mmc: core: Disable HPI for certain Micron (Numonyx) eMMC cards

Certain Micron eMMC v4.5 cards might get broken when HPI feature is used
and hence this patch disables the HPI feature for such buggy cards.

In U-Boot, these cards are reported as

Manufacturer: Micron (ID: 0xFE)
OEM: 0x4E
Name: MMC32G
Revision: 19 (0x13)
Serial: 959241022  Manufact. date: 8/2015 (0x82)  CRC: 0x00
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.5
High Capacity: Yes
Capacity: 29.1 GiB
Boot Partition Size: 16 MiB
Bus Width: 8-bit

According to JEDEC JEP106 manufacturer 0xFE is Numonyx, which was bought by
Micron.
Signed-off-by: Dirk Behme <dirk.behme@de.bosch.com>
Signed-off-by: Mark Craske <Mark_Craske@mentor.com>
Cc: <stable@vger.kernel.org> # 4.8+
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>

drivers/mmc/core/card.h

@@ -82,6 +82,7 @@ struct mmc_fixup {
 #define CID_MANFID_APACER       0x27
 #define CID_MANFID_KINGSTON     0x70
 #define CID_MANFID_HYNIX	0x90
+#define CID_MANFID_NUMONYX	0xFE
 
 #define END_FIXUP { NULL }
 

drivers/mmc/core/quirks.h

@@ -109,6 +109,12 @@ static const struct mmc_fixup mmc_ext_csd_fixups[] = {
 	 */
 	MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_HYNIX,
 			      0x014a, add_quirk, MMC_QUIRK_BROKEN_HPI, 5),
+	/*
+	 * Certain Micron (Numonyx) eMMC 4.5 cards might get broken when HPI
+	 * feature is used so disable the HPI feature for such buggy cards.
+	 */
+	MMC_FIXUP_EXT_CSD_REV(CID_NAME_ANY, CID_MANFID_NUMONYX,
+			      0x014e, add_quirk, MMC_QUIRK_BROKEN_HPI, 6),
 
 	END_FIXUP
 };