USB: ohci whitespace/comment fixups

This is an OHCI cleanup patch ... it removes a lot of erroneous whitespace
(space before tab, at end of line) as well as the obsolete inline changelog.
Signed-off-by: David Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>

drivers/usb/host/ohci-at91.c

@@ -221,7 +221,7 @@ static const struct hc_driver ohci_at91_hc_driver = {
 	 */
 	.start =		ohci_at91_start,
 	.stop =			ohci_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources

drivers/usb/host/ohci-au1xxx.c

@@ -269,7 +269,7 @@ static const struct hc_driver ohci_au1xxx_hc_driver = {
 	 */
 	.start =		ohci_au1xxx_start,
 	.stop =			ohci_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources
@@ -336,7 +336,7 @@ static int ohci_hcd_au1xxx_drv_resume(struct platform_device *dev)
 static struct platform_driver ohci_hcd_au1xxx_driver = {
 	.probe		= ohci_hcd_au1xxx_drv_probe,
 	.remove		= ohci_hcd_au1xxx_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 	/*.suspend	= ohci_hcd_au1xxx_drv_suspend, */
 	/*.resume	= ohci_hcd_au1xxx_drv_resume, */
 	.driver		= {

drivers/usb/host/ohci-dbg.c

@@ -16,7 +16,7 @@
 	case PIPE_CONTROL:	temp = "ctrl"; break; \
 	case PIPE_BULK:		temp = "bulk"; break; \
 	case PIPE_INTERRUPT:	temp = "intr"; break; \
-	default: 		temp = "isoc"; break; \
+	default:		temp = "isoc"; break; \
 	}; temp;})
 #define pipestring(pipe) edstring(usb_pipetype(pipe))
 
@@ -205,13 +205,13 @@ ohci_dump_status (struct ohci_hcd *controller, char **next, unsigned *size)
 		(temp & RH_PS_PSSC) ? " PSSC" : "", \
 		(temp & RH_PS_PESC) ? " PESC" : "", \
 		(temp & RH_PS_CSC) ? " CSC" : "", \
- 		\
+		\
 		(temp & RH_PS_LSDA) ? " LSDA" : "", \
 		(temp & RH_PS_PPS) ? " PPS" : "", \
 		(temp & RH_PS_PRS) ? " PRS" : "", \
 		(temp & RH_PS_POCI) ? " POCI" : "", \
 		(temp & RH_PS_PSS) ? " PSS" : "", \
- 		\
+		\
 		(temp & RH_PS_PES) ? " PES" : "", \
 		(temp & RH_PS_CCS) ? " CCS" : "" \
 		);
@@ -563,7 +563,7 @@ show_periodic (struct class_device *class_dev, char *buf)
 					(info & ED_SKIP) ? " K" : "",
 					(ed->hwHeadP &
 						cpu_to_hc32(ohci, ED_H)) ?
- 							" H" : "");
+							" H" : "");
 				size -= temp;
 				next += temp;
 

drivers/usb/host/ohci-ep93xx.c

@@ -204,7 +204,7 @@ static int ohci_hcd_ep93xx_drv_resume(struct platform_device *pdev)
 static struct platform_driver ohci_hcd_ep93xx_driver = {
 	.probe		= ohci_hcd_ep93xx_drv_probe,
 	.remove		= ohci_hcd_ep93xx_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 #ifdef CONFIG_PM
 	.suspend	= ohci_hcd_ep93xx_drv_suspend,
 	.resume		= ohci_hcd_ep93xx_drv_resume,

drivers/usb/host/ohci-hcd.c

@@ -3,77 +3,21 @@
  *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- * 
+ *
  * [ Initialisation is based on Linus'  ]
  * [ uhci code and gregs ohci fragments ]
  * [ (C) Copyright 1999 Linus Torvalds  ]
  * [ (C) Copyright 1999 Gregory P. Smith]
- * 
- * 
+ *
+ *
  * OHCI is the main "non-Intel/VIA" standard for USB 1.1 host controller
  * interfaces (though some non-x86 Intel chips use it).  It supports
  * smarter hardware than UHCI.  A download link for the spec available
  * through the http://www.usb.org website.
  *
- * History:
- * 
- * 2004/03/24 LH7A404 support (Durgesh Pattamatta & Marc Singer)
- * 2004/02/04 use generic dma_* functions instead of pci_* (dsaxena@plexity.net)
- * 2003/02/24 show registers in sysfs (Kevin Brosius)
- *
- * 2002/09/03 get rid of ed hashtables, rework periodic scheduling and
- * 	bandwidth accounting; if debugging, show schedules in driverfs
- * 2002/07/19 fixes to management of ED and schedule state.
- * 2002/06/09 SA-1111 support (Christopher Hoover)
- * 2002/06/01 remember frame when HC won't see EDs any more; use that info
- *	to fix urb unlink races caused by interrupt latency assumptions;
- *	minor ED field and function naming updates
- * 2002/01/18 package as a patch for 2.5.3; this should match the
- *	2.4.17 kernel modulo some bugs being fixed.
- *
- * 2001/10/18 merge pmac cleanup (Benjamin Herrenschmidt) and bugfixes
- *	from post-2.4.5 patches.
- * 2001/09/20 URB_ZERO_PACKET support; hcca_dma portability, OPTi warning
- * 2001/09/07 match PCI PM changes, errnos from Linus' tree
- * 2001/05/05 fork 2.4.5 version into "hcd" framework, cleanup, simplify;
- *	pbook pci quirks gone (please fix pbook pci sw!) (db)
- *
- * 2001/04/08 Identify version on module load (gb)
- * 2001/03/24 td/ed hashing to remove bus_to_virt (Steve Longerbeam);
- 	pci_map_single (db)
- * 2001/03/21 td and dev/ed allocation uses new pci_pool API (db)
- * 2001/03/07 hcca allocation uses pci_alloc_consistent (Steve Longerbeam)
- *
- * 2000/09/26 fixed races in removing the private portion of the urb
- * 2000/09/07 disable bulk and control lists when unlinking the last
- *	endpoint descriptor in order to avoid unrecoverable errors on
- *	the Lucent chips. (rwc@sgi)
- * 2000/08/29 use bandwidth claiming hooks (thanks Randy!), fix some
- *	urb unlink probs, indentation fixes
- * 2000/08/11 various oops fixes mostly affecting iso and cleanup from
- *	device unplugs.
- * 2000/06/28 use PCI hotplug framework, for better power management
- *	and for Cardbus support (David Brownell)
- * 2000/earlier:  fixes for NEC/Lucent chips; suspend/resume handling
- *	when the controller loses power; handle UE; cleanup; ...
- *
- * v5.2 1999/12/07 URB 3rd preview, 
- * v5.1 1999/11/30 URB 2nd preview, cpia, (usb-scsi)
- * v5.0 1999/11/22 URB Technical preview, Paul Mackerras powerbook susp/resume 
- * 	i386: HUB, Keyboard, Mouse, Printer 
- *
- * v4.3 1999/10/27 multiple HCs, bulk_request
- * v4.2 1999/09/05 ISO API alpha, new dev alloc, neg Error-codes
- * v4.1 1999/08/27 Randy Dunlap's - ISO API first impl.
- * v4.0 1999/08/18 
- * v3.0 1999/06/25 
- * v2.1 1999/05/09  code clean up
- * v2.0 1999/05/04 
- * v1.0 1999/04/27 initial release
- *
  * This file is licenced under the GPL.
  */
- 
+
 #include <linux/module.h>
 #include <linux/moduleparam.h>
 #include <linux/pci.h>
@@ -89,7 +33,7 @@
 #include <linux/list.h>
 #include <linux/usb.h>
 #include <linux/usb/otg.h>
-#include <linux/dma-mapping.h> 
+#include <linux/dma-mapping.h>
 #include <linux/dmapool.h>
 #include <linux/reboot.h>
 
@@ -183,11 +127,11 @@ static int ohci_urb_enqueue (
 	int		i, size = 0;
 	unsigned long	flags;
 	int		retval = 0;
-	
+
 #ifdef OHCI_VERBOSE_DEBUG
 	urb_print (urb, "SUB", usb_pipein (pipe));
 #endif
-	
+
 	/* every endpoint has a ed, locate and maybe (re)initialize it */
 	if (! (ed = ed_get (ohci, ep, urb->dev, pipe, urb->interval)))
 		return -ENOMEM;
@@ -232,7 +176,7 @@ static int ohci_urb_enqueue (
 	memset (urb_priv, 0, sizeof (urb_priv_t) + size * sizeof (struct td *));
 	INIT_LIST_HEAD (&urb_priv->pending);
 	urb_priv->length = size;
-	urb_priv->ed = ed;	
+	urb_priv->ed = ed;
 
 	/* allocate the TDs (deferring hash chain updates) */
 	for (i = 0; i < size; i++) {
@@ -242,7 +186,7 @@ static int ohci_urb_enqueue (
 			urb_free_priv (ohci, urb_priv);
 			return -ENOMEM;
 		}
-	}	
+	}
 
 	spin_lock_irqsave (&ohci->lock, flags);
 
@@ -313,13 +257,13 @@ static int ohci_urb_dequeue (struct usb_hcd *hcd, struct urb *urb)
 {
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 	unsigned long		flags;
-	
+
 #ifdef OHCI_VERBOSE_DEBUG
 	urb_print (urb, "UNLINK", 1);
-#endif		  
+#endif
 
 	spin_lock_irqsave (&ohci->lock, flags);
- 	if (HC_IS_RUNNING(hcd->state)) {
+	if (HC_IS_RUNNING(hcd->state)) {
 		urb_priv_t  *urb_priv;
 
 		/* Unless an IRQ completed the unlink while it was being
@@ -512,11 +456,11 @@ static int ohci_init (struct ohci_hcd *ohci)
 
 /* Start an OHCI controller, set the BUS operational
  * resets USB and controller
- * enable interrupts 
+ * enable interrupts
  */
 static int ohci_run (struct ohci_hcd *ohci)
 {
-  	u32			mask, temp;
+	u32			mask, temp;
 	int			first = ohci->fminterval == 0;
 	struct usb_hcd		*hcd = ohci_to_hcd(ohci);
 
@@ -534,7 +478,7 @@ static int ohci_run (struct ohci_hcd *ohci)
 		/* also: power/overcurrent flags in roothub.a */
 	}
 
-  	/* Reset USB nearly "by the book".  RemoteWakeupConnected was
+	/* Reset USB nearly "by the book".  RemoteWakeupConnected was
 	 * saved if boot firmware (BIOS/SMM/...) told us it's connected,
 	 * or if bus glue did the same (e.g. for PCI add-in cards with
 	 * PCI PM support).
@@ -765,9 +709,9 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 		dl_done_list (ohci);
 		spin_unlock (&ohci->lock);
 		if (HC_IS_RUNNING(hcd->state))
-			ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable); 
+			ohci_writel (ohci, OHCI_INTR_WDH, &regs->intrenable);
 	}
-  
+
 	/* could track INTR_SO to reduce available PCI/... bandwidth */
 
 	/* handle any pending URB/ED unlinks, leaving INTR_SF enabled
@@ -778,12 +722,12 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 		finish_unlinks (ohci, ohci_frame_no(ohci));
 	if ((ints & OHCI_INTR_SF) != 0 && !ohci->ed_rm_list
 			&& HC_IS_RUNNING(hcd->state))
-		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);	
+		ohci_writel (ohci, OHCI_INTR_SF, &regs->intrdisable);
 	spin_unlock (&ohci->lock);
 
 	if (HC_IS_RUNNING(hcd->state)) {
 		ohci_writel (ohci, ints, &regs->intrstatus);
-		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);	
+		ohci_writel (ohci, OHCI_INTR_MIE, &regs->intrenable);
 		// flush those writes
 		(void) ohci_readl (ohci, &ohci->regs->control);
 	}
@@ -794,7 +738,7 @@ static irqreturn_t ohci_irq (struct usb_hcd *hcd)
 /*-------------------------------------------------------------------------*/
 
 static void ohci_stop (struct usb_hcd *hcd)
-{	
+{
 	struct ohci_hcd		*ohci = hcd_to_ohci (hcd);
 
 	ohci_dbg (ohci, "stop %s controller (state 0x%02x)\n",
@@ -812,8 +756,8 @@ static void ohci_stop (struct usb_hcd *hcd)
 	remove_debug_files (ohci);
 	ohci_mem_cleanup (ohci);
 	if (ohci->hcca) {
-		dma_free_coherent (hcd->self.controller, 
-				sizeof *ohci->hcca, 
+		dma_free_coherent (hcd->self.controller,
+				sizeof *ohci->hcca,
 				ohci->hcca, ohci->hcca_dma);
 		ohci->hcca = NULL;
 		ohci->hcca_dma = 0;
@@ -836,7 +780,7 @@ static int ohci_restart (struct ohci_hcd *ohci)
 	 * recycle any "live" eds/tds (and urbs) right away.
 	 * later, khubd disconnect processing will recycle the other state,
 	 * (either as disconnect/reconnect, or maybe someday as a reset).
-	 */ 
+	 */
 	spin_lock_irq(&ohci->lock);
 	disable (ohci);
 	usb_root_hub_lost_power(ohci_to_hcd(ohci)->self.root_hub);
@@ -875,11 +819,11 @@ static int ohci_restart (struct ohci_hcd *ohci)
 	/* empty the interrupt branches */
 	for (i = 0; i < NUM_INTS; i++) ohci->load [i] = 0;
 	for (i = 0; i < NUM_INTS; i++) ohci->hcca->int_table [i] = 0;
-	
+
 	/* no EDs to remove */
 	ohci->ed_rm_list = NULL;
 
-	/* empty control and bulk lists */	 
+	/* empty control and bulk lists */
 	ohci->ed_controltail = NULL;
 	ohci->ed_bulktail    = NULL;
 

drivers/usb/host/ohci-hub.c

 /*
  * OHCI HCD (Host Controller Driver) for USB.
- * 
+ *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2004 David Brownell <dbrownell@users.sourceforge.net>
- * 
+ *
  * This file is licenced under GPL
  */
 
@@ -23,13 +23,13 @@
 		(temp & RH_PS_PSSC) ? " PSSC" : "", \
 		(temp & RH_PS_PESC) ? " PESC" : "", \
 		(temp & RH_PS_CSC) ? " CSC" : "", \
- 		\
+		\
 		(temp & RH_PS_LSDA) ? " LSDA" : "", \
 		(temp & RH_PS_PPS) ? " PPS" : "", \
 		(temp & RH_PS_PRS) ? " PRS" : "", \
 		(temp & RH_PS_POCI) ? " POCI" : "", \
 		(temp & RH_PS_PSS) ? " PSS" : "", \
- 		\
+		\
 		(temp & RH_PS_PES) ? " PES" : "", \
 		(temp & RH_PS_CCS) ? " CCS" : "" \
 		);
@@ -484,7 +484,7 @@ ohci_hub_descriptor (
 	temp = 0;
 	if (rh & RH_A_NPS)		/* no power switching? */
 	    temp |= 0x0002;
-	if (rh & RH_A_PSM) 		/* per-port power switching? */
+	if (rh & RH_A_PSM)		/* per-port power switching? */
 	    temp |= 0x0001;
 	if (rh & RH_A_NOCP)		/* no overcurrent reporting? */
 	    temp |= 0x0010;
@@ -573,7 +573,7 @@ static inline void root_port_reset (struct ohci_hcd *ohci, unsigned port)
 			if (!(temp & RH_PS_PRS))
 				break;
 			udelay (500);
-		} 
+		}
 
 		if (!(temp & RH_PS_CCS))
 			break;

drivers/usb/host/ohci-lh7a404.c

@@ -38,7 +38,7 @@ static void lh7a404_start_hc(struct platform_device *dev)
 	CSC_PWRCNT |= CSC_PWRCNT_USBH_EN; /* Enable clock */
 	udelay(1000);
 	USBH_CMDSTATUS = OHCI_HCR;
-	
+
 	printk(KERN_DEBUG __FILE__
 		   ": Clock to USB host has been enabled \n");
 }
@@ -89,7 +89,7 @@ int usb_hcd_lh7a404_probe (const struct hc_driver *driver,
 		retval = -EBUSY;
 		goto err1;
 	}
-	
+
 	hcd->regs = ioremap(hcd->rsrc_start, hcd->rsrc_len);
 	if (!hcd->regs) {
 		pr_debug("ioremap failed");
@@ -174,7 +174,7 @@ static const struct hc_driver ohci_lh7a404_hc_driver = {
 	 */
 	.start =		ohci_lh7a404_start,
 	.stop =			ohci_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources
@@ -242,7 +242,7 @@ static int ohci_hcd_lh7a404_drv_resume(struct platform_device *dev)
 static struct platform_driver ohci_hcd_lh7a404_driver = {
 	.probe		= ohci_hcd_lh7a404_drv_probe,
 	.remove		= ohci_hcd_lh7a404_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 	/*.suspend	= ohci_hcd_lh7a404_drv_suspend, */
 	/*.resume	= ohci_hcd_lh7a404_drv_resume, */
 	.driver		= {

drivers/usb/host/ohci-mem.c

 /*
  * OHCI HCD (Host Controller Driver) for USB.
- * 
+ *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * 
+ *
  * This file is licenced under the GPL.
  */
 
 /*-------------------------------------------------------------------------*/
 
 /*
- * There's basically three types of memory:
+ * OHCI deals with three types of memory:
  *	- data used only by the HCD ... kmalloc is fine
  *	- async and periodic schedules, shared by HC and HCD ... these
  *	  need to use dma_pool or dma_alloc_coherent
  *	- driver buffers, read/written by HC ... the hcd glue or the
  *	  device driver provides us with dma addresses
  *
- * There's also PCI "register" data, which is memory mapped.
- * No memory seen by this driver is pagable.
+ * There's also "register" data, which is memory mapped.
+ * No memory seen by this driver (or any HCD) may be paged out.
  */
 
 /*-------------------------------------------------------------------------*/

drivers/usb/host/ohci-omap.c

@@ -447,7 +447,7 @@ static const struct hc_driver ohci_omap_hc_driver = {
 	.reset =		ohci_omap_init,
 	.start =		ohci_omap_start,
 	.stop =			ohci_omap_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources
@@ -533,7 +533,7 @@ static int ohci_omap_resume(struct platform_device *dev)
 static struct platform_driver ohci_hcd_omap_driver = {
 	.probe		= ohci_hcd_omap_drv_probe,
 	.remove		= ohci_hcd_omap_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 #ifdef	CONFIG_PM
 	.suspend	= ohci_omap_suspend,
 	.resume		= ohci_omap_resume,

drivers/usb/host/ohci-pci.c

@@ -3,17 +3,17 @@
  *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * 
+ *
  * [ Initialisation is based on Linus'  ]
  * [ uhci code and gregs ohci fragments ]
  * [ (C) Copyright 1999 Linus Torvalds  ]
  * [ (C) Copyright 1999 Gregory P. Smith]
- * 
+ *
  * PCI Bus Glue
  *
  * This file is licenced under the GPL.
  */
- 
+
 #ifndef CONFIG_PCI
 #error "This file is PCI bus glue.  CONFIG_PCI must be defined."
 #endif
@@ -83,7 +83,7 @@ ohci_pci_start (struct usb_hcd *hcd)
 			pci_dev_put(b);
 		}
 
-		/* Check for Compaq's ZFMicro chipset, which needs short 
+		/* Check for Compaq's ZFMicro chipset, which needs short
 		 * delays before control or bulk queues get re-activated
 		 * in finish_unlinks()
 		 */
@@ -238,8 +238,8 @@ static struct pci_driver ohci_pci_driver = {
 	.shutdown =	usb_hcd_pci_shutdown,
 };
 
- 
-static int __init ohci_hcd_pci_init (void) 
+
+static int __init ohci_hcd_pci_init (void)
 {
 	printk (KERN_DEBUG "%s: " DRIVER_INFO " (PCI)\n", hcd_name);
 	if (usb_disabled())
@@ -253,8 +253,8 @@ module_init (ohci_hcd_pci_init);
 
 /*-------------------------------------------------------------------------*/
 
-static void __exit ohci_hcd_pci_cleanup (void) 
-{	
+static void __exit ohci_hcd_pci_cleanup (void)
+{
 	pci_unregister_driver (&ohci_pci_driver);
 }
 module_exit (ohci_hcd_pci_cleanup);

drivers/usb/host/ohci-pnx4008.c

@@ -4,7 +4,7 @@
  * driver for Philips PNX4008 USB Host
  *
  * Authors: Dmitry Chigirev <source@mvista.com>
- * 	    Vitaly Wool <vitalywool@gmail.com>
+ *	    Vitaly Wool <vitalywool@gmail.com>
  *
  * register initialization is based on code examples provided by Philips
  * Copyright (c) 2005 Koninklijke Philips Electronics N.V.
@@ -29,7 +29,7 @@
 #include <asm/arch/irqs.h>
 #include <asm/arch/gpio.h>
 
-#define USB_CTRL 	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
+#define USB_CTRL	IO_ADDRESS(PNX4008_PWRMAN_BASE + 0x64)
 
 /* USB_CTRL bit defines */
 #define USB_SLAVE_HCLK_EN	(1 << 24)

drivers/usb/host/ohci-ppc-soc.c

@@ -5,7 +5,7 @@
  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
  * (C) Copyright 2002 Hewlett-Packard Company
  * (C) Copyright 2003-2005 MontaVista Software Inc.
- * 
+ *
  * Bus Glue for PPC On-Chip OHCI driver
  * Tested on Freescale MPC5200 and IBM STB04xxx
  *
@@ -85,7 +85,7 @@ static int usb_hcd_ppc_soc_probe(const struct hc_driver *driver,
  err2:
 	release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
  err1:
- 	usb_put_hcd(hcd);
+	usb_put_hcd(hcd);
 	return retval;
 }
 
@@ -148,7 +148,7 @@ static const struct hc_driver ohci_ppc_soc_hc_driver = {
 	 */
 	.start =		ohci_ppc_soc_start,
 	.stop =			ohci_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources
@@ -197,7 +197,7 @@ static int ohci_hcd_ppc_soc_drv_remove(struct platform_device *pdev)
 static struct platform_driver ohci_hcd_ppc_soc_driver = {
 	.probe		= ohci_hcd_ppc_soc_drv_probe,
 	.remove		= ohci_hcd_ppc_soc_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 #ifdef	CONFIG_PM
 	/*.suspend	= ohci_hcd_ppc_soc_drv_suspend,*/
 	/*.resume	= ohci_hcd_ppc_soc_drv_resume,*/

drivers/usb/host/ohci-pxa27x.c

@@ -47,7 +47,7 @@ static int pxa27x_ohci_select_pmm( int mode )
 	switch ( mode ) {
 	case PMM_NPS_MODE:
 		UHCRHDA |= RH_A_NPS;
-		break; 
+		break;
 	case PMM_GLOBAL_MODE:
 		UHCRHDA &= ~(RH_A_NPS & RH_A_PSM);
 		break;
@@ -60,7 +60,7 @@ static int pxa27x_ohci_select_pmm( int mode )
 		break;
 	default:
 		printk( KERN_ERR
-			"Invalid mode %d, set to non-power switch mode.\n", 
+			"Invalid mode %d, set to non-power switch mode.\n",
 			mode );
 
 		UHCRHDA |= RH_A_NPS;
@@ -270,7 +270,7 @@ static const struct hc_driver ohci_pxa27x_hc_driver = {
 	 */
 	.start =		ohci_pxa27x_start,
 	.stop =			ohci_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources
@@ -359,9 +359,9 @@ static int ohci_hcd_pxa27x_drv_resume(struct platform_device *pdev)
 static struct platform_driver ohci_hcd_pxa27x_driver = {
 	.probe		= ohci_hcd_pxa27x_drv_probe,
 	.remove		= ohci_hcd_pxa27x_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 #ifdef CONFIG_PM
-	.suspend	= ohci_hcd_pxa27x_drv_suspend, 
+	.suspend	= ohci_hcd_pxa27x_drv_suspend,
 	.resume		= ohci_hcd_pxa27x_drv_resume,
 #endif
 	.driver		= {

drivers/usb/host/ohci-s3c2410.c

@@ -447,7 +447,7 @@ static const struct hc_driver ohci_s3c2410_hc_driver = {
 	 */
 	.start =		ohci_s3c2410_start,
 	.stop =			ohci_stop,
-	.shutdown = 		ohci_shutdown,
+	.shutdown =		ohci_shutdown,
 
 	/*
 	 * managing i/o requests and associated device resources
@@ -492,7 +492,7 @@ static int ohci_hcd_s3c2410_drv_remove(struct platform_device *pdev)
 static struct platform_driver ohci_hcd_s3c2410_driver = {
 	.probe		= ohci_hcd_s3c2410_drv_probe,
 	.remove		= ohci_hcd_s3c2410_drv_remove,
-	.shutdown 	= usb_hcd_platform_shutdown,
+	.shutdown	= usb_hcd_platform_shutdown,
 	/*.suspend	= ohci_hcd_s3c2410_drv_suspend, */
 	/*.resume	= ohci_hcd_s3c2410_drv_resume, */
 	.driver		= {

drivers/usb/host/ohci-sa1111.c

@@ -4,7 +4,7 @@
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
  * (C) Copyright 2002 Hewlett-Packard Company
- * 
+ *
  * SA1111 Bus Glue
  *
  * Written by Christopher Hoover <ch@hpl.hp.com>
@@ -12,7 +12,7 @@
  *
  * This file is licenced under the GPL.
  */
- 
+
 #include <asm/hardware.h>
 #include <asm/mach-types.h>
 #include <asm/arch/assabet.h>
@@ -31,7 +31,7 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst = 0;
 
-	printk(KERN_DEBUG __FILE__ 
+	printk(KERN_DEBUG __FILE__
 	       ": starting SA-1111 OHCI USB Controller\n");
 
 #ifdef CONFIG_SA1100_BADGE4
@@ -65,7 +65,7 @@ static void sa1111_start_hc(struct sa1111_dev *dev)
 static void sa1111_stop_hc(struct sa1111_dev *dev)
 {
 	unsigned int usb_rst;
-	printk(KERN_DEBUG __FILE__ 
+	printk(KERN_DEBUG __FILE__
 	       ": stopping SA-1111 OHCI USB Controller\n");
 
 	/*

drivers/usb/host/ohci.h

 /*
  * OHCI HCD (Host Controller Driver) for USB.
- * 
+ *
  * (C) Copyright 1999 Roman Weissgaerber <weissg@vienna.at>
  * (C) Copyright 2000-2002 David Brownell <dbrownell@users.sourceforge.net>
- * 
+ *
  * This file is licenced under the GPL.
  */
 
@@ -14,7 +14,7 @@
  */
 typedef __u32 __bitwise __hc32;
 typedef __u16 __bitwise __hc16;
- 
+
 /*
  * OHCI Endpoint Descriptor (ED) ... holds TD queue
  * See OHCI spec, section 4.2
@@ -24,7 +24,7 @@ typedef __u16 __bitwise __hc16;
  */
 struct ed {
 	/* first fields are hardware-specified */
-	__hc32			hwINFO;       	/* endpoint config bitmap */
+	__hc32			hwINFO;      /* endpoint config bitmap */
 	/* info bits defined by hcd */
 #define ED_DEQUEUE	(1 << 27)
 	/* info bits defined by the hardware */
@@ -52,11 +52,11 @@ struct ed {
 	 * usually:  OPER --> UNLINK --> (IDLE | OPER) --> ...
 	 */
 	u8			state;		/* ED_{IDLE,UNLINK,OPER} */
-#define ED_IDLE 	0x00		/* NOT linked to HC */
-#define ED_UNLINK 	0x01		/* being unlinked from hc */
+#define ED_IDLE		0x00		/* NOT linked to HC */
+#define ED_UNLINK	0x01		/* being unlinked from hc */
 #define ED_OPER		0x02		/* IS linked to hc */
 
-	u8			type; 		/* PIPE_{BULK,...} */
+	u8			type;		/* PIPE_{BULK,...} */
 
 	/* periodic scheduling params (for intr and iso) */
 	u8			branch;
@@ -70,7 +70,7 @@ struct ed {
 
 #define ED_MASK	((u32)~0x0f)		/* strip hw status in low addr bits */
 
- 
+
 /*
  * OHCI Transfer Descriptor (TD) ... one per transfer segment
  * See OHCI spec, sections 4.3.1 (general = control/bulk/interrupt)
@@ -107,22 +107,22 @@ struct td {
 
 	/* (no hwINFO #defines yet for iso tds) */
 
-  	__hc32		hwCBP;		/* Current Buffer Pointer (or 0) */
-  	__hc32		hwNextTD;	/* Next TD Pointer */
-  	__hc32		hwBE;		/* Memory Buffer End Pointer */
+	__hc32		hwCBP;		/* Current Buffer Pointer (or 0) */
+	__hc32		hwNextTD;	/* Next TD Pointer */
+	__hc32		hwBE;		/* Memory Buffer End Pointer */
 
 	/* PSW is only for ISO.  Only 1 PSW entry is used, but on
 	 * big-endian PPC hardware that's the second entry.
 	 */
 #define MAXPSW	2
-  	__hc16		hwPSW [MAXPSW];
+	__hc16		hwPSW [MAXPSW];
 
 	/* rest are purely for the driver's use */
-  	__u8		index;
-  	struct ed	*ed;
-  	struct td	*td_hash;	/* dma-->td hashtable */
-  	struct td	*next_dl_td;
-  	struct urb	*urb;
+	__u8		index;
+	struct ed	*ed;
+	struct td	*td_hash;	/* dma-->td hashtable */
+	struct td	*next_dl_td;
+	struct urb	*urb;
 
 	dma_addr_t	td_dma;		/* addr of this TD */
 	dma_addr_t	data_dma;	/* addr of data it points to */
@@ -152,8 +152,8 @@ struct td {
 #define TD_NOTACCESSED     0x0F
 
 
-/* map OHCI TD status codes (CC) to errno values */ 
-static const int cc_to_error [16] = { 
+/* map OHCI TD status codes (CC) to errno values */
+static const int cc_to_error [16] = {
 	/* No  Error  */               0,
 	/* CRC Error  */               -EILSEQ,
 	/* Bit Stuff  */               -EPROTO,
@@ -169,7 +169,7 @@ static const int cc_to_error [16] = {
 	/* BufferOver */               -ECOMM,
 	/* BuffUnder  */               -ENOSR,
 	/* (for HCD)  */               -EALREADY,
-	/* (for HCD)  */               -EALREADY 
+	/* (for HCD)  */               -EALREADY
 };
 
 
@@ -182,7 +182,7 @@ struct ohci_hcca {
 #define NUM_INTS 32
 	__hc32	int_table [NUM_INTS];	/* periodic schedule */
 
-	/* 
+	/*
 	 * OHCI defines u16 frame_no, followed by u16 zero pad.
 	 * Since some processors can't do 16 bit bus accesses,
 	 * portable access must be a 32 bits wide.
@@ -262,10 +262,10 @@ struct ohci_regs {
  * HcCommandStatus (cmdstatus) register masks
  */
 #define OHCI_HCR	(1 << 0)	/* host controller reset */
-#define OHCI_CLF  	(1 << 1)	/* control list filled */
-#define OHCI_BLF  	(1 << 2)	/* bulk list filled */
-#define OHCI_OCR  	(1 << 3)	/* ownership change request */
-#define OHCI_SOC  	(3 << 16)	/* scheduling overrun count */
+#define OHCI_CLF	(1 << 1)	/* control list filled */
+#define OHCI_BLF	(1 << 2)	/* bulk list filled */
+#define OHCI_OCR	(1 << 3)	/* ownership change request */
+#define OHCI_SOC	(3 << 16)	/* scheduling overrun count */
 
 /*
  * masks used with interrupt registers:
@@ -285,20 +285,20 @@ struct ohci_regs {
 
 
 /* OHCI ROOT HUB REGISTER MASKS */
- 
+
 /* roothub.portstatus [i] bits */
-#define RH_PS_CCS            0x00000001   	/* current connect status */
-#define RH_PS_PES            0x00000002   	/* port enable status*/
-#define RH_PS_PSS            0x00000004   	/* port suspend status */
-#define RH_PS_POCI           0x00000008   	/* port over current indicator */
-#define RH_PS_PRS            0x00000010  	/* port reset status */
-#define RH_PS_PPS            0x00000100   	/* port power status */
-#define RH_PS_LSDA           0x00000200    	/* low speed device attached */
-#define RH_PS_CSC            0x00010000 	/* connect status change */
-#define RH_PS_PESC           0x00020000   	/* port enable status change */
-#define RH_PS_PSSC           0x00040000    	/* port suspend status change */
-#define RH_PS_OCIC           0x00080000    	/* over current indicator change */
-#define RH_PS_PRSC           0x00100000   	/* port reset status change */
+#define RH_PS_CCS            0x00000001		/* current connect status */
+#define RH_PS_PES            0x00000002		/* port enable status*/
+#define RH_PS_PSS            0x00000004		/* port suspend status */
+#define RH_PS_POCI           0x00000008		/* port over current indicator */
+#define RH_PS_PRS            0x00000010		/* port reset status */
+#define RH_PS_PPS            0x00000100		/* port power status */
+#define RH_PS_LSDA           0x00000200		/* low speed device attached */
+#define RH_PS_CSC            0x00010000		/* connect status change */
+#define RH_PS_PESC           0x00020000		/* port enable status change */
+#define RH_PS_PSSC           0x00040000		/* port suspend status change */
+#define RH_PS_OCIC           0x00080000		/* over current indicator change */
+#define RH_PS_PRSC           0x00100000		/* port reset status change */
 
 /* roothub.status bits */
 #define RH_HS_LPS	     0x00000001		/* local power status */
@@ -333,7 +333,7 @@ typedef struct urb_priv {
 } urb_priv_t;
 
 #define TD_HASH_SIZE    64    /* power'o'two */
-// sizeof (struct td) ~= 64 == 2^6 ... 
+// sizeof (struct td) ~= 64 == 2^6 ...
 #define TD_HASH_FUNC(td_dma) ((td_dma ^ (td_dma >> 6)) % TD_HASH_SIZE)
 
 
@@ -364,11 +364,11 @@ struct ohci_hcd {
 
 	struct ed		*ed_bulktail;		/* last in bulk list */
 	struct ed		*ed_controltail;	/* last in ctrl list */
- 	struct ed		*periodic [NUM_INTS];	/* shadow int_table */
+	struct ed		*periodic [NUM_INTS];	/* shadow int_table */
 
 	/*
 	 * OTG controllers and transceivers need software interaction;
-	 * other external transceivers should be software-transparent 
+	 * other external transceivers should be software-transparent
 	 */
 	struct otg_transceiver	*transceiver;
 
@@ -385,7 +385,7 @@ struct ohci_hcd {
 	 */
 	int			num_ports;
 	int			load [NUM_INTS];
-	u32 			hc_control;	/* copy of hc control reg */
+	u32			hc_control;	/* copy of hc control reg */
 	unsigned long		next_statechange;	/* suspend/resume */
 	u32			fminterval;		/* saved register */
 	unsigned		autostop:1;	/* rh auto stopping/stopped */
@@ -598,7 +598,7 @@ static inline void disable (struct ohci_hcd *ohci)
 }
 
 #define	FI			0x2edf		/* 12000 bits per frame (-1) */
-#define	FSMP(fi) 		(0x7fff & ((6 * ((fi) - 210)) / 7))
+#define	FSMP(fi)		(0x7fff & ((6 * ((fi) - 210)) / 7))
 #define	FIT			(1 << 31)
 #define LSTHRESH		0x628		/* lowspeed bit threshold */