Commit dc9ca2af authored by Michael Krufky's avatar Michael Krufky Committed by Linus Torvalds

[PATCH] DVB: lgdt330x check callback fix

Most of the patch is whitespace cleanup, but more importantly, this patch
checks to see whether a callback is set before calling it.  On cx88 boards
(currently the only boards using lgdt330x in 2.6.13) every callback is set.
However, newer drivers currently in development leave a callback undefined,
and lgdt330x must not call it if it isn't defined.
Signed-off-by: default avatarPatrick Boettcher <pb@linuxtv.org>
Signed-off-by: default avatarMichael Krufky <mkrufky@m1k.net>
Signed-off-by: default avatarAndrew Morton <akpm@osdl.org>
Signed-off-by: default avatarLinus Torvalds <torvalds@osdl.org>
parent 2684f5c7
......@@ -69,8 +69,8 @@ struct lgdt330x_state
};
static int i2c_write_demod_bytes (struct lgdt330x_state* state,
u8 *buf, /* data bytes to send */
int len /* number of bytes to send */ )
u8 *buf, /* data bytes to send */
int len /* number of bytes to send */ )
{
struct i2c_msg msg =
{ .addr = state->config->demod_address,
......@@ -129,13 +129,13 @@ static int lgdt3302_SwReset(struct lgdt330x_state* state)
};
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) and unmask interrupts */
reset[1] = 0x7f;
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
reset, sizeof(reset));
}
return ret;
}
......@@ -149,13 +149,13 @@ static int lgdt3303_SwReset(struct lgdt330x_state* state)
};
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
reset, sizeof(reset));
if (ret == 0) {
/* force reset high (inactive) */
reset[1] = 0x01;
ret = i2c_write_demod_bytes(state,
reset, sizeof(reset));
reset, sizeof(reset));
}
return ret;
}
......@@ -172,7 +172,6 @@ static int lgdt330x_SwReset(struct lgdt330x_state* state)
}
}
static int lgdt330x_init(struct dvb_frontend* fe)
{
/* Hardware reset is done using gpio[0] of cx23880x chip.
......@@ -229,13 +228,13 @@ static int lgdt330x_init(struct dvb_frontend* fe)
case LGDT3302:
chip_name = "LGDT3302";
err = i2c_write_demod_bytes(state, lgdt3302_init_data,
sizeof(lgdt3302_init_data));
break;
sizeof(lgdt3302_init_data));
break;
case LGDT3303:
chip_name = "LGDT3303";
err = i2c_write_demod_bytes(state, lgdt3303_init_data,
sizeof(lgdt3303_init_data));
break;
sizeof(lgdt3303_init_data));
break;
default:
chip_name = "undefined";
printk (KERN_WARNING "Only LGDT3302 and LGDT3303 are supported chips.\n");
......@@ -262,15 +261,15 @@ static int lgdt330x_read_ucblocks(struct dvb_frontend* fe, u32* ucblocks)
switch (state->config->demod_chip) {
case LGDT3302:
err = i2c_read_demod_bytes(state, LGDT3302_PACKET_ERR_COUNTER1,
buf, sizeof(buf));
break;
buf, sizeof(buf));
break;
case LGDT3303:
err = i2c_read_demod_bytes(state, LGDT3303_PACKET_ERR_COUNTER1,
buf, sizeof(buf));
break;
buf, sizeof(buf));
break;
default:
printk(KERN_WARNING
"Only LGDT3302 and LGDT3303 are supported chips.\n");
"Only LGDT3302 and LGDT3303 are supported chips.\n");
err = -ENODEV;
}
......@@ -330,7 +329,7 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
if (state->config->demod_chip == LGDT3303) {
err = i2c_write_demod_bytes(state, lgdt3303_8vsb_44_data,
sizeof(lgdt3303_8vsb_44_data));
sizeof(lgdt3303_8vsb_44_data));
}
break;
......@@ -378,18 +377,19 @@ static int lgdt330x_set_parameters(struct dvb_frontend* fe,
/* Select the requested mode */
i2c_write_demod_bytes(state, top_ctrl_cfg,
sizeof(top_ctrl_cfg));
state->config->set_ts_params(fe, 0);
sizeof(top_ctrl_cfg));
if (state->config->set_ts_params)
state->config->set_ts_params(fe, 0);
state->current_modulation = param->u.vsb.modulation;
}
/* Change only if we are actually changing the channel */
if (state->current_frequency != param->frequency) {
/* Tune to the new frequency */
/* Tune to the specified frequency */
if (state->config->pll_set)
state->config->pll_set(fe, param);
/* Keep track of the new frequency */
state->current_frequency = param->frequency;
}
/* Keep track of the new frequency */
state->current_frequency = param->frequency;
lgdt330x_SwReset(state);
return 0;
}
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment