Skip to content

L
linux
Commit da7920e3 authored by Arnd Bergmann's avatar Arnd Bergmann
Browse files
Options

Merge tag 'imx-dt-4.15' of... 

Merge tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux into next/dt

Pull "i.MX device tree updates for 4.15" from Shawn Guo:

 - New board support: i.MX51 ZII RDU1, i.MX53 GE Healthcare PPD, i.MX6
   TX modules for MB7 from  Ka-Ro Electronics, i.MX6 Wandboard revd1
   variants, i.MX6 LWN DISPLAY5 board, Pistachio i.MX6Q board, i.MX6SX
   Vining-2000 board.
 - Use the 'vpcie-supply' property for PCIe device for boards
   imx6qdl-sabresd, imx6q-novena and imx6q-cm-fx6.
 - A series from Jagan Teki to update imx6qdl-icore board with audio,
   touch and CAN support.
 - Switch to nvmem for accessing OCOTP from tempmon for i.MX6SX and add
   tempmon support for i.MX6UL.
 - A bunch of patches from Lothar Waßmann updating Ka-Ro i.MX28, i.MX53
   and i.MX6 TX modules.
 - Fix DTC warnings in i.MX device trees, dropping leading zeros from
   unit address, correcting display nodes notation and display port
   names, fixing nodes with unit name and no reg property.
 - Other random device updates for various board support.

* tag 'imx-dt-4.15' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (63 commits)
  ARM: dts: imx53-tx53: fix interrupt flags
  ARM: dts: imx28-tx28: fix interrupt flags
  ARM: dts: display5: Device tree description of LWN's DISPLAY5 board
  ARM: dts: imx53-qsb-common: Fix 'led_gpio7_7@0' node with unit name and no reg property
  ARM: dts: imx53-m53evk: Fix 'led_gpio@0' node with unit name and no reg property
  ARM: dts: imx53: Fix 'usbphy@x' node with unit name and no reg property
  ARM: dts: imx51-ts4800: Fix 'port@0' node with unit name and no reg property
  ARM: dts: imx51-apf51dev: Fix 'backlight@bl1' node with unit name and no reg property
  ARM: dts: imx: add ZII RDU1 board
  ARM: dts: imx: add support for TX6 modules on MB7 baseboard
  ARM: dts: imx: add support for TX6QP
  ARM: dts: imx6-tx6: add a .dtsi file for the MB7 baseboard
  ARM: dts: imx6-tx6: move display configuration to .dtsi file
  ARM: dts: imx6-tx6: add support for I2C bus recovery
  ARM: dts: imx6-tx6: convert to using simple-audio-card
  ARM: dts: imx6-tx6: specify ethernet phy reset post-delay
  ARM: dts: imx6-tx6: improve ethernet related pinctrl setup
  ARM: dts: imx6-tx6: add trickle-charge config for DS1339
  ARM: dts: imx6-tx6: remove obsolete ipu1 alias
  ARM: dts: imx6-tx6: remove obsolete eeti,egalax_ts
  ...

[arnd: made sure we have no new leading zeroes in unit address during merge]
parents 0292f8a8 27e1acb7
Expand all Hide whitespace changes
Inline Side-by-side
Showing with 7094 additions and 3351 deletions
Documentation/devicetree/bindings/misc/ge-achc.txt 0 → 100644
View file @ da7920e3
* GE Healthcare USB Management Controller
A device which handles data aquisition from compatible USB based peripherals.
SPI is used for device management.
Note: This device does not expose the peripherals as USB devices.
Required properties:
- compatible : Should be "ge,achc"
Required SPI properties:
- reg : Should be address of the device chip select within
the controller.
- spi-max-frequency : Maximum SPI clocking speed of device in Hz, should be
1MHz for the GE ACHC.
Example:
spidev0: spi@0 {
compatible = "ge,achc";
reg = <0>;
spi-max-frequency = <1000000>;
};
arch/arm/boot/dts/Makefile
View file @ da7920e3
......@@ -348,12 +348,14 @@ dtb-$(CONFIG_SOC_IMX51) += \
imx51-babbage.dtb \
imx51-digi-connectcore-jsk.dtb \
imx51-eukrea-mbimxsd51-baseboard.dtb \
imx51-ts4800.dtb
imx51-ts4800.dtb \
imx51-zii-rdu1.dtb
dtb-$(CONFIG_SOC_IMX53) += \
imx53-ard.dtb \
imx53-cx9020.dtb \
imx53-m53evk.dtb \
imx53-mba53.dtb \
imx53-ppd.dtb \
imx53-qsb.dtb \
imx53-qsrb.dtb \
imx53-smd.dtb \
......@@ -395,14 +397,19 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6dl-ts4900.dtb \
imx6dl-tx6dl-comtft.dtb \
imx6dl-tx6s-8034.dtb \
imx6dl-tx6s-8034-mb7.dtb \
imx6dl-tx6s-8035.dtb \
imx6dl-tx6s-8035-mb7.dtb \
imx6dl-tx6u-801x.dtb \
imx6dl-tx6u-80xx-mb7.dtb \
imx6dl-tx6u-8033.dtb \
imx6dl-tx6u-8033-mb7.dtb \
imx6dl-tx6u-811x.dtb \
imx6dl-tx6u-81xx-mb7.dtb \
imx6dl-udoo.dtb \
imx6dl-wandboard.dtb \
imx6dl-wandboard-revb1.dtb \
imx6dl-wandboard-revd1.dtb \
imx6q-apalis-eval.dtb \
imx6q-apalis-ixora.dtb \
imx6q-apalis-ixora-v1.1.dtb \
......@@ -414,6 +421,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-cm-fx6.dtb \
imx6q-cubox-i.dtb \
imx6q-dfi-fs700-m60.dtb \
imx6q-display5-tianma-tm070-1280x768.dtb \
imx6q-dmo-edmqmx6.dtb \
imx6q-evi.dtb \
imx6q-gk802.dtb \
......@@ -441,6 +449,7 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-nitrogen6_som2.dtb \
imx6q-novena.dtb \
imx6q-phytec-pbab01.dtb \
imx6q-pistachio.dtb \
imx6q-rex-pro.dtb \
imx6q-sabreauto.dtb \
imx6q-sabrelite.dtb \
......@@ -454,17 +463,25 @@ dtb-$(CONFIG_SOC_IMX6Q) += \
imx6q-tx6q-1020.dtb \
imx6q-tx6q-1020-comtft.dtb \
imx6q-tx6q-1036.dtb \
imx6q-tx6q-1036-mb7.dtb \
imx6q-tx6q-10x0-mb7.dtb \
imx6q-tx6q-1110.dtb \
imx6q-tx6q-11x0-mb7.dtb \
imx6q-udoo.dtb \
imx6q-utilite-pro.dtb \
imx6q-wandboard.dtb \
imx6q-wandboard-revb1.dtb \
imx6q-wandboard-revd1.dtb \
imx6q-zii-rdu2.dtb \
imx6qp-nitrogen6_max.dtb \
imx6qp-nitrogen6_som2.dtb \
imx6qp-sabreauto.dtb \
imx6qp-sabresd.dtb \
imx6qp-tx6qp-8037.dtb \
imx6qp-tx6qp-8037-mb7.dtb \
imx6qp-tx6qp-8137.dtb \
imx6qp-tx6qp-8137-mb7.dtb \
imx6qp-wandboard-revd1.dtb \
imx6qp-zii-rdu2.dtb
dtb-$(CONFIG_SOC_IMX6SL) += \
imx6sl-evk.dtb \
......@@ -475,6 +492,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
imx6sx-sdb-reva.dtb \
imx6sx-sdb-sai.dtb \
imx6sx-sdb.dtb \
imx6sx-softing-vining-2000.dtb \
imx6sx-udoo-neo-basic.dtb \
imx6sx-udoo-neo-extended.dtb \
imx6sx-udoo-neo-full.dtb
......
arch/arm/boot/dts/imx25-eukrea-mbimxsd25-baseboard.dts
View file @ da7920e3
......@@ -64,7 +64,7 @@ &audmux {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio1 20>;
cd-gpios = <&gpio1 20 GPIO_ACTIVE_LOW>;
status = "okay";
};
......
arch/arm/boot/dts/imx25-pdk.dts
View file @ da7920e3
......@@ -295,6 +295,14 @@ &ssi1 {
status = "okay";
};
&tsc {
status = "okay";
};
&tscadc {
status = "okay";
};
&uart1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_uart1>;
......
arch/arm/boot/dts/imx28-tx28.dts
View file @ da7920e3
/*
* Copyright 2012 Shawn Guo <shawn.guo@linaro.org>
* Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -45,82 +75,69 @@ onewire {
status = "disabled";
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_usb0_vbus: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb0_vbus: regulator-usb0-vbus {
compatible = "regulator-fixed";
regulator-name = "usb0_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio0 18 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb1_vbus: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usb1_vbus: regulator-usb1-vbus {
compatible = "regulator-fixed";
regulator-name = "usb1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
gpio = <&gpio3 27 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_2p5v: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_2p5v: regulator-2p5v {
compatible = "regulator-fixed";
regulator-name = "2P5V";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
regulator-always-on;
};
reg_3p3v: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_3p3v: regulator-3p3v {
compatible = "regulator-fixed";
regulator-name = "3P3V";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
regulator-always-on;
};
reg_can_xcvr: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
};
reg_can_xcvr: regulator-can-xcvr {
compatible = "regulator-fixed";
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 0 GPIO_ACTIVE_HIGH>;
pinctrl-names = "default";
pinctrl-0 = <&tx28_flexcan_xcvr_pins>;
};
reg_lcd: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd: regulator-lcd-power {
compatible = "regulator-fixed";
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio1 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_lcd_reset: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
startup-delay-us = <300000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
};
reg_lcd_reset: regulator-lcd-reset {
compatible = "regulator-fixed";
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 30 GPIO_ACTIVE_HIGH>;
startup-delay-us = <300000>;
enable-active-high;
regulator-always-on;
regulator-boot-on;
};
clocks {
......@@ -312,7 +329,7 @@ gpio5: pca953x@20 {
pinctrl-names = "default";
pinctrl-0 = <&tx28_pca9554_pins>;
interrupt-parent = <&gpio3>;
interrupts = <28 0>;
interrupts = <28 IRQ_TYPE_NONE>;
gpio-controller;
#gpio-cells = <2>;
interrupt-controller;
......@@ -336,7 +353,7 @@ touchscreen: tsc2007@48 {
pinctrl-names = "default";
pinctrl-0 = <&tx28_tsc2007_pins>;
interrupt-parent = <&gpio3>;
interrupts = <20 0>;
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
pendown-gpio = <&gpio3 20 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = /bits/ 16 <660>;
};
......@@ -344,6 +361,8 @@ touchscreen: tsc2007@48 {
ds1339: rtc@68 {
compatible = "mxim,ds1339";
reg = <0x68>;
trickle-resistor-ohms = <250>;
trickle-diode-disable;
};
};
......
arch/arm/boot/dts/imx35-eukrea-mbimxsd35-baseboard.dts
View file @ da7920e3
......@@ -65,7 +65,7 @@ &audmux {
&esdhc1 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_esdhc1>;
cd-gpios = <&gpio3 24>;
cd-gpios = <&gpio3 24 GPIO_ACTIVE_LOW>;
status = "okay";
};
......
arch/arm/boot/dts/imx50.dtsi
View file @ da7920e3
......@@ -443,6 +443,7 @@ sdma: sdma@63fb0000 {
clocks = <&clks IMX5_CLK_SDMA_GATE>,
<&clks IMX5_CLK_SDMA_GATE>;
clock-names = "ipg", "ahb";
#dma-cells = <3>;
fsl,sdma-ram-script-name = "imx/sdma/sdma-imx50.bin";
};
......
arch/arm/boot/dts/imx51-apf51dev.dts
View file @ da7920e3
......@@ -16,7 +16,7 @@ / {
model = "Armadeus Systems APF51Dev docking/development board";
compatible = "armadeus,imx51-apf51dev", "armadeus,imx51-apf51", "fsl,imx51";
backlight@bl1{
backlight {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_backlight>;
compatible = "gpio-backlight";
......@@ -24,7 +24,7 @@ backlight@bl1{
default-on;
};
display@di1 {
disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
......@@ -51,7 +51,7 @@ lw700 {
port {
display_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
remote-endpoint = <&ipu_di0_disp1>;
};
};
};
......@@ -120,7 +120,7 @@ &iomuxc {
pinctrl-0 = <&pinctrl_hog>;
imx51-apf51dev {
pinctrl_backlight: bl1grp {
pinctrl_backlight: backlightgrp {
fsl,pins = <
MX51_PAD_DI1_D1_CS__GPIO3_4 0x1F5
>;
......@@ -218,6 +218,6 @@ MX51_PAD_DI1_PIN3__DI1_PIN3 0x5
};
};
&ipu_di0_disp0 {
&ipu_di0_disp1 {
remote-endpoint = <&display_in>;
};
arch/arm/boot/dts/imx51-babbage.dts
View file @ da7920e3
......@@ -39,7 +39,7 @@ clk_26M: codec_clock {
};
};
display0: display@di0 {
display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
......@@ -61,12 +61,12 @@ timing0: dvi {
port {
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
remote-endpoint = <&ipu_di0_disp1>;
};
};
};
display1: display@di1 {
display2: disp2 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
......@@ -93,7 +93,7 @@ timing1: claawvga {
port {
display1_in: endpoint {
remote-endpoint = <&ipu_di1_disp1>;
remote-endpoint = <&ipu_di1_disp2>;
};
};
};
......@@ -348,11 +348,11 @@ sgtl5000: codec@a {
};
};
&ipu_di0_disp0 {
&ipu_di0_disp1 {
remote-endpoint = <&display0_in>;
};
&ipu_di1_disp1 {
&ipu_di1_disp2 {
remote-endpoint = <&display1_in>;
};
......
arch/arm/boot/dts/imx51-ts4800.dts
View file @ da7920e3
......@@ -50,7 +50,7 @@ backlight: backlight {
power-supply = <&backlight_reg>;
};
display0: display@di0 {
display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
......@@ -71,9 +71,9 @@ display-timings {
};
};
port@0 {
port {
display0_in: endpoint {
remote-endpoint = <&ipu_di0_disp0>;
remote-endpoint = <&ipu_di0_disp1>;
};
};
};
......@@ -107,7 +107,7 @@ rtc: m41t00@68 {
};
};
&ipu_di0_disp0 {
&ipu_di0_disp1 {
remote-endpoint = <&display0_in>;
};
......
arch/arm/boot/dts/imx51-zii-rdu1.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx51.dtsi
View file @ da7920e3
......@@ -148,14 +148,14 @@ ipu: ipu@40000000 {
ipu_di0: port@2 {
reg = <2>;
ipu_di0_disp0: endpoint {
ipu_di0_disp1: endpoint {
};
};
ipu_di1: port@3 {
reg = <3>;
ipu_di1_disp1: endpoint {
ipu_di1_disp2: endpoint {
};
};
};
......
arch/arm/boot/dts/imx53-m53evk.dts
View file @ da7920e3
......@@ -16,7 +16,7 @@ / {
model = "Aries/DENX M53EVK";
compatible = "aries,imx53-m53evk", "denx,imx53-m53evk", "fsl,imx53";
display1: display@di1 {
display1: disp1 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "bgr666";
pinctrl-names = "default";
......@@ -183,7 +183,7 @@ MX53_PAD_GPIO_4__GPIO1_4 0x000b0
>;
};
led_pin_gpio: led_gpio@0 {
led_pin_gpio: led_gpio {
fsl,pins = <
MX53_PAD_PATA_DATA8__GPIO2_8 0x80000000
MX53_PAD_PATA_DATA9__GPIO2_9 0x80000000
......
arch/arm/boot/dts/imx53-mba53.dts
View file @ da7920e3
......@@ -30,7 +30,7 @@ backlight {
power-supply = <&reg_backlight>;
};
disp1: display@disp1 {
disp1: disp1 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp1_1>;
......
arch/arm/boot/dts/imx53-ppd.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx53-qsb-common.dtsi
View file @ da7920e3
......@@ -22,7 +22,7 @@ memory {
<0xb0000000 0x20000000>;
};
display0: display@di0 {
display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb565";
pinctrl-names = "default";
......@@ -172,7 +172,7 @@ MX53_PAD_GPIO_16__GPIO7_11 0x80000000
>;
};
led_pin_gpio7_7: led_gpio7_7@0 {
led_pin_gpio7_7: led_gpio7_7 {
fsl,pins = <
MX53_PAD_PATA_DA_1__GPIO7_7 0x80000000
>;
......
arch/arm/boot/dts/imx53-tx53-x03x.dts
View file @ da7920e3
/*
* Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
......@@ -24,7 +54,7 @@ aliases {
};
soc {
display: display@di0 {
display: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
......@@ -173,28 +203,24 @@ backlight: backlight {
default-brightness-level = <50>;
};
regulators {
reg_lcd_pwr: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
reg_lcd_pwr: regulator-lcd-pwr {
compatible = "regulator-fixed";
regulator-name = "LCD POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
reg_lcd_reset: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
reg_lcd_reset: regulator-lcd-reset {
compatible = "regulator-fixed";
regulator-name = "LCD RESET";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
......@@ -228,7 +254,7 @@ touchscreen: tsc2007@48 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_tsc2007>;
interrupt-parent = <&gpio3>;
interrupts = <26 0>;
interrupts = <26 IRQ_TYPE_EDGE_FALLING>;
gpios = <&gpio3 26 GPIO_ACTIVE_LOW>;
ti,x-plate-ohms = <660>;
wakeup-source;
......
arch/arm/boot/dts/imx53-tx53-x13x.dts
View file @ da7920e3
/*
* Copyright 2013 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2013-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
......@@ -63,51 +99,33 @@ backlight1: backlight1 {
default-brightness-level = <50>;
};
regulators {
reg_lcd_pwr0: regulator@5 {
compatible = "regulator-fixed";
reg = <5>;
regulator-name = "LVDS0 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
reg_lcd_pwr1: regulator@6 {
compatible = "regulator-fixed";
reg = <6>;
regulator-name = "LVDS1 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
reg_lcd_pwr0: regulator-lvds0-pwr {
compatible = "regulator-fixed";
regulator-name = "LVDS0 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio3 29 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
&i2c2 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_i2c2>;
status = "okay";
touchscreen2: eeti@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti2>;
interrupt-parent = <&gpio3>;
interrupts = <23 0>;
wakeup-gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
wakeup-source;
reg_lcd_pwr1: regulator-lvds1-pwr {
compatible = "regulator-fixed";
regulator-name = "LVDS1 POWER";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-boot-on;
};
};
&i2c3 {
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c3>;
pinctrl-1 = <&pinctrl_i2c3_gpio>;
scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
status = "okay";
sgtl5000: codec@a {
......@@ -117,28 +135,10 @@ sgtl5000: codec@a {
VDDIO-supply = <&reg_3v3>;
clocks = <&mclk>;
};
touchscreen1: eeti@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti1>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&iomuxc {
imx53-tx53-x13x {
pinctrl_i2c2: i2c2-grp1 {
fsl,pins = <
MX53_PAD_KEY_ROW3__I2C2_SDA 0xc0000000
MX53_PAD_KEY_COL3__I2C2_SCL 0xc0000000
>;
};
pinctrl_lvds0: lvds0grp {
fsl,pins = <
MX53_PAD_LVDS0_TX3_P__LDB_LVDS0_TX3 0x80000000
......
arch/arm/boot/dts/imx53-tx53.dtsi
View file @ da7920e3
/*
* Copyright 2012 <LW@KARO-electronics.de>
* Copyright 2012-2017 <LW@KARO-electronics.de>
* based on imx53-qsb.dts
* Copyright 2011 Freescale Semiconductor, Inc.
* Copyright 2011 Linaro Ltd.
*
* The code contained herein is licensed under the GNU General Public
* License. You may obtain a copy of the GNU General Public License
* Version 2 at the following locations:
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* http://www.opensource.org/licenses/gpl-license.html
* http://www.gnu.org/copyleft/gpl.html
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
#include "imx53.dtsi"
......@@ -66,61 +96,50 @@ user {
};
};
regulators {
compatible = "simple-bus";
#address-cells = <1>;
#size-cells = <0>;
reg_2v5: regulator@0 {
compatible = "regulator-fixed";
reg = <0>;
regulator-name = "2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_2v5: regulator-2v5 {
compatible = "regulator-fixed";
regulator-name = "2V5";
regulator-min-microvolt = <2500000>;
regulator-max-microvolt = <2500000>;
};
reg_3v3: regulator@1 {
compatible = "regulator-fixed";
reg = <1>;
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_3v3: regulator-3v3 {
compatible = "regulator-fixed";
regulator-name = "3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
};
reg_can_xcvr: regulator@2 {
compatible = "regulator-fixed";
reg = <2>;
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
reg_can_xcvr: regulator-can-xcvr {
compatible = "regulator-fixed";
regulator-name = "CAN XCVR";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_can_xcvr>;
gpio = <&gpio4 21 GPIO_ACTIVE_HIGH>;
};
reg_usbh1_vbus: regulator@3 {
compatible = "regulator-fixed";
reg = <3>;
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbh1_vbus: regulator-usbh1-vbus {
compatible = "regulator-fixed";
regulator-name = "usbh1_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbh1_vbus>;
gpio = <&gpio3 31 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg_vbus: regulator@4 {
compatible = "regulator-fixed";
reg = <4>;
regulator-name = "usbotg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
reg_usbotg_vbus: regulator-usbotg-vbus {
compatible = "regulator-fixed";
regulator-name = "usbotg_vbus";
regulator-min-microvolt = <5000000>;
regulator-max-microvolt = <5000000>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usbotg_vbus>;
gpio = <&gpio1 7 GPIO_ACTIVE_HIGH>;
enable-active-high;
};
sound {
......@@ -208,14 +227,17 @@ &fec {
phy0: ethernet-phy@0 {
interrupt-parent = <&gpio2>;
interrupts = <4>;
interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
device_type = "ethernet-phy";
};
};
&i2c1 {
pinctrl-names = "default";
pinctrl-names = "default", "gpio";
pinctrl-0 = <&pinctrl_i2c1>;
pinctrl-0 = <&pinctrl_i2c1_gpio>;
scl-gpios = <&gpio3 21 GPIO_ACTIVE_HIGH>;
sda-gpios = <&gpio3 28 GPIO_ACTIVE_HIGH>;
clock-frequency = <400000>;
status = "okay";
......@@ -225,7 +247,9 @@ rtc1: ds1339@68 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_ds1339>;
interrupt-parent = <&gpio4>;
interrupts = <20 0>;
interrupts = <20 IRQ_TYPE_EDGE_FALLING>;
trickle-resistor-ohms = <250>;
trickle-diode-disable;
};
};
......@@ -368,15 +392,29 @@ pinctrl_gpio_key: gpio-keygrp {
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX53_PAD_EIM_D21__I2C1_SCL 0xc0000000
MX53_PAD_EIM_D28__I2C1_SDA 0xc0000000
MX53_PAD_EIM_D21__I2C1_SCL 0x400001e4
MX53_PAD_EIM_D28__I2C1_SDA 0x400001e4
>;
};
pinctrl_i2c1_gpio: i2c1-gpiogrp {
fsl,pins = <
MX53_PAD_EIM_D21__GPIO3_21 0x400001e6
MX53_PAD_EIM_D28__GPIO3_28 0x400001e6
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX53_PAD_GPIO_3__I2C3_SCL 0xc0000000
MX53_PAD_GPIO_6__I2C3_SDA 0xc0000000
MX53_PAD_GPIO_3__I2C3_SCL 0x400001e4
MX53_PAD_GPIO_6__I2C3_SDA 0x400001e4
>;
};
pinctrl_i2c3_gpio: i2c3-gpiogrp {
fsl,pins = <
MX53_PAD_GPIO_3__GPIO1_3 0x400001e6
MX53_PAD_GPIO_6__GPIO1_6 0x400001e6
>;
};
......
arch/arm/boot/dts/imx53.dtsi
View file @ da7920e3
......@@ -299,14 +299,14 @@ aipstz1: bridge@53f00000 {
reg = <0x53f00000 0x60>;
};
usbphy0: usbphy@0 {
usbphy0: usbphy-0 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY1_GATE>;
clock-names = "main_clk";
status = "okay";
};
usbphy1: usbphy@1 {
usbphy1: usbphy-1 {
compatible = "usb-nop-xceiv";
clocks = <&clks IMX5_CLK_USB_PHY2_GATE>;
clock-names = "main_clk";
......
arch/arm/boot/dts/imx6dl-aristainetos2_4.dts
View file @ da7920e3
......@@ -52,7 +52,7 @@ memory {
reg = <0x10000000 0x40000000>;
};
display0: display@di0 {
display0: disp0 {
#address-cells = <1>;
#size-cells = <0>;
compatible = "fsl,imx-parallel-display";
......
arch/arm/boot/dts/imx6dl-aristainetos_4.dts
View file @ da7920e3
......@@ -32,7 +32,7 @@ memory {
};
soc {
display0: display@di0 {
display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
......
arch/arm/boot/dts/imx6dl-aristainetos_7.dts
View file @ da7920e3
......@@ -21,7 +21,7 @@ memory {
};
soc {
display0: display@di0 {
display0: disp0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
......
arch/arm/boot/dts/imx6dl-colibri-eval-v3.dts
View file @ da7920e3
......@@ -88,7 +88,7 @@ wakeup {
};
};
lcd_display: display@di0 {
lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx6dl-icore.dts
View file @ da7920e3
......@@ -57,3 +57,12 @@ &can1 {
&can2 {
status = "okay";
};
&i2c1 {
max11801: touchscreen@48 {
compatible = "maxim,max11801";
reg = <0x48>;
interrupt-parent = <&gpio3>;
interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
};
};
arch/arm/boot/dts/imx6dl-tx6dl-comtft.dts
View file @ da7920e3
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6DL Module on CoMpact TFT";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
};
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&ET070001DM6>;
ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
&backlight {
pwms = <&pwm2 0 500000 0>;
/delete-property/ turn-on-delay-ms;
};
&can1 {
......@@ -116,14 +62,14 @@ &can2 {
xceiver-supply = <&reg_3v3>;
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
status = "disabled";
};
&lcd_panel {
compatible = "edt,etm0700g0edh6";
};
&reg_can_xcvr {
status = "disabled";
};
......
arch/arm/boot/dts/imx6dl-tx6s-8034-mb7.dts 0 → 100644
View file @ da7920e3
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl-tx6s-8034.dts"
#include "imx6qdl-tx6-mb7.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8034 Module on MB7 baseboard";
};
arch/arm/boot/dts/imx6dl-tx6s-8034.dts
View file @ da7920e3
/*
* Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,174 +42,15 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8034 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &display;
ipu1 = &ipu1;
};
cpus {
/delete-node/ cpu@1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd0_pwr>;
enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_2>;
interface-pix-fmt = "rgb24";
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&vga>;
vga: VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ds1339 {
......@@ -227,11 +68,3 @@ MX6QDL_PAD_SD1_DAT3__SD1_DATA3 0x070b1
MX6QDL_PAD_SD3_CMD__GPIO7_IO02 0x170b0 /* SD1 CD */
>;
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&reg_lcd0_pwr {
status = "disabled";
};
arch/arm/boot/dts/imx6dl-tx6s-8035-mb7.dts 0 → 100644
View file @ da7920e3
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl-tx6s-8035.dts"
#include "imx6qdl-tx6-mb7.dtsi"
/ {
model = "Ka-Ro electronics TX6U-8035 Module on MB7 baseboard";
};
arch/arm/boot/dts/imx6dl-tx6s-8035.dts
View file @ da7920e3
/*
* Copyright 2015-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2015-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,174 +42,15 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6S-8035 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &display;
ipu1 = &ipu1;
};
cpus {
/delete-node/ cpu@1;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd0_pwr>;
enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_2>;
interface-pix-fmt = "rgb24";
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&vga>;
vga: VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ds1339 {
......@@ -220,14 +61,6 @@ &gpmi {
status = "disabled";
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&reg_lcd0_pwr {
status = "disabled";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
......
arch/arm/boot/dts/imx6dl-tx6u-801x.dts
View file @ da7920e3
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,166 +42,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6U-801x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
arch/arm/boot/dts/imx6dl-tx6u-8033-mb7.dts 0 → 100644
View file @ da7920e3
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl-tx6u-8033.dts"
#include "imx6qdl-tx6-mb7.dtsi"
/ {
model = "Ka-Ro electronics TX6U-8033 Module on MB7 baseboard";
};
arch/arm/boot/dts/imx6dl-tx6u-8033.dts
View file @ da7920e3
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,169 +42,11 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6U-8033 Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_lcd0_pwr>;
enable-gpios = <&gpio3 29 GPIO_ACTIVE_HIGH>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_2>;
interface-pix-fmt = "rgb24";
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&vga>;
vga: VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ds1339 {
......@@ -215,14 +57,6 @@ &gpmi {
status = "disabled";
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&reg_lcd0_pwr {
status = "disabled";
};
&usdhc4 {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_usdhc4>;
......
arch/arm/boot/dts/imx6dl-tx6u-80xx-mb7.dts 0 → 100644
View file @ da7920e3
/*
* Copyright 2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
* version 2 as published by the Free Software Foundation.
*
* This file is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6dl-tx6u-801x.dts"
#include "imx6qdl-tx6-mb7.dtsi"
/ {
model = "Ka-Ro electronics TX6U-8030/-8010/-8012 Module on MB7 baseboard";
};
arch/arm/boot/dts/imx6dl-tx6u-811x.dts
View file @ da7920e3
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,137 +42,9 @@
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lvds.dtsi"
/ {
model = "Ka-Ro electronics TX6U-811x Module";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &lvds0;
lvds0 = &lvds0;
lvds1 = &lvds1;
};
backlight0: backlight0 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_lcd0_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
backlight1: backlight1 {
compatible = "pwm-backlight";
pwms = <&pwm1 0 500000 0>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
};
&i2c3 {
polytouch2: eeti@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupt-parent = <&gpio3>;
interrupts = <22 0>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&kpp {
status = "disabled"; /* pad conflict with backlight1 PWM */
};
&ldb {
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds_timing0>;
lvds_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
lvds1: lvds-channel@1 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "disabled";
display-timings {
native-mode = <&lvds_timing1>;
lvds_timing1: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&pwm1 {
status = "okay";
};
&iomuxc {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
};
arch/arm/boot/dts/imx6dl-tx6u-81xx-mb7.dts
View file @ da7920e3
/*
* Copyright 2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2016-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -40,216 +40,9 @@
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6dl-tx6u-811x.dts"
#include "imx6qdl-tx6-mb7.dtsi"
/ {
model = "Ka-Ro electronics TX6U-81xx Module on MB7 baseboard";
compatible = "karo,imx6dl-tx6dl", "fsl,imx6dl";
aliases {
display = &lvds0;
lvds0 = &lvds0;
lvds1 = &lvds1;
};
backlight0: backlight0 {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_lcd0_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
backlight1: backlight1 {
compatible = "pwm-backlight";
pwms = <&pwm1 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_lcd1_pwr>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
};
&can1 {
status = "disabled";
};
&can2 {
xceiver-supply = <&reg_3v3>;
};
&i2c3 {
polytouch1: eeti@4 {
compatible = "eeti,egalax_ts";
reg = <0x04>;
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_eeti>;
interrupts-extended = <&gpio3 22 IRQ_TYPE_EDGE_FALLING>;
wakeup-gpios = <&gpio3 22 GPIO_ACTIVE_HIGH>;
wakeup-source;
};
};
&kpp {
status = "disabled"; /* pads partially clash with backlight1 PWM */
};
&ldb {
status = "okay";
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds0_timing1>;
lvds0_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
lvds0_timing1: VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hfront-porch = <16>;
vback-porch = <31>;
vfront-porch = <12>;
hsync-len = <96>;
vsync-len = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
lvds0_timing2: nl12880bc20 {
clock-frequency = <71000000>;
hactive = <1280>;
vactive = <800>;
hback-porch = <50>;
hfront-porch = <50>;
vback-porch = <5>;
vfront-porch = <5>;
hsync-len = <60>;
vsync-len = <13>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
lvds1: lvds-channel@1 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
status = "okay";
display-timings {
native-mode = <&lvds1_timing2>;
lvds1_timing0: hsd100pxn1 {
clock-frequency = <65000000>;
hactive = <1024>;
vactive = <768>;
hback-porch = <220>;
hfront-porch = <40>;
vback-porch = <21>;
vfront-porch = <7>;
hsync-len = <60>;
vsync-len = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
lvds1_timing1: VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hfront-porch = <16>;
vback-porch = <31>;
vfront-porch = <12>;
hsync-len = <96>;
vsync-len = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
lvds1_timing2: nl12880bc20 {
clock-frequency = <71000000>;
hactive = <1280>;
vactive = <800>;
hback-porch = <50>;
hfront-porch = <50>;
vback-porch = <5>;
vfront-porch = <5>;
hsync-len = <60>;
vsync-len = <13>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
};
&pwm1 {
status = "okay";
};
&iomuxc {
pinctrl_eeti: eetigrp {
fsl,pins = <
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b1 /* Interrupt */
>;
};
model = "Ka-Ro electronics TX6U-8130/-8110 Module on MB7 baseboard";
};
arch/arm/boot/dts/imx6dl-wandboard-revd1.dts 0 → 100644
View file @ da7920e3
/*
* Copyright 2013 Freescale Semiconductor, Inc.
*
* Author: Fabio Estevam <fabio.estevam@freescale.com>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
* published by the Free Software Foundation.
*
*/
/dts-v1/;
#include "imx6dl.dtsi"
#include "imx6qdl-wandboard-revd1.dtsi"
/ {
model = "Wandboard i.MX6 Dual Lite Board revD1";
compatible = "wand,imx6dl-wandboard", "fsl,imx6dl";
memory {
reg = <0x10000000 0x40000000>;
};
};
arch/arm/boot/dts/imx6q-apalis-eval.dts
View file @ da7920e3
......@@ -76,7 +76,7 @@ wakeup {
};
};
lcd_display: display@di0 {
lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx6q-apalis-ixora-v1.1.dts
View file @ da7920e3
......@@ -77,7 +77,7 @@ wakeup {
};
};
lcd_display: display@di0 {
lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx6q-apalis-ixora.dts
View file @ da7920e3
......@@ -76,7 +76,7 @@ wakeup {
};
};
lcd_display: display@di0 {
lcd_display: disp0 {
compatible = "fsl,imx-parallel-display";
#address-cells = <1>;
#size-cells = <0>;
......
arch/arm/boot/dts/imx6q-cm-fx6.dts
View file @ da7920e3
......@@ -77,8 +77,7 @@ reg_pcie_power_on_gpio: regulator-pcie-power-on-gpio {
regulator-name = "regulator-pcie-power-on-gpio";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
gpio = <&gpio2 24 GPIO_ACTIVE_HIGH>;
enable-active-high;
gpio = <&gpio2 24 GPIO_ACTIVE_LOW>;
};
reg_usb_h1_vbus: usb_h1_vbus {
......@@ -362,7 +361,7 @@ &pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie>;
reset-gpio = <&gpio1 26 GPIO_ACTIVE_LOW>;
vdd-supply = <&reg_pcie_power_on_gpio>;
vpcie-supply = <&reg_pcie_power_on_gpio>;
status = "okay";
};
......
arch/arm/boot/dts/imx6q-display5-tianma-tm070-1280x768.dts 0 → 100644
View file @ da7920e3
/*
* Copyright 2017
* Lukasz Majewski, DENX Software Engineering, lukma@denx.de
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
* licensing only applies to this file, and not this project as a
* whole.
*
* a) This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without
* any warranty of any kind, whether express or implied.
*
* Or, alternatively,
*
* b) Permission is hereby granted, free of charge, to any person
* obtaining a copy of this software and associated documentation
* files (the "Software"), to deal in the Software without
* restriction, including without limitation the rights to use,
* copy, modify, merge, publish, distribute, sublicense, and/or
* sell copies of the Software, and to permit persons to whom the
* Software is furnished to do so, subject to the following
* conditions:
*
* The above copyright notice and this permission notice shall be
* included in all copies or substantial portions of the Software.
*
* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
* EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
* OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
* HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
* WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
* FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
* OTHER DEALINGS IN THE SOFTWARE.
*/
/dts-v1/;
#include "imx6q-display5.dtsi"
&panel {
compatible = "tianma,tm070jdhg30";
};
&ldb {
lvds0: lvds-channel@0 {
fsl,data-mapping = "spwg";
fsl,data-width = <18>;
};
};
arch/arm/boot/dts/imx6q-display5.dtsi 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-gw5400-a.dts
View file @ da7920e3
......@@ -392,127 +392,124 @@ &usdhc3 {
};
&iomuxc {
imx6q-gw5400-a {
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
>;
};
pinctrl_audmux: audmuxgrp {
fsl,pins = <
MX6QDL_PAD_SD2_DAT0__AUD4_RXD 0x130b0
MX6QDL_PAD_SD2_DAT3__AUD4_TXC 0x130b0
MX6QDL_PAD_SD2_DAT2__AUD4_TXD 0x110b0
MX6QDL_PAD_SD2_DAT1__AUD4_TXFS 0x130b0
MX6QDL_PAD_GPIO_0__CCM_CLKO1 0x130b0 /* AUD4_MCK */
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
>;
};
pinctrl_ecspi1: ecspi1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D17__ECSPI1_MISO 0x100b1
MX6QDL_PAD_EIM_D18__ECSPI1_MOSI 0x100b1
MX6QDL_PAD_EIM_D16__ECSPI1_SCLK 0x100b1
MX6QDL_PAD_EIM_D19__GPIO3_IO19 0x1b0b0 /* SPINOR_CS0# */
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
>;
};
pinctrl_enet: enetgrp {
fsl,pins = <
MX6QDL_PAD_RGMII_RXC__RGMII_RXC 0x1b030
MX6QDL_PAD_RGMII_RD0__RGMII_RD0 0x1b030
MX6QDL_PAD_RGMII_RD1__RGMII_RD1 0x1b030
MX6QDL_PAD_RGMII_RD2__RGMII_RD2 0x1b030
MX6QDL_PAD_RGMII_RD3__RGMII_RD3 0x1b030
MX6QDL_PAD_RGMII_RX_CTL__RGMII_RX_CTL 0x1b030
MX6QDL_PAD_RGMII_TXC__RGMII_TXC 0x1b030
MX6QDL_PAD_RGMII_TD0__RGMII_TD0 0x1b030
MX6QDL_PAD_RGMII_TD1__RGMII_TD1 0x1b030
MX6QDL_PAD_RGMII_TD2__RGMII_TD2 0x1b030
MX6QDL_PAD_RGMII_TD3__RGMII_TD3 0x1b030
MX6QDL_PAD_RGMII_TX_CTL__RGMII_TX_CTL 0x1b030
MX6QDL_PAD_ENET_REF_CLK__ENET_TX_CLK 0x1b0b0
MX6QDL_PAD_ENET_MDIO__ENET_MDIO 0x1b0b0
MX6QDL_PAD_ENET_MDC__ENET_MDC 0x1b0b0
MX6QDL_PAD_GPIO_16__ENET_REF_CLK 0x4001b0a8
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
>;
};
pinctrl_gpio_leds: gpioledsgrp {
fsl,pins = <
MX6QDL_PAD_KEY_COL0__GPIO4_IO06 0x1b0b0 /* user1 led */
MX6QDL_PAD_KEY_COL2__GPIO4_IO10 0x1b0b0 /* user2 led */
MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x1b0b0 /* user3 led */
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c1: i2c1grp {
fsl,pins = <
MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c2: i2c2grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_i2c3: i2c3grp {
fsl,pins = <
MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
>;
};
pinctrl_pcie: pciegrp {
fsl,pins = <
MX6QDL_PAD_ENET_TX_EN__GPIO1_IO28 0x1b0b0 /* PCIE IRQ */
MX6QDL_PAD_ENET_TXD1__GPIO1_IO29 0x1b0b0 /* PCIE RST */
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
>;
};
pinctrl_pps: ppsgrp {
fsl,pins = <
MX6QDL_PAD_GPIO_5__GPIO1_IO05 0x1b0b0 /* GPS_PPS */
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart1: uart1grp {
fsl,pins = <
MX6QDL_PAD_SD3_DAT7__UART1_TX_DATA 0x1b0b1
MX6QDL_PAD_SD3_DAT6__UART1_RX_DATA 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart2: uart2grp {
fsl,pins = <
MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
>;
};
pinctrl_uart5: uart5grp {
fsl,pins = <
MX6QDL_PAD_KEY_COL1__UART5_TX_DATA 0x1b0b1
MX6QDL_PAD_KEY_ROW1__UART5_RX_DATA 0x1b0b1
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
>;
};
pinctrl_usbotg: usbotggrp {
fsl,pins = <
MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
MX6QDL_PAD_EIM_D22__GPIO3_IO22 0x1b0b0 /* OTG_PWR_EN */
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
pinctrl_usdhc3: usdhc3grp {
fsl,pins = <
MX6QDL_PAD_SD3_CMD__SD3_CMD 0x17059
MX6QDL_PAD_SD3_CLK__SD3_CLK 0x10059
MX6QDL_PAD_SD3_DAT0__SD3_DATA0 0x17059
MX6QDL_PAD_SD3_DAT1__SD3_DATA1 0x17059
MX6QDL_PAD_SD3_DAT2__SD3_DATA2 0x17059
MX6QDL_PAD_SD3_DAT3__SD3_DATA3 0x17059
>;
};
};
arch/arm/boot/dts/imx6q-icore-rqs.dts
View file @ da7920e3
......@@ -47,30 +47,6 @@
/ {
model = "Engicam i.CoreM6 Quad/Dual RQS Starter Kit";
compatible = "engicam,imx6-icore-rqs", "fsl,imx6q";
sound {
compatible = "fsl,imx-audio-sgtl5000";
model = "imx-audio-sgtl5000";
ssi-controller = <&ssi1>;
audio-codec = <&codec>;
audio-routing =
"MIC_IN", "Mic Jack",
"Mic Jack", "Mic Bias",
"Headphone Jack", "HP_OUT";
mux-int-port = <1>;
mux-ext-port = <4>;
};
};
&i2c3 {
codec: sgtl5000@a {
compatible = "fsl,sgtl5000";
reg = <0x0a>;
clocks = <&clks IMX6QDL_CLK_CKO>;
VDDA-supply = <&reg_2p5v>;
VDDIO-supply = <&reg_3p3v>;
VDDD-supply = <&reg_1p8v>;
};
};
&sata {
......
arch/arm/boot/dts/imx6q-novena.dts
View file @ da7920e3
......@@ -158,7 +158,6 @@ reg_pcie: regulator-pcie {
regulator-max-microvolt = <1500000>;
gpio = <&gpio7 12 GPIO_ACTIVE_HIGH>;
enable-active-high;
regulator-always-on;
};
reg_sata: regulator-sata {
......@@ -447,6 +446,7 @@ &pcie {
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_pcie_novena>;
reset-gpio = <&gpio3 29 GPIO_ACTIVE_LOW>;
vpcie-supply = <&reg_pcie>;
status = "okay";
};
......
arch/arm/boot/dts/imx6q-pistachio.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-tx6q-1010-comtft.dts
View file @ da7920e3
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,70 +42,16 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010 Module on CoMpact TFT";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
};
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 0>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
native-mode = <&ET070001DM6>;
ET070001DM6: CoMTFT { /* same as ET0700 but with inverted pixel clock */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
};
};
&backlight {
pwms = <&pwm2 0 500000 0>;
/delete-property/ turn-on-delay-ms;
};
&can1 {
......@@ -116,14 +62,14 @@ &can2 {
xceiver-supply = <&reg_3v3>;
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
};
&kpp {
status = "disabled";
};
&lcd_panel {
compatible = "edt,etm0700g0edh6";
};
&reg_can_xcvr {
status = "disabled";
};
......
arch/arm/boot/dts/imx6q-tx6q-1010.dts
View file @ da7920e3
/*
* Copyright 2014-2016 Lothar Waßmann <LW@KARO-electronics.de>
* Copyright 2014-2017 Lothar Waßmann <LW@KARO-electronics.de>
*
* This file is dual-licensed: you can use it either under the terms
* of the GPL or the X11 license, at your option. Note that this dual
......@@ -42,166 +42,13 @@
/dts-v1/;
#include "imx6q.dtsi"
#include "imx6qdl-tx6.dtsi"
#include "imx6qdl-tx6-lcd.dtsi"
/ {
model = "Ka-Ro electronics TX6Q-1010 Module";
model = "Ka-Ro electronics TX6Q-1010/-1030 Module";
compatible = "karo,imx6q-tx6q", "fsl,imx6q";
aliases {
display = &display;
};
backlight: backlight {
compatible = "pwm-backlight";
pwms = <&pwm2 0 500000 PWM_POLARITY_INVERTED>;
power-supply = <&reg_3v3>;
/*
* a poor man's way to create a 1:1 relationship between
* the PWM value and the actual duty cycle
*/
brightness-levels = < 0 1 2 3 4 5 6 7 8 9
10 11 12 13 14 15 16 17 18 19
20 21 22 23 24 25 26 27 28 29
30 31 32 33 34 35 36 37 38 39
40 41 42 43 44 45 46 47 48 49
50 51 52 53 54 55 56 57 58 59
60 61 62 63 64 65 66 67 68 69
70 71 72 73 74 75 76 77 78 79
80 81 82 83 84 85 86 87 88 89
90 91 92 93 94 95 96 97 98 99
100>;
default-brightness-level = <50>;
};
display: display@di0 {
compatible = "fsl,imx-parallel-display";
interface-pix-fmt = "rgb24";
pinctrl-names = "default";
pinctrl-0 = <&pinctrl_disp0_1>;
status = "okay";
port {
display0_in: endpoint {
remote-endpoint = <&ipu1_di0_disp0>;
};
};
display-timings {
VGA {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <48>;
hsync-len = <96>;
hfront-porch = <16>;
vback-porch = <31>;
vsync-len = <2>;
vfront-porch = <12>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETV570 {
clock-frequency = <25200000>;
hactive = <640>;
vactive = <480>;
hback-porch = <114>;
hsync-len = <30>;
hfront-porch = <16>;
vback-porch = <32>;
vsync-len = <3>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0350 {
clock-frequency = <6413760>;
hactive = <320>;
vactive = <240>;
hback-porch = <34>;
hsync-len = <34>;
hfront-porch = <20>;
vback-porch = <15>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0430 {
clock-frequency = <9009000>;
hactive = <480>;
vactive = <272>;
hback-porch = <2>;
hsync-len = <41>;
hfront-porch = <2>;
vback-porch = <2>;
vsync-len = <10>;
vfront-porch = <2>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <1>;
};
ET0500 {
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ET0700 { /* same as ET0500 */
clock-frequency = <33264000>;
hactive = <800>;
vactive = <480>;
hback-porch = <88>;
hsync-len = <128>;
hfront-porch = <40>;
vback-porch = <33>;
vsync-len = <2>;
vfront-porch = <10>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
ETQ570 {
clock-frequency = <6596040>;
hactive = <320>;
vactive = <240>;
hback-porch = <38>;
hsync-len = <30>;
hfront-porch = <30>;
vback-porch = <16>;
vsync-len = <3>;
vfront-porch = <4>;
hsync-active = <0>;
vsync-active = <0>;
de-active = <1>;
pixelclk-active = <0>;
};
};
};
};
&ipu1_di0_disp0 {
remote-endpoint = <&display0_in>;
&ipu2 {
status = "disabled";
};
arch/arm/boot/dts/imx6q-tx6q-1020.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-tx6q-1036-mb7.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-tx6q-1036.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-tx6q-10x0-mb7.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-tx6q-1110.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-tx6q-11x0-mb7.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-utilite-pro.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6q-wandboard-revd1.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-apf6dev.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-gw51xx.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-gw52xx.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-gw53xx.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-gw54xx.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-gw551x.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-gw552x.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-icore-rqs.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-icore.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-nitrogen6x.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-sabrelite.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-sabresd.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-tx6-lcd.dtsi 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-tx6-lvds.dtsi 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-tx6-mb7.dtsi 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-tx6.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-wandboard-revd1.dtsi 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl-zii-rdu2.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qdl.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qp-tx6qp-8037-mb7.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qp-tx6qp-8037.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qp-tx6qp-8137-mb7.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qp-tx6qp-8137.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6qp-wandboard-revd1.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6sx-softing-vining-2000.dts 0 → 100644
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6sx.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6ul-14x14-evk.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6ul-pico-hobbit.dts
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6ul-tx6ul.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx6ul.dtsi
View file @ da7920e3
This diff is collapsed.
arch/arm/boot/dts/imx7d-pico.dts
View file @ da7920e3
This diff is collapsed.
Markdown is supported
0% or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment
GitLab Nexedi Edition | About GitLab | About Nexedi | 沪ICP备2021021310号-2 | 沪ICP备2021021310号-7