Commit d767af5e authored by Maxime Ripard's avatar Maxime Ripard Committed by Olof Johansson

ARM: sunxi: Reintroduce the restart code for A10/A20 SoCs

This partly reverts commits 55360050 (ARM: sunxi: Remove reset code from
the platform) and 5e669ec5 (ARM: sunxi: Remove init_machine callback) for
the sun4i, sun5i and sun7i families.

This is needed because the watchdog counterpart of these commits was dropped,
and didn't make it into 3.16. In order to still be able to reboot the board, we
need to reintroduce that code. Of course, the long term view is still to get
rid of that code in mach-sunxi.
Signed-off-by: default avatarMaxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: default avatarOlof Johansson <olof@lixom.net>
parent 5acd78c5
...@@ -12,8 +12,81 @@ ...@@ -12,8 +12,81 @@
#include <linux/clk-provider.h> #include <linux/clk-provider.h>
#include <linux/clocksource.h> #include <linux/clocksource.h>
#include <linux/delay.h>
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/of_address.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/io.h>
#include <linux/reboot.h>
#include <asm/mach/arch.h> #include <asm/mach/arch.h>
#include <asm/mach/map.h>
#include <asm/system_misc.h>
#define SUN4I_WATCHDOG_CTRL_REG 0x00
#define SUN4I_WATCHDOG_CTRL_RESTART BIT(0)
#define SUN4I_WATCHDOG_MODE_REG 0x04
#define SUN4I_WATCHDOG_MODE_ENABLE BIT(0)
#define SUN4I_WATCHDOG_MODE_RESET_ENABLE BIT(1)
#define SUN6I_WATCHDOG1_IRQ_REG 0x00
#define SUN6I_WATCHDOG1_CTRL_REG 0x10
#define SUN6I_WATCHDOG1_CTRL_RESTART BIT(0)
#define SUN6I_WATCHDOG1_CONFIG_REG 0x14
#define SUN6I_WATCHDOG1_CONFIG_RESTART BIT(0)
#define SUN6I_WATCHDOG1_CONFIG_IRQ BIT(1)
#define SUN6I_WATCHDOG1_MODE_REG 0x18
#define SUN6I_WATCHDOG1_MODE_ENABLE BIT(0)
static void __iomem *wdt_base;
static void sun4i_restart(enum reboot_mode mode, const char *cmd)
{
if (!wdt_base)
return;
/* Enable timer and set reset bit in the watchdog */
writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
wdt_base + SUN4I_WATCHDOG_MODE_REG);
/*
* Restart the watchdog. The default (and lowest) interval
* value for the watchdog is 0.5s.
*/
writel(SUN4I_WATCHDOG_CTRL_RESTART, wdt_base + SUN4I_WATCHDOG_CTRL_REG);
while (1) {
mdelay(5);
writel(SUN4I_WATCHDOG_MODE_ENABLE | SUN4I_WATCHDOG_MODE_RESET_ENABLE,
wdt_base + SUN4I_WATCHDOG_MODE_REG);
}
}
static struct of_device_id sunxi_restart_ids[] = {
{ .compatible = "allwinner,sun4i-a10-wdt" },
{ /*sentinel*/ }
};
static void sunxi_setup_restart(void)
{
struct device_node *np;
np = of_find_matching_node(NULL, sunxi_restart_ids);
if (WARN(!np, "unable to setup watchdog restart"))
return;
wdt_base = of_iomap(np, 0);
WARN(!wdt_base, "failed to map watchdog base address");
}
static void __init sunxi_dt_init(void)
{
sunxi_setup_restart();
of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
}
static const char * const sunxi_board_dt_compat[] = { static const char * const sunxi_board_dt_compat[] = {
"allwinner,sun4i-a10", "allwinner,sun4i-a10",
...@@ -23,7 +96,9 @@ static const char * const sunxi_board_dt_compat[] = { ...@@ -23,7 +96,9 @@ static const char * const sunxi_board_dt_compat[] = {
}; };
DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)") DT_MACHINE_START(SUNXI_DT, "Allwinner A1X (Device Tree)")
.init_machine = sunxi_dt_init,
.dt_compat = sunxi_board_dt_compat, .dt_compat = sunxi_board_dt_compat,
.restart = sun4i_restart,
MACHINE_END MACHINE_END
static const char * const sun6i_board_dt_compat[] = { static const char * const sun6i_board_dt_compat[] = {
...@@ -51,5 +126,7 @@ static const char * const sun7i_board_dt_compat[] = { ...@@ -51,5 +126,7 @@ static const char * const sun7i_board_dt_compat[] = {
}; };
DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family") DT_MACHINE_START(SUN7I_DT, "Allwinner sun7i (A20) Family")
.init_machine = sunxi_dt_init,
.dt_compat = sun7i_board_dt_compat, .dt_compat = sun7i_board_dt_compat,
.restart = sun4i_restart,
MACHINE_END MACHINE_END
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment