Commit dd1cd4c6 authored by Johannes Berg's avatar Johannes Berg Committed by David S. Miller

[MAC80211]: print out wiphy name instead of master device

This makes mac80211 print out the wiphy name instead of the
master device name where appropriate.
Signed-off-by: default avatarJohannes Berg <johannes@sipsolutions.net>
Signed-off-by: default avatarMichael Wu <flamingice@sourmilk.net>
Signed-off-by: default avatarJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: default avatarDavid S. Miller <davem@davemloft.net>
parent 9c7d7728
......@@ -814,7 +814,7 @@ static void ieee80211_tasklet_handler(unsigned long data)
break;
default: /* should never get here! */
printk(KERN_ERR "%s: Unknown message type (%d)\n",
local->mdev->name, skb->pkt_type);
wiphy_name(local->hw.wiphy), skb->pkt_type);
dev_kfree_skb(skb);
break;
}
......@@ -904,7 +904,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
if (!status) {
printk(KERN_ERR
"%s: ieee80211_tx_status called with NULL status\n",
local->mdev->name);
wiphy_name(local->hw.wiphy));
dev_kfree_skb(skb);
return;
}
......@@ -961,7 +961,7 @@ void ieee80211_tx_status(struct ieee80211_hw *hw, struct sk_buff *skb,
printk(KERN_DEBUG "%s: dropped TX "
"filtered frame queue_len=%d "
"PS=%d @%lu\n",
local->mdev->name,
wiphy_name(local->hw.wiphy),
skb_queue_len(
&sta->tx_filtered),
!!(sta->flags & WLAN_STA_PS),
......@@ -1282,7 +1282,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
result = ieee80211_init_rate_ctrl_alg(local, NULL);
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize rate control "
"algorithm\n", local->mdev->name);
"algorithm\n", wiphy_name(local->hw.wiphy));
goto fail_rate;
}
......@@ -1290,7 +1290,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
if (result < 0) {
printk(KERN_DEBUG "%s: Failed to initialize wep\n",
local->mdev->name);
wiphy_name(local->hw.wiphy));
goto fail_wep;
}
......@@ -1301,7 +1301,7 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
IEEE80211_IF_TYPE_STA);
if (result)
printk(KERN_WARNING "%s: Failed to add default virtual iface\n",
local->mdev->name);
wiphy_name(local->hw.wiphy));
local->reg_state = IEEE80211_DEV_REGISTERED;
rtnl_unlock();
......@@ -1401,7 +1401,7 @@ void ieee80211_unregister_hw(struct ieee80211_hw *hw)
if (skb_queue_len(&local->skb_queue)
|| skb_queue_len(&local->skb_queue_unreliable))
printk(KERN_WARNING "%s: skb_queue not empty\n",
local->mdev->name);
wiphy_name(local->hw.wiphy));
skb_queue_purge(&local->skb_queue);
skb_queue_purge(&local->skb_queue_unreliable);
......
......@@ -152,7 +152,7 @@ int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
ref = rate_control_alloc(name, local);
if (!ref) {
printk(KERN_WARNING "%s: Failed to select rate control "
"algorithm\n", local->mdev->name);
"algorithm\n", wiphy_name(local->hw.wiphy));
return -ENOENT;
}
......@@ -164,7 +164,7 @@ int ieee80211_init_rate_ctrl_alg(struct ieee80211_local *local,
}
printk(KERN_DEBUG "%s: Selected rate control "
"algorithm '%s'\n", local->mdev->name,
"algorithm '%s'\n", wiphy_name(local->hw.wiphy),
ref->ops->name);
......
......@@ -3104,7 +3104,7 @@ struct sta_info * ieee80211_ibss_add_sta(struct net_device *dev,
}
printk(KERN_DEBUG "%s: Adding new IBSS station %s (dev=%s)\n",
local->mdev->name, print_mac(mac, addr), dev->name);
wiphy_name(local->hw.wiphy), print_mac(mac, addr), dev->name);
sta = sta_info_add(local, dev, addr, GFP_ATOMIC);
if (!sta)
......
......@@ -1474,7 +1474,8 @@ void __ieee80211_rx(struct ieee80211_hw *hw, struct sk_buff *skb,
if (net_ratelimit())
printk(KERN_DEBUG "%s: failed to copy "
"multicast frame for %s",
local->mdev->name, prev->dev->name);
wiphy_name(local->hw.wiphy),
prev->dev->name);
continue;
}
rx.skb = skb_new;
......
......@@ -166,7 +166,7 @@ struct sta_info * sta_info_add(struct ieee80211_local *local,
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: Added STA %s\n",
local->mdev->name, print_mac(mac, addr));
wiphy_name(local->hw.wiphy), print_mac(mac, addr));
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
#ifdef CONFIG_MAC80211_DEBUGFS
......@@ -226,7 +226,7 @@ void sta_info_free(struct sta_info *sta)
#ifdef CONFIG_MAC80211_VERBOSE_DEBUG
printk(KERN_DEBUG "%s: Removed STA %s\n",
local->mdev->name, print_mac(mac, sta->addr));
wiphy_name(local->hw.wiphy), print_mac(mac, sta->addr));
#endif /* CONFIG_MAC80211_VERBOSE_DEBUG */
ieee80211_key_free(sta->key);
......
......@@ -324,7 +324,7 @@ static void purge_old_ps_buffers(struct ieee80211_local *local)
local->total_ps_buffered = total;
printk(KERN_DEBUG "%s: PS buffers full - purged %d frames\n",
local->mdev->name, purged);
wiphy_name(local->hw.wiphy), purged);
}
static inline ieee80211_txrx_result
......@@ -1049,7 +1049,8 @@ static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb,
return IEEE80211_TX_AGAIN;
}
if (skb) {
ieee80211_dump_frame(local->mdev->name, "TX to low-level driver", skb);
ieee80211_dump_frame(wiphy_name(local->hw.wiphy),
"TX to low-level driver", skb);
ret = local->ops->tx(local_to_hw(local), skb, control);
if (ret)
return IEEE80211_TX_AGAIN;
......@@ -1077,7 +1078,7 @@ static int __ieee80211_tx(struct ieee80211_local *local, struct sk_buff *skb,
~IEEE80211_TXCTL_RATE_CTRL_PROBE;
}
ieee80211_dump_frame(local->mdev->name,
ieee80211_dump_frame(wiphy_name(local->hw.wiphy),
"TX to low-level driver",
tx->u.tx.extra_frag[i]);
ret = local->ops->tx(local_to_hw(local),
......@@ -1799,7 +1800,7 @@ struct sk_buff *ieee80211_beacon_get(struct ieee80211_hw *hw, int if_id,
if (!rate) {
if (net_ratelimit()) {
printk(KERN_DEBUG "%s: ieee80211_beacon_get: no rate "
"found\n", local->mdev->name);
"found\n", wiphy_name(local->hw.wiphy));
}
dev_kfree_skb(skb);
return NULL;
......
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment