Commit d7ed89d5 authored by Song Hongyan's avatar Song Hongyan Committed by Jonathan Cameron

iio: hid: Add humidity sensor support

Environmental humidity sensor is a hid defined sensor,
it shows raw humidity measurement of air.

More information can be found in:
http://www.usb.org/developers/hidpage/HUTRR39b.pdf

According to IIO ABI definition, humidityrelative data output unit is
milli percent. Add the unit convert from percent to milli percent.
Signed-off-by: default avatarSong Hongyan <hongyan.song@intel.com>
Signed-off-by: default avatarJonathan Cameron <jic23@kernel.org>
parent e0ad9b73
......@@ -71,6 +71,8 @@ static struct {
{HID_USAGE_SENSOR_TEMPERATURE, 0, 1000, 0},
{HID_USAGE_SENSOR_TEMPERATURE, HID_USAGE_SENSOR_UNITS_DEGREES, 1000, 0},
{HID_USAGE_SENSOR_HUMIDITY, 0, 1000, 0},
};
static int pow_10(unsigned power)
......
......@@ -36,6 +36,20 @@ config HDC100X
To compile this driver as a module, choose M here: the module
will be called hdc100x.
config HID_SENSOR_HUMIDITY
tristate "HID Environmental humidity sensor"
depends on HID_SENSOR_HUB
select IIO_BUFFER
select IIO_TRIGGERED_BUFFER
select HID_SENSOR_IIO_COMMON
select HID_SENSOR_IIO_TRIGGER
help
Say yes here to build support for the HID SENSOR
humidity driver
To compile this driver as a module, choose M here: the module
will be called hid-sensor-humidity.
config HTS221
tristate "STMicroelectronics HTS221 sensor Driver"
depends on (I2C || SPI)
......
......@@ -5,6 +5,7 @@
obj-$(CONFIG_AM2315) += am2315.o
obj-$(CONFIG_DHT11) += dht11.o
obj-$(CONFIG_HDC100X) += hdc100x.o
obj-$(CONFIG_HID_SENSOR_HUMIDITY) += hid-sensor-humidity.o
hts221-y := hts221_core.o \
hts221_buffer.o
......@@ -15,3 +16,5 @@ obj-$(CONFIG_HTS221_SPI) += hts221_spi.o
obj-$(CONFIG_HTU21) += htu21.o
obj-$(CONFIG_SI7005) += si7005.o
obj-$(CONFIG_SI7020) += si7020.o
ccflags-y += -I$(srctree)/drivers/iio/common/hid-sensors
/*
* HID Sensors Driver
* Copyright (c) 2017, Intel Corporation.
*
* This program is free software; you can redistribute it and/or modify it
* under the terms and conditions of the GNU General Public License,
* version 2, as published by the Free Software Foundation.
*
* This program is distributed in the hope it will be useful, but WITHOUT
* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
* more details.
*
* You should have received a copy of the GNU General Public License along with
* this program.
*/
#include <linux/device.h>
#include <linux/hid-sensor-hub.h>
#include <linux/iio/buffer.h>
#include <linux/iio/iio.h>
#include <linux/iio/triggered_buffer.h>
#include <linux/iio/trigger_consumer.h>
#include <linux/module.h>
#include <linux/platform_device.h>
#include "hid-sensor-trigger.h"
struct hid_humidity_state {
struct hid_sensor_common common_attributes;
struct hid_sensor_hub_attribute_info humidity_attr;
s32 humidity_data;
int scale_pre_decml;
int scale_post_decml;
int scale_precision;
int value_offset;
};
/* Channel definitions */
static const struct iio_chan_spec humidity_channels[] = {
{
.type = IIO_HUMIDITYRELATIVE,
.info_mask_separate = BIT(IIO_CHAN_INFO_RAW),
.info_mask_shared_by_type = BIT(IIO_CHAN_INFO_OFFSET) |
BIT(IIO_CHAN_INFO_SCALE) |
BIT(IIO_CHAN_INFO_SAMP_FREQ) |
BIT(IIO_CHAN_INFO_HYSTERESIS),
},
IIO_CHAN_SOFT_TIMESTAMP(1)
};
/* Adjust channel real bits based on report descriptor */
static void humidity_adjust_channel_bit_mask(struct iio_chan_spec *channels,
int channel, int size)
{
channels[channel].scan_type.sign = 's';
/* Real storage bits will change based on the report desc. */
channels[channel].scan_type.realbits = size * 8;
/* Maximum size of a sample to capture is s32 */
channels[channel].scan_type.storagebits = sizeof(s32) * 8;
}
static int humidity_read_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int *val, int *val2, long mask)
{
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_RAW:
if (chan->type != IIO_HUMIDITYRELATIVE)
return -EINVAL;
hid_sensor_power_state(&humid_st->common_attributes, true);
*val = sensor_hub_input_attr_get_raw_value(
humid_st->common_attributes.hsdev,
HID_USAGE_SENSOR_HUMIDITY,
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
humid_st->humidity_attr.report_id,
SENSOR_HUB_SYNC);
hid_sensor_power_state(&humid_st->common_attributes, false);
return IIO_VAL_INT;
case IIO_CHAN_INFO_SCALE:
*val = humid_st->scale_pre_decml;
*val2 = humid_st->scale_post_decml;
return humid_st->scale_precision;
case IIO_CHAN_INFO_OFFSET:
*val = humid_st->value_offset;
return IIO_VAL_INT;
case IIO_CHAN_INFO_SAMP_FREQ:
return hid_sensor_read_samp_freq_value(
&humid_st->common_attributes, val, val2);
case IIO_CHAN_INFO_HYSTERESIS:
return hid_sensor_read_raw_hyst_value(
&humid_st->common_attributes, val, val2);
default:
return -EINVAL;
}
}
static int humidity_write_raw(struct iio_dev *indio_dev,
struct iio_chan_spec const *chan,
int val, int val2, long mask)
{
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
switch (mask) {
case IIO_CHAN_INFO_SAMP_FREQ:
return hid_sensor_write_samp_freq_value(
&humid_st->common_attributes, val, val2);
case IIO_CHAN_INFO_HYSTERESIS:
return hid_sensor_write_raw_hyst_value(
&humid_st->common_attributes, val, val2);
default:
return -EINVAL;
}
}
static const struct iio_info humidity_info = {
.driver_module = THIS_MODULE,
.read_raw = &humidity_read_raw,
.write_raw = &humidity_write_raw,
};
/* Callback handler to send event after all samples are received and captured */
static int humidity_proc_event(struct hid_sensor_hub_device *hsdev,
unsigned int usage_id, void *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
if (atomic_read(&humid_st->common_attributes.data_ready))
iio_push_to_buffers_with_timestamp(indio_dev,
&humid_st->humidity_data,
iio_get_time_ns(indio_dev));
return 0;
}
/* Capture samples in local storage */
static int humidity_capture_sample(struct hid_sensor_hub_device *hsdev,
unsigned int usage_id, size_t raw_len,
char *raw_data, void *pdev)
{
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
switch (usage_id) {
case HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY:
humid_st->humidity_data = *(s32 *)raw_data;
return 0;
default:
return -EINVAL;
}
}
/* Parse report which is specific to an usage id */
static int humidity_parse_report(struct platform_device *pdev,
struct hid_sensor_hub_device *hsdev,
struct iio_chan_spec *channels,
unsigned int usage_id,
struct hid_humidity_state *st)
{
int ret;
ret = sensor_hub_input_get_attribute_info(hsdev, HID_INPUT_REPORT,
usage_id,
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
&st->humidity_attr);
if (ret < 0)
return ret;
humidity_adjust_channel_bit_mask(channels, 0, st->humidity_attr.size);
st->scale_precision = hid_sensor_format_scale(
HID_USAGE_SENSOR_HUMIDITY,
&st->humidity_attr,
&st->scale_pre_decml,
&st->scale_post_decml);
/* Set Sensitivity field ids, when there is no individual modifier */
if (st->common_attributes.sensitivity.index < 0)
sensor_hub_input_get_attribute_info(hsdev,
HID_FEATURE_REPORT, usage_id,
HID_USAGE_SENSOR_DATA_MOD_CHANGE_SENSITIVITY_ABS |
HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY,
&st->common_attributes.sensitivity);
return ret;
}
static struct hid_sensor_hub_callbacks humidity_callbacks = {
.send_event = &humidity_proc_event,
.capture_sample = &humidity_capture_sample,
};
/* Function to initialize the processing for usage id */
static int hid_humidity_probe(struct platform_device *pdev)
{
static const char *name = "humidity";
struct iio_dev *indio_dev;
struct hid_humidity_state *humid_st;
struct iio_chan_spec *humid_chans;
struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
int ret;
indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*humid_st));
if (!indio_dev)
return -ENOMEM;
humid_st = iio_priv(indio_dev);
humid_st->common_attributes.hsdev = hsdev;
humid_st->common_attributes.pdev = pdev;
ret = hid_sensor_parse_common_attributes(hsdev,
HID_USAGE_SENSOR_HUMIDITY,
&humid_st->common_attributes);
if (ret)
return ret;
humid_chans = devm_kmemdup(&indio_dev->dev, humidity_channels,
sizeof(humidity_channels), GFP_KERNEL);
if (!humid_chans)
return -ENOMEM;
ret = humidity_parse_report(pdev, hsdev, humid_chans,
HID_USAGE_SENSOR_HUMIDITY, humid_st);
if (ret)
return ret;
indio_dev->channels = humid_chans;
indio_dev->num_channels = ARRAY_SIZE(humidity_channels);
indio_dev->dev.parent = &pdev->dev;
indio_dev->info = &humidity_info;
indio_dev->name = name;
indio_dev->modes = INDIO_DIRECT_MODE;
ret = devm_iio_triggered_buffer_setup(&pdev->dev, indio_dev,
&iio_pollfunc_store_time, NULL, NULL);
if (ret)
return ret;
atomic_set(&humid_st->common_attributes.data_ready, 0);
ret = hid_sensor_setup_trigger(indio_dev, name,
&humid_st->common_attributes);
if (ret)
return ret;
platform_set_drvdata(pdev, indio_dev);
humidity_callbacks.pdev = pdev;
ret = sensor_hub_register_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY,
&humidity_callbacks);
if (ret)
goto error_remove_trigger;
ret = iio_device_register(indio_dev);
if (ret)
goto error_remove_callback;
return ret;
error_remove_callback:
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
error_remove_trigger:
hid_sensor_remove_trigger(&humid_st->common_attributes);
return ret;
}
/* Function to deinitialize the processing for usage id */
static int hid_humidity_remove(struct platform_device *pdev)
{
struct hid_sensor_hub_device *hsdev = dev_get_platdata(&pdev->dev);
struct iio_dev *indio_dev = platform_get_drvdata(pdev);
struct hid_humidity_state *humid_st = iio_priv(indio_dev);
iio_device_unregister(indio_dev);
sensor_hub_remove_callback(hsdev, HID_USAGE_SENSOR_HUMIDITY);
hid_sensor_remove_trigger(&humid_st->common_attributes);
return 0;
}
static const struct platform_device_id hid_humidity_ids[] = {
{
/* Format: HID-SENSOR-usage_id_in_hex_lowercase */
.name = "HID-SENSOR-200032",
},
{ /* sentinel */ }
};
MODULE_DEVICE_TABLE(platform, hid_humidity_ids);
static struct platform_driver hid_humidity_platform_driver = {
.id_table = hid_humidity_ids,
.driver = {
.name = KBUILD_MODNAME,
.pm = &hid_sensor_pm_ops,
},
.probe = hid_humidity_probe,
.remove = hid_humidity_remove,
};
module_platform_driver(hid_humidity_platform_driver);
MODULE_DESCRIPTION("HID Environmental humidity sensor");
MODULE_AUTHOR("Song Hongyan <hongyan.song@intel.com>");
MODULE_LICENSE("GPL v2");
......@@ -49,6 +49,10 @@
#define HID_USAGE_SENSOR_TEMPERATURE 0x200033
#define HID_USAGE_SENSOR_DATA_ENVIRONMENTAL_TEMPERATURE 0x200434
/* humidity */
#define HID_USAGE_SENSOR_HUMIDITY 0x200032
#define HID_USAGE_SENSOR_ATMOSPHERIC_HUMIDITY 0x200433
/* Gyro 3D: (200076) */
#define HID_USAGE_SENSOR_GYRO_3D 0x200076
#define HID_USAGE_SENSOR_DATA_ANGL_VELOCITY 0x200456
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment