ARM: omap3: Thumb-2 compatibility for sleep34xx.S

 * Build unconditionally as ARM for correct interoperation with
   OMAP firmware.

 * Fix an out-of-range ADR when building for ARM.

 * Remove deprecated PC-relative stores.

 * Add the required ENDPROC() directive for each ENTRY().

 * .align before data words.

 * Handle non-interworking return from v7_flush_dcache_all.
Signed-off-by: Dave Martin <dave.martin@linaro.org>
Signed-off-by: Kevin Hilman <khilman@ti.com>

arch/arm/mach-omap2/sleep34xx.S

@@ -64,6 +64,11 @@
 #define SDRC_DLLA_STATUS_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_STATUS)
 #define SDRC_DLLA_CTRL_V	OMAP34XX_SDRC_REGADDR(SDRC_DLLA_CTRL)
 
+/*
+ * This file needs be built unconditionally as ARM to interoperate correctly
+ * with non-Thumb-2-capable firmware.
+ */
+	.arm
 
 /*
  * API functions
@@ -82,6 +87,8 @@ ENTRY(get_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(get_restore_pointer)
+	.align
 ENTRY(get_restore_pointer_sz)
 	.word	. - get_restore_pointer
 
@@ -91,6 +98,8 @@ ENTRY(get_omap3630_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_3630
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(get_omap3630_restore_pointer)
+	.align
 ENTRY(get_omap3630_restore_pointer_sz)
 	.word	. - get_omap3630_restore_pointer
 
@@ -100,6 +109,8 @@ ENTRY(get_es3_restore_pointer)
 	stmfd	sp!, {lr}	@ save registers on stack
 	adr	r0, restore_es3
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(get_es3_restore_pointer)
+	.align
 ENTRY(get_es3_restore_pointer_sz)
 	.word	. - get_es3_restore_pointer
 
@@ -113,8 +124,10 @@ ENTRY(enable_omap3630_toggle_l2_on_restore)
 	stmfd	sp!, {lr}	@ save registers on stack
 	/* Setup so that we will disable and enable l2 */
 	mov	r1, #0x1
-	str	r1, l2dis_3630
+	adrl	r2, l2dis_3630	@ may be too distant for plain adr
+	str	r1, [r2]
 	ldmfd	sp!, {pc}	@ restore regs and return
+ENDPROC(enable_omap3630_toggle_l2_on_restore)
 
 	.text
 /* Function to call rom code to save secure ram context */
@@ -139,12 +152,14 @@ ENTRY(save_secure_ram_context)
 	nop
 	nop
 	ldmfd	sp!, {r1-r12, pc}
+	.align
 sram_phy_addr_mask:
 	.word	SRAM_BASE_P
 high_mask:
 	.word	0xffff
 api_params:
 	.word	0x4, 0x0, 0x0, 0x1, 0x1
+ENDPROC(save_secure_ram_context)
 ENTRY(save_secure_ram_context_sz)
 	.word	. - save_secure_ram_context
 
@@ -279,8 +294,18 @@ clean_l2:
 	 *  - 'might' have to copy address, load and jump to it
 	 */
 	ldr	r1, kernel_flush
-	mov	lr, pc
-	bx	r1
+	blx	r1
+	/*
+	 * The kernel doesn't interwork: v7_flush_dcache_all in particluar will
+	 * always return in Thumb state when CONFIG_THUMB2_KERNEL is enabled.
+	 * This sequence switches back to ARM.  Note that .align may insert a
+	 * nop: bx pc needs to be word-aligned in order to work.
+	 */
+ THUMB(	.thumb		)
+ THUMB(	.align		)
+ THUMB(	bx	pc	)
+ THUMB(	nop		)
+	.arm
 
 omap3_do_wfi:
 	ldr	r4, sdrc_power		@ read the SDRC_POWER register
@@ -438,6 +463,7 @@ skipl2dis:
 #endif
 	b	logic_l1_restore
 
+	.align
 l2_inv_api_params:
 	.word	0x1, 0x00
 l2_inv_gp:
@@ -607,6 +633,7 @@ usettbr0:
 
 /* This function implements the erratum ID i443 WA, applies to 34xx >= ES3.0 */
 	.text
+	.align	3
 ENTRY(es3_sdrc_fix)
 	ldr	r4, sdrc_syscfg		@ get config addr
 	ldr	r5, [r4]		@ get value
@@ -634,6 +661,7 @@ ENTRY(es3_sdrc_fix)
 	str	r5, [r4]		@ kick off refreshes
 	bx	lr
 
+	.align
 sdrc_syscfg:
 	.word	SDRC_SYSCONFIG_P
 sdrc_mr_0:
@@ -648,6 +676,7 @@ sdrc_emr2_1:
 	.word	SDRC_EMR2_1_P
 sdrc_manual_1:
 	.word	SDRC_MANUAL_1_P
+ENDPROC(es3_sdrc_fix)
 ENTRY(es3_sdrc_fix_sz)
 	.word	. - es3_sdrc_fix
 
@@ -682,6 +711,12 @@ wait_sdrc_ready:
 	bic	r5, r5, #0x40
 	str	r5, [r4]
 
+/*
+ * PC-relative stores lead to undefined behaviour in Thumb-2: use a r7 as a
+ * base instead.
+ * Be careful not to clobber r7 when maintaing this code.
+ */
+
 is_dll_in_lock_mode:
 	/* Is dll in lock mode? */
 	ldr	r4, sdrc_dlla_ctrl
@@ -689,10 +724,11 @@ is_dll_in_lock_mode:
 	tst	r5, #0x4
 	bxne	lr			@ Return if locked
 	/* wait till dll locks */
+	adr	r7, kick_counter
 wait_dll_lock_timed:
 	ldr	r4, wait_dll_lock_counter
 	add	r4, r4, #1
-	str	r4, wait_dll_lock_counter
+	str	r4, [r7, #wait_dll_lock_counter - kick_counter]
 	ldr	r4, sdrc_dlla_status
 	/* Wait 20uS for lock */
 	mov	r6, #8
@@ -718,9 +754,10 @@ kick_dll:
 	dsb
 	ldr	r4, kick_counter
 	add	r4, r4, #1
-	str	r4, kick_counter
+	str	r4, [r7]		@ kick_counter
 	b	wait_dll_lock_timed
 
+	.align
 cm_idlest1_core:
 	.word	CM_IDLEST1_CORE_V
 cm_idlest_ckgen:
@@ -763,6 +800,7 @@ kick_counter:
 	.word	0
 wait_dll_lock_counter:
 	.word	0
+ENDPROC(omap34xx_cpu_suspend)
 
 ENTRY(omap34xx_cpu_suspend_sz)
 	.word	. - omap34xx_cpu_suspend