[ARM] Convert set_pte_ext implementions to macros

There are actually only four separate implementations of set_pte_ext.
Use assembler macros to insert code for these into the proc-*.S files.
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

arch/arm/mm/proc-arm1020.S

@@ -399,29 +399,7 @@ ENTRY(cpu_arm1020_switch_mm)
 	.align	5
 ENTRY(cpu_arm1020_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 4

arch/arm/mm/proc-arm1020e.S

@@ -383,29 +383,7 @@ ENTRY(cpu_arm1020e_switch_mm)
 	.align	5
 ENTRY(cpu_arm1020e_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry

arch/arm/mm/proc-arm1022.S

@@ -365,29 +365,7 @@ ENTRY(cpu_arm1022_switch_mm)
 	.align	5
 ENTRY(cpu_arm1022_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry

arch/arm/mm/proc-arm1026.S

@@ -354,29 +354,7 @@ ENTRY(cpu_arm1026_switch_mm)
 	.align	5
 ENTRY(cpu_arm1026_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r1, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_DISABLE
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry

arch/arm/mm/proc-arm6_7.S

@@ -20,6 +20,8 @@
 #include <asm/pgtable.h>
 #include <asm/ptrace.h>
 
+#include "proc-macros.S"
+
 ENTRY(cpu_arm6_dcache_clean_area)
 ENTRY(cpu_arm7_dcache_clean_area)
 		mov	pc, lr
@@ -214,30 +216,13 @@ ENTRY(cpu_arm7_switch_mm)
  *	   : r1 = value to set
  * Purpose : Set a PTE and flush it out of any WB cache
  */
-		.align	5
+	.align	5
 ENTRY(cpu_arm6_set_pte_ext)
 ENTRY(cpu_arm7_set_pte_ext)
 #ifdef CONFIG_MMU
-		str	r1, [r0], #-2048		@ linux version
-
-		eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-		bic	r2, r1, #PTE_SMALL_AP_MASK
-		bic	r2, r2, #PTE_TYPE_MASK
-		orr	r2, r2, #PTE_TYPE_SMALL
-
-		tst	r1, #L_PTE_USER			@ User?
-		orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-		tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-		orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-		tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young
-		movne	r2, #0
-
-		str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 #endif /* CONFIG_MMU */
-		mov	pc, lr
+	mov	pc, lr
 
 /*
  * Function: _arm6_7_reset

arch/arm/mm/proc-arm720.S

@@ -93,29 +93,12 @@ ENTRY(cpu_arm720_switch_mm)
  *	   : r1 = value to set
  * Purpose : Set a PTE and flush it out of any WB cache
  */
-		.align	5
+	.align	5
 ENTRY(cpu_arm720_set_pte_ext)
 #ifdef CONFIG_MMU
-		str	r1, [r0], #-2048		@ linux version
-
-		eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-		bic	r2, r1, #PTE_SMALL_AP_MASK
-		bic	r2, r2, #PTE_TYPE_MASK
-		orr	r2, r2, #PTE_TYPE_SMALL
-
-		tst	r1, #L_PTE_USER			@ User?
-		orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-		tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-		orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-		tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young
-		movne	r2, #0
-
-		str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 #endif
-		mov	pc, lr
+	mov	pc, lr
 
 /*
  * Function: arm720_reset

arch/arm/mm/proc-arm920.S

@@ -351,33 +351,11 @@ ENTRY(cpu_arm920_switch_mm)
 	.align	5
 ENTRY(cpu_arm920_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB
-#endif /* CONFIG_MMU */
+#endif
 	mov	pc, lr
 
 	__INIT

arch/arm/mm/proc-arm922.S

@@ -355,29 +355,7 @@ ENTRY(cpu_arm922_switch_mm)
 	.align	5
 ENTRY(cpu_arm922_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB

arch/arm/mm/proc-arm925.S

@@ -398,29 +398,7 @@ ENTRY(cpu_arm925_switch_mm)
 	.align	5
 ENTRY(cpu_arm925_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry

arch/arm/mm/proc-arm926.S

@@ -359,29 +359,7 @@ ENTRY(cpu_arm926_switch_mm)
 	.align	5
 ENTRY(cpu_arm926_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
-	eor	r3, r2, #0x0a			@ C & small page?
-	tst	r3, #0x0b
-	biceq	r2, r2, #4
-#endif
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext
 	mov	r0, r0
 #ifndef CONFIG_CPU_DCACHE_WRITETHROUGH
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry

arch/arm/mm/proc-feroceon.S

@@ -446,24 +446,7 @@ ENTRY(cpu_feroceon_switch_mm)
 	.align	5
 ENTRY(cpu_feroceon_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 #if defined(CONFIG_CACHE_FEROCEON_L2) && !defined(CONFIG_L2_CACHE_WRITETHROUGH)

arch/arm/mm/proc-macros.S

@@ -71,3 +71,147 @@
 	mov	\reg, #16			@ size offset
 	mov	\reg, \reg, lsl \tmp		@ actual cache line size
 	.endm
+
+
+/*
+ * Sanity check the PTE configuration for the code below - which makes
+ * certain assumptions about how these bits are layed out.
+ */
+#if L_PTE_SHARED != PTE_EXT_SHARED
+#error PTE shared bit mismatch
+#endif
+#if L_PTE_BUFFERABLE != PTE_BUFFERABLE
+#error PTE bufferable bit mismatch
+#endif
+#if L_PTE_CACHEABLE != PTE_CACHEABLE
+#error PTE cacheable bit mismatch
+#endif
+#if (L_PTE_EXEC+L_PTE_USER+L_PTE_WRITE+L_PTE_DIRTY+L_PTE_YOUNG+\
+     L_PTE_FILE+L_PTE_PRESENT) > L_PTE_SHARED
+#error Invalid Linux PTE bit settings
+#endif
+
+/*
+ * The ARMv6 and ARMv7 set_pte_ext translation function.
+ *
+ * Permission translation:
+ *  YUWD  APX AP1 AP0	SVC	User
+ *  0xxx   0   0   0	no acc	no acc
+ *  100x   1   0   1	r/o	no acc
+ *  10x0   1   0   1	r/o	no acc
+ *  1011   0   0   1	r/w	no acc
+ *  110x   0   1   0	r/w	r/o
+ *  11x0   0   1   0	r/w	r/o
+ *  1111   0   1   1	r/w	r/w
+ */
+	.macro	armv6_set_pte_ext
+	str	r1, [r0], #-2048		@ linux version
+
+	bic	r3, r1, #0x000003f0
+	bic	r3, r3, #PTE_TYPE_MASK
+	orr	r3, r3, r2
+	orr	r3, r3, #PTE_EXT_AP0 | 2
+
+	tst	r1, #L_PTE_WRITE
+	tstne	r1, #L_PTE_DIRTY
+	orreq	r3, r3, #PTE_EXT_APX
+
+	tst	r1, #L_PTE_USER
+	orrne	r3, r3, #PTE_EXT_AP1
+	tstne	r3, #PTE_EXT_APX
+	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
+
+	tst	r1, #L_PTE_EXEC
+	orreq	r3, r3, #PTE_EXT_XN
+
+	tst	r1, #L_PTE_YOUNG
+	tstne	r1, #L_PTE_PRESENT
+	moveq	r3, #0
+
+	str	r3, [r0]
+	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
+	.endm
+
+
+/*
+ * The ARMv3, ARMv4 and ARMv5 set_pte_ext translation function,
+ * covering most CPUs except Xscale and Xscale 3.
+ *
+ * Permission translation:
+ *  YUWD   AP	SVC	User
+ *  0xxx  0x00	no acc	no acc
+ *  100x  0x00	r/o	no acc
+ *  10x0  0x00	r/o	no acc
+ *  1011  0x55	r/w	no acc
+ *  110x  0xaa	r/w	r/o
+ *  11x0  0xaa	r/w	r/o
+ *  1111  0xff	r/w	r/w
+ */
+	.macro	armv3_set_pte_ext wc_disable=1
+	str	r1, [r0], #-2048		@ linux version
+
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
+	bic	r2, r2, #PTE_TYPE_MASK
+	orr	r2, r2, #PTE_TYPE_SMALL
+
+	tst	r3, #L_PTE_USER			@ user?
+	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
+
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
+	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
+
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
+	movne	r2, #0
+
+	.if	\wc_disable
+#ifdef CONFIG_CPU_DCACHE_WRITETHROUGH
+	tst	r2, #PTE_CACHEABLE
+	bicne	r2, r2, #PTE_BUFFERABLE
+#endif
+	.endif
+	str	r2, [r0]			@ hardware version
+	.endm
+
+
+/*
+ * Xscale set_pte_ext translation, split into two halves to cope
+ * with work-arounds.  r3 must be preserved by code between these
+ * two macros.
+ *
+ * Permission translation:
+ *  YUWD  AP	SVC	User
+ *  0xxx  00	no acc	no acc
+ *  100x  00	r/o	no acc
+ *  10x0  00	r/o	no acc
+ *  1011  01	r/w	no acc
+ *  110x  10	r/w	r/o
+ *  11x0  10	r/w	r/o
+ *  1111  11	r/w	r/w
+ */
+	.macro	xscale_set_pte_ext_prologue
+	str	r1, [r0], #-2048		@ linux version
+
+	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
+
+	bic	r2, r1, #PTE_SMALL_AP_MASK	@ keep C, B bits
+	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
+
+	tst	r3, #L_PTE_USER			@ user?
+	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
+
+	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
+	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
+						@ combined with user -> user r/w
+	.endm
+
+	.macro	xscale_set_pte_ext_epilogue
+	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
+	movne	r2, #0				@ no -> fault
+
+	str	r2, [r0]			@ hardware version
+	mov	ip, #0
+	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
+	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	.endm

arch/arm/mm/proc-sa110.S

@@ -153,24 +153,7 @@ ENTRY(cpu_sa110_switch_mm)
 	.align	5
 ENTRY(cpu_sa110_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB

arch/arm/mm/proc-sa1100.S

@@ -166,24 +166,7 @@ ENTRY(cpu_sa1100_switch_mm)
 	.align	5
 ENTRY(cpu_sa1100_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	eor	r1, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	bic	r2, r1, #PTE_SMALL_AP_MASK
-	bic	r2, r2, #PTE_TYPE_MASK
-	orr	r2, r2, #PTE_TYPE_SMALL
-
-	tst	r1, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_SMALL_AP_URO_SRW
-
-	tst	r1, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_SMALL_AP_UNO_SRW
-
-	tst	r1, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0
-
-	str	r2, [r0]			@ hardware version
+	armv3_set_pte_ext wc_disable=0
 	mov	r0, r0
 	mcr	p15, 0, r0, c7, c10, 1		@ clean D entry
 	mcr	p15, 0, r0, c7, c10, 4		@ drain WB

arch/arm/mm/proc-v6.S

@@ -114,46 +114,10 @@ ENTRY(cpu_v6_switch_mm)
  *		  (hardware version is stored at -1024 bytes)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
- *
- *	Permissions:
- *	  YUWD  APX AP1 AP0	SVC	User
- *	  0xxx   0   0   0	no acc	no acc
- *	  100x   1   0   1	r/o	no acc
- *	  10x0   1   0   1	r/o	no acc
- *	  1011   0   0   1	r/w	no acc
- *	  110x   0   1   0	r/w	r/o
- *	  11x0   0   1   0	r/w	r/o
- *	  1111   0   1   1	r/w	r/w
  */
 ENTRY(cpu_v6_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	bic	r3, r1, #0x000003f0
-	bic	r3, r3, #0x00000003
-	orr	r3, r3, r2
-	orr	r3, r3, #PTE_EXT_AP0 | 2
-
-	tst	r1, #L_PTE_WRITE
-	tstne	r1, #L_PTE_DIRTY
-	orreq	r3, r3, #PTE_EXT_APX
-
-	tst	r1, #L_PTE_USER
-	orrne	r3, r3, #PTE_EXT_AP1
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-
-	tst	r1, #L_PTE_YOUNG
-	biceq	r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
-
-	tst	r1, #L_PTE_EXEC
-	orreq	r3, r3, #PTE_EXT_XN
-
-	tst	r1, #L_PTE_PRESENT
-	moveq	r3, #0
-
-	str	r3, [r0]
-	mcr	p15, 0, r0, c7, c10, 1 @ flush_pte
+	armv6_set_pte_ext
 #endif
 	mov	pc, lr
 

arch/arm/mm/proc-v7.S

@@ -99,46 +99,10 @@ ENTRY(cpu_v7_switch_mm)
  *		  (hardware version is stored at -1024 bytes)
  *	- pte   - PTE value to store
  *	- ext	- value for extended PTE bits
- *
- *	Permissions:
- *	  YUWD  APX AP1 AP0	SVC	User
- *	  0xxx   0   0   0	no acc	no acc
- *	  100x   1   0   1	r/o	no acc
- *	  10x0   1   0   1	r/o	no acc
- *	  1011   0   0   1	r/w	no acc
- *	  110x   0   1   0	r/w	r/o
- *	  11x0   0   1   0	r/w	r/o
- *	  1111   0   1   1	r/w	r/w
  */
 ENTRY(cpu_v7_set_pte_ext)
 #ifdef CONFIG_MMU
-	str	r1, [r0], #-2048		@ linux version
-
-	bic	r3, r1, #0x000003f0
-	bic	r3, r3, #0x00000003
-	orr	r3, r3, r2
-	orr	r3, r3, #PTE_EXT_AP0 | 2
-
-	tst	r1, #L_PTE_WRITE
-	tstne	r1, #L_PTE_DIRTY
-	orreq	r3, r3, #PTE_EXT_APX
-
-	tst	r1, #L_PTE_USER
-	orrne	r3, r3, #PTE_EXT_AP1
-	tstne	r3, #PTE_EXT_APX
-	bicne	r3, r3, #PTE_EXT_APX | PTE_EXT_AP0
-
-	tst	r1, #L_PTE_YOUNG
-	biceq	r3, r3, #PTE_EXT_APX | PTE_EXT_AP_MASK
-
-	tst	r1, #L_PTE_EXEC
-	orreq	r3, r3, #PTE_EXT_XN
-
-	tst	r1, #L_PTE_PRESENT
-	moveq	r3, #0
-
-	str	r3, [r0]
-	mcr	p15, 0, r0, c7, c10, 1		@ flush_pte
+	armv6_set_pte_ext
 #endif
 	mov	pc, lr
 

arch/arm/mm/proc-xsc3.S

@@ -349,34 +349,16 @@ ENTRY(cpu_xsc3_switch_mm)
  */
 	.align	5
 ENTRY(cpu_xsc3_set_pte_ext)
-	str	r1, [r0], #-2048		@ linux version
-
-	bic	r2, r1, #0xff0			@ keep C, B bits
-	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
-	tst	r1, #L_PTE_SHARED		@ shared?
-	orrne	r2, r2, #0x200
-
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	tst	r3, #L_PTE_USER			@ user?
-	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
-
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ write and dirty?
-	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
-						@ combined with user -> user r/w
+	xscale_set_pte_ext_prologue
 
 	@ If it's cacheable, it needs to be in L2 also.
-	eor	ip, r1, #L_PTE_CACHEABLE
-	tst	ip, #L_PTE_CACHEABLE
-	orreq	r2, r2, #PTE_EXT_TEX(0x5)
+	tst	r1, #L_PTE_CACHEABLE
+	orrne	r2, r2, #PTE_EXT_TEX(0x5)
 
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ present and young?
-	movne	r2, #0				@ no -> fault
+	tst	r1, #L_PTE_SHARED		@ shared?
+	orrne	r2, r2, #0x200
 
-	str	r2, [r0]			@ hardware version
-	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ clean L1 D line
-	mcr	p15, 0, ip, c7, c10, 4		@ data write barrier
+	xscale_set_pte_ext_epilogue
 	mov	pc, lr
 
 	.ltorg

arch/arm/mm/proc-xscale.S

@@ -433,20 +433,7 @@ ENTRY(cpu_xscale_switch_mm)
  */
 	.align	5
 ENTRY(cpu_xscale_set_pte_ext)
-	str	r1, [r0], #-2048		@ linux version
-
-	bic	r2, r1, #0xff0
-	orr	r2, r2, #PTE_TYPE_EXT		@ extended page
-
-	eor	r3, r1, #L_PTE_PRESENT | L_PTE_YOUNG | L_PTE_WRITE | L_PTE_DIRTY
-
-	tst	r3, #L_PTE_USER			@ User?
-	orrne	r2, r2, #PTE_EXT_AP_URO_SRW	@ yes -> user r/o, system r/w
-
-	tst	r3, #L_PTE_WRITE | L_PTE_DIRTY	@ Write and Dirty?
-	orreq	r2, r2, #PTE_EXT_AP_UNO_SRW	@ yes -> user n/a, system r/w
-						@ combined with user -> user r/w
-
+	xscale_set_pte_ext_prologue
 	@
 	@ Handle the X bit.  We want to set this bit for the minicache
 	@ (U = E = B = W = 0, C = 1) or when write allocate is enabled,
@@ -456,11 +443,10 @@ ENTRY(cpu_xscale_set_pte_ext)
 	@
 	@  X = (C & ~W & ~B) | (C & W & B & write_allocate)
 	@
-	eor	ip, r1, #L_PTE_CACHEABLE
-	tst	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+	and	ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+	teq	ip, #L_PTE_CACHEABLE
 #if PTE_CACHE_WRITE_ALLOCATE
-	eorne	ip, r1, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
-	tstne	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
+	teqne	ip, #L_PTE_CACHEABLE | L_PTE_WRITE | L_PTE_BUFFERABLE
 #endif
 	orreq	r2, r2, #PTE_EXT_TEX(1)
 
@@ -474,13 +460,7 @@ ENTRY(cpu_xscale_set_pte_ext)
 	teq	ip, #L_PTE_USER | L_PTE_CACHEABLE
 	biceq	r2, r2, #PTE_BUFFERABLE
 
-	tst	r3, #L_PTE_PRESENT | L_PTE_YOUNG	@ Present and Young?
-	movne	r2, #0				@ no -> fault
-
-	str	r2, [r0]			@ hardware version
-	mov	ip, #0
-	mcr	p15, 0, r0, c7, c10, 1		@ Clean D cache line
-	mcr	p15, 0, ip, c7, c10, 4		@ Drain Write (& Fill) Buffer
+	xscale_set_pte_ext_epilogue
 	mov	pc, lr