Merge bk://gkernel.bkbits.net/libata-2.6

into ppc970.osdl.org:/home/torvalds/v2.6/linux

Documentation/dvb/README.dibusb

+Documentation for dib3000mb frontend driver and dibusb device driver
+====================================================================
 
+Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de),
 
-Documentation for dib3000mb frontend driver and dibusb device driver
+dibusb and dib3000mb/mc drivers based on GPL code, which has
 
-The drivers should work with
+Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
 
-- Twinhan VisionPlus VisionDTV USB-Ter DVB-T Device (VP7041)
-	http://www.twinhan.com/
+This program is free software; you can redistribute it and/or
+modify it under the terms of the GNU General Public License as
+published by the Free Software Foundation, version 2.
 
-- CTS Portable (Chinese Television System)
-	http://www.2cts.tv/ctsportable/
 
-- KWorld V-Stream XPERT DTV - DVB-T USB
-	http://www.kworld.com.tw/asp/pindex.asp?id=4&pid=13
+Supported devices USB1.1
+========================
+
+Produced and reselled by Twinhan:
+---------------------------------
+- TwinhanDTV USB-Ter DVB-T Device (VP7041)
+	http://www.twinhan.com/product_terrestrial_3.asp
+
+- TwinhanDTV Magic Box (VP7041e)
+	http://www.twinhan.com/product_terrestrial_4.asp
 
 - HAMA DVB-T USB device
 	http://www.hama.de/portal/articleId*110620/action*2598
 
-- DiBcom USB DVB-T reference device
+- CTS Portable (Chinese Television System)
+	http://www.2cts.tv/ctsportable/
+
+- Unknown USB DVB-T device with vendor ID Hyper-Paltek
+
+
+Produced and reselled by KWorld:
+--------------------------------
+- KWorld V-Stream XPERT DTV DVB-T USB
+	http://www.kworld.com.tw/en/product/DVBT-USB/DVBT-USB.html
 
-- Ultima Electronic/Artec T1 USB TVBOX
+- JetWay DTV DVB-T USB
+	http://www.jetway.com.tw/evisn/product/lcd-tv/DVT-USB/dtv-usb.htm
+
+- ADSTech Instant TV DVB-T USB
+	http://www.adstech.com/products/PTV-333/intro/PTV-333_intro.asp?pid=PTV-333
+
+
+Others:
+-------
+- Ultima Electronic/Artec T1 USB TVBOX (AN2135 and AN2235)
 	http://www.arteceuro.com/products-tvbox.html
 
 - Compro Videomate DVB-U2000 - DVB-T USB
 	http://www.comprousa.com/products/vmu2000.htm
 
-- Unknown USB DVB-T device with vendor ID Hyper-Paltek
+- Grandtec USB DVB-T
+	http://www.grand.com.tw/
 
-Copyright (C) 2004 Patrick Boettcher (patrick.boettcher@desy.de),
+- Avermedia AverTV DVBT USB
+	http://www.avermedia.com/
 
-both drivers based on GPL code, which has
+- DiBcom USB DVB-T reference device (non-public)
 
-Copyright (C) 2004 Amaury Demol for DiBcom (ademol@dibcom.fr)
 
-This program is free software; you can redistribute it and/or
-modify it under the terms of the GNU General Public License as
-published by the Free Software Foundation, version 2.
+Supported devices USB2.0
+========================
+- Yakumo DVB-T mobile
+	http://www.yakumo.de/produkte/index.php?pid=1&ag=DVB-T
+
+- DiBcom USB2.0 DVB-T reference device (non-public)
 
 
-NEWS:
+
+0. NEWS:
+  2004-11-07 - added remote control support. Thanks to David Matthews.
+  2004-11-05 - added support for a new devices (Grandtec/Avermedia/Artec)
+             - merged my changes (for dib3000mb/dibusb) to the FE_REFACTORING, because it became HEAD
+             - moved transfer control (pid filter, fifo control) from usb driver to frontend, it seems
+               better settled there (added xfer_ops-struct)
+             - created a common files for frontends (mc/p/mb)
   2004-09-28 - added support for a new device (Unkown, vendor ID is Hyper-Paltek)
   2004-09-20 - added support for a new device (Compro DVB-U2000), thanks
                to Amaury Demol for reporting
@@ -49,7 +88,7 @@ NEWS:
 
   (old news for vp7041.c)
   2004-07-15 - found out, by accident, that the device has a TUA6010XS for
-               frequency generator
+               PLL
   2004-07-12 - figured out, that the driver should also work with the
                CTS Portable (Chinese Television System)
   2004-07-08 - firmware-extraction-2.422-problem solved, driver is now working
@@ -67,7 +106,7 @@ NEWS:
 
 1. How to use?
 NOTE: This driver was developed using Linux 2.6.6.,
-it is working with 2.6.7, 2.6.8.1.
+it is working with 2.6.7, 2.6.8.1, 2.6.9 .
 
 Linux 2.4.x support is not planned, but patches are very welcome.
 
@@ -81,8 +120,15 @@ The USB driver needs to download a firmware to start working.
 You can either use "get_dvb_firmware dibusb" to download the firmware or you
 can get it directly via
 
+for USB1.1 (AN2135)
 http://linuxtv.org/cgi-bin/cvsweb.cgi/dvb-kernel/firmware/dvb-dibusb-5.0.0.11.fw?rev=1.1&content-type=text/plain
 
+for USB1.1 (AN2235) (a few Artec T1 devices)
+http://linuxtv.org/cgi-bin/cvsweb.cgi/dvb-kernel/firmware/dvb-dibusb-an2235-1.fw?rev=1.1&content-type=text/plain
+
+for USB2.0 (FX2)
+http://linuxtv.org/cgi-bin/cvsweb.cgi/dvb-kernel/firmware/dvb-dibusb-6.0.0.5.fw?rev=1.1&content-type=text/plain
+
 1.2. Compiling
 
 Since the driver is in the linux kernel, activating the driver in
@@ -94,15 +140,16 @@ to compile the driver as module. Hotplug does the rest.
 Hotplug is able to load the driver, when it is needed (because you plugged
 in the device).
 
-If you want to enable debug output, you have to load the driver manually.
+If you want to enable debug output, you have to load the driver manually and
+from withing the dvb-kernel cvs repository.
 
 first have a look, which debug level are available:
 
-modinfo dvb-dibusb
 modinfo dib3000mb
+modinfo dvb-dibusb
 
-modprobe dvb-dibusb debug=<level> 
 modprobe dib3000mb debug=<level>
+modprobe dvb-dibusb debug=<level>
 
 should do the trick.
 
@@ -118,21 +165,19 @@ as a slave device in vdr, was not working for me. Some work has to be done
 2. Known problems and bugs
 
 TODO:
-- remote control tasklet
+- remote control
 - signal-quality and strength calculations
-- debug messages restructure
 - i2c address probing
-- 
 
 2.1. Adding support for devices 
 
 It is not possible to determine the range of devices based on the DiBcom
-reference design. This is because the reference design of DiBcom can be sold
-to third persons, without telling DiBcom (so done with the Twinhan VP7041 and
+reference designs. This is because the reference design of DiBcom can be sold
+to thirds, without telling DiBcom (so done with the Twinhan VP7041 and
 the HAMA device).
 
 When you think you have a device like this and the driver does not recognizes it,
-please send the ****load.inf and the ****cap.inf of the Windows driver to me.
+please send the ****load*.inf and the ****cap*.inf of the Windows driver to me.
 
 Sometimes the Vendor or Product ID is identical to the ones of Twinhan, even
 though it is not a Twinhan device (e.g. HAMA), then please send me the name
@@ -153,6 +198,9 @@ Patches, comments and suggestions are very very welcome
 	providing specs, code and help, on which the dvb-dibusb and dib3000mb are
 	based.
 
+   David Matthews for identifying a new device type (Artec T1 with AN2235)
+    and for extending dibusb with remote control event handling. Thank you.
+
    Alex Woods for frequently answering question about usb and dvb
     stuff, a big thank you
 

Documentation/dvb/cards.txt

@@ -38,7 +38,7 @@ o Frontends drivers:
                		  Comtech DVBT-6k07 (SP5730 PLL)
                		  (NxtWave Communications NXT6000 demodulator)
    - sp887x		: Microtune 7202D
-   - dib3000mb	: DiBcom 3000-MB Frontend
+   - dib3000mb	: DiBcom 3000-MB demodulator
   DVB-S/C/T:
    - dst		: TwinHan DST Frontend
 
@@ -69,7 +69,17 @@ o Technotrend / Hauppauge DVB USB devices:
 
 o DiBcom DVB-T USB based devices:
   - Twinhan VisionPlus VisionDTV USB-Ter DVB-T Device
-  - KWorld V-Stream XPERT DTV - DVB-T USB
   - HAMA DVB-T USB device
+  - CTS Portable (Chinese Television System)
+  - KWorld V-Stream XPERT DTV DVB-T USB
+  - JetWay DTV DVB-T USB
+  - ADSTech Instant TV DVB-T USB
+  - Ultima Electronic/Artec T1 USB TVBOX (AN2135 and AN2235)
+  - Compro Videomate DVB-U2000 - DVB-T USB
+  - Grandtec USB DVB-T
+  - Avermedia AverTV DVBT USB
+  - DiBcom USB DVB-T reference device (non-public)
+  - Yakumo DVB-T mobile USB2.0
+  - DiBcom USB2.0 DVB-T reference device (non-public)
 
 o Experimental support for the analog module of the Siemens DVB-C PCI card

Documentation/dvb/get_dvb_firmware

@@ -21,7 +21,7 @@
 use File::Temp qw/ tempdir /;
 use IO::Handle;
 
-@components = ( "alps_tdlb7", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb" );
+@components = ( "sp8870", "sp887x", "tda10045", "tda10046", "av7110", "dec2000t", "dec2540t", "dec3000s", "vp7041", "dibusb" );
 
 # Check args
 syntax() if (scalar(@ARGV) != 1);
@@ -32,7 +32,7 @@ for($i=0; $i < scalar(@components); $i++) {
     if ($cid eq $components[$i]) {
 	$outfile = eval($cid);
 	die $@ if $@;
-	print STDERR "Firmware $outfile extracted successfully. Now copy it to /usr/lib/hotplug/firmware/.\n";
+	print STDERR "Firmware $outfile extracted successfully. Now copy it to either /lib/firmware or /usr/lib/hotplug/firmware/ (depending on your hotplug version).\n";
 	exit(0);
     }
 }
@@ -47,11 +47,11 @@ syntax();
 # ---------------------------------------------------------------
 # Firmware-specific extraction subroutines
 
-sub alps_tdlb7 {
+sub sp8870 {
     my $sourcefile = "tt_Premium_217g.zip";
     my $url = "http://www.technotrend.de/new/217g/$sourcefile";
     my $hash = "53970ec17a538945a6d8cb608a7b3899";
-    my $outfile = "dvb-fe-tdlb7.fw";
+    my $outfile = "dvb-fe-sp8870.fw";
     my $tmpdir = tempdir(DIR => "/tmp", CLEANUP => 1);
 
     checkstandard();

arch/ppc64/kernel/prom_init.c

@@ -1118,16 +1118,6 @@ static void __init prom_close_stdin(void)
 		call_prom("close", 1, 0, val);
 }
 
-static void __init prom_close_stdin(void)
-{
-	unsigned long offset = reloc_offset();
-	struct prom_t *_prom = PTRRELOC(&prom);
-	ihandle val;
-
-	if (prom_getprop(_prom->chosen, "stdin", &val, sizeof(val)) > 0)
-		call_prom("close", 1, 0, val);
-}
-
 static int __init prom_find_machine_type(void)
 {
 	unsigned long offset = reloc_offset();
@@ -1709,9 +1699,6 @@ unsigned long __init prom_init(unsigned long r3, unsigned long r4, unsigned long
 	/* in case stdin is USB and still active on IBM machines... */
 	prom_close_stdin();
 
-	/* in case stdin is USB and still active on IBM machines... */
-	prom_close_stdin();
-
 	/*
 	 * Call OF "quiesce" method to shut down pending DMA's from
 	 * devices etc...

drivers/media/common/saa7146_core.c

@@ -25,11 +25,11 @@ struct list_head saa7146_devices;
 struct semaphore saa7146_devices_lock;
 
 static int initialized = 0;
-int saa7146_num = 0;
+static int saa7146_num = 0;
 
 unsigned int saa7146_debug = 0;
 
-MODULE_PARM(saa7146_debug,"i");
+module_param(saa7146_debug, int, 0644);
 MODULE_PARM_DESC(saa7146_debug, "debug level (default: 0)");
 
 #if 0
@@ -48,7 +48,7 @@ static void dump_registers(struct saa7146_dev* dev)
  * gpio and debi helper functions
  ****************************************************************************/
 
-/* write "data" to the gpio-pin "pin" */
+/* write "data" to the gpio-pin "pin" -- unused */
 void saa7146_set_gpio(struct saa7146_dev *dev, u8 pin, u8 data)
 {
 	u32 value = 0;
@@ -67,7 +67,7 @@ void saa7146_set_gpio(struct saa7146_dev *dev, u8 pin, u8 data)
 }
 
 /* This DEBI code is based on the saa7146 Stradis driver by Nathan Laredo */
-int saa7146_wait_for_debi_done(struct saa7146_dev *dev)
+int saa7146_wait_for_debi_done(struct saa7146_dev *dev, int nobusyloop)
 {
 	unsigned long start;
 
@@ -80,6 +80,8 @@ int saa7146_wait_for_debi_done(struct saa7146_dev *dev)
 			DEB_S(("timed out while waiting for registers getting programmed\n"));
 			return -ETIMEDOUT;
 		}
+		if (nobusyloop)
+			msleep(1);
 	}
 
 	/* wait for transfer to complete */
@@ -92,6 +94,8 @@ int saa7146_wait_for_debi_done(struct saa7146_dev *dev)
 			DEB_S(("timed out while waiting for transfer completion\n"));
 			return -ETIMEDOUT;
 		}
+		if (nobusyloop)
+			msleep(1);
 	}
 
 	return 0;
@@ -248,10 +252,9 @@ void saa7146_setgpio(struct saa7146_dev *dev, int port, u32 data)
 
 /********************************************************************************/
 /* interrupt handler */
-
 static irqreturn_t interrupt_hw(int irq, void *dev_id, struct pt_regs *regs)
 {
-	struct saa7146_dev *dev = (struct saa7146_dev*)dev_id;
+	struct saa7146_dev *dev = dev_id;
 	u32 isr = 0;
 
 	/* read out the interrupt status register */
@@ -318,16 +321,15 @@ static irqreturn_t interrupt_hw(int irq, void *dev_id, struct pt_regs *regs)
 
 static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent)
 {
-	unsigned long adr = 0, len = 0;
-	struct saa7146_dev* dev = kmalloc (sizeof(struct saa7146_dev),GFP_KERNEL);
-	
 	struct saa7146_pci_extension_data *pci_ext = (struct saa7146_pci_extension_data *)ent->driver_data;
 	struct saa7146_extension* ext = pci_ext->ext;
-	int err = 0;
+	struct saa7146_dev *dev;
+	int err = -ENOMEM;
 	
-	if (!(dev = kmalloc (sizeof(struct saa7146_dev),GFP_KERNEL))) {
+	dev = kmalloc(sizeof(struct saa7146_dev), GFP_KERNEL);
+	if (!dev) {
 		ERR(("out of memory.\n"));
-		return -ENOMEM;
+		goto out;
 	}
 
 	/* clear out mem for sure */
@@ -335,38 +337,37 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
 
 	DEB_EE(("pci:%p\n",pci));
 
-	if (pci_enable_device(pci)) {
+	err = pci_enable_device(pci);
+	if (err < 0) {
 		ERR(("pci_enable_device() failed.\n"));
-		err = -EIO;
-		goto pci_error;
+		goto err_free;
 	}
 
 	/* enable bus-mastering */
 	pci_set_master(pci);
 
 	dev->pci = pci;
+
 	/* get chip-revision; this is needed to enable bug-fixes */
-	if( 0 > pci_read_config_dword(dev->pci, PCI_CLASS_REVISION, &dev->revision)) {
+	err = pci_read_config_dword(pci, PCI_CLASS_REVISION, &dev->revision);
+	if (err < 0) {
 		ERR(("pci_read_config_dword() failed.\n"));
-		err = -ENODEV;
-		goto pci_error;
+		goto err_disable;
 	}
 	dev->revision &= 0xf;
 
 	/* remap the memory from virtual to physical adress */
-	adr = pci_resource_start(pci,0);
-	len = pci_resource_len(pci,0);
 
-	if (!request_mem_region(pci_resource_start(pci,0), pci_resource_len(pci,0), "saa7146")) {
-		ERR(("request_mem_region() failed.\n"));
-		err = -ENODEV;
-		goto pci_error;
-	}
+	err = pci_request_region(pci, 0, "saa7146");
+	if (err < 0)
+		goto err_disable;
 
-	if (!(dev->mem = ioremap(adr,len))) {
+	dev->mem = ioremap(pci_resource_start(pci, 0),
+			   pci_resource_len(pci, 0));
+	if (!dev->mem) {
 		ERR(("ioremap() failed.\n"));
 		err = -ENODEV;
-		goto ioremap_error;
+		goto err_release;
 	}
 
 	/* we don't do a master reset here anymore, it screws up
@@ -386,42 +387,40 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
 	saa7146_write(dev, MC2, 0xf8000000);
 
 	/* request an interrupt for the saa7146 */
-	if (request_irq(dev->pci->irq, interrupt_hw, SA_SHIRQ | SA_INTERRUPT,
-			dev->name, dev))
-	{
+	err = request_irq(pci->irq, interrupt_hw, SA_SHIRQ | SA_INTERRUPT,
+			  dev->name, dev);
+	if (err < 0) {
 		ERR(("request_irq() failed.\n"));
-		err = -ENODEV;
-		goto irq_error;
+		goto err_unmap;
 	}
 
-	/* get memory for various stuff */
-	dev->d_rps0.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_RPS_MEM, &dev->d_rps0.dma_handle);	
-	if( NULL == dev->d_rps0.cpu_addr ) {
 		err = -ENOMEM;
-		goto kmalloc_error_1;
-	}
+
+	/* get memory for various stuff */
+	dev->d_rps0.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
+						    &dev->d_rps0.dma_handle);
+	if (!dev->d_rps0.cpu_addr)
+		goto err_free_irq;
 	memset(dev->d_rps0.cpu_addr, 0x0, SAA7146_RPS_MEM);
 
-	dev->d_rps1.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_RPS_MEM, &dev->d_rps1.dma_handle);	
-	if( NULL == dev->d_rps1.cpu_addr ) {
-		err = -ENOMEM;
-		goto kmalloc_error_2;
-	}
+	dev->d_rps1.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
+						    &dev->d_rps1.dma_handle);
+	if (!dev->d_rps1.cpu_addr)
+		goto err_free_rps0;
 	memset(dev->d_rps1.cpu_addr, 0x0, SAA7146_RPS_MEM);
 
-	dev->d_i2c.cpu_addr = pci_alloc_consistent(dev->pci, SAA7146_RPS_MEM, &dev->d_i2c.dma_handle);	
-	if( NULL == dev->d_i2c.cpu_addr ) {
-		err = -ENOMEM;
-		goto kmalloc_error_3;
-	}
+	dev->d_i2c.cpu_addr = pci_alloc_consistent(pci, SAA7146_RPS_MEM,
+						   &dev->d_i2c.dma_handle);
+	if (!dev->d_i2c.cpu_addr)
+		goto err_free_rps1;
 	memset(dev->d_i2c.cpu_addr, 0x0, SAA7146_RPS_MEM);
 
 	/* the rest + print status message */
 
 	/* create a nice device name */
-	sprintf(&dev->name[0], "saa7146 (%d)",saa7146_num);
+	sprintf(dev->name, "saa7146 (%d)", saa7146_num);
 
-	INFO(("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x).\n", dev->mem, dev->revision,dev->pci->irq,dev->pci->subsystem_vendor,dev->pci->subsystem_device));
+	INFO(("found saa7146 @ mem %p (revision %d, irq %d) (0x%04x,0x%04x).\n", dev->mem, dev->revision, pci->irq, pci->subsystem_vendor, pci->subsystem_device));
 	dev->ext = ext;
 
 	pci_set_drvdata(pci,dev);
@@ -438,18 +437,18 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
 	/* set some sane pci arbitrition values */
 	saa7146_write(dev, PCI_BT_V1, 0x1c00101f); 
 
-	if( 0 != ext->probe) {
-		if( 0 != ext->probe(dev) ) {
-			DEB_D(("ext->probe() failed for %p. skipping device.\n",dev));
+	/* TODO: use the status code of the callback */
+
 			err = -ENODEV;
-			goto probe_error;
-		}
+
+	if (ext->probe && ext->probe(dev)) {
+		DEB_D(("ext->probe() failed for %p. skipping device.\n",dev));
+		goto err_free_i2c;
 	}
 
-	if( 0 != ext->attach(dev,pci_ext) ) {
+	if (ext->attach(dev, pci_ext)) {
 		DEB_D(("ext->attach() failed for %p. skipping device.\n",dev));
-			err = -ENODEV;
-			goto attach_error;
+		goto err_unprobe;
 	}
 
 	INIT_LIST_HEAD(&dev->item);
@@ -457,30 +456,46 @@ static int saa7146_init_one(struct pci_dev *pci, const struct pci_device_id *ent
 	saa7146_num++;
 
 	err = 0;
-	goto out;
-attach_error:
-probe_error:
+out:
+	return err;
+
+err_unprobe:
 	pci_set_drvdata(pci,NULL);
-	pci_free_consistent(dev->pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle);
-kmalloc_error_3:
-	pci_free_consistent(dev->pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle);
-kmalloc_error_2:
-	pci_free_consistent(dev->pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle);
-kmalloc_error_1:
-	free_irq(dev->pci->irq, (void *)dev);
-irq_error:
+err_free_i2c:
+	pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr,
+			    dev->d_i2c.dma_handle);
+err_free_rps1:
+	pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr,
+			    dev->d_rps1.dma_handle);
+err_free_rps0:
+	pci_free_consistent(pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr,
+			    dev->d_rps0.dma_handle);
+err_free_irq:
+	free_irq(pci->irq, (void *)dev);
+err_unmap:
 	iounmap(dev->mem);
-ioremap_error:
-        release_mem_region(adr,len);
-pci_error:
+err_release:
+	pci_release_region(pci, 0);
+err_disable:
+	pci_disable_device(pci);
+err_free:
 	kfree(dev);
-out:
-	return err;
+	goto out;
 }
 
 static void saa7146_remove_one(struct pci_dev *pdev)
 {
-	struct saa7146_dev* dev = (struct saa7146_dev*) pci_get_drvdata(pdev);
+	struct saa7146_dev* dev = pci_get_drvdata(pdev);
+	struct {
+		void *addr;
+		dma_addr_t dma;
+	} dev_map[] = {
+		{ dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle },
+		{ dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle },
+		{ dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle },
+		{ NULL, 0 }
+	}, *p;
+
 	DEB_EE(("dev:%p\n",dev));
 
 	dev->ext->detach(dev);
@@ -491,17 +506,15 @@ static void saa7146_remove_one(struct pci_dev *pdev)
 	/* disable all irqs, release irq-routine */
 	saa7146_write(dev, IER, 0);
 
-	free_irq(dev->pci->irq, (void *)dev);
+	free_irq(pdev->irq, dev);
 
-	/* free kernel memory */
-	pci_free_consistent(dev->pci, SAA7146_RPS_MEM, dev->d_i2c.cpu_addr, dev->d_i2c.dma_handle);
-	pci_free_consistent(dev->pci, SAA7146_RPS_MEM, dev->d_rps1.cpu_addr, dev->d_rps1.dma_handle);
-	pci_free_consistent(dev->pci, SAA7146_RPS_MEM, dev->d_rps0.cpu_addr, dev->d_rps0.dma_handle);
+	for (p = dev_map; p->addr; p++)
+		pci_free_consistent(pdev, SAA7146_RPS_MEM, p->addr, p->dma);
 
 	iounmap(dev->mem);
-	release_mem_region(pci_resource_start(dev->pci,0), pci_resource_len(dev->pci,0));
-
+	pci_release_region(pdev, 0);
 	list_del(&dev->item);
+	pci_disable_device(pdev);
 	kfree(dev);
 
 	saa7146_num--;

drivers/media/common/saa7146_fops.c

 #include <media/saa7146_vv.h>
+#include <linux/version.h>
 
 #define BOARD_CAN_DO_VBI(dev)   (dev->revision != 0 && dev->vv_data->vbi_minor != -1) 
 
@@ -32,17 +33,6 @@ int saa7146_res_get(struct saa7146_fh *fh, unsigned int bit)
 	return 1;
 }
 
-int saa7146_res_check(struct saa7146_fh *fh, unsigned int bit)
-{
-	return (fh->resources & bit);
-}
-
-int saa7146_res_locked(struct saa7146_dev *dev, unsigned int bit)
-{
-	struct saa7146_vv *vv = dev->vv_data;
-	return (vv->resources & bit);
-}
-
 void saa7146_res_free(struct saa7146_fh *fh, unsigned int bits)
 {
 	struct saa7146_dev *dev = fh->dev;

drivers/media/common/saa7146_hlp.c

@@ -9,11 +9,6 @@ static void calculate_output_format_register(struct saa7146_dev* saa, u32 palett
 	*clip_format |=  (( ((palette&0xf00)>>8) << 30) | ((palette&0x00f) << 24) | (((palette&0x0f0)>>4) << 16));
 }
 
-static void calculate_bcs_ctrl_register(struct saa7146_dev *dev, int brightness, int contrast, int colour, u32 *bcs_ctrl)
-{
-	*bcs_ctrl = ((brightness << 24) | (contrast << 16) | (colour <<  0));
-}
-
 static void calculate_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync, u32* hps_ctrl)
 {
 	*hps_ctrl &= ~(MASK_30 | MASK_31 | MASK_28);
@@ -62,7 +57,7 @@ static struct {
 };
 
 /* table of attenuation values for horizontal scaling */
-u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
+static u8 h_attenuation[] = { 1, 2, 4, 8, 2, 4, 8, 16, 0};
 
 /* calculate horizontal scale registers */
 static int calculate_h_scale_registers(struct saa7146_dev *dev,
@@ -208,7 +203,7 @@ static struct {
 };
 
 /* table of attenuation values for vertical scaling */
-u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
+static u16 v_attenuation[] = { 2, 4, 8, 16, 32, 64, 128, 256, 0};
 
 /* calculate vertical scale registers */
 static int calculate_v_scale_registers(struct saa7146_dev *dev, enum v4l2_field field,
@@ -620,18 +615,6 @@ static void saa7146_set_output_format(struct saa7146_dev *dev, unsigned long pal
       	saa7146_write(dev, MC2, (MASK_05 | MASK_21));
 }
 
-void saa7146_set_picture_prop(struct saa7146_dev *dev, int brightness, int contrast, int colour)
-{
-	u32	bcs_ctrl = 0;
-	
-	calculate_bcs_ctrl_register(dev, brightness, contrast, colour, &bcs_ctrl);
-	saa7146_write(dev, BCS_CTRL, bcs_ctrl);
-	
-	/* update the bcs register */
-      	saa7146_write(dev, MC2, (MASK_06 | MASK_22));
-}
-
-
 /* select input-source */
 void saa7146_set_hps_source_and_sync(struct saa7146_dev *dev, int source, int sync)
 {

drivers/media/common/saa7146_i2c.c

 #include <linux/version.h>
 #include <media/saa7146_vv.h>
 
-u32 saa7146_i2c_func(struct i2c_adapter *adapter)
+static u32 saa7146_i2c_func(struct i2c_adapter *adapter)
 {
 //fm	DEB_I2C(("'%s'.\n", adapter->name));
 

drivers/media/common/saa7146_vbi.c

@@ -130,7 +130,7 @@ static int vbi_workaround(struct saa7146_dev *dev)
 	return 0;
 }
 
-void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
+static void saa7146_set_vbi_capture(struct saa7146_dev *dev, struct saa7146_buf *buf, struct saa7146_buf *next)
 {
 	struct saa7146_vv *vv = dev->vv_data;
 

drivers/media/common/saa7146_video.c

@@ -2,7 +2,7 @@
 
 static int max_memory = 32;
 
-MODULE_PARM(max_memory,"i");
+module_param(max_memory, int, 0644);
 MODULE_PARM_DESC(max_memory, "maximum memory usage for capture buffers (default: 32Mb)");
 
 #define IS_CAPTURE_ACTIVE(fh) \

drivers/media/dvb/Kconfig

@@ -21,8 +21,6 @@ config DVB
 
 source "drivers/media/dvb/dvb-core/Kconfig"
 
-source "drivers/media/dvb/frontends/Kconfig"
-
 comment "Supported SAA7146 based PCI Adapters"
 	depends on DVB_CORE && PCI
 source "drivers/media/dvb/ttpci/Kconfig"
@@ -42,5 +40,8 @@ comment "Supported BT878 Adapters"
 	depends on DVB_CORE && PCI
 source "drivers/media/dvb/bt8xx/Kconfig"
 
-endmenu
+comment "Supported DVB Frontends"
+	depends on DVB_CORE
+source "drivers/media/dvb/frontends/Kconfig"
 
+endmenu

drivers/media/dvb/b2c2/Kconfig

 config DVB_B2C2_SKYSTAR
 	tristate "Technisat Skystar2 PCI"
 	depends on DVB_CORE && PCI
+	select DVB_STV0299
+	select DVB_MT352
 	help
 	  Support for the Skystar2 PCI DVB card by Technisat, which
 	  is equipped with the FlexCopII chipset by B2C2.

drivers/media/dvb/b2c2/Makefile

 obj-$(CONFIG_DVB_B2C2_SKYSTAR) += skystar2.o
 
-EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/

drivers/media/dvb/bt8xx/Kconfig

 config DVB_BT8XX
 	tristate "Nebula/Pinnacle PCTV/Twinhan PCI cards"
 	depends on DVB_CORE && PCI && VIDEO_BT848
+	select DVB_MT352
+	select DVB_SP887X
 	help
 	  Support for PCI cards based on the Bt8xx PCI bridge. Examples are
 	  the Nebula cards, the Pinnacle PCTV cards and Twinhan DST cards.

drivers/media/dvb/bt8xx/Makefile

 
-obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o
+obj-$(CONFIG_DVB_BT8XX) += bt878.o dvb-bt8xx.o dst.o
 
 EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/video -Idrivers/media/dvb/frontends
 

drivers/media/dvb/bt8xx/bt878.c

@@ -44,7 +44,7 @@
 #include "dmxdev.h"
 #include "dvbdev.h"
 #include "bt878.h"
-#include "dst-bt878.h"
+#include "dst_priv.h"
 
 
 /**************************************/
@@ -559,22 +559,11 @@ static struct pci_driver bt878_pci_driver = {
 
 static int bt878_pci_driver_registered = 0;
 
-/* This will be used later by dvb-bt8xx to only use the audio
- * dma of certain cards */
-int bt878_find_audio_dma(void)
-{
-	// pci_register_driver(&bt878_pci_driver);
-	bt878_pci_driver_registered = 1;
-	return 0;
-}
-
-EXPORT_SYMBOL(bt878_find_audio_dma);
-
 /*******************************/
 /* Module management functions */
 /*******************************/
 
-int bt878_init_module(void)
+static int bt878_init_module(void)
 {
 	bt878_num = 0;
 	bt878_pci_driver_registered = 0;
@@ -586,13 +575,13 @@ int bt878_init_module(void)
 /*
         bt878_check_chipset();
 */
-	/* later we register inside of bt878_find_audio_dma
+	/* later we register inside of bt878_find_audio_dma()
 	 * because we may want to ignore certain cards */
 	bt878_pci_driver_registered = 1;
 	return pci_module_init(&bt878_pci_driver);
 }
 
-void bt878_cleanup_module(void)
+static void bt878_cleanup_module(void)
 {
 	if (bt878_pci_driver_registered) {
 		bt878_pci_driver_registered = 0;
@@ -601,12 +590,10 @@ void bt878_cleanup_module(void)
 	return;
 }
 
-EXPORT_SYMBOL(bt878_init_module);
-EXPORT_SYMBOL(bt878_cleanup_module);
 module_init(bt878_init_module);
 module_exit(bt878_cleanup_module);
 
-
+//MODULE_AUTHOR("XXX");
 MODULE_LICENSE("GPL");
 
 /*

drivers/media/dvb/bt8xx/dst.h

+/*
+    Frontend-driver for TwinHan DST Frontend
+
+    Copyright (C) 2003 Jamie Honan
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License
+    along with this program; if not, write to the Free Software
+    Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+
+*/
+
+#ifndef DST_H
+#define DST_H
+
+#include <linux/dvb/frontend.h>
+#include <linux/device.h>
+#include "bt878.h"
+
+struct dst_config
+{
+	/* the demodulator's i2c address */
+	u8 demod_address;
+};
+
+extern struct dvb_frontend* dst_attach(const struct dst_config* config,
+				       struct i2c_adapter* i2c,
+				       struct bt878 *bt);
+
+#endif // DST_H

drivers/media/dvb/frontends/dst-bt878.h → drivers/media/dvb/bt8xx/dst_priv.h

@@ -30,7 +30,7 @@ union dst_gpio_packet {
 #define DST_IG_READ	2
 #define DST_IG_TS       3
 
-struct bt878 ;
+struct bt878;
 
 int bt878_device_control(struct bt878 *bt, unsigned int cmd, union dst_gpio_packet *mp);
 

drivers/media/dvb/bt8xx/dvb-bt8xx.h

@@ -26,6 +26,10 @@
 #include "dvbdev.h"
 #include "dvb_net.h"
 #include "bttv.h"
+#include "mt352.h"
+#include "sp887x.h"
+#include "dst.h"
+#include "nxt6000.h"
 
 struct dvb_bt8xx_card {
 	struct semaphore lock;
@@ -44,4 +48,5 @@ struct dvb_bt8xx_card {
 	struct i2c_adapter *i2c_adapter;
 	struct dvb_net dvbnet;
 				
+	struct dvb_frontend* fe;
 };

drivers/media/dvb/cinergyT2/Kconfig

@@ -23,8 +23,10 @@ config DVB_CINERGYT2_STREAM_URB_COUNT
 	depends on DVB_CINERGYT2_TUNING
         default "32"
 	help
-	  USB Request Blocks for Highspeed Stream transfers are queued in a
-	  for the Host Controller. Usually the default value is a safe choice.
+	  USB Request Blocks for Highspeed Stream transfers are scheduled in
+	  a queue for the Host Controller.
+
+	  Usually the default value is a safe choice.
 
 	  You may increase this number if you are using this device in a 
 	  Server Environment with many high-traffic USB Highspeed devices 
@@ -44,6 +46,21 @@ config DVB_CINERGYT2_STREAM_BUF_SIZE
 	  sharing the same USB bus.
 
 
+config DVB_CINERGYT2_QUERY_INTERVAL
+	int "Status update interval [milliseconds]"
+	depends on DVB_CINERGYT2_TUNING
+        default "250"
+	help
+	  This is the interval for status readouts from the demodulator.
+	  You may try lower values if you need more responsive signal quality
+	  measurements.
+
+	  Please keep in mind that these updates cause traffic on the tuner
+	  control bus and thus may or may not affect receiption sensitivity.
+
+	  The default value should be a safe choice for common applications.
+
+
 config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
 	bool "Register the onboard IR Remote Control Receiver as Input Device"
 	depends on DVB_CINERGYT2_TUNING
@@ -57,3 +74,12 @@ config DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
 	  source code to find out how to add support for other controls.
 
 
+config DVB_CINERGYT2_RC_QUERY_INTERVAL
+	int "Infrared Remote Controller update interval [milliseconds]"
+	depends on DVB_CINERGYT2_TUNING && DVB_CINERGYT2_ENABLE_RC_INPUT_DEVICE
+        default "100"
+	help
+	  If you have a very fast-repeating remote control you can try lower
+	  values, for normal consumer receivers the default value should be
+	  a safe choice.
+

drivers/media/dvb/dibusb/Kconfig

 config DVB_DIBUSB
-	tristate "DiBcom/Twinhan/KWorld/Hama/Artec/Compro USB DVB-T devices"
+	tristate "DiBcom USB DVB-T devices (see help for device list)"
 	depends on DVB_CORE && USB
 	select FW_LOADER
+	select DVB_DIB3000MB
 	help
-	  Support for USB 1.1 DVB-T devices based on a reference design made by
+	  Support for USB 1.1 and 2.0 DVB-T devices based on reference designs made by
 	  DiBcom (http://www.dibcom.fr).
 
 	  Devices supported by this driver:
@@ -15,19 +16,35 @@ config DVB_DIBUSB
 	    DiBcom reference device (non-public)
 	    Ultima Electronic/Artec T1 USB TVBOX
 	    Compro Videomate DVB-U2000 - DVB-T USB
+	    Grandtec DVB-T USB
+	    Avermedia AverTV DVBT USB
+	    Yakumo DVB-T mobile USB2.0
 
 	  The VP7041 seems to be identical to "CTS Portable" (Chinese
 	  Television System).
 
 	  These devices can be understood as budget ones, they "only" deliver
-	  the MPEG data.
+	  (a part of) the MPEG2 transport stream.
 
-	  Currently all known copies of the DiBcom reference design have the DiBcom 3000-MB 
-	  frontend onboard. Please enable and load this one manually in order to use this
-	  device.
-
-	  A firmware is needed to use the device. See Documentation/dvb/README.dibusb
+	  A firmware is needed to get the device working. See Documentation/dvb/README.dibusb
 	  details.
 
 	  Say Y if you own such a device and want to use it. You should build it as
 	  a module.
+
+config DVB_DIBUSB_MISDESIGNED_AN2235
+	bool "Enable support for some Artec T1 device, which identifies as AN2235"
+	depends on DVB_DIBUSB
+	help
+	  Somehow Artec forgot to program the eeprom for some of their T1 devices. So
+	  comes that they identify with the default Vendor and Product ID of the Cypress
+	  CY7C64613 (AN2235).
+
+	  Say Y if your Artec device has 0x0574 as Vendor ID and 0x2235 as Product ID.
+
+config DVB_DIBCOM_DEBUG
+	bool "Enable extended debug support for DiBcom USB device"
+	depends on DVB_DIBUSB
+	help
+	  Say Y if you want to enable debuging. See modinfo dvb-dibusb for
+	  debug level.

drivers/media/dvb/dibusb/Makefile

 obj-$(CONFIG_DVB_DIBUSB) += dvb-dibusb.o
 
-EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/
+EXTRA_CFLAGS = -Idrivers/media/dvb/dvb-core/ -Idrivers/media/dvb/frontends/

drivers/media/dvb/dvb-core/Makefile

@@ -4,6 +4,6 @@
 
 dvb-core-objs = dvbdev.o dmxdev.o dvb_demux.o dvb_filter.o \
 	        dvb_ca_en50221.o dvb_frontend.o \
-		dvb_net.o dvb_ksyms.o dvb_ringbuffer.o
+		dvb_net.o dvb_ringbuffer.o
 
 obj-$(CONFIG_DVB_CORE) += dvb-core.o

drivers/media/dvb/dvb-core/Makefile.lib

-obj-$(CONFIG_DVB_CORE)		+= crc32.o

drivers/media/dvb/dvb-core/dmxdev.c

@@ -42,18 +42,12 @@ MODULE_PARM_DESC(debug, "Turn on/off debugging (default:off).");
 
 #define dprintk	if (debug) printk
 
-inline struct dmxdev_filter *
+static inline struct dmxdev_filter *
 dvb_dmxdev_file_to_filter(struct file *file)
 {
 	return (struct dmxdev_filter *) file->private_data;
 }
 
-inline struct dmxdev_dvr *
-dvb_dmxdev_file_to_dvr(struct dmxdev *dmxdev, struct file *file)
-{
-	return (struct dmxdev_dvr *) file->private_data;
-}
-
 static inline void dvb_dmxdev_buffer_init(struct dmxdev_buffer *buffer) 
 {
 	buffer->data=NULL;
@@ -846,7 +840,7 @@ static ssize_t dvb_dmxdev_read_sec(struct dmxdev_filter *dfil,
 }
 
 
-ssize_t 
+static ssize_t
 dvb_demux_read(struct file *file, char __user *buf, size_t count, loff_t *ppos)
 {
 	struct dmxdev_filter *dmxdevfilter=dvb_dmxdev_file_to_filter(file);
@@ -1122,6 +1116,7 @@ dvb_dmxdev_init(struct dmxdev *dmxdev, struct dvb_adapter *dvb_adapter)
 
 	return 0;
 }
+EXPORT_SYMBOL(dvb_dmxdev_init);
 
 void 
 dvb_dmxdev_release(struct dmxdev *dmxdev)
@@ -1138,5 +1133,5 @@ dvb_dmxdev_release(struct dmxdev *dmxdev)
 	}
 	dmxdev->demux->close(dmxdev->demux);
 }
-
+EXPORT_SYMBOL(dvb_dmxdev_release);
 

drivers/media/dvb/dvb-core/dvb_ca_en50221.h

@@ -42,6 +42,9 @@
 /* Structure describing a CA interface */
 struct dvb_ca_en50221 {
 
+	/* the module owning this structure */
+	struct module* owner;
+
 	/* NOTE: the read_*, write_* and poll_slot_status functions must use locks as
 	 * they may be called from several threads at once */
 
@@ -62,7 +65,7 @@ struct dvb_ca_en50221 {
 	* Poll slot status.
 	* Only necessary if DVB_CA_FLAG_EN50221_IRQ_CAMCHANGE is not set
 	*/
-	int (*poll_slot_status)(struct dvb_ca_en50221* ca, int slot);
+	int (*poll_slot_status)(struct dvb_ca_en50221* ca, int slot, int open);
 
 	/* private data, used by caller */
 	void* data;

drivers/media/dvb/dvb-core/dvb_demux.c

@@ -424,7 +424,7 @@ void dvb_dmx_swfilter_packet(struct dvb_demux *demux, const u8 *buf)
 			feed->cb.ts(buf, 188, NULL, 0, &feed->feed.ts, DMX_OK);
 	}
 }
-
+EXPORT_SYMBOL(dvb_dmx_swfilter_packet);
 
 void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
@@ -439,6 +439,7 @@ void dvb_dmx_swfilter_packets(struct dvb_demux *demux, const u8 *buf, size_t cou
 
 	spin_unlock(&demux->lock);
 }
+EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
 
 
 void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
@@ -478,6 +479,7 @@ void dvb_dmx_swfilter(struct dvb_demux *demux, const u8 *buf, size_t count)
 bailout:
 	spin_unlock(&demux->lock);
 }
+EXPORT_SYMBOL(dvb_dmx_swfilter);
 
 void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 {
@@ -522,6 +524,7 @@ void dvb_dmx_swfilter_204(struct dvb_demux *demux, const u8 *buf, size_t count)
 bailout:
 	spin_unlock(&demux->lock);
 }
+EXPORT_SYMBOL(dvb_dmx_swfilter_204);
 
 
 static struct dvb_demux_filter * dvb_dmx_filter_alloc(struct dvb_demux *demux)
@@ -1163,6 +1166,7 @@ int dvbdmx_connect_frontend(struct dmx_demux *demux, struct dmx_frontend *fronte
 	up(&dvbdemux->mutex);
 	return 0;
 }
+EXPORT_SYMBOL(dvbdmx_connect_frontend);
 
 
 int dvbdmx_disconnect_frontend(struct dmx_demux *demux)
@@ -1176,6 +1180,7 @@ int dvbdmx_disconnect_frontend(struct dmx_demux *demux)
 	up(&dvbdemux->mutex);
 	return 0;
 }
+EXPORT_SYMBOL(dvbdmx_disconnect_frontend);
 
 
 static int dvbdmx_get_pes_pids(struct dmx_demux *demux, u16 *pids)
@@ -1256,6 +1261,7 @@ int dvb_dmx_init(struct dvb_demux *dvbdemux)
 
 	return 0;
 }
+EXPORT_SYMBOL(dvb_dmx_init);
 
 
 int dvb_dmx_release(struct dvb_demux *dvbdemux)
@@ -1269,3 +1275,5 @@ int dvb_dmx_release(struct dvb_demux *dvbdemux)
 		vfree(dvbdemux->feed);
 	return 0;
 }
+EXPORT_SYMBOL(dvb_dmx_release);
+

drivers/media/dvb/dvb-core/dvb_filter.c

@@ -3,19 +3,20 @@
 #include <linux/string.h>
 #include "dvb_filter.h"
 
-unsigned int bitrates[3][16] =
+#if 0
+static unsigned int bitrates[3][16] =
 {{0,32,64,96,128,160,192,224,256,288,320,352,384,416,448,0},
  {0,32,48,56,64,80,96,112,128,160,192,224,256,320,384,0},
  {0,32,40,48,56,64,80,96,112,128,160,192,224,256,320,0}};
+#endif
 
-u32 freq[4] = {441, 480, 320, 0};
+static u32 freq[4] = {480, 441, 320, 0};
 
-unsigned int ac3_bitrates[32] =
+static unsigned int ac3_bitrates[32] =
     {32,40,48,56,64,80,96,112,128,160,192,224,256,320,384,448,512,576,640,
      0,0,0,0,0,0,0,0,0,0,0,0,0};
 
-u32 ac3_freq[4] = {480, 441, 320, 0};
-u32 ac3_frames[3][32] =
+static u32 ac3_frames[3][32] =
     {{64,80,96,112,128,160,192,224,256,320,384,448,512,640,768,896,1024,
       1152,1280,0,0,0,0,0,0,0,0,0,0,0,0,0},
      {69,87,104,121,139,174,208,243,278,348,417,487,557,696,835,975,1114,
@@ -389,6 +390,7 @@ int dvb_filter_get_ac3info(u8 *mbuf, int count, struct dvb_audio_info *ai, int p
 
 	return 0;
 }
+EXPORT_SYMBOL(dvb_filter_get_ac3info);
 
 
 #if 0
@@ -563,6 +565,7 @@ void dvb_filter_pes2ts_init(struct dvb_filter_pes2ts *p2ts, unsigned short pid,
 	p2ts->cb=cb;
 	p2ts->priv=priv;
 }
+EXPORT_SYMBOL(dvb_filter_pes2ts_init);
 
 int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes,
 		      int len, int payload_start)
@@ -597,4 +600,5 @@ int dvb_filter_pes2ts(struct dvb_filter_pes2ts *p2ts, unsigned char *pes,
 	memcpy(buf+5+rest, pes, len);
 	return p2ts->cb(p2ts->priv, buf);
 }
+EXPORT_SYMBOL(dvb_filter_pes2ts);
 

drivers/media/dvb/dvb-core/dvb_ksyms.c

-#include <linux/errno.h>
-#include <linux/module.h>
-#include <linux/ioctl.h>
-#include <linux/slab.h>
-#include <linux/fs.h>
-#include <asm/uaccess.h>
-
-#include "dmxdev.h"
-#include "dvb_demux.h"
-#include "dvb_frontend.h"
-#include "dvb_net.h"
-#include "dvb_filter.h"
-#include "dvb_ca_en50221.h"
-
-EXPORT_SYMBOL(dvb_dmxdev_init);
-EXPORT_SYMBOL(dvb_dmxdev_release);
-EXPORT_SYMBOL(dvb_dmx_init);
-EXPORT_SYMBOL(dvb_dmx_release);
-EXPORT_SYMBOL(dvb_dmx_swfilter_packet);
-EXPORT_SYMBOL(dvb_dmx_swfilter_packets);
-EXPORT_SYMBOL(dvb_dmx_swfilter);
-EXPORT_SYMBOL(dvb_dmx_swfilter_204);
-EXPORT_SYMBOL(dvbdmx_connect_frontend);
-EXPORT_SYMBOL(dvbdmx_disconnect_frontend);
-
-EXPORT_SYMBOL(dvb_register_frontend);
-EXPORT_SYMBOL(dvb_unregister_frontend);
-EXPORT_SYMBOL(dvb_add_frontend_ioctls);
-EXPORT_SYMBOL(dvb_remove_frontend_ioctls);
-EXPORT_SYMBOL(dvb_add_frontend_notifier);
-EXPORT_SYMBOL(dvb_remove_frontend_notifier);
-
-EXPORT_SYMBOL(dvb_net_init);
-EXPORT_SYMBOL(dvb_net_release);
-
-EXPORT_SYMBOL(dvb_register_adapter);
-EXPORT_SYMBOL(dvb_unregister_adapter);
-EXPORT_SYMBOL(dvb_register_device);
-EXPORT_SYMBOL(dvb_unregister_device);
-EXPORT_SYMBOL(dvb_generic_ioctl);
-EXPORT_SYMBOL(dvb_generic_open);
-EXPORT_SYMBOL(dvb_generic_release);
-
-EXPORT_SYMBOL(dvb_filter_pes2ts_init);
-EXPORT_SYMBOL(dvb_filter_pes2ts);
-EXPORT_SYMBOL(dvb_filter_get_ac3info);
-
-EXPORT_SYMBOL(dvb_ca_en50221_init);
-EXPORT_SYMBOL(dvb_ca_en50221_release);
-EXPORT_SYMBOL(dvb_ca_en50221_frda_irq);
-EXPORT_SYMBOL(dvb_ca_en50221_camchange_irq);
-EXPORT_SYMBOL(dvb_ca_en50221_camready_irq);