Commit ddc4b477 authored by Linus Torvalds's avatar Linus Torvalds

Merge bk://kernel.bkbits.net/davem/net-2.5

into home.transmeta.com:/home/torvalds/v2.5/linux
parents 1de95269 df42471d
......@@ -828,13 +828,27 @@ static void pci_do_settimeofday(struct timeval *tv)
* made, and then undo it!
*/
tv->tv_usec -= do_gettimeoffset();
tv->tv_usec -= (jiffies - wall_jiffies) * (1000000 / HZ);
tv->tv_usec -= (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ);
while (tv->tv_usec < 0) {
tv->tv_usec += 1000000;
tv->tv_usec += USEC_PER_SEC;
tv->tv_sec--;
}
tv->tv_usec *= NSEC_PER_USEC;
wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_usec;
if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
wall_to_monotonic.tv_sec++;
}
if (wall_to_monotonic.tv_nsec < 0) {
wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
wall_to_monotonic.tv_sec--;
}
xtime.tv_sec = tv->tv_sec;
xtime.tv_nsec = (tv->tv_usec * 1000);
xtime.tv_nsec = tv->tv_usec;
time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
......
......@@ -408,7 +408,9 @@ void __init sbus_time_init(void)
mon = MSTK_REG_MONTH(mregs);
year = MSTK_CVT_YEAR( MSTK_REG_YEAR(mregs) );
xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
xtime.tv_nsec = 0;
wall_to_monotonic.tv_sec = -xtime.tv_sec + INITIAL_JIFFIES / HZ;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
wall_to_monotonic.tv_nsec = 0;
mregs->creg &= ~MSTK_CREG_READ;
spin_unlock_irq(&mostek_lock);
#ifdef CONFIG_SUN4
......@@ -439,7 +441,9 @@ void __init sbus_time_init(void)
intersil_start(iregs);
xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
xtime.tv_nsec = 0;
wall_to_monotonic.tv_sec = -xtime.tv_sec + INITIAL_JIFFIES / HZ;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
wall_to_monotonic.tv_nsec = 0;
printk("%u/%u/%u %u:%u:%u\n",day,mon,year,hour,min,sec);
}
#endif
......@@ -512,13 +516,28 @@ static void sbus_do_settimeofday(struct timeval *tv)
* made, and then undo it!
*/
tv->tv_usec -= do_gettimeoffset();
tv->tv_usec -= (jiffies - wall_jiffies) * (1000000 / HZ);
tv->tv_usec -= (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ);
while (tv->tv_usec < 0) {
tv->tv_usec += 1000000;
tv->tv_usec += USEC_PER_SEC;
tv->tv_sec--;
}
tv->tv_usec *= NSEC_PER_USEC;
wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_usec;
if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
wall_to_monotonic.tv_sec++;
}
if (wall_to_monotonic.tv_nsec < 0) {
wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
wall_to_monotonic.tv_sec--;
}
xtime.tv_sec = tv->tv_sec;
xtime.tv_nsec = (tv->tv_usec * 1000);
xtime.tv_nsec = tv->tv_usec;
time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
......
......@@ -334,7 +334,30 @@ CONFIG_FUSION_LAN=m
#
# IEEE 1394 (FireWire) support (EXPERIMENTAL)
#
# CONFIG_IEEE1394 is not set
CONFIG_IEEE1394=m
#
# Subsystem Options
#
# CONFIG_IEEE1394_VERBOSEDEBUG is not set
CONFIG_IEEE1394_OUI_DB=y
#
# Device Drivers
#
CONFIG_IEEE1394_OHCI1394=m
#
# Protocol Drivers
#
CONFIG_IEEE1394_VIDEO1394=m
CONFIG_IEEE1394_SBP2=m
# CONFIG_IEEE1394_SBP2_PHYS_DMA is not set
CONFIG_IEEE1394_ETH1394=m
CONFIG_IEEE1394_DV1394=m
CONFIG_IEEE1394_RAWIO=m
CONFIG_IEEE1394_CMP=m
CONFIG_IEEE1394_AMDTP=m
#
# Networking support
......
......@@ -224,7 +224,7 @@ int chmc_getunumber(int syndrome_code,
int dimm;
/* Multi-bit error, we just dump out all the
* dimm labels assosciated with this bank.
* dimm labels associated with this bank.
*/
for (dimm = 0; dimm < CHMCTRL_NDIMMS; dimm++) {
sprintf(buf, "%s ",
......
......@@ -1264,7 +1264,7 @@ dcpe_icpe_tl1_common:
* because corrupt data may have been placed there and we don't
* want to reference it.
*
* %g1 is one if this trap occured at %tl >= 1.
* %g1 is one if this trap occurred at %tl >= 1.
*
* Next, we turn off error reporting so that we don't recurse.
*/
......
......@@ -84,7 +84,7 @@ sparc64_boot:
nop
cheetah_plus_boot:
/* Preserve OBP choosen DCU and DCR register settings. */
/* Preserve OBP chosen DCU and DCR register settings. */
ba,pt %xcc, cheetah_generic_boot
nop
......
......@@ -3137,7 +3137,7 @@ typedef struct drm32_dma {
#define DRM32_IOCTL_DMA DRM_IOWR(0x29, drm32_dma_t)
/* RED PEN The DRM layer blindly dereferences the send/request
* indice/size arrays even though they are userland
* index/size arrays even though they are userland
* pointers. -DaveM
*/
static int drm32_dma(unsigned int fd, unsigned int cmd, unsigned long arg)
......@@ -4243,6 +4243,8 @@ COMPATIBLE_IOCTL(DVD_AUTH)
/* Big L */
COMPATIBLE_IOCTL(LOOP_SET_FD)
COMPATIBLE_IOCTL(LOOP_CLR_FD)
COMPATIBLE_IOCTL(LOOP_SET_STATUS64)
COMPATIBLE_IOCTL(LOOP_GET_STATUS64)
/* Big A */
COMPATIBLE_IOCTL(AUDIO_GETINFO)
COMPATIBLE_IOCTL(AUDIO_SETINFO)
......
......@@ -145,7 +145,7 @@ static void __init pdev_cookie_fillin(struct pci_pbm_info *pbm,
* there must be a damn good reason for it.
*
* So what we do is delete the device from the
* PCI device tree completely. This scenerio
* PCI device tree completely. This scenario
* is seen, for example, on CP1500 for the
* second EBUS/HappyMeal pair if the external
* connector for it is not present.
......
......@@ -854,7 +854,7 @@ static irqreturn_t psycho_ce_intr(int irq, void *dev_id, struct pt_regs *regs)
}
/* PCI Errors. They are signalled by the PCI bus module since they
* are assosciated with a specific bus segment.
* are associated with a specific bus segment.
*/
#define PSYCHO_PCI_AFSR_A 0x2010UL
#define PSYCHO_PCI_AFSR_B 0x4010UL
......
......@@ -6,7 +6,7 @@
* Based upon code written by Ross Biro, Linus Torvalds, Bob Manson,
* and David Mosberger.
*
* Added Linux support -miguel (weird, eh?, the orignal code was meant
* Added Linux support -miguel (weird, eh?, the original code was meant
* to emulate SunOS).
*/
......
......@@ -210,7 +210,7 @@ __handle_user_windows_continue:
__handle_perfctrs_continue:
andcc %l1, %o0, %g0
/* This fpdepth clear is neccessary for non-syscall rtraps only */
/* This fpdepth clear is necessary for non-syscall rtraps only */
user_nowork:
bne,pn %xcc, __handle_userfpu
stb %g0, [%g6 + TI_FPDEPTH]
......
......@@ -728,7 +728,7 @@ static unsigned long sysio_irq_offsets[] = {
#define NUM_SYSIO_OFFSETS (sizeof(sysio_irq_offsets) / sizeof(sysio_irq_offsets[0]))
/* Convert Interrupt Mapping register pointer to assosciated
/* Convert Interrupt Mapping register pointer to associated
* Interrupt Clear register pointer, SYSIO specific version.
*/
#define SYSIO_ICLR_UNUSED0 0x3400UL
......@@ -1098,7 +1098,7 @@ void __init sbus_iommu_init(int prom_node, struct sbus_bus *sbus)
prom_halt();
}
/* Align on E$ line boundry. */
/* Align on E$ line boundary. */
iommu = (struct sbus_iommu *)
(((unsigned long)iommu + (SMP_CACHE_BYTES - 1UL)) &
~(SMP_CACHE_BYTES - 1UL));
......
......@@ -1071,7 +1071,7 @@ void smp_percpu_timer_interrupt(struct pt_regs *regs)
prof_counter(cpu) = prof_multiplier(cpu);
}
/* Guarentee that the following sequences execute
/* Guarantee that the following sequences execute
* uninterrupted.
*/
__asm__ __volatile__("rdpr %%pstate, %0\n\t"
......@@ -1096,7 +1096,7 @@ static void __init smp_setup_percpu_timer(void)
prof_counter(cpu) = prof_multiplier(cpu) = 1;
/* Guarentee that the following sequences execute
/* Guarantee that the following sequences execute
* uninterrupted.
*/
__asm__ __volatile__("rdpr %%pstate, %0\n\t"
......
......@@ -489,7 +489,7 @@ static irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs * regs)
#endif
do_timer(regs);
/* Guarentee that the following sequences execute
/* Guarantee that the following sequences execute
* uninterrupted.
*/
__asm__ __volatile__("rdpr %%pstate, %0\n\t"
......@@ -703,7 +703,9 @@ static void __init set_system_time(void)
}
xtime.tv_sec = mktime(year, mon, day, hour, min, sec);
xtime.tv_nsec = 0;
wall_to_monotonic.tv_sec = -xtime.tv_sec + INITIAL_JIFFIES / HZ;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
wall_to_monotonic.tv_nsec = 0;
if (mregs) {
tmp = mostek_read(mregs + MOSTEK_CREG);
......@@ -741,7 +743,9 @@ void __init clock_probe(void)
(unsigned int) (long) &unix_tod);
prom_feval(obp_gettod);
xtime.tv_sec = unix_tod;
xtime.tv_nsec = 0;
wall_to_monotonic.tv_sec = -xtime.tv_sec + INITIAL_JIFFIES / HZ;
xtime.tv_nsec = (INITIAL_JIFFIES % HZ) * (NSEC_PER_SEC / HZ);
wall_to_monotonic.tv_nsec = 0;
return;
}
......@@ -972,7 +976,7 @@ static unsigned long sparc64_init_timers(irqreturn_t (*cfunc)(int, void *, struc
prom_halt();
}
/* Guarentee that the following sequences execute
/* Guarantee that the following sequences execute
* uninterrupted.
*/
__asm__ __volatile__("rdpr %%pstate, %0\n\t"
......@@ -1097,15 +1101,28 @@ void do_settimeofday(struct timeval *tv)
* made, and then undo it!
*/
tv->tv_usec -= do_gettimeoffset();
tv->tv_usec -= (jiffies - wall_jiffies) * (1000000 / HZ);
tv->tv_usec -= (jiffies - wall_jiffies) * (USEC_PER_SEC / HZ);
while (tv->tv_usec < 0) {
tv->tv_usec += 1000000;
tv->tv_usec += USEC_PER_SEC;
tv->tv_sec--;
}
tv->tv_usec *= NSEC_PER_USEC;
wall_to_monotonic.tv_sec += xtime.tv_sec - tv->tv_sec;
wall_to_monotonic.tv_nsec += xtime.tv_nsec - tv->tv_usec;
if (wall_to_monotonic.tv_nsec > NSEC_PER_SEC) {
wall_to_monotonic.tv_nsec -= NSEC_PER_SEC;
wall_to_monotonic.tv_sec++;
}
if (wall_to_monotonic.tv_nsec < 0) {
wall_to_monotonic.tv_nsec += NSEC_PER_SEC;
wall_to_monotonic.tv_sec--;
}
xtime.tv_sec = tv->tv_sec;
xtime.tv_nsec = (tv->tv_usec * 1000);
xtime.tv_nsec = tv->tv_usec;
time_adjust = 0; /* stop active adjtime() */
time_status |= STA_UNSYNC;
time_maxerror = NTP_PHASE_LIMIT;
......
......@@ -40,7 +40,7 @@ sparc64_cpu_startup:
nop
cheetah_plus_startup:
/* Preserve OBP choosen DCU and DCR register settings. */
/* Preserve OBP chosen DCU and DCR register settings. */
ba,pt %xcc, cheetah_generic_startup
nop
......
......@@ -6,7 +6,7 @@
* Copyright (c) 2002 Pete Zaitcev (zaitcev@yahoo.com)
*
* We used to warn all over the code: DO NOT USE prom_printf(),
* and yet people do. Anton's banking code was outputing banks
* and yet people do. Anton's banking code was outputting banks
* with prom_printf for most of the 2.4 lifetime. Since an effective
* stick is not available, we deployed a carrot: an early printk
* through PROM by means of -p boot option. This ought to fix it.
......
/* $Id: misc.c,v 1.36 2002/02/09 19:49:31 davem Exp $
* misc.c: Miscelaneous syscall emulation for Solaris
* misc.c: Miscellaneous syscall emulation for Solaris
*
* Copyright (C) 1997,1998 Jakub Jelinek (jj@sunsite.mff.cuni.cz)
*/
......
......@@ -2164,8 +2164,7 @@ int end_that_request_chunk(struct request *req, int uptodate, int nr_bytes)
void end_that_request_last(struct request *req)
{
struct gendisk *disk = req->rq_disk;
if (req->waiting)
complete(req->waiting);
struct completion *waiting = req->waiting;
if (disk) {
unsigned long duration = jiffies - req->start_time;
......@@ -2183,6 +2182,9 @@ void end_that_request_last(struct request *req)
disk_stat_dec(disk, in_flight);
}
__blk_put_request(req->q, req);
/* Do this LAST! The structure may be freed immediately afterwards */
if (waiting)
complete(waiting);
}
int __init blk_dev_init(void)
......
......@@ -149,6 +149,7 @@ struct cardinfo {
spinlock_t lock;
int check_batteries;
int flags;
};
static struct cardinfo cards[MM_MAXCARDS];
......@@ -573,7 +574,7 @@ static int mm_make_request(request_queue_t *q, struct bio *bio)
-- mm_interrupt
-----------------------------------------------------------------------------------
*/
static void mm_interrupt(int irq, void *__card, struct pt_regs *regs)
static irqreturn_t mm_interrupt(int irq, void *__card, struct pt_regs *regs)
{
struct cardinfo *card = (struct cardinfo *) __card;
unsigned int dma_status;
......@@ -585,13 +586,16 @@ HW_TRACE(0x30);
if (!(dma_status & (DMASCR_ERROR_MASK | DMASCR_CHAIN_COMPLETE))) {
/* interrupt wasn't for me ... */
return;
return IRQ_NONE;
}
/* clear COMPLETION interrupts */
writel(cpu_to_le32(DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE),
card->csr_remap+ DMA_STATUS_CTRL);
if (card->flags & UM_FLAG_NO_BYTE_STATUS)
writel(cpu_to_le32(DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE),
card->csr_remap+ DMA_STATUS_CTRL);
else
writeb((DMASCR_DMA_COMPLETE|DMASCR_CHAIN_COMPLETE) >> 16,
card->csr_remap+ DMA_STATUS_CTRL + 2);
/* log errors and clear interrupt status */
if (dma_status & DMASCR_ANY_ERR) {
......@@ -663,6 +667,7 @@ HW_TRACE(0x30);
HW_TRACE(0x36);
return IRQ_HANDLED;
}
/*
-----------------------------------------------------------------------------------
......@@ -755,15 +760,16 @@ static void check_all_batteries(unsigned long ptr)
{
int i;
for (i = 0; i < num_cards; i++) {
struct cardinfo *card = &cards[i];
spin_lock_bh(&card->lock);
if (card->Active >= 0)
card->check_batteries = 1;
else
check_batteries(card);
spin_unlock_bh(&card->lock);
}
for (i = 0; i < num_cards; i++)
if (!(cards[i].flags & UM_FLAG_NO_BATT)) {
struct cardinfo *card = &cards[i];
spin_lock_bh(&card->lock);
if (card->Active >= 0)
card->check_batteries = 1;
else
check_batteries(card);
spin_unlock_bh(&card->lock);
}
init_battery_timer();
}
......@@ -869,6 +875,7 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
unsigned char mem_present;
unsigned char batt_status;
unsigned int saved_bar, data;
int magic_number;
if (pci_enable_device(dev) < 0)
return -ENODEV;
......@@ -933,12 +940,33 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
printk(KERN_INFO "MM%d: MEM area not remapped (CONFIG_MM_MAP_MEMORY not set)\n",
card->card_number);
#endif
if (readb(card->csr_remap + MEMCTRLSTATUS_MAGIC) != MM_MAGIC_VALUE) {
switch(card->dev->device) {
case 0x5415:
card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG;
magic_number = 0x59;
break;
case 0x5425:
card->flags |= UM_FLAG_NO_BYTE_STATUS;
magic_number = 0x5C;
break;
case 0x6155:
card->flags |= UM_FLAG_NO_BYTE_STATUS | UM_FLAG_NO_BATTREG | UM_FLAG_NO_BATT;
magic_number = 0x99;
break;
default:
magic_number = 0x100;
break;
}
if (readb(card->csr_remap + MEMCTRLSTATUS_MAGIC) != magic_number) {
printk(KERN_ERR "MM%d: Magic number invalid\n", card->card_number);
ret = -ENOMEM;
goto failed_magic;
}
card->mm_pages[0].desc = pci_alloc_consistent(card->dev,
PAGE_SIZE*2,
&card->mm_pages[0].page_dma);
......@@ -997,14 +1025,19 @@ static int __devinit mm_pci_probe(struct pci_dev *dev, const struct pci_device_i
card->battery[1].good = !(batt_status & BATTERY_2_FAILURE);
card->battery[0].last_change = card->battery[1].last_change = jiffies;
printk(KERN_INFO "MM%d: Size %d KB, Battery 1 %s (%s), Battery 2 %s (%s)\n",
card->card_number, card->mm_size,
(batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled"),
card->battery[0].good ? "OK" : "FAILURE",
(batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled"),
card->battery[1].good ? "OK" : "FAILURE");
if (card->flags & UM_FLAG_NO_BATT)
printk(KERN_INFO "MM%d: Size %d KB\n",
card->card_number, card->mm_size);
else {
printk(KERN_INFO "MM%d: Size %d KB, Battery 1 %s (%s), Battery 2 %s (%s)\n",
card->card_number, card->mm_size,
(batt_status & BATTERY_1_DISABLED ? "Disabled" : "Enabled"),
card->battery[0].good ? "OK" : "FAILURE",
(batt_status & BATTERY_2_DISABLED ? "Disabled" : "Enabled"),
card->battery[1].good ? "OK" : "FAILURE");
set_fault_to_battery_status(card);
set_fault_to_battery_status(card);
}
pci_read_config_dword(dev, PCI_BASE_ADDRESS_1, &saved_bar);
data = 0xffffffff;
......@@ -1117,6 +1150,16 @@ static const struct pci_device_id __devinitdata mm_pci_ids[] = { {
}, {
.vendor = PCI_VENDOR_ID_MICRO_MEMORY,
.device = PCI_DEVICE_ID_MICRO_MEMORY_5425CN,
}, {
.vendor = PCI_VENDOR_ID_MICRO_MEMORY,
.device = PCI_DEVICE_ID_MICRO_MEMORY_6155,
}, {
.vendor = 0x8086,
.device = 0xB555,
.subvendor= 0x1332,
.subdevice= 0x5460,
.class = 0x050000,
.class_mask= 0,
}, { /* end: all zeroes */ }
};
......
......@@ -1240,8 +1240,21 @@ int txCommit(tid_t tid, /* transaction identifier */
* Ensure that inode isn't reused before
* lazy commit thread finishes processing
*/
if (tblk->xflag & (COMMIT_CREATE | COMMIT_DELETE))
if (tblk->xflag & (COMMIT_CREATE | COMMIT_DELETE)) {
atomic_inc(&tblk->ip->i_count);
/*
* Avoid a rare deadlock
*
* If the inode is locked, we may be blocked in
* jfs_commit_inode. If so, we don't want the
* lazy_commit thread doing the last iput() on the inode
* since that may block on the locked inode. Instead,
* commit the transaction synchronously, so the last iput
* will be done by the calling thread (or later)
*/
if (tblk->ip->i_state & I_LOCK)
tblk->xflag &= ~COMMIT_LAZY;
}
ASSERT((!(tblk->xflag & COMMIT_DELETE)) ||
((tblk->ip->i_nlink == 0) &&
......
......@@ -102,13 +102,13 @@
#define ASI_PST8_P 0xc0 /* Primary, 8 8-bit, partial */
#define ASI_PST8_S 0xc1 /* Secondary, 8 8-bit, partial */
#define ASI_PST16_P 0xc2 /* Primary, 4 16-bit, partial */
#define ASI_PST16_S 0xc3 /* Seconary, 4 16-bit, partial */
#define ASI_PST16_S 0xc3 /* Secondary, 4 16-bit, partial */
#define ASI_PST32_P 0xc4 /* Primary, 2 32-bit, partial */
#define ASI_PST32_S 0xc5 /* Secondary, 2 32-bit, partial */
#define ASI_PST8_PL 0xc8 /* Primary, 8 8-bit, partial, little */
#define ASI_PST8_SL 0xc9 /* Secondary, 8 8-bit, partial, little */
#define ASI_PST16_PL 0xca /* Primary, 4 16-bit, partial, little */
#define ASI_PST16_SL 0xcb /* Seconary, 4 16-bit, partial, little */
#define ASI_PST16_SL 0xcb /* Secondary, 4 16-bit, partial, little */
#define ASI_PST32_PL 0xcc /* Primary, 2 32-bit, partial, little */
#define ASI_PST32_SL 0xcd /* Secondary, 2 32-bit, partial, little */
#define ASI_FL8_P 0xd0 /* Primary, 1 8-bit, fpu ld/st */
......
......@@ -17,7 +17,7 @@
* with compliant or compatible devices. It will use whatever features
* the device supports, prefering those that are typically faster.
*
* When the device is opened, it is left in COMPATABILITY mode, and
* When the device is opened, it is left in COMPATIBILITY mode, and
* writes work like any printer device. The driver only attempt to
* negotiate 1284 modes when needed so that plugs can be pulled,
* switch boxes switched, etc., without disrupting things. It will
......
......@@ -61,7 +61,7 @@
/* Uncorrectable system bus data ECC error for read of interrupt vector */
#define CHAFSR_IVU 0x0000200000000000
/* Unmappeed error from system bus */
/* Unmapped error from system bus */
#define CHAFSR_TO 0x0000100000000000
/* Bus error response from system bus */
......@@ -127,7 +127,7 @@
/* The AFSR must be explicitly cleared by software, it is not cleared automatically
* by a read. Writes to bits <51:33> with bits set will clear the corresponding
* bits in the AFSR. Bits assosciated with disrupting traps must be cleared before
* bits in the AFSR. Bits associated with disrupting traps must be cleared before
* interrupts are re-enabled to prevent multiple traps for the same error. I.e.
* PSTATE.IE and AFSR bits control delivery of disrupting traps.
*
......
......@@ -15,7 +15,7 @@
* errors 2) uncorrectable E-cache errors. Such events only occur on reads
* of the E-cache by the local processor for: 1) data loads 2) instruction
* fetches 3) atomic operations. Such events _cannot_ occur for: 1) merge
* 2) writeback 2) copyout. The AFSR bits assosciated with these traps are
* 2) writeback 2) copyout. The AFSR bits associated with these traps are
* UCC and UCU.
*/
......@@ -31,7 +31,7 @@
* 4) As the result of such errors on instruction vector fetch can generate any
* of the 3 trap types.
*
* The AFSR bits assosciated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
* The AFSR bits associated with these traps are EMU, EDU, WDU, CPU, IVU, UE,
* BERR, and TO.
*/
......
......@@ -9,7 +9,7 @@
#define _SPARC_NS87303_H 1
/*
* Controll Register Index Values
* Control Register Index Values
*/
#define FER 0x00
#define FAR 0x01
......@@ -58,7 +58,7 @@
#define TUP_EPP_TIMO 0x02 /* Enable EPP timeout IRQ */
/* Advanced SuperIO Config Register (ASC) bits */
#define ASC_LPT_IRQ7 0x01 /* Allways use IRQ7 for LPT */
#define ASC_LPT_IRQ7 0x01 /* Always use IRQ7 for LPT */
#define ASC_DRV2_SEL 0x02 /* Logical Drive Exchange controlled by TDR */
#define FER_RESERVED 0x00
......
......@@ -50,7 +50,7 @@ extern void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size, dma_addr_t
* size must be the same as what as passed into pci_alloc_consistent,
* and likewise dma_addr must be the same as what *dma_addrp was set to.
*
* References to the memory and mappings assosciated with cpu_addr/dma_addr
* References to the memory and mappings associated with cpu_addr/dma_addr
* past this call are illegal.
*/
extern void pci_free_consistent(struct pci_dev *hwdev, size_t size, void *vaddr, dma_addr_t dma_handle);
......@@ -92,7 +92,7 @@ extern void pci_unmap_single(struct pci_dev *hwdev, dma_addr_t dma_addr, size_t
(((PTR)->LEN_NAME) = (VAL))
/* Map a set of buffers described by scatterlist in streaming
* mode for DMA. This is the scather-gather version of the
* mode for DMA. This is the scatter-gather version of the
* above pci_map_single interface. Here the scatter gather list
* elements are each tagged with the appropriate dma address
* and length. They are obtained via sg_dma_{address,length}(SG).
......
......@@ -85,7 +85,7 @@ enum svr4_stack_flags {
SVR4_SS_DISABLE,
};
/* signal stack exection place, unsupported */
/* signal stack execution place, unsupported */
typedef struct svr4_stack_t {
char *sp;
int size;
......
......@@ -21,7 +21,7 @@
#define UPA_PORTID_PREQDQ 0x000000007e000000 /* slave-wr's to mod supported */
#define UPA_PORTID_PREQRD 0x0000000001e00000 /* # incoming P_REQ's supported */
#define UPA_PORTID_UPACAP 0x00000000001f0000 /* UPA capabilities of mod */
#define UPA_PORTID_ID 0x000000000000ffff /* Module Indentification bits */
#define UPA_PORTID_ID 0x000000000000ffff /* Module Identification bits */
/* UPA I/O space accessors */
#if defined(__KERNEL__) && !defined(__ASSEMBLY__)
......
......@@ -128,4 +128,11 @@ struct mm_dma_desc {
#define PCI_VENDOR_ID_MICRO_MEMORY 0x1332
#define PCI_DEVICE_ID_MICRO_MEMORY_5415CN 0x5415
#define PCI_DEVICE_ID_MICRO_MEMORY_5425CN 0x5425
#define PCI_DEVICE_ID_MICRO_MEMORY_6155 0x6155
/* bits for card->flags */
#define UM_FLAG_DMA_IN_REGS 1
#define UM_FLAG_NO_BYTE_STATUS 2
#define UM_FLAG_NO_BATTREG 4
#define UM_FLAG_NO_BATT 8
#endif
Markdown is supported
0%
or
You are about to add 0 people to the discussion. Proceed with caution.
Finish editing this message first!
Please register or to comment