Commit d8a00916 authored by Carlo Caione's avatar Carlo Caione Committed by Arnd Bergmann

ARM: meson: debug: add debug UART for earlyprintk support

Add the UART definitions needed to support earlyprintk for MesonX SoCs
on UARTAO.
Signed-off-by: default avatarCarlo Caione <carlo@caione.org>
Signed-off-by: default avatarArnd Bergmann <arnd@arndb.de>
parent 4fdea267
......@@ -356,6 +356,13 @@ choice
Say Y here if you want the debug print routines to direct
their output to UART1 serial port on KEYSTONE2 devices.
config DEBUG_MESON_UARTAO
bool "Kernel low-level debugging via Meson6 UARTAO"
depends on ARCH_MESON
help
Say Y here if you want kernel low-lever debugging support
on Amlogic Meson6 based platforms on the UARTAO.
config DEBUG_MMP_UART2
bool "Kernel low-level debugging message via MMP UART2"
depends on ARCH_MMP
......@@ -1027,6 +1034,7 @@ config DEBUG_LL_INCLUDE
string
default "debug/8250.S" if DEBUG_LL_UART_8250 || DEBUG_UART_8250
default "debug/clps711x.S" if DEBUG_CLPS711X_UART1 || DEBUG_CLPS711X_UART2
default "debug/meson.S" if DEBUG_MESON_UARTAO
default "debug/pl01x.S" if DEBUG_LL_UART_PL01X || DEBUG_UART_PL01X
default "debug/exynos.S" if DEBUG_EXYNOS_UART
default "debug/efm32.S" if DEBUG_LL_UART_EFM32
......@@ -1123,6 +1131,7 @@ config DEBUG_UART_PHYS
default 0xc8000003 if ARCH_IXP4XX && CPU_BIG_ENDIAN
default 0xd0000000 if ARCH_SPEAR3XX || ARCH_SPEAR6XX
default 0xd0012000 if DEBUG_MVEBU_UART
default 0xc81004c0 if DEBUG_MESON_UARTAO
default 0xd4017000 if DEBUG_MMP_UART2
default 0xd4018000 if DEBUG_MMP_UART3
default 0xe0000000 if ARCH_SPEAR13XX
......@@ -1143,7 +1152,7 @@ config DEBUG_UART_PHYS
default 0xfffff700 if ARCH_IOP33X
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_LL_UART_EFM32 || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_VIRT
......@@ -1182,6 +1191,7 @@ config DEBUG_UART_VIRT
default 0xfd012000 if ARCH_MV78XX0
default 0xfde12000 if ARCH_DOVE
default 0xfe012000 if ARCH_ORION5X
default 0xf31004c0 if DEBUG_MESON_UARTAO
default 0xfe017000 if DEBUG_MMP_UART2
default 0xfe018000 if DEBUG_MMP_UART3
default 0xfe100000 if DEBUG_IMX23_UART || DEBUG_IMX28_UART
......@@ -1213,7 +1223,7 @@ config DEBUG_UART_VIRT
default 0xff003000 if DEBUG_U300_UART
default DEBUG_UART_PHYS if !MMU
depends on DEBUG_LL_UART_8250 || DEBUG_LL_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || \
DEBUG_UART_8250 || DEBUG_UART_PL01X || DEBUG_MESON_UARTAO || \
DEBUG_MSM_UART || DEBUG_QCOM_UARTDM || DEBUG_S3C24XX_UART
config DEBUG_UART_8250_SHIFT
......
/*
* Copyright (C) 2014 Carlo Caione
* Carlo Caione <carlo@caione.org>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#define MESON_AO_UART_WFIFO 0x0
#define MESON_AO_UART_STATUS 0xc
#define MESON_AO_UART_TX_FIFO_EMPTY (1 << 22)
#define MESON_AO_UART_TX_FIFO_FULL (1 << 21)
.macro addruart, rp, rv, tmp
ldr \rp, =(CONFIG_DEBUG_UART_PHYS) @ physical
ldr \rv, =(CONFIG_DEBUG_UART_VIRT) @ virtual
.endm
.macro senduart,rd,rx
str \rd, [\rx, #MESON_AO_UART_WFIFO]
.endm
.macro busyuart,rd,rx
1002: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
tst \rd, #MESON_AO_UART_TX_FIFO_EMPTY
beq 1002b
.endm
.macro waituart,rd,rx
1001: ldr \rd, [\rx, #MESON_AO_UART_STATUS]
tst \rd, #MESON_AO_UART_TX_FIFO_FULL
bne 1001b
.endm
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment