Commit d910fc78 authored by Linus Torvalds's avatar Linus Torvalds

Merge branch 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-backlight:
  backlight: new driver for ADP5520/ADP5501 MFD PMICs
  backlight: extend event support to also support poll()
  backlight/eeepc-laptop: Update the backlight state when we change brightness
  backlight/acpi: Update the backlight state when we change brightness
  backlight: Allow drivers to update the core, and generate events on changes
  backlight: switch to da903x driver to dev_pm_ops
  backlight: Add support for the Avionic Design Xanthos backlight device.
  backlight: spi driver for LMS283GF05 LCD
  backlight: move hp680-bl's probe function to .devinit.text
  backlight: Add support for new Apple machines.
  backlight: mbp_nvidia_bl: add support for MacBookAir 1,1
  backlight: Add WM831x backlight driver

Trivial conflicts due to '#ifdef CONFIG_PM' differences in
drivers/video/backlight/da903x_bl.c
parents 1d1764c3 a7998cec
...@@ -1986,6 +1986,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event) ...@@ -1986,6 +1986,10 @@ acpi_video_switch_brightness(struct acpi_video_device *device, int event)
result = acpi_video_device_lcd_set_level(device, level_next); result = acpi_video_device_lcd_set_level(device, level_next);
if (!result)
backlight_force_update(device->backlight,
BACKLIGHT_UPDATE_HOTKEY);
out: out:
if (result) if (result)
printk(KERN_ERR PREFIX "Failed to switch the brightness\n"); printk(KERN_ERR PREFIX "Failed to switch the brightness\n");
......
...@@ -624,7 +624,7 @@ static int notify_brn(void) ...@@ -624,7 +624,7 @@ static int notify_brn(void)
struct backlight_device *bd = eeepc_backlight_device; struct backlight_device *bd = eeepc_backlight_device;
if (bd) { if (bd) {
int old = bd->props.brightness; int old = bd->props.brightness;
bd->props.brightness = read_brightness(bd); backlight_force_update(bd, BACKLIGHT_UPDATE_HOTKEY);
return old; return old;
} }
return -1; return -1;
......
...@@ -31,6 +31,13 @@ config LCD_CORGI ...@@ -31,6 +31,13 @@ config LCD_CORGI
Say y here to support the LCD panels usually found on SHARP Say y here to support the LCD panels usually found on SHARP
corgi (C7x0) and spitz (Cxx00) models. corgi (C7x0) and spitz (Cxx00) models.
config LCD_LMS283GF05
tristate "Samsung LMS283GF05 LCD"
depends on LCD_CLASS_DEVICE && SPI_MASTER && GENERIC_GPIO
help
SPI driver for Samsung LMS283GF05. This provides basic support
for powering the LCD up/down through a sysfs interface.
config LCD_LTV350QV config LCD_LTV350QV
tristate "Samsung LTV350QV LCD Panel" tristate "Samsung LTV350QV LCD Panel"
depends on LCD_CLASS_DEVICE && SPI_MASTER depends on LCD_CLASS_DEVICE && SPI_MASTER
...@@ -229,3 +236,29 @@ config BACKLIGHT_SAHARA ...@@ -229,3 +236,29 @@ config BACKLIGHT_SAHARA
help help
If you have a Tabletkiosk Sahara Touch-iT, say y to enable the If you have a Tabletkiosk Sahara Touch-iT, say y to enable the
backlight driver. backlight driver.
config BACKLIGHT_WM831X
tristate "WM831x PMIC Backlight Driver"
depends on BACKLIGHT_CLASS_DEVICE && MFD_WM831X
help
If you have a backlight driven by the ISINK and DCDC of a
WM831x PMIC say y to enable the backlight driver for it.
config BACKLIGHT_ADX
tristate "Avionic Design Xanthos Backlight Driver"
depends on BACKLIGHT_CLASS_DEVICE && ARCH_PXA_ADX
default y
help
Say Y to enable the backlight driver on Avionic Design Xanthos-based
boards.
config BACKLIGHT_ADP5520
tristate "Backlight Driver for ADP5520/ADP5501 using WLED"
depends on BACKLIGHT_CLASS_DEVICE && PMIC_ADP5520
help
If you have a LCD backlight connected to the BST/BL_SNK output of
ADP5520 or ADP5501, say Y here to enable this driver.
To compile this driver as a module, choose M here: the module will
be called adp5520_bl.
...@@ -3,6 +3,7 @@ ...@@ -3,6 +3,7 @@
obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o obj-$(CONFIG_LCD_CLASS_DEVICE) += lcd.o
obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o obj-$(CONFIG_LCD_CORGI) += corgi_lcd.o
obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o obj-$(CONFIG_LCD_HP700) += jornada720_lcd.o
obj-$(CONFIG_LCD_LMS283GF05) += lms283gf05.o
obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o obj-$(CONFIG_LCD_LTV350QV) += ltv350qv.o
obj-$(CONFIG_LCD_ILI9320) += ili9320.o obj-$(CONFIG_LCD_ILI9320) += ili9320.o
obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
...@@ -24,4 +25,7 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o ...@@ -24,4 +25,7 @@ obj-$(CONFIG_BACKLIGHT_DA903X) += da903x_bl.o
obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o obj-$(CONFIG_BACKLIGHT_MBP_NVIDIA) += mbp_nvidia_bl.o
obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o obj-$(CONFIG_BACKLIGHT_TOSA) += tosa_bl.o
obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
This diff is collapsed.
/*
* linux/drivers/video/backlight/adx.c
*
* Copyright (C) 2009 Avionic Design GmbH
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* Written by Thierry Reding <thierry.reding@avionic-design.de>
*/
#include <linux/backlight.h>
#include <linux/fb.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/platform_device.h>
/* register definitions */
#define ADX_BACKLIGHT_CONTROL 0x00
#define ADX_BACKLIGHT_CONTROL_ENABLE (1 << 0)
#define ADX_BACKLIGHT_BRIGHTNESS 0x08
#define ADX_BACKLIGHT_STATUS 0x10
#define ADX_BACKLIGHT_ERROR 0x18
struct adxbl {
void __iomem *base;
};
static int adx_backlight_update_status(struct backlight_device *bldev)
{
struct adxbl *bl = bl_get_data(bldev);
u32 value;
value = bldev->props.brightness;
writel(value, bl->base + ADX_BACKLIGHT_BRIGHTNESS);
value = readl(bl->base + ADX_BACKLIGHT_CONTROL);
if (bldev->props.state & BL_CORE_FBBLANK)
value &= ~ADX_BACKLIGHT_CONTROL_ENABLE;
else
value |= ADX_BACKLIGHT_CONTROL_ENABLE;
writel(value, bl->base + ADX_BACKLIGHT_CONTROL);
return 0;
}
static int adx_backlight_get_brightness(struct backlight_device *bldev)
{
struct adxbl *bl = bl_get_data(bldev);
u32 brightness;
brightness = readl(bl->base + ADX_BACKLIGHT_BRIGHTNESS);
return brightness & 0xff;
}
static int adx_backlight_check_fb(struct fb_info *fb)
{
return 1;
}
static struct backlight_ops adx_backlight_ops = {
.options = 0,
.update_status = adx_backlight_update_status,
.get_brightness = adx_backlight_get_brightness,
.check_fb = adx_backlight_check_fb,
};
static int __devinit adx_backlight_probe(struct platform_device *pdev)
{
struct backlight_device *bldev;
struct resource *res;
struct adxbl *bl;
int ret = 0;
res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res) {
ret = -ENXIO;
goto out;
}
res = devm_request_mem_region(&pdev->dev, res->start,
resource_size(res), res->name);
if (!res) {
ret = -ENXIO;
goto out;
}
bl = devm_kzalloc(&pdev->dev, sizeof(*bl), GFP_KERNEL);
if (!bl) {
ret = -ENOMEM;
goto out;
}
bl->base = devm_ioremap_nocache(&pdev->dev, res->start,
resource_size(res));
if (!bl->base) {
ret = -ENXIO;
goto out;
}
bldev = backlight_device_register(dev_name(&pdev->dev), &pdev->dev, bl,
&adx_backlight_ops);
if (!bldev) {
ret = -ENOMEM;
goto out;
}
bldev->props.max_brightness = 0xff;
bldev->props.brightness = 0xff;
bldev->props.power = FB_BLANK_UNBLANK;
platform_set_drvdata(pdev, bldev);
out:
return ret;
}
static int __devexit adx_backlight_remove(struct platform_device *pdev)
{
struct backlight_device *bldev;
int ret = 0;
bldev = platform_get_drvdata(pdev);
bldev->props.power = FB_BLANK_UNBLANK;
bldev->props.brightness = 0xff;
backlight_update_status(bldev);
backlight_device_unregister(bldev);
platform_set_drvdata(pdev, NULL);
return ret;
}
#ifdef CONFIG_PM
static int adx_backlight_suspend(struct platform_device *pdev,
pm_message_t state)
{
return 0;
}
static int adx_backlight_resume(struct platform_device *pdev)
{
return 0;
}
#else
#define adx_backlight_suspend NULL
#define adx_backlight_resume NULL
#endif
static struct platform_driver adx_backlight_driver = {
.probe = adx_backlight_probe,
.remove = __devexit_p(adx_backlight_remove),
.suspend = adx_backlight_suspend,
.resume = adx_backlight_resume,
.driver = {
.name = "adx-backlight",
.owner = THIS_MODULE,
},
};
static int __init adx_backlight_init(void)
{
return platform_driver_register(&adx_backlight_driver);
}
static void __exit adx_backlight_exit(void)
{
platform_driver_unregister(&adx_backlight_driver);
}
module_init(adx_backlight_init);
module_exit(adx_backlight_exit);
MODULE_AUTHOR("Thierry Reding <thierry.reding@avionic-design.de>");
MODULE_DESCRIPTION("Avionic Design Xanthos Backlight Driver");
MODULE_LICENSE("GPL v2");
...@@ -73,6 +73,27 @@ static inline void backlight_unregister_fb(struct backlight_device *bd) ...@@ -73,6 +73,27 @@ static inline void backlight_unregister_fb(struct backlight_device *bd)
} }
#endif /* CONFIG_FB */ #endif /* CONFIG_FB */
static void backlight_generate_event(struct backlight_device *bd,
enum backlight_update_reason reason)
{
char *envp[2];
switch (reason) {
case BACKLIGHT_UPDATE_SYSFS:
envp[0] = "SOURCE=sysfs";
break;
case BACKLIGHT_UPDATE_HOTKEY:
envp[0] = "SOURCE=hotkey";
break;
default:
envp[0] = "SOURCE=unknown";
break;
}
envp[1] = NULL;
kobject_uevent_env(&bd->dev.kobj, KOBJ_CHANGE, envp);
sysfs_notify(&bd->dev.kobj, NULL, "actual_brightness");
}
static ssize_t backlight_show_power(struct device *dev, static ssize_t backlight_show_power(struct device *dev,
struct device_attribute *attr,char *buf) struct device_attribute *attr,char *buf)
{ {
...@@ -142,6 +163,8 @@ static ssize_t backlight_store_brightness(struct device *dev, ...@@ -142,6 +163,8 @@ static ssize_t backlight_store_brightness(struct device *dev,
} }
mutex_unlock(&bd->ops_lock); mutex_unlock(&bd->ops_lock);
backlight_generate_event(bd, BACKLIGHT_UPDATE_SYSFS);
return rc; return rc;
} }
...@@ -213,6 +236,25 @@ static struct device_attribute bl_device_attributes[] = { ...@@ -213,6 +236,25 @@ static struct device_attribute bl_device_attributes[] = {
__ATTR_NULL, __ATTR_NULL,
}; };
/**
* backlight_force_update - tell the backlight subsystem that hardware state
* has changed
* @bd: the backlight device to update
*
* Updates the internal state of the backlight in response to a hardware event,
* and generate a uevent to notify userspace
*/
void backlight_force_update(struct backlight_device *bd,
enum backlight_update_reason reason)
{
mutex_lock(&bd->ops_lock);
if (bd->ops && bd->ops->get_brightness)
bd->props.brightness = bd->ops->get_brightness(bd);
mutex_unlock(&bd->ops_lock);
backlight_generate_event(bd, reason);
}
EXPORT_SYMBOL(backlight_force_update);
/** /**
* backlight_device_register - create and register a new object of * backlight_device_register - create and register a new object of
* backlight_device class. * backlight_device class.
......
...@@ -103,7 +103,7 @@ static struct backlight_ops hp680bl_ops = { ...@@ -103,7 +103,7 @@ static struct backlight_ops hp680bl_ops = {
.update_status = hp680bl_set_intensity, .update_status = hp680bl_set_intensity,
}; };
static int __init hp680bl_probe(struct platform_device *pdev) static int __devinit hp680bl_probe(struct platform_device *pdev)
{ {
struct backlight_device *bd; struct backlight_device *bd;
......
/*
* lms283gf05.c -- support for Samsung LMS283GF05 LCD
*
* Copyright (c) 2009 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/device.h>
#include <linux/kernel.h>
#include <linux/delay.h>
#include <linux/gpio.h>
#include <linux/lcd.h>
#include <linux/spi/spi.h>
#include <linux/spi/lms283gf05.h>
struct lms283gf05_state {
struct spi_device *spi;
struct lcd_device *ld;
};
struct lms283gf05_seq {
unsigned char reg;
unsigned short value;
unsigned char delay;
};
/* Magic sequences supplied by manufacturer, for details refer to datasheet */
static struct lms283gf05_seq disp_initseq[] = {
/* REG, VALUE, DELAY */
{ 0x07, 0x0000, 0 },
{ 0x13, 0x0000, 10 },
{ 0x11, 0x3004, 0 },
{ 0x14, 0x200F, 0 },
{ 0x10, 0x1a20, 0 },
{ 0x13, 0x0040, 50 },
{ 0x13, 0x0060, 0 },
{ 0x13, 0x0070, 200 },
{ 0x01, 0x0127, 0 },
{ 0x02, 0x0700, 0 },
{ 0x03, 0x1030, 0 },
{ 0x08, 0x0208, 0 },
{ 0x0B, 0x0620, 0 },
{ 0x0C, 0x0110, 0 },
{ 0x30, 0x0120, 0 },
{ 0x31, 0x0127, 0 },
{ 0x32, 0x0000, 0 },
{ 0x33, 0x0503, 0 },
{ 0x34, 0x0727, 0 },
{ 0x35, 0x0124, 0 },
{ 0x36, 0x0706, 0 },
{ 0x37, 0x0701, 0 },
{ 0x38, 0x0F00, 0 },
{ 0x39, 0x0F00, 0 },
{ 0x40, 0x0000, 0 },
{ 0x41, 0x0000, 0 },
{ 0x42, 0x013f, 0 },
{ 0x43, 0x0000, 0 },
{ 0x44, 0x013f, 0 },
{ 0x45, 0x0000, 0 },
{ 0x46, 0xef00, 0 },
{ 0x47, 0x013f, 0 },
{ 0x48, 0x0000, 0 },
{ 0x07, 0x0015, 30 },
{ 0x07, 0x0017, 0 },
{ 0x20, 0x0000, 0 },
{ 0x21, 0x0000, 0 },
{ 0x22, 0x0000, 0 }
};
static struct lms283gf05_seq disp_pdwnseq[] = {
{ 0x07, 0x0016, 30 },
{ 0x07, 0x0004, 0 },
{ 0x10, 0x0220, 20 },
{ 0x13, 0x0060, 50 },
{ 0x13, 0x0040, 50 },
{ 0x13, 0x0000, 0 },
{ 0x10, 0x0000, 0 }
};
static void lms283gf05_reset(unsigned long gpio, bool inverted)
{
gpio_set_value(gpio, !inverted);
mdelay(100);
gpio_set_value(gpio, inverted);
mdelay(20);
gpio_set_value(gpio, !inverted);
mdelay(20);
}
static void lms283gf05_toggle(struct spi_device *spi,
struct lms283gf05_seq *seq, int sz)
{
char buf[3];
int i;
for (i = 0; i < sz; i++) {
buf[0] = 0x74;
buf[1] = 0x00;
buf[2] = seq[i].reg;
spi_write(spi, buf, 3);
buf[0] = 0x76;
buf[1] = seq[i].value >> 8;
buf[2] = seq[i].value & 0xff;
spi_write(spi, buf, 3);
mdelay(seq[i].delay);
}
}
static int lms283gf05_power_set(struct lcd_device *ld, int power)
{
struct lms283gf05_state *st = lcd_get_data(ld);
struct spi_device *spi = st->spi;
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
if (power) {
if (pdata)
lms283gf05_reset(pdata->reset_gpio,
pdata->reset_inverted);
lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
} else {
lms283gf05_toggle(spi, disp_pdwnseq, ARRAY_SIZE(disp_pdwnseq));
if (pdata)
gpio_set_value(pdata->reset_gpio,
pdata->reset_inverted);
}
return 0;
}
static struct lcd_ops lms_ops = {
.set_power = lms283gf05_power_set,
.get_power = NULL,
};
static int __devinit lms283gf05_probe(struct spi_device *spi)
{
struct lms283gf05_state *st;
struct lms283gf05_pdata *pdata = spi->dev.platform_data;
struct lcd_device *ld;
int ret = 0;
if (pdata != NULL) {
ret = gpio_request(pdata->reset_gpio, "LMS285GF05 RESET");
if (ret)
return ret;
ret = gpio_direction_output(pdata->reset_gpio,
!pdata->reset_inverted);
if (ret)
goto err;
}
st = kzalloc(sizeof(struct lms283gf05_state), GFP_KERNEL);
if (st == NULL) {
dev_err(&spi->dev, "No memory for device state\n");
ret = -ENOMEM;
goto err;
}
ld = lcd_device_register("lms283gf05", &spi->dev, st, &lms_ops);
if (IS_ERR(ld)) {
ret = PTR_ERR(ld);
goto err2;
}
st->spi = spi;
st->ld = ld;
dev_set_drvdata(&spi->dev, st);
/* kick in the LCD */
if (pdata)
lms283gf05_reset(pdata->reset_gpio, pdata->reset_inverted);
lms283gf05_toggle(spi, disp_initseq, ARRAY_SIZE(disp_initseq));
return 0;
err2:
kfree(st);
err:
if (pdata != NULL)
gpio_free(pdata->reset_gpio);
return ret;
}
static int __devexit lms283gf05_remove(struct spi_device *spi)
{
struct lms283gf05_state *st = dev_get_drvdata(&spi->dev);
struct lms283gf05_pdata *pdata = st->spi->dev.platform_data;
lcd_device_unregister(st->ld);
if (pdata != NULL)
gpio_free(pdata->reset_gpio);
kfree(st);
return 0;
}
static struct spi_driver lms283gf05_driver = {
.driver = {
.name = "lms283gf05",
.owner = THIS_MODULE,
},
.probe = lms283gf05_probe,
.remove = __devexit_p(lms283gf05_remove),
};
static __init int lms283gf05_init(void)
{
return spi_register_driver(&lms283gf05_driver);
}
static __exit void lms283gf05_exit(void)
{
spi_unregister_driver(&lms283gf05_driver);
}
module_init(lms283gf05_init);
module_exit(lms283gf05_exit);
MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>");
MODULE_DESCRIPTION("LCD283GF05 LCD");
MODULE_LICENSE("GPL v2");
...@@ -164,6 +164,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { ...@@ -164,6 +164,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
}, },
.driver_data = (void *)&intel_chipset_data, .driver_data = (void *)&intel_chipset_data,
}, },
{
.callback = mbp_dmi_match,
.ident = "MacBookAir 1,1",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookAir1,1"),
},
.driver_data = (void *)&intel_chipset_data,
},
{ {
.callback = mbp_dmi_match, .callback = mbp_dmi_match,
.ident = "MacBook 5,1", .ident = "MacBook 5,1",
...@@ -173,6 +182,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { ...@@ -173,6 +182,15 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
}, },
.driver_data = (void *)&nvidia_chipset_data, .driver_data = (void *)&nvidia_chipset_data,
}, },
{
.callback = mbp_dmi_match,
.ident = "MacBook 5,2",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBook5,2"),
},
.driver_data = (void *)&nvidia_chipset_data,
},
{ {
.callback = mbp_dmi_match, .callback = mbp_dmi_match,
.ident = "MacBookAir 2,1", .ident = "MacBookAir 2,1",
...@@ -191,6 +209,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = { ...@@ -191,6 +209,24 @@ static const struct dmi_system_id __initdata mbp_device_table[] = {
}, },
.driver_data = (void *)&nvidia_chipset_data, .driver_data = (void *)&nvidia_chipset_data,
}, },
{
.callback = mbp_dmi_match,
.ident = "MacBookPro 5,2",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,2"),
},
.driver_data = (void *)&nvidia_chipset_data,
},
{
.callback = mbp_dmi_match,
.ident = "MacBookPro 5,5",
.matches = {
DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
DMI_MATCH(DMI_PRODUCT_NAME, "MacBookPro5,5"),
},
.driver_data = (void *)&nvidia_chipset_data,
},
{ } { }
}; };
......
/*
* Backlight driver for Wolfson Microelectronics WM831x PMICs
*
* Copyright 2009 Wolfson Microelectonics plc
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*/
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/platform_device.h>
#include <linux/fb.h>
#include <linux/backlight.h>
#include <linux/mfd/wm831x/core.h>
#include <linux/mfd/wm831x/pdata.h>
#include <linux/mfd/wm831x/regulator.h>
struct wm831x_backlight_data {
struct wm831x *wm831x;
int isink_reg;
int current_brightness;
};
static int wm831x_backlight_set(struct backlight_device *bl, int brightness)
{
struct wm831x_backlight_data *data = bl_get_data(bl);
struct wm831x *wm831x = data->wm831x;
int power_up = !data->current_brightness && brightness;
int power_down = data->current_brightness && !brightness;
int ret;
if (power_up) {
/* Enable the ISINK */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_ENA, WM831X_CS1_ENA);
if (ret < 0)
goto err;
/* Enable the DC-DC */
ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
WM831X_DC4_ENA, WM831X_DC4_ENA);
if (ret < 0)
goto err;
}
if (power_down) {
/* DCDC first */
ret = wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE,
WM831X_DC4_ENA, 0);
if (ret < 0)
goto err;
/* ISINK */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_DRIVE | WM831X_CS1_ENA, 0);
if (ret < 0)
goto err;
}
/* Set the new brightness */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_ISEL_MASK, brightness);
if (ret < 0)
goto err;
if (power_up) {
/* Drive current through the ISINK */
ret = wm831x_set_bits(wm831x, data->isink_reg,
WM831X_CS1_DRIVE, WM831X_CS1_DRIVE);
if (ret < 0)
return ret;
}
data->current_brightness = brightness;
return 0;
err:
/* If we were in the middle of a power transition always shut down
* for safety.
*/
if (power_up || power_down) {
wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
wm831x_set_bits(wm831x, data->isink_reg, WM831X_CS1_ENA, 0);
}
return ret;
}
static int wm831x_backlight_update_status(struct backlight_device *bl)
{
int brightness = bl->props.brightness;
if (bl->props.power != FB_BLANK_UNBLANK)
brightness = 0;
if (bl->props.fb_blank != FB_BLANK_UNBLANK)
brightness = 0;
if (bl->props.state & BL_CORE_SUSPENDED)
brightness = 0;
return wm831x_backlight_set(bl, brightness);
}
static int wm831x_backlight_get_brightness(struct backlight_device *bl)
{
struct wm831x_backlight_data *data = bl_get_data(bl);
return data->current_brightness;
}
static struct backlight_ops wm831x_backlight_ops = {
.options = BL_CORE_SUSPENDRESUME,
.update_status = wm831x_backlight_update_status,
.get_brightness = wm831x_backlight_get_brightness,
};
static int wm831x_backlight_probe(struct platform_device *pdev)
{
struct wm831x *wm831x = dev_get_drvdata(pdev->dev.parent);
struct wm831x_pdata *wm831x_pdata;
struct wm831x_backlight_pdata *pdata;
struct wm831x_backlight_data *data;
struct backlight_device *bl;
int ret, i, max_isel, isink_reg, dcdc_cfg;
/* We need platform data */
if (pdev->dev.parent->platform_data) {
wm831x_pdata = pdev->dev.parent->platform_data;
pdata = wm831x_pdata->backlight;
} else {
pdata = NULL;
}
if (!pdata) {
dev_err(&pdev->dev, "No platform data supplied\n");
return -EINVAL;
}
/* Figure out the maximum current we can use */
for (i = 0; i < WM831X_ISINK_MAX_ISEL; i++) {
if (wm831x_isinkv_values[i] > pdata->max_uA)
break;
}
if (i == 0) {
dev_err(&pdev->dev, "Invalid max_uA: %duA\n", pdata->max_uA);
return -EINVAL;
}
max_isel = i - 1;
if (pdata->max_uA != wm831x_isinkv_values[max_isel])
dev_warn(&pdev->dev,
"Maximum current is %duA not %duA as requested\n",
wm831x_isinkv_values[max_isel], pdata->max_uA);
switch (pdata->isink) {
case 1:
isink_reg = WM831X_CURRENT_SINK_1;
dcdc_cfg = 0;
break;
case 2:
isink_reg = WM831X_CURRENT_SINK_2;
dcdc_cfg = WM831X_DC4_FBSRC;
break;
default:
dev_err(&pdev->dev, "Invalid ISINK %d\n", pdata->isink);
return -EINVAL;
}
/* Configure the ISINK to use for feedback */
ret = wm831x_reg_unlock(wm831x);
if (ret < 0)
return ret;
ret = wm831x_set_bits(wm831x, WM831X_DC4_CONTROL, WM831X_DC4_FBSRC,
dcdc_cfg);
wm831x_reg_lock(wm831x);
if (ret < 0)
return ret;
data = kzalloc(sizeof(*data), GFP_KERNEL);
if (data == NULL)
return -ENOMEM;
data->wm831x = wm831x;
data->current_brightness = 0;
data->isink_reg = isink_reg;
bl = backlight_device_register("wm831x", &pdev->dev,
data, &wm831x_backlight_ops);
if (IS_ERR(bl)) {
dev_err(&pdev->dev, "failed to register backlight\n");
kfree(data);
return PTR_ERR(bl);
}
bl->props.max_brightness = max_isel;
bl->props.brightness = max_isel;
platform_set_drvdata(pdev, bl);
/* Disable the DCDC if it was started so we can bootstrap */
wm831x_set_bits(wm831x, WM831X_DCDC_ENABLE, WM831X_DC4_ENA, 0);
backlight_update_status(bl);
return 0;
}
static int wm831x_backlight_remove(struct platform_device *pdev)
{
struct backlight_device *bl = platform_get_drvdata(pdev);
struct wm831x_backlight_data *data = bl_get_data(bl);
backlight_device_unregister(bl);
kfree(data);
return 0;
}
static struct platform_driver wm831x_backlight_driver = {
.driver = {
.name = "wm831x-backlight",
.owner = THIS_MODULE,
},
.probe = wm831x_backlight_probe,
.remove = wm831x_backlight_remove,
};
static int __init wm831x_backlight_init(void)
{
return platform_driver_register(&wm831x_backlight_driver);
}
module_init(wm831x_backlight_init);
static void __exit wm831x_backlight_exit(void)
{
platform_driver_unregister(&wm831x_backlight_driver);
}
module_exit(wm831x_backlight_exit);
MODULE_DESCRIPTION("Backlight Driver for WM831x PMICs");
MODULE_AUTHOR("Mark Brown <broonie@opensource.wolfsonmicro.com");
MODULE_LICENSE("GPL");
MODULE_ALIAS("platform:wm831x-backlight");
...@@ -27,6 +27,11 @@ ...@@ -27,6 +27,11 @@
* Any other use of the locks below is probably wrong. * Any other use of the locks below is probably wrong.
*/ */
enum backlight_update_reason {
BACKLIGHT_UPDATE_HOTKEY,
BACKLIGHT_UPDATE_SYSFS,
};
struct backlight_device; struct backlight_device;
struct fb_info; struct fb_info;
...@@ -100,6 +105,8 @@ static inline void backlight_update_status(struct backlight_device *bd) ...@@ -100,6 +105,8 @@ static inline void backlight_update_status(struct backlight_device *bd)
extern struct backlight_device *backlight_device_register(const char *name, extern struct backlight_device *backlight_device_register(const char *name,
struct device *dev, void *devdata, struct backlight_ops *ops); struct device *dev, void *devdata, struct backlight_ops *ops);
extern void backlight_device_unregister(struct backlight_device *bd); extern void backlight_device_unregister(struct backlight_device *bd);
extern void backlight_force_update(struct backlight_device *bd,
enum backlight_update_reason reason);
#define to_backlight_device(obj) container_of(obj, struct backlight_device, dev) #define to_backlight_device(obj) container_of(obj, struct backlight_device, dev)
......
/*
* lms283gf05.h - Platform glue for Samsung LMS283GF05 LCD
*
* Copyright (C) 2009 Marek Vasut <marek.vasut@gmail.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*/
#ifndef _INCLUDE_LINUX_SPI_LMS283GF05_H_
#define _INCLUDE_LINUX_SPI_LMS283GF05_H_
struct lms283gf05_pdata {
unsigned long reset_gpio;
bool reset_inverted;
};
#endif /* _INCLUDE_LINUX_SPI_LMS283GF05_H_ */
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment