drm/i915: Use existing power well IDs where possible

There is no need for separate IDs for power wells on a new platform with
the same functionality as an other power well on a previous platform, we
can just reuse the ID from the previous platform. This is only possible
after the previous patches where we removed dependence on the actual
enum values.

This also fixes a problem on ICL where in assert_can_enable_dc5/9() we
would've failed to look up the PW#2 power well.

v2:
- Keep an ID assigned for the ICL PW#2 power well too. (Paulo)

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
[Added comment about the ICL PW#2 fix to the commit log]
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806095843.13294-10-imre.deak@intel.com

drivers/gpu/drm/i915/i915_reg.h

@@ -1045,9 +1045,6 @@ enum i915_power_well_id {
 	SKL_DISP_PW_MISC_IO,
 	SKL_DISP_PW_1,
 	SKL_DISP_PW_2,
-	BXT_DPIO_CMN_BC,
-	ICL_DISP_PW_1,
-	ICL_DISP_PW_2,
 };
 
 #define PUNIT_REG_PWRGT_CTRL			0x60

drivers/gpu/drm/i915/intel_runtime_pm.c

@@ -772,7 +772,7 @@ static void bxt_verify_ddi_phy_power_wells(struct drm_i915_private *dev_priv)
 	if (power_well->count > 0)
 		bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
 
-	power_well = lookup_power_well(dev_priv, BXT_DPIO_CMN_BC);
+	power_well = lookup_power_well(dev_priv, VLV_DISP_PW_DPIO_CMN_BC);
 	if (power_well->count > 0)
 		bxt_ddi_phy_verify_state(dev_priv, power_well->desc->bxt.phy);
 
@@ -2457,7 +2457,7 @@ static const struct i915_power_well_desc bxt_power_wells[] = {
 		.name = "dpio-common-bc",
 		.domains = BXT_DPIO_CMN_BC_POWER_DOMAINS,
 		.ops = &bxt_dpio_cmn_power_well_ops,
-		.id = BXT_DPIO_CMN_BC,
+		.id = VLV_DISP_PW_DPIO_CMN_BC,
 		{
 			.bxt.phy = DPIO_PHY0,
 		},
@@ -2516,7 +2516,7 @@ static const struct i915_power_well_desc glk_power_wells[] = {
 		.name = "dpio-common-b",
 		.domains = GLK_DPIO_CMN_B_POWER_DOMAINS,
 		.ops = &bxt_dpio_cmn_power_well_ops,
-		.id = BXT_DPIO_CMN_BC,
+		.id = VLV_DISP_PW_DPIO_CMN_BC,
 		{
 			.bxt.phy = DPIO_PHY0,
 		},
@@ -2765,7 +2765,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 		/* Handled by the DMC firmware */
 		.domains = 0,
 		.ops = &hsw_power_well_ops,
-		.id = ICL_DISP_PW_1,
+		.id = SKL_DISP_PW_1,
 		{
 			.hsw.regs = &hsw_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_PW_1,
@@ -2776,7 +2776,7 @@ static const struct i915_power_well_desc icl_power_wells[] = {
 		.name = "power well 2",
 		.domains = ICL_PW_2_POWER_DOMAINS,
 		.ops = &hsw_power_well_ops,
-		.id = ICL_DISP_PW_2,
+		.id = SKL_DISP_PW_2,
 		{
 			.hsw.regs = &hsw_power_well_regs,
 			.hsw.idx = ICL_PW_CTL_IDX_PW_2,
@@ -3576,7 +3576,7 @@ static void icl_display_core_init(struct drm_i915_private *dev_priv,
 	 *    The AUX IO power wells will be enabled on demand.
 	 */
 	mutex_lock(&power_domains->lock);
-	well = lookup_power_well(dev_priv, ICL_DISP_PW_1);
+	well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
 	intel_power_well_enable(dev_priv, well);
 	mutex_unlock(&power_domains->lock);
 
@@ -3613,7 +3613,7 @@ static void icl_display_core_uninit(struct drm_i915_private *dev_priv)
 	 *    disabled at this point.
 	 */
 	mutex_lock(&power_domains->lock);
-	well = lookup_power_well(dev_priv, ICL_DISP_PW_1);
+	well = lookup_power_well(dev_priv, SKL_DISP_PW_1);
 	intel_power_well_disable(dev_priv, well);
 	mutex_unlock(&power_domains->lock);