i2c: xgene-slimpro: Support v2

This patch supports xgene-slimpro-i2c v2 which uses the non-cachable memory
as the PCC shared memory.
Signed-off-by: Hoan Tran <hotran@apm.com>
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Wolfram Sang <wsa@the-dreams.de>

drivers/i2c/busses/i2c-xgene-slimpro.c

@@ -129,6 +129,11 @@ struct slimpro_i2c_dev {
 #define to_slimpro_i2c_dev(cl)	\
 		container_of(cl, struct slimpro_i2c_dev, mbox_client)
 
+enum slimpro_i2c_version {
+	XGENE_SLIMPRO_I2C_V1 = 0,
+	XGENE_SLIMPRO_I2C_V2 = 1,
+};
+
 /*
  * This function tests and clears a bitmask then returns its old value
  */
@@ -476,6 +481,15 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 		}
 	} else {
 		struct acpi_pcct_hw_reduced *cppc_ss;
+		const struct acpi_device_id *acpi_id;
+		int version = XGENE_SLIMPRO_I2C_V1;
+
+		acpi_id = acpi_match_device(pdev->dev.driver->acpi_match_table,
+					    &pdev->dev);
+		if (!acpi_id)
+			return -EINVAL;
+
+		version = (int)acpi_id->driver_data;
 
 		if (device_property_read_u32(&pdev->dev, "pcc-channel",
 					     &ctx->mbox_idx))
@@ -514,9 +528,16 @@ static int xgene_slimpro_i2c_probe(struct platform_device *pdev)
 		 */
 		ctx->comm_base_addr = cppc_ss->base_address;
 		if (ctx->comm_base_addr) {
-			ctx->pcc_comm_addr = memremap(ctx->comm_base_addr,
-						      cppc_ss->length,
-						      MEMREMAP_WB);
+			if (version == XGENE_SLIMPRO_I2C_V2)
+				ctx->pcc_comm_addr = memremap(
+							ctx->comm_base_addr,
+							cppc_ss->length,
+							MEMREMAP_WT);
+			else
+				ctx->pcc_comm_addr = memremap(
+							ctx->comm_base_addr,
+							cppc_ss->length,
+							MEMREMAP_WB);
 		} else {
 			dev_err(&pdev->dev, "Failed to get PCC comm region\n");
 			rc = -ENOENT;
@@ -581,7 +602,8 @@ MODULE_DEVICE_TABLE(of, xgene_slimpro_i2c_dt_ids);
 
 #ifdef CONFIG_ACPI
 static const struct acpi_device_id xgene_slimpro_i2c_acpi_ids[] = {
-	{"APMC0D40", 0},
+	{"APMC0D40", XGENE_SLIMPRO_I2C_V1},
+	{"APMC0D8B", XGENE_SLIMPRO_I2C_V2},
 	{}
 };
 MODULE_DEVICE_TABLE(acpi, xgene_slimpro_i2c_acpi_ids);