Merge ath-next from ath.git

Major changes:

wil6210:

* add modparam for bcast ring size
* support hidden SSID
* add per-MCS Rx stats

drivers/net/wireless/ath/ath10k/core.c

@@ -48,6 +48,7 @@ static const struct ath10k_hw_params ath10k_hw_params_list[] = {
 		.name = "qca988x hw2.0",
 		.patch_load_addr = QCA988X_HW_2_0_PATCH_LOAD_ADDR,
 		.uart_pin = 7,
+		.has_shifted_cc_wraparound = true,
 		.fw = {
 			.dir = QCA988X_HW_2_0_FW_DIR,
 			.fw = QCA988X_HW_2_0_FW_FILE,
@@ -1084,6 +1085,22 @@ int ath10k_core_start(struct ath10k *ar, enum ath10k_firmware_mode mode)
 	if (status)
 		goto err;
 
+	/* Some of of qca988x solutions are having global reset issue
+         * during target initialization. Bypassing PLL setting before
+         * downloading firmware and letting the SoC run on REF_CLK is
+         * fixing the problem. Corresponding firmware change is also needed
+         * to set the clock source once the target is initialized.
+	 */
+	if (test_bit(ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT,
+		     ar->fw_features)) {
+		status = ath10k_bmi_write32(ar, hi_skip_clock_init, 1);
+		if (status) {
+			ath10k_err(ar, "could not write to skip_clock_init: %d\n",
+				   status);
+			goto err;
+		}
+	}
+
 	status = ath10k_download_fw(ar, mode);
 	if (status)
 		goto err;

drivers/net/wireless/ath/ath10k/core.h

@@ -284,15 +284,6 @@ struct ath10k_sta {
 #endif
 };
 
-struct ath10k_chanctx {
-	/* Used to story copy of chanctx_conf to avoid inconsistencies. Ideally
-	 * mac80211 should allow some sort of explicit locking to guarantee
-	 * that the publicly available chanctx_conf can be accessed safely at
-	 * all times.
-	 */
-	struct ieee80211_chanctx_conf conf;
-};
-
 #define ATH10K_VDEV_SETUP_TIMEOUT_HZ (5*HZ)
 
 enum ath10k_beacon_state {
@@ -468,6 +459,9 @@ enum ath10k_fw_features {
 	 */
 	ATH10K_FW_FEATURE_NO_NWIFI_DECAP_4ADDR_PADDING,
 
+	/* Firmware supports bypassing PLL setting on init. */
+	ATH10K_FW_FEATURE_SUPPORTS_SKIP_CLOCK_INIT = 9,
+
 	/* keep last */
 	ATH10K_FW_FEATURE_COUNT,
 };
@@ -577,6 +571,13 @@ struct ath10k {
 		u32 patch_load_addr;
 		int uart_pin;
 
+		/* This is true if given HW chip has a quirky Cycle Counter
+		 * wraparound which resets to 0x7fffffff instead of 0. All
+		 * other CC related counters (e.g. Rx Clear Count) are divided
+		 * by 2 so they never wraparound themselves.
+		 */
+		bool has_shifted_cc_wraparound;
+
 		struct ath10k_hw_params_fw {
 			const char *dir;
 			const char *fw;
@@ -694,6 +695,14 @@ struct ath10k {
 	u32 survey_last_cycle_count;
 	struct survey_info survey[ATH10K_NUM_CHANS];
 
+	/* Channel info events are expected to come in pairs without and with
+	 * COMPLETE flag set respectively for each channel visit during scan.
+	 *
+	 * However there are deviations from this rule. This flag is used to
+	 * avoid reporting garbage data.
+	 */
+	bool ch_info_can_report_survey;
+
 	struct dfs_pattern_detector *dfs_detector;
 
 	unsigned long tx_paused; /* see ATH10K_TX_PAUSE_ */

drivers/net/wireless/ath/ath10k/hw.c

@@ -15,6 +15,7 @@
  */
 
 #include <linux/types.h>
+#include "core.h"
 #include "hw.h"
 
 const struct ath10k_hw_regs qca988x_regs = {
@@ -56,3 +57,23 @@ const struct ath10k_hw_regs qca6174_regs = {
 	.soc_chip_id_address			= 0x000f0,
 	.scratch_3_address			= 0x0028,
 };
+
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev)
+{
+	u32 cc_fix = 0;
+
+	survey->filled |= SURVEY_INFO_TIME |
+			  SURVEY_INFO_TIME_BUSY;
+
+	if (ar->hw_params.has_shifted_cc_wraparound && cc < cc_prev) {
+		cc_fix = 0x7fffffff;
+		survey->filled &= ~SURVEY_INFO_TIME_BUSY;
+	}
+
+	cc -= cc_prev - cc_fix;
+	rcc -= rcc_prev;
+
+	survey->time = CCNT_TO_MSEC(cc);
+	survey->time_busy = CCNT_TO_MSEC(rcc);
+}

drivers/net/wireless/ath/ath10k/hw.h

@@ -169,6 +169,9 @@ struct ath10k_hw_regs {
 extern const struct ath10k_hw_regs qca988x_regs;
 extern const struct ath10k_hw_regs qca6174_regs;
 
+void ath10k_hw_fill_survey_time(struct ath10k *ar, struct survey_info *survey,
+				u32 cc, u32 rcc, u32 cc_prev, u32 rcc_prev);
+
 #define QCA_REV_988X(ar) ((ar)->hw_rev == ATH10K_HW_QCA988X)
 #define QCA_REV_6174(ar) ((ar)->hw_rev == ATH10K_HW_QCA6174)
 
@@ -449,6 +452,9 @@ enum ath10k_hw_rate_cck {
 #define SCRATCH_3_ADDRESS			ar->regs->scratch_3_address
 #define CPU_INTR_ADDRESS			0x0010
 
+/* Cycle counters are running at 88MHz */
+#define CCNT_TO_MSEC(x) ((x) / 88000)
+
 /* Firmware indications to the Host via SCRATCH_3 register. */
 #define FW_INDICATOR_ADDRESS	(SOC_CORE_BASE_ADDRESS + SCRATCH_3_ADDRESS)
 #define FW_IND_EVENT_PENDING			1

drivers/net/wireless/ath/ath10k/mac.c

@@ -3949,83 +3949,6 @@ static int ath10k_config_ps(struct ath10k *ar)
 	return ret;
 }
 
-static void ath10k_mac_chan_reconfigure(struct ath10k *ar)
-{
-	struct ath10k_vif *arvif;
-	struct cfg80211_chan_def def;
-	int ret;
-
-	lockdep_assert_held(&ar->conf_mutex);
-
-	ath10k_dbg(ar, ATH10K_DBG_MAC, "mac chan reconfigure\n");
-
-	/* First stop monitor interface. Some FW versions crash if there's a
-	 * lone monitor interface. */
-	if (ar->monitor_started)
-		ath10k_monitor_stop(ar);
-
-	list_for_each_entry(arvif, &ar->arvifs, list) {
-		if (!arvif->is_started)
-			continue;
-
-		if (!arvif->is_up)
-			continue;
-
-		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
-			continue;
-
-		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
-		if (ret) {
-			ath10k_warn(ar, "failed to down vdev %d: %d\n",
-				    arvif->vdev_id, ret);
-			continue;
-		}
-	}
-
-	/* all vdevs are downed now - attempt to restart and re-up them */
-
-	list_for_each_entry(arvif, &ar->arvifs, list) {
-		if (!arvif->is_started)
-			continue;
-
-		if (arvif->vdev_type == WMI_VDEV_TYPE_MONITOR)
-			continue;
-
-		ret = ath10k_mac_setup_bcn_tmpl(arvif);
-		if (ret)
-			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
-				    ret);
-
-		ret = ath10k_mac_setup_prb_tmpl(arvif);
-		if (ret)
-			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
-				    ret);
-
-		if (WARN_ON(ath10k_mac_vif_chan(arvif->vif, &def)))
-			continue;
-
-		ret = ath10k_vdev_restart(arvif, &def);
-		if (ret) {
-			ath10k_warn(ar, "failed to restart vdev %d: %d\n",
-				    arvif->vdev_id, ret);
-			continue;
-		}
-
-		if (!arvif->is_up)
-			continue;
-
-		ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
-					 arvif->bssid);
-		if (ret) {
-			ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
-				    arvif->vdev_id, ret);
-			continue;
-		}
-	}
-
-	ath10k_monitor_recalc(ar);
-}
-
 static int ath10k_mac_txpower_setup(struct ath10k *ar, int txpower)
 {
 	int ret;
@@ -6144,7 +6067,10 @@ static int ath10k_ampdu_action(struct ieee80211_hw *hw,
 }
 
 static void
-ath10k_mac_update_rx_channel(struct ath10k *ar)
+ath10k_mac_update_rx_channel(struct ath10k *ar,
+			     struct ieee80211_chanctx_conf *ctx,
+			     struct ieee80211_vif_chanctx_switch *vifs,
+			     int n_vifs)
 {
 	struct cfg80211_chan_def *def = NULL;
 
@@ -6154,6 +6080,9 @@ ath10k_mac_update_rx_channel(struct ath10k *ar)
 	lockdep_assert_held(&ar->conf_mutex);
 	lockdep_assert_held(&ar->data_lock);
 
+	WARN_ON(ctx && vifs);
+	WARN_ON(vifs && n_vifs != 1);
+
 	/* FIXME: Sort of an optimization and a workaround. Peers and vifs are
 	 * on a linked list now. Doing a lookup peer -> vif -> chanctx for each
 	 * ppdu on Rx may reduce performance on low-end systems. It should be
@@ -6165,36 +6094,28 @@ ath10k_mac_update_rx_channel(struct ath10k *ar)
 	 * affected much.
 	 */
 	rcu_read_lock();
-	if (ath10k_mac_num_chanctxs(ar) == 1) {
+	if (!ctx && ath10k_mac_num_chanctxs(ar) == 1) {
 		ieee80211_iter_chan_contexts_atomic(ar->hw,
 					ath10k_mac_get_any_chandef_iter,
 					&def);
+
+		if (vifs)
+			def = &vifs[0].new_ctx->def;
+
 		ar->rx_channel = def->chan;
+	} else if (ctx && ath10k_mac_num_chanctxs(ar) == 0) {
+		ar->rx_channel = ctx->def.chan;
 	} else {
 		ar->rx_channel = NULL;
 	}
 	rcu_read_unlock();
 }
 
-static void
-ath10k_mac_chan_ctx_init(struct ath10k *ar,
-			 struct ath10k_chanctx *arctx,
-			 struct ieee80211_chanctx_conf *conf)
-{
-	lockdep_assert_held(&ar->conf_mutex);
-	lockdep_assert_held(&ar->data_lock);
-
-	memset(arctx, 0, sizeof(*arctx));
-
-	arctx->conf = *conf;
-}
-
 static int
 ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
 			  struct ieee80211_chanctx_conf *ctx)
 {
 	struct ath10k *ar = hw->priv;
-	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
 
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
 		   "mac chanctx add freq %hu width %d ptr %p\n",
@@ -6203,8 +6124,7 @@ ath10k_mac_op_add_chanctx(struct ieee80211_hw *hw,
 	mutex_lock(&ar->conf_mutex);
 
 	spin_lock_bh(&ar->data_lock);
-	ath10k_mac_chan_ctx_init(ar, arctx, ctx);
-	ath10k_mac_update_rx_channel(ar);
+	ath10k_mac_update_rx_channel(ar, ctx, NULL, 0);
 	spin_unlock_bh(&ar->data_lock);
 
 	ath10k_recalc_radar_detection(ar);
@@ -6228,7 +6148,7 @@ ath10k_mac_op_remove_chanctx(struct ieee80211_hw *hw,
 	mutex_lock(&ar->conf_mutex);
 
 	spin_lock_bh(&ar->data_lock);
-	ath10k_mac_update_rx_channel(ar);
+	ath10k_mac_update_rx_channel(ar, NULL, NULL, 0);
 	spin_unlock_bh(&ar->data_lock);
 
 	ath10k_recalc_radar_detection(ar);
@@ -6243,16 +6163,12 @@ ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
 			     u32 changed)
 {
 	struct ath10k *ar = hw->priv;
-	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
 
 	mutex_lock(&ar->conf_mutex);
 
 	ath10k_dbg(ar, ATH10K_DBG_MAC,
-		   "mac chanctx change freq %hu->%hu width %d->%d ptr %p changed %x\n",
-		   arctx->conf.def.chan->center_freq,
-		   ctx->def.chan->center_freq,
-		   arctx->conf.def.width, ctx->def.width,
-		   ctx, changed);
+		   "mac chanctx change freq %hu width %d ptr %p changed %x\n",
+		   ctx->def.chan->center_freq, ctx->def.width, ctx, changed);
 
 	/* This shouldn't really happen because channel switching should use
 	 * switch_vif_chanctx().
@@ -6260,10 +6176,6 @@ ath10k_mac_op_change_chanctx(struct ieee80211_hw *hw,
 	if (WARN_ON(changed & IEEE80211_CHANCTX_CHANGE_CHANNEL))
 		goto unlock;
 
-	spin_lock_bh(&ar->data_lock);
-	arctx->conf = *ctx;
-	spin_unlock_bh(&ar->data_lock);
-
 	ath10k_recalc_radar_detection(ar);
 
 	/* FIXME: How to configure Rx chains properly? */
@@ -6283,7 +6195,6 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 				 struct ieee80211_chanctx_conf *ctx)
 {
 	struct ath10k *ar = hw->priv;
-	struct ath10k_chanctx *arctx = (void *)ctx->drv_priv;
 	struct ath10k_vif *arvif = (void *)vif->drv_priv;
 	int ret;
 
@@ -6298,11 +6209,11 @@ ath10k_mac_op_assign_vif_chanctx(struct ieee80211_hw *hw,
 		return -EBUSY;
 	}
 
-	ret = ath10k_vdev_start(arvif, &arctx->conf.def);
+	ret = ath10k_vdev_start(arvif, &ctx->def);
 	if (ret) {
 		ath10k_warn(ar, "failed to start vdev %i addr %pM on freq %d: %d\n",
 			    arvif->vdev_id, vif->addr,
-			    arctx->conf.def.chan->center_freq, ret);
+			    ctx->def.chan->center_freq, ret);
 		goto err;
 	}
 
@@ -6377,7 +6288,7 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
 {
 	struct ath10k *ar = hw->priv;
 	struct ath10k_vif *arvif;
-	struct ath10k_chanctx *arctx_new, *arctx_old;
+	int ret;
 	int i;
 
 	mutex_lock(&ar->conf_mutex);
@@ -6386,38 +6297,81 @@ ath10k_mac_op_switch_vif_chanctx(struct ieee80211_hw *hw,
 		   "mac chanctx switch n_vifs %d mode %d\n",
 		   n_vifs, mode);
 
-	spin_lock_bh(&ar->data_lock);
+	/* First stop monitor interface. Some FW versions crash if there's a
+	 * lone monitor interface.
+	 */
+	if (ar->monitor_started)
+		ath10k_monitor_stop(ar);
+
 	for (i = 0; i < n_vifs; i++) {
 		arvif = ath10k_vif_to_arvif(vifs[i].vif);
-		arctx_new = (void *)vifs[i].new_ctx->drv_priv;
-		arctx_old = (void *)vifs[i].old_ctx->drv_priv;
 
 		ath10k_dbg(ar, ATH10K_DBG_MAC,
-			   "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d ptr %p->%p\n",
+			   "mac chanctx switch vdev_id %i freq %hu->%hu width %d->%d\n",
 			   arvif->vdev_id,
 			   vifs[i].old_ctx->def.chan->center_freq,
 			   vifs[i].new_ctx->def.chan->center_freq,
 			   vifs[i].old_ctx->def.width,
-			   vifs[i].new_ctx->def.width,
-			   arctx_old, arctx_new);
+			   vifs[i].new_ctx->def.width);
 
-		if (mode == CHANCTX_SWMODE_SWAP_CONTEXTS) {
-			ath10k_mac_chan_ctx_init(ar, arctx_new,
-						 vifs[i].new_ctx);
-		}
+		if (WARN_ON(!arvif->is_started))
+			continue;
 
-		arctx_new->conf = *vifs[i].new_ctx;
+		if (WARN_ON(!arvif->is_up))
+			continue;
 
-		/* FIXME: ath10k_mac_chan_reconfigure() uses current, i.e. not
-		 * yet updated chanctx_conf pointer.
-		 */
-		arctx_old->conf = *vifs[i].new_ctx;
+		ret = ath10k_wmi_vdev_down(ar, arvif->vdev_id);
+		if (ret) {
+			ath10k_warn(ar, "failed to down vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
 	}
-	ath10k_mac_update_rx_channel(ar);
+
+	/* All relevant vdevs are downed and associated channel resources
+	 * should be available for the channel switch now.
+	 */
+
+	spin_lock_bh(&ar->data_lock);
+	ath10k_mac_update_rx_channel(ar, NULL, vifs, n_vifs);
 	spin_unlock_bh(&ar->data_lock);
 
-	/* FIXME: Reconfigure only affected vifs */
-	ath10k_mac_chan_reconfigure(ar);
+	for (i = 0; i < n_vifs; i++) {
+		arvif = ath10k_vif_to_arvif(vifs[i].vif);
+
+		if (WARN_ON(!arvif->is_started))
+			continue;
+
+		if (WARN_ON(!arvif->is_up))
+			continue;
+
+		ret = ath10k_mac_setup_bcn_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update bcn tmpl during csa: %d\n",
+				    ret);
+
+		ret = ath10k_mac_setup_prb_tmpl(arvif);
+		if (ret)
+			ath10k_warn(ar, "failed to update prb tmpl during csa: %d\n",
+				    ret);
+
+		ret = ath10k_vdev_restart(arvif, &vifs[i].new_ctx->def);
+		if (ret) {
+			ath10k_warn(ar, "failed to restart vdev %d: %d\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+
+		ret = ath10k_wmi_vdev_up(arvif->ar, arvif->vdev_id, arvif->aid,
+					 arvif->bssid);
+		if (ret) {
+			ath10k_warn(ar, "failed to bring vdev up %d: %d\n",
+				    arvif->vdev_id, ret);
+			continue;
+		}
+	}
+
+	ath10k_monitor_recalc(ar);
 
 	mutex_unlock(&ar->conf_mutex);
 	return 0;
@@ -6914,7 +6868,6 @@ int ath10k_mac_register(struct ath10k *ar)
 
 	ar->hw->vif_data_size = sizeof(struct ath10k_vif);
 	ar->hw->sta_data_size = sizeof(struct ath10k_sta);
-	ar->hw->chanctx_data_size = sizeof(struct ath10k_chanctx);
 
 	ar->hw->max_listen_interval = ATH10K_MAX_HW_LISTEN_INTERVAL;
 

drivers/net/wireless/ath/ath10k/pci.c

@@ -1424,7 +1424,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 	struct ath10k_ce_ring *ce_ring;
 	struct ce_desc *ce_desc;
 	struct sk_buff *skb;
-	unsigned int id;
 	int i;
 
 	ar = pci_pipe->hif_ce_state;
@@ -1448,8 +1447,6 @@ static void ath10k_pci_tx_pipe_cleanup(struct ath10k_pci_pipe *pci_pipe)
 			continue;
 
 		ce_ring->per_transfer_context[i] = NULL;
-		id = MS(__le16_to_cpu(ce_desc[i].flags),
-			CE_DESC_FLAGS_META_DATA);
 
 		ar_pci->msg_callbacks_current.tx_completion(ar, skb);
 	}
@@ -2850,6 +2847,7 @@ static int ath10k_pci_probe(struct pci_dev *pdev,
 	ath10k_pci_free_pipes(ar);
 
 err_sleep:
+	ath10k_pci_sleep_sync(ar);
 	ath10k_pci_release(ar);
 
 err_core_destroy:
@@ -2927,8 +2925,10 @@ MODULE_FIRMWARE(QCA988X_HW_2_0_FW_DIR "/" QCA988X_HW_2_0_BOARD_DATA_FILE);
 
 /* QCA6174 2.1 firmware files */
 MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_FW_API4_FILE);
+MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" ATH10K_FW_API5_FILE);
 MODULE_FIRMWARE(QCA6174_HW_2_1_FW_DIR "/" QCA6174_HW_2_1_BOARD_DATA_FILE);
 
 /* QCA6174 3.1 firmware files */
 MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" ATH10K_FW_API4_FILE);
+MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" ATH10K_FW_API5_FILE);
 MODULE_FIRMWARE(QCA6174_HW_3_0_FW_DIR "/" QCA6174_HW_3_0_BOARD_DATA_FILE);

drivers/net/wireless/ath/ath10k/wmi-tlv.c

@@ -402,7 +402,7 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
 
 	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
-		return;
+		goto out;
 
 	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
 
@@ -521,6 +521,7 @@ static void ath10k_wmi_tlv_op_rx(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	}
 
+out:
 	dev_kfree_skb(skb);
 }
 

drivers/net/wireless/ath/ath10k/wmi.c

@@ -27,6 +27,7 @@
 #include "testmode.h"
 #include "wmi-ops.h"
 #include "p2p.h"
+#include "hw.h"
 
 /* MAIN WMI cmd track */
 static struct wmi_cmd_map wmi_cmd_map = {
@@ -1450,6 +1451,7 @@ int ath10k_wmi_event_mgmt_rx(struct ath10k *ar, struct sk_buff *skb)
 	ret = ath10k_wmi_pull_mgmt_rx(ar, skb, &arg);
 	if (ret) {
 		ath10k_warn(ar, "failed to parse mgmt rx event: %d\n", ret);
+		dev_kfree_skb(skb);
 		return ret;
 	}
 
@@ -1636,20 +1638,22 @@ void ath10k_wmi_event_chan_info(struct ath10k *ar, struct sk_buff *skb)
 	}
 
 	if (cmd_flags & WMI_CHAN_INFO_FLAG_COMPLETE) {
-		/* During scanning chan info is reported twice for each
-		 * visited channel. The reported cycle count is global
-		 * and per-channel cycle count must be calculated */
-
-		cycle_count -= ar->survey_last_cycle_count;
-		rx_clear_count -= ar->survey_last_rx_clear_count;
-
-		survey = &ar->survey[idx];
-		survey->time = WMI_CHAN_INFO_MSEC(cycle_count);
-		survey->time_busy = WMI_CHAN_INFO_MSEC(rx_clear_count);
-		survey->noise = noise_floor;
-		survey->filled = SURVEY_INFO_TIME |
-				 SURVEY_INFO_TIME_BUSY |
-				 SURVEY_INFO_NOISE_DBM;
+		if (ar->ch_info_can_report_survey) {
+			survey = &ar->survey[idx];
+			survey->noise = noise_floor;
+			survey->filled = SURVEY_INFO_NOISE_DBM;
+
+			ath10k_hw_fill_survey_time(ar,
+						   survey,
+						   cycle_count,
+						   rx_clear_count,
+						   ar->survey_last_cycle_count,
+						   ar->survey_last_rx_clear_count);
+		}
+
+		ar->ch_info_can_report_survey = false;
+	} else {
+		ar->ch_info_can_report_survey = true;
 	}
 
 	ar->survey_last_rx_clear_count = rx_clear_count;
@@ -3219,7 +3223,7 @@ static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
 
 	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
-		return;
+		goto out;
 
 	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
 
@@ -3323,6 +3327,7 @@ static void ath10k_wmi_op_rx(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	}
 
+out:
 	dev_kfree_skb(skb);
 }
 
@@ -3336,7 +3341,7 @@ static void ath10k_wmi_10_1_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
 
 	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
-		return;
+		goto out;
 
 	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
 
@@ -3459,7 +3464,7 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)
 	id = MS(__le32_to_cpu(cmd_hdr->cmd_id), WMI_CMD_HDR_CMD_ID);
 
 	if (skb_pull(skb, sizeof(struct wmi_cmd_hdr)) == NULL)
-		return;
+		goto out;
 
 	trace_ath10k_wmi_event(ar, id, skb->data, skb->len);
 
@@ -3567,6 +3572,7 @@ static void ath10k_wmi_10_2_op_rx(struct ath10k *ar, struct sk_buff *skb)
 		break;
 	}
 
+out:
 	dev_kfree_skb(skb);
 }
 

drivers/net/wireless/ath/ath10k/wmi.h

@@ -4665,7 +4665,6 @@ struct wmi_peer_sta_kickout_event {
 } __packed;
 
 #define WMI_CHAN_INFO_FLAG_COMPLETE BIT(0)
-#define WMI_CHAN_INFO_MSEC(x) ((x) / 88000)
 
 /* Beacon filter wmi command info */
 #define BCN_FLT_MAX_SUPPORTED_IES	256

drivers/net/wireless/ath/ath6kl/wmi.h

@@ -1527,8 +1527,8 @@ struct wmi_connect_event {
 			__le32 nw_type;
 		} sta;
 		struct {
-			u8 phymode;
 			u8 aid;
+			u8 phymode;
 			u8 mac_addr[ETH_ALEN];
 			u8 auth;
 			u8 keymgmt;

drivers/net/wireless/ath/wil6210/cfg80211.c

@@ -289,6 +289,26 @@ static int wil_cfg80211_scan(struct wiphy *wiphy,
 	}
 
 	wil_dbg_misc(wil, "Start scan_request 0x%p\n", request);
+	wil_dbg_misc(wil, "SSID count: %d", request->n_ssids);
+
+	for (i = 0; i < request->n_ssids; i++) {
+		wil_dbg_misc(wil, "SSID[%d]", i);
+		print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
+				     request->ssids[i].ssid,
+				     request->ssids[i].ssid_len);
+	}
+
+	if (request->n_ssids)
+		rc = wmi_set_ssid(wil, request->ssids[0].ssid_len,
+				  request->ssids[0].ssid);
+	else
+		rc = wmi_set_ssid(wil, 0, NULL);
+
+	if (rc) {
+		wil_err(wil, "set SSID for scan request failed: %d\n", rc);
+		return rc;
+	}
+
 	wil->scan_request = request;
 	mod_timer(&wil->scan_timer, jiffies + WIL6210_SCAN_TO);
 
@@ -778,6 +798,7 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 	size_t hlen = offsetof(struct ieee80211_mgmt, u.probe_resp.variable);
 	const u8 *pr_ies = NULL;
 	size_t pr_ies_len = 0;
+	u8 hidden_ssid;
 
 	wil_dbg_misc(wil, "%s()\n", __func__);
 
@@ -790,6 +811,8 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 		     channel->center_freq, info->privacy ? "secure" : "open");
 	wil_dbg_misc(wil, "Privacy: %d auth_type %d\n",
 		     info->privacy, info->auth_type);
+	wil_dbg_misc(wil, "Hidden SSID mode: %d\n",
+		     info->hidden_ssid);
 	wil_dbg_misc(wil, "BI %d DTIM %d\n", info->beacon_interval,
 		     info->dtim_period);
 	print_hex_dump_bytes("SSID ", DUMP_PREFIX_OFFSET,
@@ -835,10 +858,28 @@ static int wil_cfg80211_start_ap(struct wiphy *wiphy,
 
 	wil->privacy = info->privacy;
 
+	switch (info->hidden_ssid) {
+	case NL80211_HIDDEN_SSID_NOT_IN_USE:
+		hidden_ssid = WMI_HIDDEN_SSID_DISABLED;
+		break;
+
+	case NL80211_HIDDEN_SSID_ZERO_LEN:
+		hidden_ssid = WMI_HIDDEN_SSID_SEND_EMPTY;
+		break;
+
+	case NL80211_HIDDEN_SSID_ZERO_CONTENTS:
+		hidden_ssid = WMI_HIDDEN_SSID_CLEAR;
+		break;
+
+	default:
+		rc = -EOPNOTSUPP;
+		goto out;
+	}
+
 	netif_carrier_on(ndev);
 
 	rc = wmi_pcp_start(wil, info->beacon_interval, wmi_nettype,
-			   channel->hw_value);
+			   channel->hw_value, hidden_ssid);
 	if (rc)
 		goto err_pcp_start;
 
@@ -1023,8 +1064,7 @@ static struct cfg80211_ops wil_cfg80211_ops = {
 
 static void wil_wiphy_init(struct wiphy *wiphy)
 {
-	/* TODO: set real value */
-	wiphy->max_scan_ssids = 10;
+	wiphy->max_scan_ssids = 1;
 	wiphy->max_scan_ie_len = WMI_MAX_IE_LEN;
 	wiphy->max_num_pmkids = 0 /* TODO: */;
 	wiphy->interface_modes = BIT(NL80211_IFTYPE_STATION) |

drivers/net/wireless/ath/wil6210/debugfs.c

@@ -1360,7 +1360,7 @@ static int wil_sta_debugfs_show(struct seq_file *s, void *data)
 __acquires(&p->tid_rx_lock) __releases(&p->tid_rx_lock)
 {
 	struct wil6210_priv *wil = s->private;
-	int i, tid;
+	int i, tid, mcs;
 
 	for (i = 0; i < ARRAY_SIZE(wil->sta); i++) {
 		struct wil_sta_info *p = &wil->sta[i];
@@ -1390,6 +1390,12 @@ __acquires(&p->tid_rx_lock) __releases(&p->tid_rx_lock)
 				}
 			}
 			spin_unlock_bh(&p->tid_rx_lock);
+			seq_puts(s, "Rx/MCS:");
+			for (mcs = 0; mcs < ARRAY_SIZE(p->stats.rx_per_mcs);
+			     mcs++)
+				seq_printf(s, " %lld",
+					   p->stats.rx_per_mcs[mcs]);
+			seq_puts(s, "\n");
 		}
 	}
 

drivers/net/wireless/ath/wil6210/main.c

@@ -100,6 +100,8 @@ module_param_cb(rx_ring_order, &ring_order_ops, &rx_ring_order, S_IRUGO);
 MODULE_PARM_DESC(rx_ring_order, " Rx ring order; size = 1 << order");
 module_param_cb(tx_ring_order, &ring_order_ops, &tx_ring_order, S_IRUGO);
 MODULE_PARM_DESC(tx_ring_order, " Tx ring order; size = 1 << order");
+module_param_cb(bcast_ring_order, &ring_order_ops, &bcast_ring_order, S_IRUGO);
+MODULE_PARM_DESC(bcast_ring_order, " Bcast ring order; size = 1 << order");
 
 #define RST_DELAY (20) /* msec, for loop in @wil_target_reset */
 #define RST_COUNT (1 + 1000/RST_DELAY) /* round up to be above 1 sec total */

drivers/net/wireless/ath/wil6210/netdev.c

@@ -132,7 +132,7 @@ static void wil_dev_setup(struct net_device *dev)
 	dev->tx_queue_len = WIL_TX_Q_LEN_DEFAULT;
 }
 
-void *wil_if_alloc(struct device *dev, void __iomem *csr)
+void *wil_if_alloc(struct device *dev)
 {
 	struct net_device *ndev;
 	struct wireless_dev *wdev;
@@ -147,7 +147,6 @@ void *wil_if_alloc(struct device *dev, void __iomem *csr)
 	}
 
 	wil = wdev_to_wil(wdev);
-	wil->csr = csr;
 	wil->wdev = wdev;
 
 	wil_dbg_misc(wil, "%s()\n", __func__);

drivers/net/wireless/ath/wil6210/pcie_bus.c

@@ -163,7 +163,6 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 {
 	struct wil6210_priv *wil;
 	struct device *dev = &pdev->dev;
-	void __iomem *csr;
 	int rc;
 
 	/* check HW */
@@ -178,9 +177,28 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		return -ENODEV;
 	}
 
+	wil = wil_if_alloc(dev);
+	if (IS_ERR(wil)) {
+		rc = (int)PTR_ERR(wil);
+		dev_err(dev, "wil_if_alloc failed: %d\n", rc);
+		return rc;
+	}
+	wil->pdev = pdev;
+	pci_set_drvdata(pdev, wil);
+	/* rollback to if_free */
+
+	wil->platform_handle =
+			wil_platform_init(&pdev->dev, &wil->platform_ops);
+	if (!wil->platform_handle) {
+		rc = -ENODEV;
+		wil_err(wil, "wil_platform_init failed\n");
+		goto if_free;
+	}
+	/* rollback to err_plat */
+
 	rc = pci_enable_device(pdev);
 	if (rc) {
-		dev_err(&pdev->dev,
+		wil_err(wil,
 			"pci_enable_device failed, retry with MSI only\n");
 		/* Work around for platforms that can't allocate IRQ:
 		 * retry with MSI only
@@ -188,47 +206,37 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 		pdev->msi_enabled = 1;
 		rc = pci_enable_device(pdev);
 	}
-	if (rc)
-		return -ENODEV;
+	if (rc) {
+		wil_err(wil,
+			"pci_enable_device failed, even with MSI only\n");
+		goto err_plat;
+	}
 	/* rollback to err_disable_pdev */
 
 	rc = pci_request_region(pdev, 0, WIL_NAME);
 	if (rc) {
-		dev_err(&pdev->dev, "pci_request_region failed\n");
+		wil_err(wil, "pci_request_region failed\n");
 		goto err_disable_pdev;
 	}
 	/* rollback to err_release_reg */
 
-	csr = pci_ioremap_bar(pdev, 0);
-	if (!csr) {
-		dev_err(&pdev->dev, "pci_ioremap_bar failed\n");
+	wil->csr = pci_ioremap_bar(pdev, 0);
+	if (!wil->csr) {
+		wil_err(wil, "pci_ioremap_bar failed\n");
 		rc = -ENODEV;
 		goto err_release_reg;
 	}
 	/* rollback to err_iounmap */
-	dev_info(&pdev->dev, "CSR at %pR -> 0x%p\n", &pdev->resource[0], csr);
+	wil_info(wil, "CSR at %pR -> 0x%p\n", &pdev->resource[0], wil->csr);
 
-	wil = wil_if_alloc(dev, csr);
-	if (IS_ERR(wil)) {
-		rc = (int)PTR_ERR(wil);
-		dev_err(dev, "wil_if_alloc failed: %d\n", rc);
-		goto err_iounmap;
-	}
-	/* rollback to if_free */
-
-	pci_set_drvdata(pdev, wil);
-	wil->pdev = pdev;
 	wil_set_capabilities(wil);
 	wil6210_clear_irq(wil);
 
-	wil->platform_handle =
-			wil_platform_init(&pdev->dev, &wil->platform_ops);
-
 	/* FW should raise IRQ when ready */
 	rc = wil_if_pcie_enable(wil);
 	if (rc) {
 		wil_err(wil, "Enable device failed\n");
-		goto if_free;
+		goto err_iounmap;
 	}
 	/* rollback to bus_disable */
 
@@ -243,18 +251,19 @@ static int wil_pcie_probe(struct pci_dev *pdev, const struct pci_device_id *id)
 
 	return 0;
 
- bus_disable:
+bus_disable:
 	wil_if_pcie_disable(wil);
- if_free:
+err_iounmap:
+	pci_iounmap(pdev, wil->csr);
+err_release_reg:
+	pci_release_region(pdev, 0);
+err_disable_pdev:
+	pci_disable_device(pdev);
+err_plat:
 	if (wil->platform_ops.uninit)
 		wil->platform_ops.uninit(wil->platform_handle);
+if_free:
 	wil_if_free(wil);
- err_iounmap:
-	pci_iounmap(pdev, csr);
- err_release_reg:
-	pci_release_region(pdev, 0);
- err_disable_pdev:
-	pci_disable_device(pdev);
 
 	return rc;
 }
@@ -269,12 +278,12 @@ static void wil_pcie_remove(struct pci_dev *pdev)
 	wil6210_debugfs_remove(wil);
 	wil_if_remove(wil);
 	wil_if_pcie_disable(wil);
-	if (wil->platform_ops.uninit)
-		wil->platform_ops.uninit(wil->platform_handle);
-	wil_if_free(wil);
 	pci_iounmap(pdev, csr);
 	pci_release_region(pdev, 0);
 	pci_disable_device(pdev);
+	if (wil->platform_ops.uninit)
+		wil->platform_ops.uninit(wil->platform_handle);
+	wil_if_free(wil);
 }
 
 static const struct pci_device_id wil6210_pcie_ids[] = {
@@ -291,7 +300,27 @@ static struct pci_driver wil6210_driver = {
 	.name		= WIL_NAME,
 };
 
-module_pci_driver(wil6210_driver);
+static int __init wil6210_driver_init(void)
+{
+	int rc;
+
+	rc = wil_platform_modinit();
+	if (rc)
+		return rc;
+
+	rc = pci_register_driver(&wil6210_driver);
+	if (rc)
+		wil_platform_modexit();
+	return rc;
+}
+module_init(wil6210_driver_init);
+
+static void __exit wil6210_driver_exit(void)
+{
+	pci_unregister_driver(&wil6210_driver);
+	wil_platform_modexit();
+}
+module_exit(wil6210_driver_exit);
 
 MODULE_LICENSE("Dual BSD/GPL");
 MODULE_AUTHOR("Qualcomm Atheros <wil6210@qca.qualcomm.com>");

drivers/net/wireless/ath/wil6210/txrx.c

@@ -427,6 +427,8 @@ static struct sk_buff *wil_vring_reap_rx(struct wil6210_priv *wil,
 	cid = wil_rxdesc_cid(d);
 	stats = &wil->sta[cid].stats;
 	stats->last_mcs_rx = wil_rxdesc_mcs(d);
+	if (stats->last_mcs_rx < ARRAY_SIZE(stats->rx_per_mcs))
+		stats->rx_per_mcs[stats->last_mcs_rx]++;
 
 	/* use radiotap header only if required */
 	if (ndev->type == ARPHRD_IEEE80211_RADIOTAP)

drivers/net/wireless/ath/wil6210/wil6210.h

@@ -281,7 +281,7 @@ struct fw_map {
 };
 
 /* array size should be in sync with actual definition in the wmi.c */
-extern const struct fw_map fw_mapping[7];
+extern const struct fw_map fw_mapping[8];
 
 /**
  * mk_cidxtid - construct @cidxtid field
@@ -464,6 +464,7 @@ enum wil_sta_status {
 };
 
 #define WIL_STA_TID_NUM (16)
+#define WIL_MCS_MAX (12) /* Maximum MCS supported */
 
 struct wil_net_stats {
 	unsigned long	rx_packets;
@@ -473,6 +474,7 @@ struct wil_net_stats {
 	unsigned long	tx_errors;
 	unsigned long	rx_dropped;
 	u16 last_mcs_rx;
+	u64 rx_per_mcs[WIL_MCS_MAX + 1];
 };
 
 /**
@@ -684,7 +686,7 @@ void wil_memcpy_fromio_32(void *dst, const volatile void __iomem *src,
 void wil_memcpy_toio_32(volatile void __iomem *dst, const void *src,
 			size_t count);
 
-void *wil_if_alloc(struct device *dev, void __iomem *csr);
+void *wil_if_alloc(struct device *dev);
 void wil_if_free(struct wil6210_priv *wil);
 int wil_if_add(struct wil6210_priv *wil);
 void wil_if_remove(struct wil6210_priv *wil);
@@ -762,7 +764,8 @@ struct wireless_dev *wil_cfg80211_init(struct device *dev);
 void wil_wdev_free(struct wil6210_priv *wil);
 
 int wmi_set_mac_address(struct wil6210_priv *wil, void *addr);
-int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan);
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
+		  u8 chan, u8 hidden_ssid);
 int wmi_pcp_stop(struct wil6210_priv *wil);
 void wil6210_disconnect(struct wil6210_priv *wil, const u8 *bssid,
 			u16 reason_code, bool from_event);

drivers/net/wireless/ath/wil6210/wil_platform.c

@@ -17,6 +17,15 @@
 #include "linux/device.h"
 #include "wil_platform.h"
 
+int __init wil_platform_modinit(void)
+{
+	return 0;
+}
+
+void wil_platform_modexit(void)
+{
+}
+
 /**
  * wil_platform_init() - wil6210 platform module init
  *
@@ -26,10 +35,11 @@
  */
 void *wil_platform_init(struct device *dev, struct wil_platform_ops *ops)
 {
-	void *handle = NULL;
+	void *handle = ops; /* to return some non-NULL for 'void' impl. */
 
 	if (!ops) {
-		dev_err(dev, "Invalid parameter. Cannot init platform module\n");
+		dev_err(dev,
+			"Invalid parameter. Cannot init platform module\n");
 		return NULL;
 	}
 

drivers/net/wireless/ath/wil6210/wil_platform.h

@@ -31,4 +31,7 @@ struct wil_platform_ops {
 
 void *wil_platform_init(struct device *dev, struct wil_platform_ops *ops);
 
+int __init wil_platform_modinit(void);
+void wil_platform_modexit(void);
+
 #endif /* __WIL_PLATFORM_H__ */

drivers/net/wireless/ath/wil6210/wmi.c

@@ -85,6 +85,7 @@ const struct fw_map fw_mapping[] = {
 	{0x880000, 0x88a000, 0x880000, "rgf"},     /* various RGF       40k */
 	{0x88a000, 0x88b000, 0x88a000, "AGC_tbl"}, /* AGC table          4k */
 	{0x88b000, 0x88c000, 0x88b000, "rgf_ext"}, /* Pcie_ext_rgf       4k */
+	{0x88c000, 0x88c200, 0x88c000, "mac_rgf_ext"}, /* mac_ext_rgf  512b */
 	{0x8c0000, 0x949000, 0x8c0000, "upper"},   /* upper area       548k */
 	/*
 	 * 920000..930000 ucode code RAM
@@ -824,7 +825,8 @@ int wmi_set_mac_address(struct wil6210_priv *wil, void *addr)
 	return wmi_send(wil, WMI_SET_MAC_ADDRESS_CMDID, &cmd, sizeof(cmd));
 }
 
-int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan)
+int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype,
+		  u8 chan, u8 hidden_ssid)
 {
 	int rc;
 
@@ -834,6 +836,7 @@ int wmi_pcp_start(struct wil6210_priv *wil, int bi, u8 wmi_nettype, u8 chan)
 		.disable_sec_offload = 1,
 		.channel = chan - 1,
 		.pcp_max_assoc_sta = max_assoc_sta,
+		.hidden_ssid = hidden_ssid,
 	};
 	struct {
 		struct wil6210_mbox_hdr_wmi wmi;

drivers/net/wireless/ath/wil6210/wmi.h

@@ -495,10 +495,18 @@ struct wmi_power_mgmt_cfg_cmd {
 /*
  * WMI_PCP_START_CMDID
  */
+
+enum wmi_hidden_ssid {
+	WMI_HIDDEN_SSID_DISABLED	= 0,
+	WMI_HIDDEN_SSID_SEND_EMPTY	= 1,
+	WMI_HIDDEN_SSID_CLEAR	= 2,
+};
+
 struct wmi_pcp_start_cmd {
 	__le16 bcon_interval;
 	u8 pcp_max_assoc_sta;
-	u8 reserved0[9];
+	u8 hidden_ssid;
+	u8 reserved0[8];
 	u8 network_type;
 	u8 channel;
 	u8 disable_sec_offload;