};
+
+&i2c4 {
+	clock-frequency = <400000>;
+	status = "okay";
+
+	versaclock5: clock-generator@6a {
+		compatible = "idt,5p49v5923";
+		reg = <0x6a>;
+		#clock-cells = <1>;
+		clocks = <&x304_clk>;
+		clock-names = "xin";
+	};
+};
+
+&ohci0 {
+	status = "okay";
+};
+
+&ohci1 {
+	status = "okay";
+};
+
+&pcie_bus_clk {
+	clock-frequency = <100000000>;
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	scif2_pins: scif2 {
+		groups = "scif2_data_a";
+		function = "scif2";
+	};
+
+	scif_clk_pins: scif_clk {
+		groups = "scif_clk_a";
+		function = "scif_clk";
+	};
+
+	sdhi0_pins: sd0 {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <3300>;
+	};
+
+	sdhi0_pins_uhs: sd0_uhs {
+		groups = "sdhi0_data4", "sdhi0_ctrl";
+		function = "sdhi0";
+		power-source = <1800>;
+	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data8", "sdhi3_ctrl", "sdhi3_ds";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	usb0_pins: usb0 {
+		groups = "usb0";
+		function = "usb0";
+	};
+
+	usb1_pins: usb1 {
+		mux {
+			groups = "usb1";
+			function = "usb1";
+		};
+
+		ovc {
+			pins = "GP_6_27";
+			bias-pull-up;
+		};
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30";
+		function = "usb30";
+	};
+};
+
+&rwdt {
+	timeout-sec = <60>;
+	status = "okay";
+};
+
+&scif2 {
+	pinctrl-0 = <&scif2_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&scif_clk {
+	clock-frequency = <14745600>;
+};
+
+&sdhi0 {
+	pinctrl-0 = <&sdhi0_pins>;
+	pinctrl-1 = <&sdhi0_pins_uhs>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&vccq_sdhi0>;
+	cd-gpios = <&gpio3 12 GPIO_ACTIVE_LOW>;
+	bus-width = <4>;
+	sd-uhs-sdr50;
+	sd-uhs-sdr104;
+	status = "okay";
+};
+
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-1 = <&sdhi3_pins>;
+	pinctrl-names = "default", "state_uhs";
+
+	vmmc-supply = <&reg_3p3v>;
+	vqmmc-supply = <&reg_1p8v>;
+	bus-width = <8>;
+	mmc-hs200-1_8v;
+	non-removable;
+	fixed-emmc-driver-type = <1>;
+};
+
+&usb_extal_clk {
+	clock-frequency = <50000000>;
+};
+
+&usb2_phy0 {
+	pinctrl-0 = <&usb0_pins>;
+	pinctrl-names = "default";
+
+	vbus-supply = <&vbus0_usb2>;
+	status = "okay";
+};
+
+&usb2_phy1 {
+	pinctrl-0 = <&usb1_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};
+
+&usb3_peri0 {
+	phys = <&usb3_phy0>;
+	phy-names = "usb";
+
+	companion = <&xhci0>;
+
+	status = "okay";
+};
+
+&usb3_phy0 {
+	status = "okay";
+};
+
+&usb3s0_clk {
+	clock-frequency = <100000000>;
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

arch/arm64/boot/dts/renesas/hihope-rzg2-ex.dtsi

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the RZ/G2[MN] HiHope sub board common parts
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/ {
+	aliases {
+		ethernet0 = &avb;
+	};
+
+	chosen {
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
+	};
+};
+
+&avb {
+	pinctrl-0 = <&avb_pins>;
+	pinctrl-names = "default";
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-txid";
+	status = "okay";
+
+	phy0: ethernet-phy@0 {
+		rxc-skew-ps = <1500>;
+		reg = <0>;
+		interrupt-parent = <&gpio2>;
+		interrupts = <11 IRQ_TYPE_LEVEL_LOW>;
+		reset-gpios = <&gpio2 10 GPIO_ACTIVE_LOW>;
+	};
+};
+
+&pciec0 {
+	status = "okay";
+};
+
+&pciec1 {
+	status = "okay";
+};
+
+&pfc {
+	pinctrl-0 = <&scif_clk_pins>;
+	pinctrl-names = "default";
+
+	avb_pins: avb {
+		mux {
+			groups = "avb_link", "avb_mdio", "avb_mii";
+			function = "avb";
+		};
+
+		pins_mdio {
+			groups = "avb_mdio";
+			drive-strength = <24>;
+		};
+
+		pins_mii_tx {
+			pins = "PIN_AVB_TX_CTL", "PIN_AVB_TXC", "PIN_AVB_TD0",
+			       "PIN_AVB_TD1", "PIN_AVB_TD2", "PIN_AVB_TD3";
+			drive-strength = <12>;
+		};
+	};
+};

arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m-ex.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M sub board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+#include "r8a774a1-hihope-rzg2m.dts"
+#include "hihope-rzg2-ex.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M with sub board";
+	compatible = "hoperun,hihope-rzg2-ex", "hoperun,hihope-rzg2m",
+		     "renesas,r8a774a1";
+};

arch/arm64/boot/dts/renesas/r8a774a1-hihope-rzg2m.dts

+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Device Tree Source for the HiHope RZ/G2M main board
+ *
+ * Copyright (C) 2019 Renesas Electronics Corp.
+ */
+
+/dts-v1/;
+#include "r8a774a1.dtsi"
+#include "hihope-common.dtsi"
+
+/ {
+	model = "HopeRun HiHope RZ/G2M main board based on r8a774a1";
+	compatible = "hoperun,hihope-rzg2m", "renesas,r8a774a1";
+
+	memory@48000000 {
+		device_type = "memory";
+		/* first 128MB is reserved for secure area. */
+		reg = <0x0 0x48000000 0x0 0x78000000>;
+	};
+
+	memory@600000000 {
+		device_type = "memory";
+		reg = <0x6 0x00000000 0x0 0x80000000>;
+	};
+};

arch/arm64/boot/dts/renesas/r8a774c0-cat874.dts

@@ -8,6 +8,7 @@
 /dts-v1/;
 #include "r8a774c0.dtsi"
 #include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/display/tda998x.h>
 
 / {
 	model = "Silicon Linux RZ/G2E 96board platform (CAT874)";
@@ -15,13 +16,25 @@ / {
 
 	aliases {
 		serial0 = &scif2;
+		serial1 = &hscif2;
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};
 
+	hdmi-out {
+		compatible = "hdmi-connector";
+		type = "a";
+
+		port {
+			hdmi_con_out: endpoint {
+				remote-endpoint = <&tda19988_out>;
+			};
+		};
+	};
+
 	leds {
 		compatible = "gpio-leds";
 
@@ -52,6 +65,23 @@ memory@48000000 {
 		reg = <0x0 0x48000000 0x0 0x78000000>;
 	};
 
+	sound: sound {
+		compatible = "simple-audio-card";
+
+		simple-audio-card,name = "CAT874 HDMI sound";
+		simple-audio-card,format = "i2s";
+		simple-audio-card,bitclock-master = <&sndcpu>;
+		simple-audio-card,frame-master = <&sndcpu>;
+
+		sndcpu: simple-audio-card,cpu {
+			sound-dai = <&rcar_sound>;
+		};
+
+		sndcodec: simple-audio-card,codec {
+			sound-dai = <&tda19988>;
+		};
+	};
+
 	vcc_sdhi0: regulator-vcc-sdhi0 {
 		compatible = "regulator-fixed";
 
@@ -74,6 +104,46 @@ vccq_sdhi0: regulator-vccq-sdhi0 {
 		states = <3300000 1
 			  1800000 0>;
 	};
+
+	wlan_en_reg: fixedregulator {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+		regulator-min-microvolt = <1800000>;
+		regulator-max-microvolt = <1800000>;
+		startup-delay-us = <70000>;
+
+		gpio = <&gpio2 25 GPIO_ACTIVE_HIGH>;
+		enable-active-high;
+	};
+
+	x13_clk: x13 {
+		compatible = "fixed-clock";
+		#clock-cells = <0>;
+		clock-frequency = <74250000>;
+	};
+};
+
+&audio_clk_a {
+	clock-frequency = <22579200>;
+};
+
+&du {
+	pinctrl-0 = <&du_pins>;
+	pinctrl-names = "default";
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 724>,
+		 <&cpg CPG_MOD 723>,
+		 <&x13_clk>;
+	clock-names = "du.0", "du.1", "dclkin.0";
+
+	ports {
+		port@0 {
+			endpoint {
+				remote-endpoint = <&tda19988_in>;
+			};
+		};
+	};
 };
 
 &ehci0 {
@@ -85,6 +155,81 @@ &extal_clk {
 	clock-frequency = <48000000>;
 };
 
+&hscif2 {
+	pinctrl-0 = <&hscif2_pins>;
+	pinctrl-names = "default";
+
+	uart-has-rtscts;
+	status = "okay";
+
+	bluetooth {
+		compatible = "ti,wl1837-st";
+		enable-gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
+	};
+};
+
+&i2c0 {
+	status = "okay";
+	clock-frequency = <100000>;
+
+	hd3ss3220@47 {
+		compatible = "ti,hd3ss3220";
+		reg = <0x47>;
+		interrupt-parent = <&gpio6>;
+		interrupts = <3 IRQ_TYPE_LEVEL_LOW>;
+
+		connector {
+			compatible = "usb-c-connector";
+			label = "USB-C";
+			data-role = "dual";
+
+			ports {
+				#address-cells = <1>;
+				#size-cells = <0>;
+
+				port@1 {
+					reg = <1>;
+					hd3ss3220_ep: endpoint {
+						remote-endpoint = <&usb3_role_switch>;
+					};
+				};
+			};
+		};
+	};
+
+	tda19988: tda19988@70 {
+		compatible = "nxp,tda998x";
+		reg = <0x70>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
+
+		video-ports = <0x234501>;
+
+		#sound-dai-cells = <0>;
+		audio-ports = <TDA998x_I2S 0x03>;
+		clocks = <&rcar_sound 1>;
+
+		ports {
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			port@0 {
+				reg = <0>;
+				tda19988_in: endpoint {
+					remote-endpoint = <&du_out_rgb>;
+				};
+			};
+
+			port@1 {
+				reg = <1>;
+				tda19988_out: endpoint {
+					remote-endpoint = <&hdmi_con_out>;
+				};
+			};
+		};
+	};
+};
+
 &i2c1 {
 	pinctrl-0 = <&i2c1_pins>;
 	pinctrl-names = "default";
@@ -98,6 +243,13 @@ rtc@32 {
 	};
 };
 
+&lvds0 {
+	status = "okay";
+
+	clocks = <&cpg CPG_MOD 727>, <&x13_clk>, <&extal_clk>;
+	clock-names = "fck", "dclkin.0", "extal";
+};
+
 &ohci0 {
 	dr_mode = "host";
 	status = "okay";
@@ -113,11 +265,22 @@ &pciec0 {
 };
 
 &pfc {
+	du_pins: du {
+		groups = "du_rgb888", "du_clk_out_0", "du_sync", "du_disp",
+			 "du_clk_in_0";
+		function = "du";
+	};
+
 	i2c1_pins: i2c1 {
 		groups = "i2c1_b";
 		function = "i2c1";
 	};
 
+	hscif2_pins: hscif2 {
+		groups = "hscif2_data_a", "hscif2_ctrl_a";
+		function = "hscif2";
+	};
+
 	scif2_pins: scif2 {
 		groups = "scif2_data_a";
 		function = "scif2";
@@ -134,6 +297,47 @@ sdhi0_pins_uhs: sd0_uhs {
 		function = "sdhi0";
 		power-source = <1800>;
 	};
+
+	sdhi3_pins: sd3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <1800>;
+	};
+
+	sound_pins: sound {
+		groups = "ssi01239_ctrl", "ssi0_data";
+		function = "ssi";
+	};
+
+	sound_clk_pins: sound_clk {
+		groups = "audio_clkout1_a";
+		function = "audio_clk";
+	};
+
+	usb30_pins: usb30 {
+		groups = "usb30", "usb30_id";
+		function = "usb30";
+	};
+};
+
+&rcar_sound {
+	pinctrl-0 = <&sound_pins &sound_clk_pins>;
+	pinctrl-names = "default";
+
+	/* Single DAI */
+	#sound-dai-cells = <0>;
+
+	/* audio_clkout0/1/2/3 */
+	#clock-cells = <1>;
+	clock-frequency = <11289600>;
+
+	status = "okay";
+
+	rcar_sound,dai {
+		dai0 {
+			playback = <&ssi0 &src0 &dvc0>;
+		};
+	};
 };
 
 &rwdt {
@@ -162,7 +366,47 @@ &sdhi0 {
 	status = "okay";
 };
 
+&sdhi3 {
+	status = "okay";
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en_reg>;
+	bus-width = <4>;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+	};
+};
+
 &usb2_phy0 {
 	renesas,no-otg-pins;
 	status = "okay";
 };
+
+&usb3_peri0 {
+	companion = <&xhci0>;
+	status = "okay";
+	usb-role-switch;
+
+	port {
+		usb3_role_switch: endpoint {
+			remote-endpoint = <&hd3ss3220_ep>;
+		};
+	};
+};
+
+&xhci0 {
+	pinctrl-0 = <&usb30_pins>;
+	pinctrl-names = "default";
+
+	status = "okay";
+};

arch/arm64/boot/dts/renesas/r8a774c0.dtsi

@@ -70,7 +70,7 @@ cpus {
 		#size-cells = <0>;
 
 		a53_0: cpu@0 {
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <0>;
 			device_type = "cpu";
 			power-domains = <&sysc R8A774C0_PD_CA53_CPU0>;
@@ -81,7 +81,7 @@ a53_0: cpu@0 {
 		};
 
 		a53_1: cpu@1 {
-			compatible = "arm,cortex-a53", "arm,armv8";
+			compatible = "arm,cortex-a53";
 			reg = <1>;
 			device_type = "cpu";
 			power-domains = <&sysc R8A774C0_PD_CA53_CPU1>;
@@ -684,7 +684,7 @@ hsusb: usb@e6590000 {
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 704>, <&cpg 703>;
@@ -1580,7 +1580,7 @@ ohci0: usb@ee080000 {
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
@@ -1592,7 +1592,7 @@ ehci0: usb@ee080100 {
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
@@ -1608,7 +1608,7 @@ usb2_phy0: usb-phy@ee080200 {
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A774C0_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 

arch/arm64/boot/dts/renesas/r8a7795.dtsi

@@ -155,6 +155,7 @@ a57_0: cpu@0 {
 			power-domains = <&sysc R8A7795_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
 			clocks = <&cpg CPG_CORE R8A7795_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 			capacity-dmips-mhz = <1024>;
@@ -207,6 +208,8 @@ a53_0: cpu@100 {
 			power-domains = <&sysc R8A7795_PD_CA53_CPU0>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
 			clocks = <&cpg CPG_CORE R8A7795_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
 			capacity-dmips-mhz = <535>;
@@ -812,7 +815,7 @@ hsusb: usb@e6590000 {
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 704>, <&cpg 703>;
@@ -829,7 +832,7 @@ hsusb3: usb@e659c000 {
 			       <&usb_dmac3 0>, <&usb_dmac3 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy3>;
+			phys = <&usb2_phy3 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 705>, <&cpg 700>;
@@ -1450,6 +1453,17 @@ scif5: serial@e6f30000 {
 			status = "disabled";
 		};
 
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7795", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		msiof0: spi@e6e90000 {
 			compatible = "renesas,msiof-r8a7795",
 				     "renesas,rcar-gen3-msiof";
@@ -2405,7 +2419,7 @@ ohci0: usb@ee080000 {
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
@@ -2417,7 +2431,7 @@ ohci1: usb@ee0a0000 {
 			reg = <0 0xee0a0000 0 0x100>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>;
-			phys = <&usb2_phy1>;
+			phys = <&usb2_phy1 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
@@ -2429,7 +2443,7 @@ ohci2: usb@ee0c0000 {
 			reg = <0 0xee0c0000 0 0x100>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 701>;
-			phys = <&usb2_phy2>;
+			phys = <&usb2_phy2 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 701>;
@@ -2441,7 +2455,7 @@ ohci3: usb@ee0e0000 {
 			reg = <0 0xee0e0000 0 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
-			phys = <&usb2_phy3>;
+			phys = <&usb2_phy3 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 700>, <&cpg 705>;
@@ -2453,7 +2467,7 @@ ehci0: usb@ee080100 {
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2466,7 +2480,7 @@ ehci1: usb@ee0a0100 {
 			reg = <0 0xee0a0100 0 0x100>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>;
-			phys = <&usb2_phy1>;
+			phys = <&usb2_phy1 2>;
 			phy-names = "usb";
 			companion = <&ohci1>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2479,7 +2493,7 @@ ehci2: usb@ee0c0100 {
 			reg = <0 0xee0c0100 0 0x100>;
 			interrupts = <GIC_SPI 113 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 701>;
-			phys = <&usb2_phy2>;
+			phys = <&usb2_phy2 2>;
 			phy-names = "usb";
 			companion = <&ohci2>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2492,7 +2506,7 @@ ehci3: usb@ee0e0100 {
 			reg = <0 0xee0e0100 0 0x100>;
 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
-			phys = <&usb2_phy3>;
+			phys = <&usb2_phy3 2>;
 			phy-names = "usb";
 			companion = <&ohci3>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
@@ -2508,7 +2522,7 @@ usb2_phy0: usb-phy@ee080200 {
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2519,7 +2533,7 @@ usb2_phy1: usb-phy@ee0a0200 {
 			clocks = <&cpg CPG_MOD 702>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2530,7 +2544,7 @@ usb2_phy2: usb-phy@ee0c0200 {
 			clocks = <&cpg CPG_MOD 701>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 701>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2542,7 +2556,7 @@ usb2_phy3: usb-phy@ee0e0200 {
 			clocks = <&cpg CPG_MOD 700>, <&cpg CPG_MOD 705>;
 			power-domains = <&sysc R8A7795_PD_ALWAYS_ON>;
 			resets = <&cpg 700>, <&cpg 705>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -3168,58 +3182,30 @@ sensor_thermal1: sensor-thermal1 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
+			sustainable-power = <6313>;
 
 			trips {
-				sensor1_passive: sensor1-passive {
-					temperature = <95000>;
-					hysteresis = <1000>;
-					type = "passive";
-				};
 				sensor1_crit: sensor1-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&sensor1_passive>;
-					cooling-device = <&a57_0 4 4>,
-							 <&a57_1 4 4>,
-							 <&a57_2 4 4>,
-							 <&a57_3 4 4>;
-				};
-			};
 		};
 
 		sensor_thermal2: sensor-thermal2 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
+			sustainable-power = <6313>;
 
 			trips {
-				sensor2_passive: sensor2-passive {
-					temperature = <95000>;
-					hysteresis = <1000>;
-					type = "passive";
-				};
 				sensor2_crit: sensor2-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&sensor2_passive>;
-					cooling-device = <&a57_0 4 4>,
-							 <&a57_1 4 4>,
-							 <&a57_2 4 4>,
-							 <&a57_3 4 4>;
-				};
-			};
 		};
 
 		sensor_thermal3: sensor-thermal3 {
@@ -3228,11 +3214,12 @@ sensor_thermal3: sensor-thermal3 {
 			thermal-sensors = <&tsc 2>;
 
 			trips {
-				sensor3_passive: sensor3-passive {
-					temperature = <95000>;
+				target: trip-point1 {
+					temperature = <100000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
+
 				sensor3_crit: sensor3-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
@@ -3242,11 +3229,15 @@ sensor3_crit: sensor3-crit {
 
 			cooling-maps {
 				map0 {
-					trip = <&sensor3_passive>;
-					cooling-device = <&a57_0 4 4>,
-							 <&a57_1 4 4>,
-							 <&a57_2 4 4>,
-							 <&a57_3 4 4>;
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
 				};
 			};
 		};

arch/arm64/boot/dts/renesas/r8a7796.dtsi

@@ -160,6 +160,7 @@ a57_0: cpu@0 {
 			power-domains = <&sysc R8A7796_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			dynamic-power-coefficient = <854>;
 			clocks = <&cpg CPG_CORE R8A7796_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 			capacity-dmips-mhz = <1024>;
@@ -186,6 +187,8 @@ a53_0: cpu@100 {
 			power-domains = <&sysc R8A7796_PD_CA53_CPU0>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <277>;
 			clocks = <&cpg CPG_CORE R8A7796_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
 			capacity-dmips-mhz = <535>;
@@ -783,7 +786,7 @@ hsusb: usb@e6590000 {
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 704>, <&cpg 703>;
@@ -1319,6 +1322,17 @@ scif5: serial@e6f30000 {
 			status = "disabled";
 		};
 
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a7796", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		msiof0: spi@e6e90000 {
 			compatible = "renesas,msiof-r8a7796",
 				     "renesas,rcar-gen3-msiof";
@@ -2275,7 +2289,7 @@ ohci0: usb@ee080000 {
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
@@ -2287,7 +2301,7 @@ ohci1: usb@ee0a0000 {
 			reg = <0 0xee0a0000 0 0x100>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>;
-			phys = <&usb2_phy1>;
+			phys = <&usb2_phy1 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
@@ -2299,7 +2313,7 @@ ehci0: usb@ee080100 {
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2312,7 +2326,7 @@ ehci1: usb@ee0a0100 {
 			reg = <0 0xee0a0100 0 0x100>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>;
-			phys = <&usb2_phy1>;
+			phys = <&usb2_phy1 2>;
 			phy-names = "usb";
 			companion = <&ohci1>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
@@ -2328,7 +2342,7 @@ usb2_phy0: usb-phy@ee080200 {
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2339,7 +2353,7 @@ usb2_phy1: usb-phy@ee0a0200 {
 			clocks = <&cpg CPG_MOD 702>;
 			power-domains = <&sysc R8A7796_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2814,76 +2828,61 @@ sensor_thermal1: sensor-thermal1 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
+			sustainable-power = <3874>;
 
 			trips {
-				sensor1_passive: sensor1-passive {
-					temperature = <95000>;
-					hysteresis = <1000>;
-					type = "passive";
-				};
 				sensor1_crit: sensor1-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&sensor1_passive>;
-					cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
-				};
-			};
 		};
 
 		sensor_thermal2: sensor-thermal2 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
+			sustainable-power = <3874>;
 
 			trips {
-				sensor2_passive: sensor2-passive {
-					temperature = <95000>;
-					hysteresis = <1000>;
-					type = "passive";
-				};
 				sensor2_crit: sensor2-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
-
-			cooling-maps {
-				map0 {
-					trip = <&sensor2_passive>;
-					cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
-				};
-			};
 		};
 
 		sensor_thermal3: sensor-thermal3 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
+			sustainable-power = <3874>;
 
 			trips {
-				sensor3_passive: sensor3-passive {
-					temperature = <95000>;
+				target: trip-point1 {
+					temperature = <100000>;
 					hysteresis = <1000>;
 					type = "passive";
 				};
+
 				sensor3_crit: sensor3-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
-
 			cooling-maps {
 				map0 {
-					trip = <&sensor3_passive>;
-					cooling-device = <&a57_0 5 5>, <&a57_1 5 5>;
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+				map1 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
 				};
 			};
 		};

arch/arm64/boot/dts/renesas/r8a77965.dtsi

@@ -111,6 +111,8 @@ a57_0: cpu@0 {
 			power-domains = <&sysc R8A77965_PD_CA57_CPU0>;
 			next-level-cache = <&L2_CA57>;
 			enable-method = "psci";
+			#cooling-cells = <2>;
+			dynamic-power-coefficient = <854>;
 			clocks = <&cpg CPG_CORE R8A77965_CLK_Z>;
 			operating-points-v2 = <&cluster0_opp>;
 		};
@@ -667,7 +669,7 @@ hsusb: usb@e6590000 {
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 704>, <&cpg 703>;
@@ -1195,6 +1197,17 @@ scif5: serial@e6f30000 {
 			status = "disabled";
 		};
 
+		tpu: pwm@e6e80000 {
+			compatible = "renesas,tpu-r8a77965", "renesas,tpu";
+			reg = <0 0xe6e80000 0 0x148>;
+			interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+			clocks = <&cpg CPG_MOD 304>;
+			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
+			resets = <&cpg 304>;
+			#pwm-cells = <3>;
+			status = "disabled";
+		};
+
 		msiof0: spi@e6e90000 {
 			compatible = "renesas,msiof-r8a77965",
 				     "renesas,rcar-gen3-msiof";
@@ -2015,7 +2028,7 @@ ohci0: usb@ee080000 {
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
@@ -2027,7 +2040,7 @@ ohci1: usb@ee0a0000 {
 			reg = <0 0xee0a0000 0 0x100>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>;
-			phys = <&usb2_phy1>;
+			phys = <&usb2_phy1 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
@@ -2039,7 +2052,7 @@ ehci0: usb@ee080100 {
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -2052,7 +2065,7 @@ ehci1: usb@ee0a0100 {
 			reg = <0 0xee0a0100 0 0x100>;
 			interrupts = <GIC_SPI 112 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 702>;
-			phys = <&usb2_phy1>;
+			phys = <&usb2_phy1 2>;
 			phy-names = "usb";
 			companion = <&ohci1>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
@@ -2068,7 +2081,7 @@ usb2_phy0: usb-phy@ee080200 {
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2079,7 +2092,7 @@ usb2_phy1: usb-phy@ee0a0200 {
 			clocks = <&cpg CPG_MOD 702>;
 			power-domains = <&sysc R8A77965_PD_ALWAYS_ON>;
 			resets = <&cpg 702>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -2519,6 +2532,7 @@ sensor_thermal1: sensor-thermal1 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 0>;
+			sustainable-power = <2439>;
 
 			trips {
 				sensor1_crit: sensor1-crit {
@@ -2533,6 +2547,7 @@ sensor_thermal2: sensor-thermal2 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 1>;
+			sustainable-power = <2439>;
 
 			trips {
 				sensor2_crit: sensor2-crit {
@@ -2547,14 +2562,30 @@ sensor_thermal3: sensor-thermal3 {
 			polling-delay-passive = <250>;
 			polling-delay = <1000>;
 			thermal-sensors = <&tsc 2>;
+			sustainable-power = <2439>;
 
 			trips {
+				target: trip-point1 {
+					/* miliCelsius  */
+					temperature = <100000>;
+					hysteresis = <1000>;
+					type = "passive";
+				};
+
 				sensor3_crit: sensor3-crit {
 					temperature = <120000>;
 					hysteresis = <1000>;
 					type = "critical";
 				};
 			};
+
+			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a57_0 2 4>;
+					contribution = <1024>;
+				};
+			};
 		};
 	};
 

arch/arm64/boot/dts/renesas/r8a77970-eagle.dts

@@ -19,7 +19,7 @@ aliases {
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};
 

arch/arm64/boot/dts/renesas/r8a77990-ebisu.dts

@@ -19,7 +19,7 @@ aliases {
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -262,7 +262,6 @@ &audio_clk_a {
 &avb {
 	pinctrl-0 = <&avb_pins>;
 	pinctrl-names = "default";
-	renesas,no-ether-link;
 	phy-handle = <&phy0>;
 	status = "okay";
 

arch/arm64/boot/dts/renesas/r8a77990.dtsi

@@ -84,9 +84,11 @@ a53_0: cpu@0 {
 			compatible = "arm,cortex-a53";
 			reg = <0>;
 			device_type = "cpu";
+			#cooling-cells = <2>;
 			power-domains = <&sysc R8A77990_PD_CA53_CPU0>;
 			next-level-cache = <&L2_CA53>;
 			enable-method = "psci";
+			dynamic-power-coefficient = <277>;
 			clocks =<&cpg CPG_CORE R8A77990_CLK_Z2>;
 			operating-points-v2 = <&cluster1_opp>;
 		};
@@ -630,7 +632,7 @@ hsusb: usb@e6590000 {
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 704>, <&cpg 703>;
@@ -1537,7 +1539,7 @@ ohci0: usb@ee080000 {
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
@@ -1549,7 +1551,7 @@ ehci0: usb@ee080100 {
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
@@ -1565,7 +1567,7 @@ usb2_phy0: usb-phy@ee080200 {
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A77990_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -1758,7 +1760,7 @@ csi40vin5: endpoint@1 {
 
 		du: display@feb00000 {
 			compatible = "renesas,du-r8a77990";
-			reg = <0 0xfeb00000 0 0x80000>;
+			reg = <0 0xfeb00000 0 0x40000>;
 			interrupts = <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>,
 				     <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 724>,
@@ -1801,6 +1803,8 @@ lvds0: lvds-encoder@feb90000 {
 			resets = <&cpg 727>;
 			status = "disabled";
 
+			renesas,companion = <&lvds1>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;
@@ -1856,11 +1860,18 @@ prr: chipid@fff00044 {
 	thermal-zones {
 		cpu-thermal {
 			polling-delay-passive = <250>;
-			polling-delay = <1000>;
-			thermal-sensors = <&thermal>;
+			polling-delay = <0>;
+			thermal-sensors = <&thermal 0>;
+			sustainable-power = <717>;
 
 			trips {
-				cpu-crit {
+				target: trip-point1 {
+					temperature = <100000>;
+					hysteresis = <2000>;
+					type = "passive";
+				};
+
+				sensor1_crit: sensor1-crit {
 					temperature = <120000>;
 					hysteresis = <2000>;
 					type = "critical";
@@ -1868,6 +1879,11 @@ cpu-crit {
 			};
 
 			cooling-maps {
+				map0 {
+					trip = <&target>;
+					cooling-device = <&a53_0 0 2>;
+					contribution = <1024>;
+				};
 			};
 		};
 	};

arch/arm64/boot/dts/renesas/r8a77995-draak.dts

@@ -20,7 +20,7 @@ aliases {
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};
 
@@ -511,12 +511,7 @@ &vin4 {
 	status = "okay";
 
 	ports {
-		#address-cells = <1>;
-		#size-cells = <0>;
-
-		port@0 {
-			reg = <0>;
-
+		port {
 			vin4_in: endpoint {
 				remote-endpoint = <&adv7180_out>;
 			};

arch/arm64/boot/dts/renesas/r8a77995.dtsi

@@ -354,7 +354,7 @@ hsusb: usb@e6590000 {
 			       <&usb_dmac1 0>, <&usb_dmac1 1>;
 			dma-names = "ch0", "ch1", "ch2", "ch3";
 			renesas,buswait = <11>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 3>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			resets = <&cpg 704>, <&cpg 703>;
@@ -875,7 +875,7 @@ ohci0: usb@ee080000 {
 			reg = <0 0xee080000 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 1>;
 			phy-names = "usb";
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
@@ -887,7 +887,7 @@ ehci0: usb@ee080100 {
 			reg = <0 0xee080100 0 0x100>;
 			interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
-			phys = <&usb2_phy0>;
+			phys = <&usb2_phy0 2>;
 			phy-names = "usb";
 			companion = <&ohci0>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
@@ -903,7 +903,7 @@ usb2_phy0: usb-phy@ee080200 {
 			clocks = <&cpg CPG_MOD 703>, <&cpg CPG_MOD 704>;
 			power-domains = <&sysc R8A77995_PD_ALWAYS_ON>;
 			resets = <&cpg 703>, <&cpg 704>;
-			#phy-cells = <0>;
+			#phy-cells = <1>;
 			status = "disabled";
 		};
 
@@ -1038,6 +1038,8 @@ lvds0: lvds-encoder@feb90000 {
 			resets = <&cpg 727>;
 			status = "disabled";
 
+			renesas,companion = <&lvds1>;
+
 			ports {
 				#address-cells = <1>;
 				#size-cells = <0>;

arch/arm64/boot/dts/renesas/salvator-common.dtsi

@@ -39,7 +39,7 @@ aliases {
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};
 

arch/arm64/boot/dts/renesas/ulcb-kf.dtsi

@@ -38,6 +38,18 @@ snd_vcc5v: regulator-snd_vcc5v {
 		regulator-min-microvolt = <5000000>;
 		regulator-max-microvolt = <5000000>;
 	};
+
+	wlan_en: regulator-wlan_en {
+		compatible = "regulator-fixed";
+		regulator-name = "wlan-en-regulator";
+
+		regulator-min-microvolt = <3300000>;
+		regulator-max-microvolt = <3300000>;
+
+		gpio = <&gpio_exp_74 4 GPIO_ACTIVE_HIGH>;
+		startup-delay-us = <70000>;
+		enable-active-high;
+	};
 };
 
 &can0 {
@@ -88,6 +100,13 @@ audio_out_off {
 			line-name = "Audio_Out_OFF";
 		};
 
+		sd-wifi-mux {
+			gpio-hog;
+			gpios = <5 GPIO_ACTIVE_HIGH>;
+			output-low;	/* Connect WL1837 */
+			line-name = "SD WiFi mux";
+		};
+
 		hub_pwen {
 			gpio-hog;
 			gpios = <6 GPIO_ACTIVE_HIGH>;
@@ -254,6 +273,12 @@ scif1_pins: scif1 {
 		function = "scif1";
 	};
 
+	sdhi3_pins: sdhi3 {
+		groups = "sdhi3_data4", "sdhi3_ctrl";
+		function = "sdhi3";
+		power-source = <3300>;
+	};
+
 	usb0_pins: usb0 {
 		groups = "usb0";
 		function = "usb0";
@@ -273,6 +298,30 @@ &scif1 {
 	status = "okay";
 };
 
+&sdhi3 {
+	pinctrl-0 = <&sdhi3_pins>;
+	pinctrl-names = "default";
+
+	vmmc-supply = <&wlan_en>;
+	vqmmc-supply = <&wlan_en>;
+	bus-width = <4>;
+	no-1-8-v;
+	non-removable;
+	cap-power-off-card;
+	keep-power-in-suspend;
+	max-frequency = <26000000>;
+	status = "okay";
+
+	#address-cells = <1>;
+	#size-cells = <0>;
+	wlcore: wlcore@2 {
+		compatible = "ti,wl1837";
+		reg = <2>;
+		interrupt-parent = <&gpio1>;
+		interrupts = <25 IRQ_TYPE_EDGE_FALLING>;
+	};
+};
+
 &usb2_phy0 {
 	pinctrl-0 = <&usb0_pins>;
 	pinctrl-names = "default";

arch/arm64/boot/dts/renesas/ulcb.dtsi

@@ -26,7 +26,7 @@ aliases {
 	};
 
 	chosen {
-		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
+		bootargs = "ignore_loglevel rw root=/dev/nfs ip=on";
 		stdout-path = "serial0:115200n8";
 	};