rtc: 88pm860x: fix unintended sign extension

Shifting a u8 by 24 will cause the value to be promoted to an integer. If
the top bit of the u8 is set then the following conversion to an unsigned
long will sign extend the value causing the upper 32 bits to be set in
the result.

Fix this by casting the u8 value to an unsigned long before the shift.

Detected by CoverityScan, CID#144925-144928 ("Unintended sign extension")

Fixes: 008b3040 ("mfd: Add rtc support to 88pm860x")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>

drivers/rtc/rtc-88pm860x.c

@@ -115,11 +115,13 @@ static int pm860x_rtc_read_time(struct device *dev, struct rtc_time *tm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -145,7 +147,8 @@ static int pm860x_rtc_set_time(struct device *dev, struct rtc_time *tm)
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	base = ticks - data;
 	dev_dbg(info->dev, "set base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -170,10 +173,12 @@ static int pm860x_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	pm860x_bulk_read(info->i2c, PM8607_RTC_EXPIRE1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);
@@ -198,11 +203,13 @@ static int pm860x_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
 	pm860x_page_bulk_read(info->i2c, REG0_ADDR, 8, buf);
 	dev_dbg(info->dev, "%x-%x-%x-%x-%x-%x-%x-%x\n", buf[0], buf[1],
 		buf[2], buf[3], buf[4], buf[5], buf[6], buf[7]);
-	base = (buf[1] << 24) | (buf[3] << 16) | (buf[5] << 8) | buf[7];
+	base = ((unsigned long)buf[1] << 24) | (buf[3] << 16) |
+		(buf[5] << 8) | buf[7];
 
 	/* load 32-bit read-only counter */
 	pm860x_bulk_read(info->i2c, PM8607_RTC_COUNTER1, 4, buf);
-	data = (buf[3] << 24) | (buf[2] << 16) | (buf[1] << 8) | buf[0];
+	data = ((unsigned long)buf[3] << 24) | (buf[2] << 16) |
+		(buf[1] << 8) | buf[0];
 	ticks = base + data;
 	dev_dbg(info->dev, "get base:0x%lx, RO count:0x%lx, ticks:0x%lx\n",
 		base, data, ticks);